Cantilever Suspension on My Turbo Integra is AMAZING!

[@whitecb7coupe176]

That's badass man! How do you only have 15k subs? Your channel is awesome

[@edsoccer14]

WhiteCB7 coupe his channel is only a couple months old

[@rdollfomontoy3719]

He has videos made over a year a ago wdym

[@sampowell3465]

Hes only been trying to make something of the channel and frequently uploading a few months^

[@maker000]

Yeah, I had to sub after watching vid and reading your comment. Right on you m8.

[@HondaVlogs]

Got so much respect for a man that has one camera but will multi angle and walk into a scene. The time it takes to place and then make a squared up scene and get shit done is amazing.

[@BodeVision]

Thanks so much man! Its all time that you know all about! lol

[@baileysims]

KZbin algorithm sent me here, and I am sure glad it did!

[@BodeVision]

Me to man!! Welcome!

[@garageoneeleven9728]

When you’re famous and getting invited to all the underground KZbin parties don’t forget the little people. Pure gold on this channel.

[@BodeVision]

Pshhh in the famous words of Riff Raff kzbin.info/www/bejne/hICzeqKYfsRjeJo

[@sscottphillips1973]

Gonna be sick, that's how you think out of the box, and that's what makes it different and better

[@ViperRoleplayfivem]

Not bashing your welding by any means but you dont want to make two passes on that thin of metal(Honestly on anything unless its TIG). the more you weld on it you actually weaken the metal and the weld is much more prone to cracking. Coming from someone that mig welds for a living it was a big mistake of mine when i was younger before I had actually went to school to get my certs. My welds looked gorgeous but the tensile strength was weaker. For example if you look at alot of big machinery that was welded together they dont make a full pass from corner to corner when they weld it, they will do stitches across because its stronger. Just some food for thought.

[@reckemzz]

isnt it ok to do multiple passes as long as they're not ontop of each other, they're suppose to overlap in the middle ? atleast this is what we learned in my class

[@ViperRoleplayfivem]

@@reckemzz AS long as the metal is thick enough and can handle the heat. Im sure atleast once in class you have burned through thin metal right? I believe he stated he was using 1/8th inch metal, thats pretty thin to run two passes(especially how thick he ran the pass), im not here to bash bodi, i absolutely love his videos and one of my favorite youtubers by far, More just giving me advice in furthering his quality of work. The reason I know a little more about these double passes is i've a few dosen service body racks for work trucks and the 1st and second one I did I overlaped beads making the second one much prettier so when it was powdercoated it would look much nicer and the only crack I have ever gotten on one of my racks was where I ran two beads lol I just learned to run 1 single nice bead instead. If it came out bad or not good enough, pull out the cutting wheel and start over but just band aid it.

[@reckemzz]

@@ViperRoleplayfivem ah, ok got it thanks for the reply 👍 and yes ive burned through more metal than i care to admit lol

[@ejohns4563]

As long as the base metal has time to normalize after the weld, the joint will still be strong metallurgically speaking. I do agree that for that thin of metal a single pass with proper machine settings is ideal.

[@ViperRoleplayfivem]

@@ejohns4563 100%, trust me i've made multiple passes on thin metal and its been holding up 5-6 years now but ideally you want to make a single pass(Unless you are mig welding a joint first than going with a much colder tig weld pass over it for aesthetics and proper coverage. tig welding in general would be much more ideal for this entire process tbh lol

[@Unlaced_kickz]

Wouldn’t expect anything less from the guy that built the first 4door hatchback 🚗

[@BodeVision]

Nofuxgvn _e38 lol thanks so much man! Even though I didn’t build the first 4 door hatch but I do appreciate it! If it’s the first one you saw built I’ll take that!

[@DatBoiOrly]

Man I've seen Soo many custom car builds in my life time and what you said at the start couldn't be more true

[@sparky5879]

One of the coolest suspension setups ive ever seen nice job!

[@jantheman2001]

That's one of the coolest rear suspension setups I have ever seen nice job you got skills and another sub.

[@partsshooter]

Ahh man... That accord in the back! I miss having that car, i have the A20 turbo videos. Great video!

[@5murf495]

That suspension looks sick I love it can’t wait to see what’s next

[@kelvinsanchez4112]

This upgrade just sets the build to a whole different scale. Can’t wait to see this suspension set up in action and your input from this transition rather than regular suspension moventent

[@BodeVision]

For sure man ill have a full review once it drives! Crazy to think ive never drove the car so ill have nothing to compare it to. But i have had plenty of hondas! So i will just compare to that lol

[@cworlpop4405]

That's crazy af man been watching since the Taylor Ray vids I build motors in ny 4 a living but Honda's r my passion so u deff just gained a sub keep the vids coming

[@fiisho]

Popped up in my recommendations. You got a sub!

[@hillbillycustom9037]

When tuners meets mini truckin love it bro

[@reginaldmorton2162]

The point of cantilever suspension is for leverage and mechanical advantage over stock suspension. This is done by extending the pivot point of the shock .

[@zeroswings2]

looks cool... but... it mightve been better to play around with the fulcrum ratios on the cantilevers... you could use much smaller and lighter spring/shock combos and mechanically amplify the spring/damping rates with the cantilevers while simultaneously reducing the forces the car generates... still super awesome set-up!

[@MontyElav]

Pretty cool, this cantilever is a system used on sand rails, baja pre runners etc. Those heim joints are the best for this application. Enjoy!

[@pennycopperhatch9315]

Sick Dude!.....So awesome to be able to fabricate stuff up yourself vs. paying someone....Wish I be able to Fabricate one-off stuff!...

[@BodeVision]

Just take your time and plan stuff out and you got it bro!

[@ritchrc13184]

Can't wait to see this done and how well it works.

[@markkammer2570]

Bode your bg music is the shit just checked out the sound cloud but it makes your already dope channel even better lol keep putting out fire vids I will keep watching

[@brentspellmeyer8943]

Man I just stumbled across this awesome I have been making things since I was a kid and fabricate and weld for a living respect. I like to see things like this done with the basic tools.

[@BodeVision]

Thanks so much man! In the following video i do some 45 degree notches without a tube notcher. Just so much better to figure it out and make it work! Thanks for watching!

[@malikrahman4268]

Man, I am so happy I found your channel! That is a badass system.

[@thehotrodmad]

So much inspiration for my own builds from your channel man, greets from the U.K.

[@BodeVision]

Thanks so much for that!

[@jimmkiiix8540]

Only been a subscriber since you sprayed Taylor rays car, love the videos you do I hate it there so short I could watch you all the time your so clean and tidy and a perfectionist.

[@BodeVision]

Thanks so much for that! Really means a lot!!

[@cleedonjoseph]

That's a awesome setup! Definitely a first time seeing that kind of setup

[@BodeVision]

Thanks man!

[@SparkysAdventure]

That's actually one of the coolest suspension setups I've seen.

[@SleepyTM1]

just paint it black, get it looking like real performance parts

[@musskeeterbump]

This is by far the dopest thing I've seen in 2019 . Nice

[@BodeVision]

Thanks man!!

[@musskeeterbump]

@@BodeVision hey man what inspired you to do this build ? It to me is very unique

[@McTwistedTwisties]

I gotta say, you're getting really good about the on camera personality! It took linus tech tips 3 years to his first 100k subs and 5 years for one million.

[@O.Sanchez]

Amazing 🔥🔥 love watching your crazy, unique ideas !! Keep it up man I can’t wait to see the final stage of this integra 😁

[@TuckedTv]

Those extra 2 should be fine! @11:11 & Silver paint would look clean to mach coilovers & hardware.. Looks good brotha keep up the dope content!

[@krisbaez1309]

Gloss black it looks good so far keep up the good work

[@TheYz250fmf]

Holy fuck this build is going to be so sick...

[@an7d7y]

This is wild , badass! 🔥🔩👊🏼

[@dannyscatpack9947]

I been meaning to make one for my crx build. Ah I only seen eg hatches with that set up.

[@dajuanbrown2013]

Hell yeah great job man. It reminds me of a off road truck. Nice for thinking out side the box

[@BodeVision]

Thanks man!

[@airgunningyup]

this is incredible and should have 1 million views.. man of many talents.

[@arckylie3081]

For the coilovers, did you buy ones w/ spring rates and dampers valved already for your car. Or were they custom. I'm trying to make a cantilever suspension for my genesis coupe and love what you did

[@0420rafa]

Dammmmm...... Told you before great quality content super helpful to the car community

[@BodeVision]

Thanks so much for that!

[@shodenwhitehouse717]

Awesome video, I’ve been wanting to do this to my hatchback since seeing the nrgtech video a year ago or so, keep it up! 💪🤠🤘

[@BodeVision]

Thanks man!

[@jamesfcookjr]

Bode that’s got to be a sick set up when it gets dialed in 👍😊

[@eclxviimerx7588]

If this integra is rockin....

[@KathyWeathersbeeSC]

Dood you should sell those kits from your YT channel to the Honda guys.

[@milk.mp4191]

hopefully your channel gets more popular soon, love your videos!

[@andrewschuepfer6523]

I can't wait to see this done and watch the adjustment process

[@aaronjohnmaughan]

Very clever stuff. Your design would benefit from a torsion bar anti-roll system.

[@jordanfoshow]

I definitely knew what you were talking about from jump street but that is badass bro

[@pec1739]

another perk of the cantilever pushrod suspension is that makes shocks tuning alot easier

[@Sfingus]

Holy shit.... That works amazing ! ! ! ! Easy sub. Great content !

[@BodeVision]

Thanks so much!

[@glynreeves1]

Look good and the 3 way fishtale will make the so much stronger

[@t1mmy13]

Random suggested videos are on point lately, youtube! This looks sick

[@BodeVision]

Welome and i hope you stick around!!

[@BodeVision]

Welcome **

[@casselc9]

Dude that looks so awesome

[@popanollie1]

if you made more of these cantilever kits i would buy 2

[@bryanwithawhy]

Gloss black will look good for sure. I think the base plates should be painted the color of the interior (whatever color that will be), but the bars/brackets would look great in gloss black.

[@King_Kong_Ek9]

Strut bar and suspension all in one 💪💪

[@BodeVision]

Yeah man and in the upcoing video i braced it even more!

[@King_Kong_Ek9]

BodeVision can’t wait!!

[@garywright8073]

Awesome engineering!

[@James-nw8xn]

Interior :space grey with light/medium silver flake!!! Would look sick

[@metalfruttolo9855]

You don't need any front-to-back support on that setup, all the forces are acting on the support tube from side to side and from up to down, just make it a "K" connected as near to the subframe pickup points as you can and you're golden

[@BodeVision]

For sure man thanks!

[@ExOTeX_ZA]

Paint the bars turquoise! It'll contrast with the pink nicely

[@UNKNOWN-zb3qm]

That is soo sick!! I was gonna suggest you should paint it white instead of black to make it pop cuz that looks sexy

[@BodeVision]

Yeah man we will see!

[@Timfloridasavage6319]

Man that suspensions coming out good man can't wait to see what else you do to it keep the videos coming bro 💯

[@chrislecuyer268]

2 things. 1. What are you doing for the front suspension? 2. Paint it purple to go with the pink.

[@BodeVision]

Car wont stay pink and also probably just some standard coils.

[@GamerBoyV101]

I see People use that type of suspension setup for off-roading vehicles it's trippy

[@jayj6596]

Awesome Suspension bro..,that setup is sick 🔥 🔥 🔥🔥

[@GrossStadtAdler]

big props to your channel and your build, just discovered you by youtube. keep on working!

[@wagztec2439]

I love it. Great work

[@joearnold4706]

Flat black sir...awesome build so far!

[@NotoriousZNT]

This is actually insane, good shit homie!

[@traviscain4606]

Startin' my morning off right. I ain't even had my coffee yet!

[@krazyhyland]

That's a sweet set up

[@stocklifekustomz7189]

That’s shit is fire 🔥 please keep the fire coming

[@nicksmith1363]

7:00 i'm pretty sure there are many handbooks on proper automotive suspension design! Cool project non the less.

[@Fishbowl5.0]

Came for the killer paint and stayed the killer fab work 🤘

[@BodeVision]

Thanks so much!!

[@Mr.Saephan503]

The left side looks to be a little higher then the right side but the whole thing looks GREAT

[@ashhks]

Awesome work man! Go white for the bars.

[@mattnsac]

Using a heim for the rocker pivot is no bueno. Should be solid on oilite or needle bearing bushing. Also coulda saved a grip and got dampers off a sport bike with a revalve and proper springs. Dual adjustable, revalvable reservoir coil overs ? Yes please and if you find a BMW or some Yamis, you get a bad ass Ohlins.

[@Oskier94]

I can watch how it moves all day, good job bud

[@manxox]

Love the content big fella one of the best on youtube keep it coming👍👍👍

[@BodeVision]

means so much man!

[@wookidtheoneandonly6230]

Absolutely love the design!!!

[@wenbodong5717]

you may want to add a brace or support between the L and R tabs at the center.

[@tonkatoy9248]

You weren’t lying last year when you said you were going to have a big project in store and I think the bars should all be pink unless you decide on keeping the exterior pink

[@BodeVision]

lol honestly i didnt know what i was going to do, i just knew i wanted to have a dedicated channel build! Solid idea on keeping the pink alive.

[@battlegeek8118]

Hell yeh, nice pretty much how i pictured it last video nice work

[@OfficialSNIxn]

Really impressive stuff man. Subbed. Keep up the good work

[@SAViOR13100]

That is something. Maybe you could weld support bars that would frame how your fuel cell would fit? If you plan to put it in the trunk. But this looks hella cool with the way the shocks are setup. Super easy to change spring weights as well if you want it stiffer or softer. Imagine you get that suspension that your able to adjust rebound and dampening separately😱

[@s00p3rman]

Awesome idea, and really decent Fab work man. I'd probably tie the two center brackets together with a plate welded on the front and back. All the stress is going to be on those center brackets trying to push together. Or better yet, just make both brackets out of one plate. You could then have 2-4 more holes drilled so you can further adjust ride height or use different coilovers down the road just by moving that center pivot point in or out.

[@BiggCliph]

This is so cool! Question for you. How did you go about determining 4” of travel was what you wanted?

[@darrenhattingh7334]

Looks fantastic man! Well done!

[@MattyJ568]

Another vote for color matched to the car.

[@13mudgirl]

Reminds me of an old ww2 plane engine where the rockers were exposed

[@jrryan867]

Very cool , loving the Acura/Honda content!

[@dustinperry4087]

Scotch bright it and clearcoat it sick u built it so be proud of it

[@aidanbarnes9085]

Great work bro looking awesome dude. Can't wait to see how this works on the road ;)

[@BodeVision]

you and me both man!

[@olnobodylo]

Came up as a recommended video. Loved it and for the color i would wrap it with oil spill dude

[@gunthead7043]

Really nice job man. Thats from a fabricators point of veiw. P.S i think this was 1st used on time attack/race cars that wanted wider wheels in the stock wheel well

[@dolanellis]

I've seen cantilever suspension before but it seemed like black magic.

[@BodeVision]

haha i thought the same thing before i looked into it.

[@joeysteinbach5553]

Damn that’s working really good!

[@Cerberus984]

Not a Honda fan but subbed for outside the norm build.

[@BodeVision]

Thanks man!

[@thelude9155]

I really like it Bode