Fortunately the most comprehensive video I have seen on this camera so far. So many people offer bits and pieces and maybe suggestions but clearly this guy has his house in order. Very impressive. I have been wondering for over a year how people work with the woefully inadequate built in monitor from Canon in outside settings. So now I see how some people handle that. Sad Canon won't address the fact this screen is so bad outside in medium sunlight. Very poor for Canon to leave us stranded with such a poor screen. Yes I do agree with the issue of missing an SDI output being a critical error on Canon's part. Maybe it was really intentional since they want you to buy their C300 or C500. I would say putting an HDMI to SDi would certainly provide a proper signal but likely with a significant delay/lag/latency. I'd love if they would offer a mod to solve this problem. Not sure I would add the matte box and I would use a rode mic instead of Deity but for sure the one battery solution is genius. This one video has solved so many issues I have had with the camera in outdoor settings. This is truly a complete solution that doesn't turn a nice small camera into a behemoth. Some people rig it out so much they end up needing a rig to just hold up the rig!
@SuperNova-Steve2 жыл бұрын
Nice vid, thanks. I had the small rig top plate for my c70 but I wasn’t completely comfortable with the weight of camera body, lens plus accessories all coming off the one point of contact. I’ve changed over to an extremely refined product by 8Sinn out of Poland. It’s in transit. I may do a video on my build when it arrives. Loved your review on the r6 btw. Very helpful in deciding what 2nd body to buy. I wish canon would make an evf for the c70…..Other than that I think it’s the best camera I’ve ever owned.
@damiencooper2 жыл бұрын
I really wasn’t comfortable in the beginning either but it really doesn’t seem to be a problem. I’ve been running with setup even with a 70-200 for a while now without issues
@matthewwinne Жыл бұрын
Thanks, mate. Very helpful. I still haven't decided between the C70 or FX6, but this got me excited about the C70.
@LarsLondian Жыл бұрын
Enjoyed the video and hearing your reasons for running the c70, awesome job and descriptions when talking about your rig choices. Take Care L.L.
@spieker.fotografie Жыл бұрын
Great video! Very clear and all details are in. I work with the C200 since 3 years. Good tool and works fine, but now I am looking for a new one. The C70 is there very interessing with the shown rig. But first we will see what Canon drops in April. C200 II perhaps ;-)
@GDoggProductions13 күн бұрын
wait ... so you can power the C70 directly from D-tap ? i thought you needed a regulator cable of some kind so you don't fry the camera 😮
@gooofy23lol9411 ай бұрын
Hey Damien, thanks for the video! Love the rig and how you set everything up!
@DavidWagelmans Жыл бұрын
Love your channel and awesome personality man 😊 Would you recommend the deity mic for instance for wedding video? Thank you
@macned Жыл бұрын
Almost the size of your old C300 😎
@massakidi9 ай бұрын
how many hours of usage you get with the 150 bebob battery ? That is a very crucial information for this video
@NickHiras-sz3pb8 ай бұрын
Which memory cards do you like best for C70? Do I need 300mbps? or will 200 be enough? This will change based on certain recording formats but wondering which cards you use based on the file you are most often using
@lukeyounge41382 жыл бұрын
That shape HDMI clamp - have you tried it with a right angle adaptor? Would one fit in there? Would be great to have the cable angled toward the back of the camera, not sticking into your wrist when hand held
@velcromedia2 жыл бұрын
Yes, I can confirm that that works. You'll need slim HDMI cables though as the normal ones won't fit.
@GriffinConway2 жыл бұрын
Nice Damien. My build is the almost the same 🤙🤙
@ULTIM8MEDIA Жыл бұрын
Hey! Great Video! I've bought a C70 this week because of your videos. But I've heard about the hinge starting to break and click. Have you had this problem before? And did you also notice the purple blob in sunlight because of the speedbooster?
@tubongekts874 Жыл бұрын
Hi did you find you the link for the vmount base plate and the dtap cable?
@adamhillier7141 Жыл бұрын
I notice you have removed the hdmi cover, is this a safe normal thing to do - I hope so as there is no way of using the cable support with the cover on as you cant get the cover off. Do you ever replace the cover?
@damiencooper Жыл бұрын
there will be tiny bit more risk to dust and water getting in but other than that it's safe. Mine are off all the time
@februusjing60742 жыл бұрын
Hey, Monkeypixels, really appreciate your video, helped me a lot!! I'm a c70 user as well. I'm trying to rig my camera. One question: does the C70 need 24v D-tap cable? I did some research, lots of C 70 D tap cable selling online comes with an adaptor. But, I saw your cable without one. I'm confused that what kind of cable should I buy.
@CD-VP Жыл бұрын
Where did you get your v mount? can you post the link?
@Atsf19762 жыл бұрын
I like your videos and appreciate that you share your knowledge. Do you have any recommendations on how to eliminate wind noise? I bought a Deity microphone to mount to my Sony AX43 camcorder and it doesn't completely eliminate the darn wind noise. Any suggestions would be appreciated. I am thinking of buying a wind blimp, but I have zero clue at what wind speed one should put it on.
@agurgaona29172 жыл бұрын
How long does the camera battery last? (Canon BP-A30) And with V-Mount??
@jackpatmoreinc2 жыл бұрын
What settings do you use with the monitor for the C70 and the R6/R6? Meaning camera settings
@damiencooper2 жыл бұрын
Not sure I understand the question
@jackpatmoreinc2 жыл бұрын
@@damiencooper What are your settings in the camera itself.
@lucaloschi89582 жыл бұрын
Have you tried the Tilta cage on C70? Eventually which were your impressions about it?
@damiencooper2 жыл бұрын
I have. Check out my other rig video
@gordianfritz8349 Жыл бұрын
couldn’t find the v-mount plate. even not in the idx shop.
@damiencooper Жыл бұрын
geni.us/dtbfB pretty sure it's that one
@stewartmoore2 жыл бұрын
Question - Wouldn't you be future proofing yourself for the next 5 to 7 years by having two Canon R5C's?
@damiencooper2 жыл бұрын
how so? I like the R5C way better than I expected but I still prefer the C70. Internal NDs are everything!
@stewartmoore2 жыл бұрын
@@damiencooper good point - thanks for posting these videos
@michaelwood3870 Жыл бұрын
What is the shotgun mic he uses?
@lukeyounge41382 жыл бұрын
Hey, I've been hearing about 'ground loop' issues where people fry their HDMI port by using a single V mount to power both hdmi monitor and camera - do you know why this happens and how to prevent it?
@ArtoflightProductions2 жыл бұрын
No, that is SDI port, and 12g (not 3g). A huge problem on the red komodo, also arri has the problem.
@lukeyounge41382 жыл бұрын
@@ArtoflightProductions thanks for replying, I've definitely heard of people having this issue over HDMI, particularly on BMCC cams I believe. Do you know what causes it? I've heard its when you power monitor and cam off one battery, then connect the monitor and cam together with cable (hdmi or sdi)
@lukeyounge41382 жыл бұрын
@@ArtoflightProductions I've just looked into the red Komodo and arri issue - oh my word. "When possible, avoid using P-Tap (also known as D-Tap) cables to power accessories. To avoid damage when using P-Tap/D-Tap, it’s imperative that the connect/disconnect sequence (below) is followed precisely. "
@Matthew_Stegall2 жыл бұрын
I went through the video and links listed because I just bought my c70 a couple weeks ago. I cant find the Vmount plate that you listed in the video and the battery is on backorder. Do you have a suggestion for these 2 items?
@damiencooper2 жыл бұрын
Oh damn. I forgot to link it. Check back soon for the plate as I need to find it first. And I tried a different plate that didn’t work so I would probably go with the IDX one. As for batteries: You can go with any micro v-mount battery.
@Matthew_Stegall2 жыл бұрын
Hell yeah appreciate it
@nickdelatorre1280 Жыл бұрын
Where did you purchase you call outs?
@damiencooper Жыл бұрын
Motionvfx. Check out the link in my description
@nickdelatorre1280 Жыл бұрын
@@damiencooper I didn't look at the description, thank you for your reply
@ramonb12342 жыл бұрын
Great video! How much Vmount batteries do you regularly on a day of shooting in this setup?
@damiencooper2 жыл бұрын
2 98wh usually do the trick.. but it depends on the shoot
@LonzosStudios Жыл бұрын
I think you downgraded... I see no good reason to go from that beautiful cinema C300 III to a starter C70. As a B or C cam maybe but definitely not a replacement...C70 is for people going from mirrorless and want to upgrade...not to mention it's such a ugly camera
@damiencooper Жыл бұрын
will make a video about that very soon. The C70 has a lot of advantages over the C300
@Makta9722 жыл бұрын
Rig is too tall I hate that
@damiencooper2 жыл бұрын
only with the shotgun mic.. I don't like that either but there seems to be no way around it
@lukeyounge41382 жыл бұрын
@@damiencooper rig would be lower if you ditched the rails and just used the 3rd party battery that fits into the body (those with d-tap on the batt for monitor), then you don't need rails, rod mounting plate, cheese plate... and you don't obstruct the screen at all... in fact what benefit does the V mount offer i wonder?
@front_row_video2 жыл бұрын
@@lukeyounge4138 I have a very similar rig and with the v-mount battery, Ninja V, Sigma 18-35mm lens, the camera's centre of gravity is right in the middle of my top handle giving me a nicely balanced camera. It might be heavier but with it being balanced properly, it puts less strain on your fingers to hold it level. With proper centre of gravity, it pivots instead. Plus the added weight gives the shot extra stability if you're shooting in 24/25p.