Canon AF35M "Sure Shot", "Autoboy": How to use - Video manual

[@Macjohn1419]

It was a very nice, simple camera to use and it took excellent photos. The flash covered the entire frame with no central hotspot. It was only $125.00 back in 1981. Quality pictures for a reasonable price.

[@m.b5777]

$125 in 1981 = $430 today according to the official inflation calculator.

[@bananaketchup02]

i got the same one for the same price a few days ago! :D

[@ImTanzla]

I just found mine for $16 at an antiques store! Hopefully I can get it up and running

[@dipeshdey1157]

In India how can I get it?

[@gordon7566]

Thank you so much! This is such a helpful guide for a amateur like me!

[@constellation51]

Found this camera at an estate sell and bought it for 10 bucks. I'm so excited to use it! This video was so informative

[@Lykiri]

My Grandpa had this and it's been in my posession for years, and I finally got thinking about using it. Thanks to this vid I'll soon be able to take some pictures

[@FilmCameras]

Great! Have fun taking photos!

[@burgbuilds]

I found my grandads old camera collection featuring this bad boy, I'm so pumped to use it! also this music is so fun.

[@wOOdywOOdsn]

The really best "How to use" i've ever seen!!!!

[@FilmCameras]

Thanks!

[@CassyAthena]

this video was SO helpful and clear to understand. THANK YOU

[@FilmCameras]

Thanks!

[@Milo-hk7ei]

Thank you. What a great explanation!

[@maryannes6426]

I just got this camera in nearly perfect condition!

[@jasusstories]

Thank you, this was super clear & simple and covered everything!

[@faerin0233]

Hi! So what is the difference between self timer(press once after lever is down - shutter goes off after 10 sec) and pre-focus(press once to focus and then again after lever is down)? Is there a click sound or an indicator that reveals on which mode I'm on?

[@FilmCameras]

No, there is no other indicator. It is almost the same. The difference is that by the time you press the shutter button for the 1st time, you have 10 seconds to pre-focus, otherwise it will fire as a self timer.

[@godlikee187]

@@FilmCameras ohhhhhh

[@jacovanlith5082]

The best camera (for point and shoot) next to the Hasselblad 500 C/M Agfa 135-36 APX 400 or Kodak Tri-X in Rodinal developer. Fujicolour 1600 ASA >> 400 ASA= two stops overeposure= No problem. Fuji / Kodak 400 0r 800 ASA Top review !

[@denfilm6005]

It feels like this camera was released yesterday.

[@ShonMogharabi]

this was super helpful! can you please do the AF35ML!

[@megansalt]

that's a cute pre focus button

[@dannyschoning6941]

Great Video! Thank you!

[@julesstagno5702]

an excellent and complete usefull video

[@Liberty502]

Great video thanks! 🙏

[@alizeedebollardiere4035]

Hello, I just bought this camera on eBay but as a surprise the back is not closing at all and it's like the camera is dead, none of the functions seem to respond. I've changed the batteries and tried different ones but nothing happened. The thing is that the camera appears to be almost new so may be I've missed something, I don't know. Can you help me or do you have any advice please ? Thanks for the video by the way, very helpful !

[@Hazzar595]

Did you have any luck with it?

[@Riceordie]

Thank you sooooo much. I just got mine today. U earned a sub!

[@FilmCameras]

Thanks!

[@Plazaspaola]

Love it. Where can I buy this camera?

[@josiah.forestieri]

Hi there, I just purchased this camera and was getting to know it as i unfortunatley canceled the self time after pressing the shutter release button. The camera now is stuck with the red light on and the motor whirring constantly. Any idea how to fx this issue? Thanks!

[@vedrand965]

I have a same problem, any help? Thanks!

[@TWOfudgies]

Did you ever resolve this?

[@derrickwho]

Is there a specific kind fo 35mm film that works best with this camera? Or do you have any recommendations of good 35mm films?

[@FilmCameras]

You can use any 35mm film you want, but the ISO setting on this camera goes up to 400, so better not use anything above that, since you don't have control over speed or aperture. I would suggest the Ilford HP5 Plus or Kodak T-Max 400 black and white films which are cheap and easy to find. Regarding colour films, it depends on the colour tones and the aesthetic you want (and the price). Kodak Portra 400 is brilliant but expensive. Kodak ColorPlus 200 and Fujicolor C200 are very good and more affordable options. There's so much more and you can find reviews with samples online and on KZbin that can help you choose.

[@Ramenbowl25]

Wawww thank you for the detail and easy to understand video awesome

[@rollingardner]

Incredible! Thanks!

[@aminearfaoui3380]

Very nice video , thanks

[@allegramess]

Does the final image shoot only what’s inside the yellow frame or all of what’s seen through the viewfinder? 👀

[@FilmCameras]

You should always use the yellow frame as the safe area of your image.

[@anttttt2004]

I have this camera but the film door won’t shut, will it still take photos the same if the film door isn’t completely shut?

[@FilmCameras]

If the back door can't close, light will come in and ruin your film. But after loading the film, you can try using a dark black tape to keep the door light-tight shut. Better tape it all around the edges to make sure no light comes in. And when you are over taking photos you can remove the tape and open the back.

[@yichiaaaa]

This is very useful! thank you so much. I purchased the same model recently and my shutter is stuck, what can I do about it? :(

[@FilmCameras]

If the shutter is stuck you better take it to a camera repair shop.

[@athalla2530]

you make the video so simple which easy to understand, love it. and make the manual video of yashica MG-1 pleasee....

[@upload2see]

Thank you very much for your help. 👍🏻

[@alexandercahue3656]

I just finished a roll of film but the film transport indicator wouldn’t move when rewinding. This hasn’t happened before. Is there a reason for this?

[@jCHAN510]

Hello, I’ve recently switched the film of my camera and as I was taking pictures I noticed my film transport indicator was not moving. Any advice? Also, will the photos still be okay? Thanks for the great tutorial!

[@FilmCameras]

It is a common problem to have a broken film transport idicator. So if the camera has no other issues, then normally, your film will be ok.

[@jacekkedzierski9459]

yesterday I had same issue, just cleaned/scratched points of touching batteries esspecialy inside of camera

[@Jmv2.0]

Hello, the back door of mines won’t stay shut. Is there any way in which I could fix this ?

[@FilmCameras]

If it won't close then something must be broken. But if you use a black tape across the gap to hold it shut and to avoid light from entering inside, you will be fine.

[@Jmv2.0]

@@FilmCameras thank you! That’s what I ended up using. Hopefully after I shoot one roll and develop it I’ll see if the tape truly works.

[@yckieh568]

I just got this camera today and I started testing it. It works well but sometimes it no matter how much I press the shutter it just won’t fire. Wondering if it’s a focusing issue? The fix is usually to just let it take a break and try again wondering if it’s normal?

[@FilmCameras]

I don't know what could cause this problem. Normally you should press it first halfway in order to focus. Maybe sometimes if you directly press it all the way down after consecutive takes, it won't work properly.

[@ishiaryan]

Thanks for the video! I'm hoping you can help me. I bought one of these recently and I fear that the auto focus is broken. When I half-press, I don't hear a sound at all to suggest that the lens is focusing. Considering how loud the camera is, I assume that the auto focus would be audible. When I take the photo, I see the little distance indicator in the viewfinder move. And it seems to be accurate to what I'm shooting. But, I don't know if the auto focus is actually doing anything. Is there auto focus audible on this camera? Should I be concerned? Thanks!

[@FilmCameras]

Hi! The focus won't make a noise (like in dslr cameras for example). It actually focuses the lens while taking the photo and making all that noise. Hopefully you won't have any problems with your photos!

[@ishiaryan]

@@FilmCameras That's the best possible answer that I could hope for! I'll respond here with sample photos when I get this roll developed. Thanks again!

[@zachfilmore2358]

Thank you very much 🤝

[@julieesteban2759]

Hi! I just bought the same model! I was so excited to use it but right now i'm having problems. It was working fine when I was testing it without a film but ended having the film rewinder stuck and I can no longer press the shutter button. Will you please give any advice what I can do to fix this?

[@FilmCameras]

Try opening the back door and press the rewind button on the bottom while pushing the rewind switch. Also try using new batteries.

[@anjeliadibben6106]

my film transport indicator isn't moving! and my shots aren't being counted either, neither will move. However everything else works just fine on this camera. Can I still use it or is it broken?

[@FilmCameras]

Are you trying with film inside? If not, then the indicator won't move. If you have film and neither move, then either the indicators are broken but the film advances fine, or the film has not been properly attached to the take-up spool and it won't advance at all.

[@fondnessknocks]

Hi i'm late to this party... but what happens if I set the self timer, press shutter button and then cancel self timer ? :( I was at 1 exposures and then the film went back to 0 or something not really sure where to go from here...

[@FilmCameras]

Hi. Cancelling the self timer after pressing the shutter release button will confuse the camera. Keep taking photos and you will see the result when you develop the film. Probably that photo is ruined, but the rest will be ok.

[@elizabethjuarez4563]

Super great video

[@curly9538]

hello!!! lovely video!!! just bought this camera, and after putting batteries in, it began to smoke. now the lenses are all foggy. i used duracell double a batteries. any suggestions?

[@FilmCameras]

I don't know what caused this. Did the batteries started to smoke? Maybe you should try using regular alkaline batteries and not extra strong ones, because this is an old camera. Or there might be something wrong with the camera electronics causing this. You better ask the person you bought it from, or take it to a camera repair shop if the problem continues.

[@thunderwood]

Very helpful!

[@ahnruma]

Hi, so, I've reached the 36th movie and I left it for 30 minutes. It’s all hot/warm. when I wanted to rewind the movie, it couldn't be done and that time I opened the battery and put it back, but the movie pointer returned to S but the movie has not folded. what should I do?

[@mergaux__818]

after loading the film and clicking the shutter button til i reach the in between of 0 and 2, the shutter button seems to be stuck now and wont click for me to start taking photos :( what do i dooo

[@yoursweetsarahnade]

How will you know if the camera is in prefocus vs self timer if you press the buttons the same

[@FilmCameras]

It is the same button. To pre-focus you need to press the shutter release button a 2nd time. But if you don't press it a 2nd time and you wait for 10 seconds it will function as a self timer. That means that by the time you press the shutter button for the 1st time, you have 10 seconds to pre-focus.

[@lolawillows]

This is so helpful, thank you so much! do you by chance have a link to where i can buy the exact film?

[@FilmCameras]

Hi! 35mm film (color or B&W) is the most common and you can find many types in local photography shops or online if you don't have a shop near you. But if you are talking specifically about the film I use in this video, it is a Fujifilm Superia 100. It is no longer produced, so there is no way to buy it now (unless you find expired rolls). I just use it in the video for demonstration purposes.

[@0222am-cje]

Only video I would go for as a film beginner! I just wonder how do i need to set ISO by turning ASA ring on the lens? Less ISO for closer shot or something?

[@FilmCameras]

The ISO is the film sensitivity to light. Large numbers mean brighter image. But in contrast to the digital cameras, in film cameras the ISO depends on the film roll you choose to put in your camera. For example, in this video I used 100 ISO film (1:08) so I set the ISO indicator on the Lens to 100 (1:50). This camera is automatic, so you need to set the ISO of the film to "tell" the camera how to calculate the exposure. If you set the ISO indicator to different value than the one on the film you are using, the photos will be wrongly exposed.

[@0222am-cje]

@@FilmCameras Thank you so much!

[@lylouze]

Thank you for this video, I watch it every time its time for a new roll :-) That said, I was wondering if you could give me some advice. I just finished my roll and didn’t notice, and forgot to rewind the film! It seems I can no longer rewind it and the camera is all hot, could changing the batteries help? Thank you!

[@FilmCameras]

Hi! Yes, changing batteries after the camera cools down, might help. Try using simple AA batteries and not the extra strong or lithium ones, as their power might not be suitable for such an old camera.

[@lylouze]

@@FilmCameras amazing, it worked. thank you for the reply !

[@ahnruma]

I've reached the 36th movie and I left it for 30 minutes. when I wanted to rewind the movie, it couldn't be done and that time I opened the battery and put it back, but the movie pointer returned to S but the movie has not folded. what should I do?

[@julianijones]

how do i get the pics i took i am so lost

[@RobloxRandomMadness]

The film door latch on my AF35M wont close. Is this a common problem with this camera?

[@FilmCameras]

Not sure, but you can still use the camera if you seal the back door with dark tape to avoid light leaks.

[@vapor4]

Yes, it's very common! You can tape it or better to buy a replacement door

[@julianramirez5087]

I am having an issue where my subjects are almost always out of focus where as the landscape is in perfect focus. Can you help me out with this ?

[@FilmCameras]

This autofocus is not as accurate and fast as in modern cameras. Make sure you perform all the actions as described in this video. The camera focuses only in the middle of your frame (the square in the viewfinder). Next be aware that this lens can't focus for subjects that are very close to the camera. Position your subjects a bit further. Finally, since it is an old camera, it is possible that the focus system is not working perfectly any more.

[@StarStrUck2205]

Hi! I have this camera when I first load it everything is fine as soon as I take a few pictures suddenly it doesn’t let me push the button anymore, I don’t know how to fix that and it has BRAND new film 😭

[@FilmCameras]

I don't know what causes this problem. Try changing batteries when this happens or check if you have taken as many shots as the film you have loaded is supposed to take.

[@StarStrUck2205]

@@FilmCameras changed the batteries n its working again! THANK YOU

[@dustinthewind8209]

Just found one at goodwill for $20. The flash and winding system seem to be working. I just need go get some film

[@anniehow7045]

Hi! I have this camera and face issues trying to rewind the film. The number counter doesn't seem to be moving/count backwards. Any idea what's wrong with this? Could it be that I've not placed the film roll correctly? Thanks for the great video!

[@FilmCameras]

If the film counter moved when taking photos, there might be a counter problem when rewinding. Is the transport indicator ( 5:23 ) moving? If yes, the film should probably roll back ok. Keep rolling until the indicator stops moving. If not, there is a chance that the film snapped or was blocked at the end. In this case, after trying rewinding, open the camera, in total darkness, and feel with your hands if the film is still laid out or if it has rolled back in.

[@ahnruma]

hi. I've reached the 36th movie and I left it for 30 minutes. when I wanted to rewind the movie, it couldn't be done and that time I opened the battery and put it back, but the movie pointer returned to S but the movie has not folded. what should I do?

[@ahnruma]

i just bought this camera, at first everything was fine when i tried it without a Film. when i put the battery in and pressed the shutter button there was a sound. after that i just put it down and a few minutes later i clicked the shutter button again and it was still pressed and there was a sound. but suddenly the shutter button is just stuck and can't be pressed, when i try to load the Film. it's so hard to be pushed, it really can't be pushed. i have put the button on the bottom of the camera but nothing happens. what's wrong with my shutter button? please can you help me 😭

[@FilmCameras]

First of all, try using new batteries. If the issue continues there might be a problem with the rewind button at the bottom. In total and complete darkness, open the back of the camera and then close it again. This might reset the button to its position. Make sure the button at the bottom stays out at all times except when you want to rewind the film.

[@margot5905]

exellent video!!

[@jtlk3568]

So i just got the camera and pressed the shutter release button a few times with batteries but without film. Is there anyway to rewind it back to the S?

[@FilmCameras]

Once you open the back, it should normally return back to "S"

[@jtlk3568]

@@FilmCameras should the red and white thing shake when taking photos without film?

[@FilmCameras]

It will shake only when film is loaded, because it is attached to the film transport sprocket.

[@sydmoore6]

Hi! Question - my lens on my camera doesn’t expose the ASA part of the lens where you change the ISO, and I can’t figure out how to remove that covering? Any thoughts?

[@FilmCameras]

Hi. If you don't see the ISO setting on the face of the lens as in this video, you probably have the 2nd version of this camera, the Canon AF35M II. In that one, the ISO setting is on the side, top, of the lens (as you look down the camera) and you change it with a switch also located on the side, but at the bottom.

[@sydmoore6]

@@FilmCameras thanks for the response! I actually just figured out it had a UV filter over the lens that was stuck😬 but I got it off and could change the ISO

[@samanthageraldine7546]

question: how do you know if the camera is on? i've got this old camera from my grandfather and i suspect that it's not working anymore even with the batteries in. does the shutter go off even without film inside?

[@FilmCameras]

Unfortunately the camera doesn't have a "on-off" switch so once you have batteries in, it should fire even without film inside. If it doesn't then something is broken. Check if the batteries contacts are corroded from battery liquids. Maybe this will solve the problem.

[@roachie1602]

Hey! Me again. My shutter button is not working. When I first got it and there was no film, I pressed it and it worked. However now with batteries and a film cartridge good to go, it's not working. Any tips?

[@FilmCameras]

First make sure that you have new batteries and that they are correctly inserted into the battery slot. With the same batteries check if the camera works without a film and if it does, then load a film and try again. Also check if the rewind button-pin on the bottom of the camera is pushed in by mistake.

[@juxbuxmadafaka]

Hi, thanks for this video. I just shoot the first roll of film and it is great. I have just one question: I saw a photo of Autoboy with more lenses that you can attach to it. Like telephoto, etc. Where I can buy those? I can't find those anywhere on the web? Thank you:)

[@FilmCameras]

Hi. These might be very difficult to find. Maybe you can try ebay or similar websites or film photography groups on facebook etc

[@juxbuxmadafaka]

@@FilmCameras Thank you for response. Yes I tried but no luck. Maybe one day I'll find them

[@beeeri8979]

Link to where you get your film? :(

[@FilmCameras]

35mm film is the most common type. I usually buy it from local photography shops. But there are many on line shops too that you can try depending on where you live.

[@trinhdong7871]

Hello, I did everything like yours but the film turned out blank, do you know why? Please!!!

[@FilmCameras]

Blank film could result from various reasons. First of all are you certain that the film was proprerly caught in the sprockets? When advancing did you check if the film advance indicator was moving? Maybe the film never advanced in the first place. You can also check if there is a problem with the shutter. To do this open the back of the camera (without film inside), point the camera towards a light source and look through the back of the lens if you see the shutter opening and closing. Finally make sure you haven't loaded the film cassete up side down. The emulsion side of the film must face the lens.

[@alizeedebollardiere4035]

Hello, I just bought this camera on eBay but as a surprise the back is not closing at all and it's like the camera is dead, none of the functions seem to respond. I've changed the batteries and tried different ones but nothing happened. The thing is that the camera appears to be almost new so maybe I've missed something, I don't know. Can you help me or do you have any advice please ? Thanks for the video by the way, very helpful !

[@FilmCameras]

If you are certain that the batteries are new and that you had them inserted the correct way, then you should contact the seller, because with the batteries the camera should work, even without film inside. Regarding the back it is common to tape it around with black tape to avoid opening and light leaks.

[@alizeedebollardiere4035]

Thanks !

[@Louloutroosters]

Hello, I just bought this camera but when I put the batteries inside, the camera makes noise and rewinds the film without stopping... Do you know why?

[@FilmCameras]

Hi. Probably the two rewind switches are on. Check at 5:08 of this video. There is the bottom button and the switch on the top. I guess the button on the bottom is pushed in, in your camera. In order to rewind the film, it also means that the rewind switch on the top is pulled. Normally, this switch has a spring and you need to hold it with your finger so as to rewind (like in the video). In your case it might be stuck, so you have to push it to the right (against the arrows). After doing this, press the shutter release button (the one you take photos with), to unlock the bottom rewind button. For all this you'll need to have batteries in the camera. No need to have film inside.

[@Louloutroosters]

@@FilmCameras Thank u for your response ! I did what you said but it didn't work... The shutter release button seems to be stuck and the film transport indicator is not moving at all://

[@FilmCameras]

There should be a problem with these 3 buttons. Better take it to a repair shop or the place where you bought it and ask for help.

[@alician3010]

why some other people doesn't put the film end in the slot? will that be okay?

[@lilyn141]

How do i adjust the film speed, I can't twist the dial

[@FilmCameras]

The film speed ring is often very stiff in this model. Mine is too and for this reason I use both hands. You can try gently pushing it in while twisting. You can also try a very tiny drop of lubricant oil and see if it helps. Most film rolls today are 200 or 400 ASA, so if you manage to reach one of those two, just leave it there.

[@kamillemurillo6031]

Helpful video! What if I still have few shots left from my roll but I want to use it at later time, is there a button to power off or should I just leave it? I'm afraid it will drain my battery if I leave it for at least 24 hours.

[@FilmCameras]

There is no power off button unfortunately, but to drain the batteries it will take days. You can remove the batteries though and put them back again to continue shooting from where you left it.

[@kamillemurillo6031]

I see. Thank you so much for the quick reply!!!

[@arsyrahmatsyahbani7610]

Hi! one more question, when i press my af35ML shutter release button half way thare is a long beep sound, what does it signify?

[@FilmCameras]

It probably means that the camera can't focus, because it is dark, or because the subject is very close.

[@1stclassmisana]

Recently bought mine tried shooting a few it was okay but my flash won’t work or it’s not working when I bought it and the counter went back to S and I can’t take a photo. Tried pressing twice the same thing you do when you load the film and I could take it photos again. Would it affect the photos?

[@FilmCameras]

If the film automatically rewinds when the counter goes to S, there will be a problem with multiple exposures on the film. But if it advances properly forward, even when the counter goes to S, you'll probably be fine. Usually the counter goes to S when the back door opens. So make also sure that it remains fully shut.

[@1stclassmisana]

@@FilmCameras The counter goes forward when I take photos but when I’m not using the camera it goes back to S. And thank you for responding!

[@michthebich]

hi! ive been having issues with my canon af35m lately and was wondering what the red light under the shutter button means. Every time i put new batteries in, it goes red.

[@FilmCameras]

The red light goes on every time you take a photo. If it constantly stays on, then this is not normal. But apart from this, if the camera works properly, just ignore it.

[@zoezakson]

Question abt the self timer! I’ve been trying to use it as instructed (moving the level and then pressing shutter down to start 10 sec timer) but everytime I do press the shutter it just takes the photo right then and there with no timer delay… I’ve wasted abt half of my roll trying to figure out wth is wrong with it but I’m stuck lmao

[@FilmCameras]

The self-timer works as in the video: first you move the lever and then you press once the shutter release button. If after about 10 seconds the self-timer lever doesn't return back to position, or if the photo is taken when you press the shutter release button, then the self-timer must be broken and might need repair. Try testing it without film inside in order not to waste films. See if the pre-focus feature works as well (it uses the same lever, see 3:42 in this video). Note that self-timer and pre-focus differ only in the fact that in pre-focus you press the shutter release button a 2nd time within the 10 seconds time frame limit.

[@zoezakson]

@@FilmCameras thank u!!! i tried all you said and still no luck so i took it to my local film lab and they agreed its likely just broken from old age and usage. Oh well but was worth a shot to ask. not a huge bother cuz the rest of the camera works fine :)

[@selina3532]

you can't adjust shutter speed on this camera, right? I'm just learning about sunny 16 and not sure how to apply it to my shooting practice when i can't seem to adjust shutter speed

[@FilmCameras]

No you can't. This camera is automatic.

[@noervitasariundziramaharan8720]

Hi, i wanna ask you. Since my rewind button is broken, can i rewind the film manually? And how to do it?

[@FilmCameras]

You could try removing by hand the film in **total darkness** by pulling it out, but there is a big chance that it will be stuck and will snap and will end up ruined. So better take it to a repair shop to be sure.

[@arsyrahmatsyahbani7610]

Hi, i wanna ask you. is AF35ML has a 3 zone focusing feature and has a pre-focus feature too?

[@FilmCameras]

Yes, the AF35ML has the Canon Triangulation auto focus system and the pre-focus feature by pressing the shutter release button half way.

[@arsyrahmatsyahbani7610]

@@FilmCameras thank you!

[@emily-bp5bt]

What should i do if the flash doesn’t fire? The color doesn’t turn on and I don’t think it works anymore, is that okay?

[@FilmCameras]

If the flash is broken, you can still take photos but not under dark conditions.

[@alicebubest]

I have this but not sure if thr camera even works. Should I still load a roll of film in 😩

[@FilmCameras]

You can still try it without film. Just make sure you have new batteries loaded and if everything works like in this video, you can load film and take photos.

[@jolollorente7676]

Is it okay to remove the battery when not using the camera?

[@FilmCameras]

Yes, especially if you don't use the camera for a very long time you should remove the batteries to avoid corrosion and battery leak.

[@lightningmcqueen25]

What's a reasonable price point for this camera? I'm looking to buy one, but I'm a bit overwhelmed by the variants!

[@FilmCameras]

Indeed there seems to be difficult to find a specific price for this camera, especially in sites like ebay. It could be reasonable to give around 60$ but in flea markets you can find it much cheaper.

[@Riceordie]

Does this camera only have 24 exposures though? I had my portra 400 with 36 exposures in but it stopped at 24? Did I load it in bad or is it just the limit of the cam?

[@FilmCameras]

The counter goes up to 36 so it should take 36 photos normally

[@Riceordie]

@@FilmCameras Ahh okay, Thanks for clarifying. Guess mine got stuck on 24. I think it's the battery. Sad it was a portrait 400

[@Riceordie]

I'm still subscribed here. Thanks again for the video and quick replies. This really is my go to place for cams. Cheers

[@justduck2030]

Hey I just got camera off eBay and everytime I take a picture the zone focus scale lands on landscape (the last option) and idk it I’m doing something wrong or if the Camera is defective. I tried shooting super up close and getting portrait shot yet it still marks it as landscape. Is this something that can be overlooked, fixed, or do I have to return it. Please help!!

[@justduck2030]

GREAT VID BY THE WAY, Super helpful:)

[@FilmCameras]

Hi! I've never heard of this problem. There could be a small chance that the focus scale in the view finder is broken and that the lens is working properly, but you need to test with film. But most probably there is something wrong with the focus in general. Ask the seller or take the camera to a repair shop to give you an opinion. It might be something easy and cheap to fix, but if there is a serious problem, you should return it and ask for a refund.

[@RazorFrank]

I have this exact same problem! Let me know if u found an answer :)

[@julianramirez5087]

@@RazorFrank I have this problem as well, makes most of my subjects in the images look blurry but the landscape is clear as day

[@heeyitzjaz]

hello! what if i want to use the 800 lomography film? the highest i can set the ASA is to 400

[@FilmCameras]

Hi. Unfortunately the ASA setting on this camera goes only up to 400. So if you use a 800 ASA film, your images will not be correctly exposed. Since this is an automatic camera you can't do much. What you can do is "pull" the film during development for about -1 stop. But I'm not sure if it is going to have nice results in color film. But your 800 ASA film might give you nice results in dark or night situations, but make sure not to use the flash.

[@anacute102]

Can you do "how to use canon autoboy 2" cause i dont know which one i want to buy..

[@FilmCameras]

Don't have that one. But the 2 is almost identical but slightly improved in some features, like the ISO dial for example. They also have slightly different lens but not a big deal. Overall they both have the same functions. The 2 has some small improvements but the 1 has more "historical" value. Apart from that it depends on the condition and the price you'll find them.

[@milankrstevski6651]

Exellent!!!

[@jaredkim3036]

To open the lens to do you need to have film inside the camera?

[@FilmCameras]

No you don't. You can try all the camera's functions without having a film inside.

[@tamerbilal2399]

thank u

[@sltrwyn]

I still have this camera in good condition but I don't know where to get the film 😭

[@FilmCameras]

This camera takes the standard 35mm film. You can easily find it in many photography stores and online.

[@sltrwyn]

@@FilmCameras We don't develop films in my place anymore. 😭

[@FilmCameras]

Still, you can find online stores that can develop your film and print the photos, once you send it to them. Usually the same online stores sell many types of film.

[@alician3010]

my viewfinder of this cam is a bit blueish does that affect my image?

[@FilmCameras]

No, the viewfinder will not affect the image. It is separate from the lens.

[@alician3010]

@@FilmCameras thank you☺️

[@maryannes6426]

Is there an on and off switch?

[@FilmCameras]

No. For this reason you should be careful not to press the shutter release button by mistake.

[@iona9637]

is this a analogue camera?

[@FilmCameras]

Yes, 35mm film

[@noervitasariundziramaharan8720]

Is prefocus and self timer in the same side?

[@FilmCameras]

Yes, it is exactly the same. The difference of the function depends on if you press the shutter release button a 2nd time (pre-focus) or just once and leave it for 10 seconds (self timer).

[@noervitasariundziramaharan8720]

@@FilmCameras okay, thanks for the information😉

[@chriszk5754]

my canon AF35ML doesnt have this slot where i can insert the film into

[@FilmCameras]

Yes, the Canon AF35ML has a different system. You just pull the tip of the film across, past the orange marker and when you make sure the perforations of the film fit the sprockets, close the back and when you activate the camera it will automatically take up the film.

[@chriszk5754]

@@FilmCameras thx i figured it out :)

[@nurulazuwin4289]

how to import the pictures from the camera to my phone?

[@FilmCameras]

This is not a digital camera, so you can't do that. But once you get the film developed, you can scan it with a film scanner and have the photos in digital format.

[@morganmakana2556]

I just got this camera at a thrift store for $5. I put batteries and film in it. The film winds but the shutter never changes from 'S' and will not let me take a photo. I click and nothing happens. Does anyone have any advice? thank you in advance!!

[@FilmCameras]

Not sure. But you can have a look at the following: 1. Check the rewind button-pin on the bottom (5:08) maybe it is stuck in pressed-in position. 2. Check if the self timer lever has stuck in horizontal position (4:25) 3.If it won't let you take a photo and the film is wound up, then maybe the film was taken up in a wrong way. Try removing the film and test the camera without a film. Normally it should work properly. If none of these work, then you should probably take it for repair.

[@marianaalzate3132]

The same thing happens to mine. I think it's not the film that winds, it's the rewind button wich is stuck. I've already tried to force it with some tweezers (maybe not the best idea haha) but it didn't work so you could try the same or take the camera to a repair shop. Since it's not an electric problem it should be cheap i think and not that hard to fix. Hope you or someone can fix it, is a very nice camera. Xo

[@Umstead2011]

I have a corrosion problem 😕

[@alyson8650]

My film won’t rewind and I’m not sure what to do 😩

[@FilmCameras]

Make sure you follow the steps you see in 5:01​ of this video. If this doesn't work, change the batteries with new ones and try again. If nothing happens then there might be a problem with the rewind mechanism. What you can do is open the camera back *in total darkness* (!) and try pulling it out gently. Do not force it if it won't come out because it may snap. If you can't do anything, take it to a photography shop and ask for help removing it. If the proceedure is done in complete darkness you won't loose your photos.

[@roachie1602]

Do you have a link to the film you used in this video, please?

[@FilmCameras]

It is the Fujicolor Superia 100 ISO (24 takes). But I think it that is no longer produced.

[@jacovanlith5082]

Forget the QUEST for the best film and the finest grain. Marketing makes you crazy. It is like petrol for your car; forget the brand Put any film in your camera and shoot. The 400 ASA B&W films of Vietnam in 1965 gave 2 x 3 meter prints.

[@AlexS-hg9jg]

Yo tengo una y la vendo

[@dipeshdey1157]

How can I get it in India