How to Check a Wheel Bearing (Sound, play in the wheel, ABS light)

Wheel bearing noise? Learn how to find and how to tell if your wheel bearing is bad. I show you what the wheel bearing noise sounds like while driving, what the play in the wheel looks like, and how to check the abs light if you have one. I also go over a few other tips about the wheel bearing so you can tell if yours is bad or not.
Scanner I used to check the ABS light: amzn.to/1XNUGfz
How to Replace a Wheel Bearing: • How to Replace a Front...
What Abuse Does Your Suspension Take Every Day: • What Abuse Does Your S...
How to Check a Ball Joint: • How to Check if a Ball...
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: kzbin.info_c...
-KZbin Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

[@tayzirov]

this is the most thorough and impressive auto repair channel ive seen. serious props

[@chrisfix]

Thanks a lot!

[@melanie83076]

I agree with tayzirov. you do an excellent job of explaining things on a level people that aren't mechanically inclined can understand.

[@oyngopogo]

Excellent thank you!!!!!!

[@briantownsend1514]

Love the audio, great quality

[@Yanbrymenocu]

@@briantownsend1514 my bearings are both brand new but they still have sound maybe there is no grease inside the wheel hub

[@nercopolis99]

This is such an excellent video, honestly too many small details were nailed to list them all but here's a few: -Straight to the information and very dense without being overwhelming -Clear, concise, knowledgeable speaker -Great demonstrations -Perfect editing Props. This is so well done that it's more entertaining than 90% of videos that are actually supposed to be entertaining.

[@chrisfix]

Thanks a lot

[@rlewis1946]

Wow! You took the words right out of my mouth! (But you did a better job!) 👏👏 First rate, Five Star Video, Chris. Thank you for your excellent videos. No wonder why you have millions and millions of fans! RL Buffalo, NY

[@MiguelLopez-sj2ib]

Get off his deick

[@Fern635]

Reviving an old comment to agree. Very informative, well-made video.

[@michaelatkin9649]

I figured out how Chris got so good at working on cars. He owns all Fords lol

[@beastiemcgee544]

Ahh

[@iamyzdemon5717]

He started out with a 90s civic

[@motojaymn4131]

Can't forget about the corvette

[@Desireebaa]

Hilarious 😂

[@TheOuterWaves]

I couldn't hear the video over my wheel bearing😂

[@Da_Homie_Chuy]

Lmao

[@305daballa]

😂😂😂😂😂😂🤦🏾‍♂️

[@marinusscholtz9342]

🤣🤣🤣🤣🤣🤣

[@blakeloy6539]

i think it's fine👍😂

[@vgiron4979]

lol

[@missdee555]

I've never done mechanics in my life and followed your tutorials step by step. You have saved me thousands. Thank you so much 🤗

[@venusissabeastm9762]

I know I wasnt freaking out when I presented this to my mechanic they told me it was just the air. I knew that it didnt sound right. Thank you ChrisFix!

[@blake102989]

Surprised they didn’t try to tell you it was 4 different things to get as much money outta you as they could

[@tytorubio3271]

Change mechanic!

[@UnpaidInternn]

You need a new mechanic for sure.

[@ColtonRMagby]

That mechanic doesn't know jack about the importance of bearings.

[@slyspy9819]

Hey Chris , I must say you are leaps and bounds above any other mechanical advice I find on the internet . Your explanation of issues is simple and precise without a lot of idle talk , you're a pro .....thanks

[@chrisfix]

Thanks a lot!

[@slyspy9819]

@@chrisfix You're welcome , right now I'm watching how to replace wheel bearing by you , solid and sound instruction .Chris your channel is worth paying for (ha) I mean it

[@goesfastandfar]

VERY thorough explanation that's easy to follow and understand. This guy should have a weekly TV show. Well done!

[@kjlanier1975]

I am NOT a mechanic by any stretch of the word, but i really appreciate how you get detailed in detecting and diagnosing the problems, as well as showing us how to detect them as well. I suspected my bearings were going out on my 2010 Chrysler Sebring, and sure enough, they are. Thank you for this video, as well as how to replace them.

[@paulfedyakov6434]

Chris fix you are the man, I love how descriptive you are. VERY HELPFUL

[@dave_in_az]

Chris Fix is the best car-repair video maker I've ever seen! Watched 50 videos last 2 days, and the fast yet thorough professional editing Chris does just absolutely stands out from the rest. All the pertinent info, all the angles needed are shown, but none of the wasted time BSing and yakking. In this video, the fact he showed sound from bad, then good, then bad, good--WOW, exactly what we all need, who doesn't want the optometrist to do that A, B thing just one more time?? ;) Also, showing the bad bearing without play in hand, up near camera for sound, then ON THE CAR. He just goes the extra mile every time. But presents it all in a tight, fast scripted way. Absolutely subscribed! Thanks!

[@edwardmassie3519]

Great Job! My wife didnt want to work on her Jeep Liberty 2012 because we werent exactly sure what was making noise. I had her watch your vid, and she was all "THATS IT!, THATS MY NOISE!" A trip to O'Reily Auto Parts and $240 later, we replaced the bearing/hub. I broke loose all the really tight bolts and she did the rest. We are both in our mid 50's. Thanks again!

[@Mrmareen19]

Start my morning with a Chris fix video and corn flakes. The more you know !

[@chrisfix]

Elam Marco That is so awesome!!!!!

[@deandoucet3277]

Hey Chris, Thanks for the video brother! I wasn't completely decided that i had a bad bearing in my 05 Malibu but watching your video, clearly showed me that i am 99% right that it is....The sounds and grinding is exactly what i am experiencing. Cheers, and thanks again.

[@user-pf7zs5gu5j]

Chris Fix, I'm sure you've heard it a thousand times but I've watched your videos over a decade now starting out as a 15 year old kid helping my parents fix their cars and you still help me to this day! Thank you

[@andreibaiano]

Awesome video. I’m not a mechanic but it helped me identify the issue with my A4. It was spot on diagnostic of front wheel bearing that I even bought the entire hub before I took to my mechanic. Thanks for all your videos and for showing in a way non-mechanis can understand.

[@blazbohinc5735]

You put so much effort in your videos men.. Keep up the good work. Really. The contend of your is amazing, I learn new stuff, it's really amazing.

[@Tipnotice]

I think this is the most I've ever seen of his face

[@jimhenderson8571]

Exactly!

[@benjaminhilsdon2238]

Honestly, this is like getting the slice of Master Chief's face in Halo 4

[@Zeros_Garage]

ive meet him before, hopefully he doesnt see this lol sorry chris lol but im imagine david patterson (thatdudeinblue) but really skin and facial hair, not a beard just trimmed

[@Ruthless9o7]

I thought that same thing when you could catch a glimpse in his mirror, lmao the mysterious Chris fix

[@wattson451]

@Chiggy D for me it’s more like a skinnier version of Tyler Joseph from Twenty One Pilots

[@High5enWhiteguy]

You’re the man Chris! You are the only guy that’s mentioned that not all bad wheel bearings have play. Thank you!

[@reignswolf815]

As usual, great video. Very thorough... I wasn't absolutely positive it was my wheel bearing on my truck, but I had that exact same roughness when turning my rotor that you showed and I ordered a wheel bearing hub assembly that's coming in next week and now that you showed the exact problem I'm having I'm confident it will fix it! Thanks, I always go to your videos if I have an issue with my vehicles. Great description, examples and thorough explanations!

[@stephaniemadison7264]

Thank you for being so thorough!!! I just watched a video and the guy had his radio playing loudly while trying to show the noise from the bad bearing!

[@johnnie1600]

You have really helped me. I now believe my mechanic wasnt trying to scam me. This video was so damn good. Many thanks!!!!!!

[@jannpalay9333]

Thank you Chris. Now that i am an apprentice and work on cars, i get to appreciate your videos a lot more. This was 7 years ago but its good that it is still here for us to watch. Thanks again. 👍

[@chrisfix]

Glad to help! I try to make my videos timeless

[@CaptainSlowbeard]

Cheers for this video. I don't know much about cars but realised something sounded really wrong when I had my radio off tonight. I'm 99% sure it's the bearing just from the sound after watching this, and I'll do the other checks tomorrow. I've subscribed as it's long overdue I learn how to maintain my car - glad you're still updating your channel, the world needs more people making good, clear, informative content 👍

[@cody42049]

Wow, thank you! I never had anybody to teach me this stuff, so glad you give thorough and to the point information. Definitely a subscriber!

[@Love4raine]

Thank you Chris for all your videos. I have fallen on hard times due to layoffs at work and can't afford to pay mechanics anymore to do all my auto repairs and have been watching your videos and others and have saved myself thousands of dollars by now in doing my own repairs. But now I do have a roaring sound in my right front tire and I can move my tire from side to side and up and down on my 20o9 envoy. But now a mechanic friend came over today for a BBQ and I told him and he looked at it and said my outer tie rod is bad also on that same tire. I drive 144 miles round trip 6 days a week to and from work In the country so no stop and go. Anyway I'm going to watch your other video on checking the rods. Thank you for helping guys like me with your videos. Next problem I have to tackle is it runs roughy when you start it lol.

[@FlemNmzzzz]

Awesome video, this has got to be the best description on how to diagnose bearings, ever.

[@auzzy3681]

Incredibly well articulated and paced out video. Great job Chris

[@marioarias7033]

Excellent and professional video, congratulation Chris.

[@streetmachine8211]

Love your channel Chris! Thanks for all the tips.

[@my2moneypits]

hands down the best video on how to tell a bad wheel bearing.. ive seen dozens of videos and here you've explained it the best!

[@Juli-ge4yp]

You really do a great job explaining things & the examples you use are really helpful. Thank you.

[@jameslyons1661]

Hey Chris, love your videos! Thank you! 53 still learning everyday. Peace..

[@maxgrind438]

I could not hear the unique sound but the physical test is awesome. Thank you so much

[@trombone7]

Dude. This video is A+. You are a natural. Lucid - relaxed - thorough. Keep it up. PS : Firestone couldn't identify source of thumping / wumping. Fast tight right turn (like an exit ramp) noise is super loud.

[@sherjohn2116]

Chris deserves everything he is got, he deserves even more subscribers, 10 Milion soon! .. Greetings from Staten Island.

[@seniorjuanvaldez]

Very nice video of wheel bearing diagnosis!

[@chrisfix]

Thanks Terry

[@snoopstp4189]

Chris, great tips on ways of checking for the bearing problem, sometimes its actually very difficult to tell (by sound - hearing) which side it's coming from, another tip, if you have a good temperature probe, the bad bearing will typically run at least 10-20 degrees hotter than normal so if you compare bearing case temp from side to side you should notice something.

[@danieldunn573]

As other have mentioned your videos, even being as old as they are, still emacuikate. While the quality has improved a ton. The principles used and basics are still the same and always has me coming back to watch!

[@Nytellem]

I love that you did that comparison of the noise. Cause I didn’t know this.

[@ChmbrSE7EN]

Chris, this was a GREAT video. I normally do the work on my cars myself but this one was new to me. I had a suspicion that it was my wheel bearing but it didn't have play so several of the mechanics and friends I spoke with said it must've been something else. However, your video confirms all of the issues I have had. Thanks again.

[@ladymichellesesoadventures8820]

Excellent information. Thank you for being so thorough.

[@chrisfix]

Thanks a lot! Glad you’re learning a lot and enjoying the videos!

[@basharrikabi6409]

Chris ...... you are such a brilliant mechanic ......God Blessed you Brother

[@danpozzobon125]

Awesome Video! very thorough and professional, keep it up Mr. Chris!

[@wildfoundfly420]

Wow great information here, for sure it's my wheel bearing

[@chrisfix]

Glad the video was helpful!

[@zaiks0105]

Differentiating between tie-rod, ball joint AND bearing problem is really nice.

[@MrSanfrinsisco]

It's amazing because I'm in school rn learning about all this but the books and websites they have us using to learn, well they aren't necessarily bad but. I typically look up to see if there's a ChrisFix video on it instead because his videos are WAY more in depth and I understand a lot easier. You truly are the best, thank you!

[@chrisfix]

Awesome! Glad the videos are helpful

[@goldenclovds1760]

Love you man . Very thorough and detailed video . Helped make it easier for when I take the car to the mechanic and tell him what’s wrong instead of me acting like I don’t know and him over charging me for no reason

[@COSMACELF1802]

Awesome video. I've experienced and replaced a few bad bearings in my life and you're right on. Sometimes, the howling noise goes up and down in loudness like a wobble.

[@chrisfix]

Thanks

[@earlmcgee6786]

This is an awesome, and helpful video! I have a 08 Cadillac Escalade & the dealership was telling me that it was the Differential Ring and Pinion that was making that noise...

[@chrisfix]

I’m glad the video was helpful!

[@jimdenke3552]

Good job with the videos. Informative, encompassing, excellent information at a great pace. Thank you.

[@robertdavis3433]

Good video , needed the info. My ABS light was on for years. Will now check. Thanks

[@brunofernandes6518]

Thank you for your detailed explanation. Very good! Cheers

[@chrisfix]

Thanks a lot Bruno!

[@rationalraven8956]

I've been getting that noise in my Nissan Rogue. I thought it was an engine problem at first, but I watched your video and asked a mechanic and now confirmed it's a wheel bearing issue. Should be a cheaper fix than an engine problem!

[@chrisfix]

I'm glad you're were able to figure out the issue!

[@lovelove9108]

Wish many mechanics in NYC or the country are as thorough as him without trying to pull a fast one on customers!!! Thank you Chris! Love the tassel hanging on the rear view mirror on the Mercury SUV!!

[@Mindswirl21]

The world needs your channel

[@GunzzYT]

Thank u sooooo much chris i finally figured out what that noise is 👍

[@chrisfix]

No problem! Glad the video was helpful!

[@GunzzYT]

ChrisFix wasnt expecting a answer haha my first ever response from a big youtuber😆 love ur video's btw

[@KevinNadeau]

Chris, great video as always. With your tips, I was able to diagnose, replace, and make my own video on GMC Envoy wheel bearings.

[@Elitecommando501]

Always a badass job at explaining and showing with simple straightforward words. Good job man thanks. I was clueless

[@kilefagner2152]

One the best car KZbin mechanics out… us diyers appreciate you

[@jamesurtekar1657]

I'm from Jersey, Chris is definitely a Jersey guy.

[@geojor]

thanks for this...

[@theRealEstateSquadron]

Thanks Chris your video saved me thousands,I'm a middle aged ex-motor head that needed a little clarification and my truck is as good as new.

[@imasahm13]

WOW, don't understand all the downvotes! This video finished putting together all I needed to know after watching a prior video on replacing the bearings. Thanks for the thorough video.

[@septemberguido7441]

@ Chris Fix, thanks for the awesome how to videos!! Do i need to do an alignment after replacing the hub and bearing??? thanks for your time!

[@chrisfix]

It depends if your alignment was off before hand and if your wheel bearing was damaged from pot holes. Usually it’s a good idea to get your car aligned if it hasn’t been done in a while.

[@ryankent2134]

Chris. I am new to your Chanel. Have not come across a how to video on how to replace a head gasket. Do you have video on that?

[@eagleeyeswentz2415]

Thanks for putting this up I have an 04 grand Cherokke,and I was told I had a Bad Bearing so I had to Check with you First!Thanks Cris

[@Engineerboy100]

Fricking bad bearing diagnosis clinic! Thanks Chris! Great job as usual.

[@berenisemendez5223]

Now that I know and I'm 100% my front wheel bearing is going bad makes hella noise ama try to fix it myself and buy the parts! plus I could use some experience, tired of going to the mechanic. For beginners like me this was so helpful Thank You Chris!!!

[@redpillproductionscanada5563]

Woah I can see part of your face.... I need to sit down and have a glass of wooder...

[@DanielMendoza-jr8dy]

Thanks man that was exactly what I needed to know. I automatically thought my brakes were bad but it’s clearly my bearings. That’s exactly what my wheel sounds like. I think I’ll still do my front brakes and both bearings since I’ll be in there and my brakes are probably needed. Thanks bro

[@tamyboy1]

Dude, can't thank you sooo much for these videos

[@robertm5969]

For those who have tried the tests in the video, and still aren't positive they have a wheel bearing issue, this is what I'd suggest. This assumes you have the following: - Unusual sound (almost like a low throttle exhaust note) which remains even off-throttle. - It becomes noticeable around 40mph, and gets more noticeable the faster you go. - Trying to shake the wheel from the 3 and 9 o'clock positions doesn't reveal any play in the bearing. - There are no alarm codes on the dash - Can't tell if the wheel is rotating normally or not (especially on RWD cars that have independent rear axles). For these cases, it would be hard to test them by yourself. In that case, the best option would be to buy a mechanic's stethoscope ($5 at harbor freight), place it on the wheel bearing hub, and compare the sound between the different wheel bearings. If one has a metal grinding sound much higher than the others, it's probably time for a new bearing. Thanks for the video Chris!

[@bighapp3213]

That’s exactly what mines sounded like thanks for the tip bro

[@chrisfix]

Glad I could help!

[@carlosd1296]

I really enjoy your videos. Really good content! Keep making these great videos that are so informative and helpful

[@doctorgarbonzo2525]

Thanks Chris for helping your fellow man with this valuable infro

[@rudedogii]

I had that noise so I took my 2010 Tacoma to the Toyota dealer and they said I had a bad transmission mount. They replaced the trans mount under warranty but that did not fix the problem. It was the wheel bearings. Had to fix it myself. Dont trust them dealers!

[@colemanadamson5943]

+rudedogii can you be sure they changed the tranny mount? Pros are hard to find because people don't want to pay for their expertise. DIY'ers only shoot themselves in the foot because when they need a Pro they are scarce. Had they supported the Pro then he'd be there when needed. Think about it.

[@rudedogii]

***** Yes I checked it out. I dont trust them.

[@sjeverett75]

not related to bearings but more about good mechanics. I took my truck in for inspection and mentioned a code that had been thrown and hard 1-2 shift. He said replace or rebuild tranny without looking. He happened to mention what shop he uses for rebuilds. I figured I'd cut the middleman and go there instead. They actually scanned while driving and confirmed my suspicion. Bad TCC valve. They fixed it and works perfectly and for 1/5th the price of rebuild.

[@MemphisMojo15s]

+rudedogii At least they didn't just blame your tires for the noise or the brakes for the scraping. I was under warranty and still had to replace both front bearings. their excuse? no play in the wheels.

[@Azathoth43]

+ThePariss333 Why would you ask how? You can't trust any body. Why are you even here, you can't trust Chris ether. Are you asleep? Dreaming?

[@its_da_kimchi]

Can it be mistaking as a Bent CV axle?? Or possibly cause premature wear on it?

[@reukiz6434]

Thank you, I found out my Mitsubishi Mirage had a wheel bearing issue that needed replacement so I sent it to my mechanic to get it replaced and also found out my brake pump was leaking..total cost of repair $150 The mechanic was surprised by how I knew it was the wheel bearing so i shared this video with him

[@zaheershahzad1332]

Great Job , you won't believe such a video delivers how much knowledge to other people.

[@chrisfix]

Thanks a lot! I'm glad you learned a lot from the video!

[@robynsmith2157]

Thank you, I plan to put my car up on a jack to do the test. my car sounds like an airplane engine! Being able to tell which side is so important to me because I need someone else to fix it and can't afford to get ripped off. thank you for empowering me.

[@fabbyy7253]

When you spin the wheel on the Pontiac, i actually realized my wheel bearing must be bad if this is how a bad wheel bearing sounds like. Mine is like...101 the same. Think I'll have to take care of this soon. I know its not the tires cause i switched from summer to winter tires some 3 weeks ago. Noise still keeps bugging me but know i feel like i know for sure.

[@SuperRPfan]

I fix everything I can (57) and must admit your format and delivery is both informative thorough and pleasant to listen to why I’m not subscribed is be-on me

[@njughongbryan]

Great comparison. This video was very helpful.

[@MarzNet256]

Hey Chris. Another great how to video. I would add that you should have also spun the wheel on other side to hear the good bearing for comparison.

[@robertgalante4706]

Great video,safety tips also

[@juliogonzo2718]

If it sounds like a train with its brakes on and there is shiny bits in your wheel, it's really bad

[@LaPulgaM]

This is exactly what my car sounds like right now. Going to try and buy the parts to do this fix myself, I was told front ones are bad but will probably also do the back ones.

[@camaronkoury6882]

How hard was it to dk yourself? Debating on taking to mechanic or doing it myself

[@MrJamboy300]

this was the most thorough explanation on wheel bearing

[@jacobreyes3976]

Huge help! Thanks for the in-depth explanation!

[@chrisfix]

No problem!

[@PeterC408]

Thanks Chris!

[@chrisfix]

No problem

[@dancurrier6421]

hello my brand new wheel bearing hub I just put on sounds like it is humming pretty bad I'm upset I just bought a pair of them from A1 auto parts have not replaced right side front yet

[@spamh3591]

Hey @ChrisFix is a bad wheel bearing also when you’re rolling at low speeds and it’s a grinding spinning noise

[@dentondunn4346]

That's what mine is doing. A growling noise under 35mph. When I turn to the right it quits though. Could it be a cvjoint cause it's 4wd. Or could it be a bearing in the front differential where cvjoint goes in

[@jakebuttry6242]

@@dentondunn4346 mine is the exact same. Did you fix yours and if so what did it take

[@mitchelltaff7255]

v helpful thank you. Seen lots of people talk about bearings but I’ve never actually seen one or heard what a bad one really sounds like

[@jonhinman2471]

excellent tips! Another great way is to spin the wheel while also holding the suspension spring. A bad wheel bearing will resonate through and you will be able to feel it.

[@PapiDoesIt]

Another way to tell is if your car says "Chevrolet Cobalt" on it anywhere. That's a telltale sign your wheel bearing is going bad. Seriously, went through 3 in 100K miles. Otherwise, under rated car that is really pretty good.

[@chrisfix]

Papi Johnson Hahaha, dang that stinks!

[@Bobjua]

I just got a cobalt today and this is the first video I watched.

[@TheAgentAssassin]

GM/CHEVY for sure

[@marka8486]

All american made cars are shit. I have owned Toyotas most of my life and have NEVER had a wheel bearing problem. My wife wants a Cadillac, so I buy her one but let her know the transmission won’t last. 40,000 total miles and the wheel bearings have taken a crap. Come to find out, they only warranty them for 12 months. You KNOW they are purposefully installing cheap shit when they only warranty such an important part for 12 months. The replacement bearings ? Warranties for LIFE ! American cars suck horribly.

[@ladymichellesesoadventures8820]

I have a 2007 manual. I00+K miles never had a mechanical issue short of when someone rear-ended it. Been a solid car.

[@raiderman80494]

Hey ChrisFix, I have an 01 chevy impala and whenever I'm driving it, it'll make a roaring noise. What is making that noise when I drive?

[@motorbreath-4172]

Bad girdle spring

[@stopglobalswarming]

The trunk monkey is hungry

[@jovanies9751]

Love you man. Thanks for the great videos.! No homo. Easy to follow videos and straight to the point

[@notnice4038]

Thank you bro loved the way demonstrated the problem 🙌🏽

[@HectorCocinaCruz]

Finally I thought my engine was going to blow up but it was this loool

[@apparentlyashleys1fan113]

Lol spooky car noises

[@wmichaels362]

Good information. Thanks. A way to identify which front bearing (maybe even rear?) is making noise, is to make turns to the left and right. If the left front bearing is the problem, the noise will be present when loading that bearing (turning left) and will disappear/lessen when un-loading the left bearing (turning right).

[@MarzNet256]

WMichael S Actually, it's the opposite. So, if you turn right you will increase load on left front.

[@wmichaels362]

Ooops! Sorry, brain fart. Thanks for catching that!

[@isaaca1036]

what about rear bearings? does the turning method affect checking those? i got a very slight sound coming from the rear after getting new tires. the shop drove around and said it might be the bearing but list a bunch of possible replacements such as brakes and rotors, break shoes, parking brake kit, backing plates, bearing, etc. they said it might be the bearing verbally however i spoke to another experienced mechanic and he said it might just be the brakes and rotors since bearings on my SUV are supposed to last a long time

[@rauldiaz4001]

IndividuallyWrapped y

[@AdnanKhan-ky3jp]

Good point but please confirm, I am getting noise while driving straight but when I turn right the noise disappear. This noise started coming after I had to hammer out the jammed all four winter tires to put on all season tires. Will appreciate your comments, thanks.

[@backho12]

Very professional presentation! Thank you!

[@gee6924]

You’re a Legend chris