capacitor (part 1) - types of capacitors (part 1) - why we use capacitors?

In electrical engineering, a capacitor is a device that stores electrical energy by accumulating electric charges on two closely spaced surfaces that are insulated from each other. The capacitor was originally known as the condenser, a term still encountered in a few compound names, such as the condenser microphone. It is a passive electronic component with two terminals.
The utility of a capacitor depends on its capacitance. While some capacitance exists between any two electrical conductors in proximity in a circuit, a capacitor is a component designed specifically to add capacitance to some part of the circuit.
The physical form and construction of practical capacitors vary widely and many types of capacitor are in common use. Most capacitors contain at least two electrical conductors, often in the form of metallic plates or surfaces separated by a dielectric medium. A conductor may be a foil, thin film, sintered bead of metal, or an electrolyte. The nonconducting dielectric acts to increase the capacitor's charge capacity. Materials commonly used as dielectrics include glass, ceramic, plastic film, paper, mica, air, and oxide layers. When an electric potential difference (a voltage) is applied across the terminals of a capacitor, for example when a capacitor is connected across a battery, an electric field develops across the dielectric, causing a net positive charge to collect on one plate and net negative charge to collect on the other plate. No current actually flows through the dielectric. However, there is a flow of charge through the source circuit. If the condition is maintained sufficiently long, the current through the source circuit ceases. If a time-varying voltage is applied across the leads of the capacitor, the source experiences an ongoing current due to the charging and discharging cycles of the capacitor.
Capacitors are widely used as parts of electrical circuits in many common electrical devices. Unlike a resistor, an ideal capacitor does not dissipate energy, although real-life capacitors do dissipate a small amount (see Non-ideal behavior).
The earliest forms of capacitors were created in the 1740s, when European experimenters discovered that electric charge could be stored in water-filled glass jars that came to be known as Leyden jars. Today, capacitors are widely used in electronic circuits for blocking direct current while allowing alternating current to pass. In analog filter networks, they smooth the output of power supplies. In resonant circuits they tune radios to particular frequencies. In electric power transmission systems, they stabilize voltage and power flow. The property of energy storage in capacitors was exploited as dynamic memory in early digital computers, and still is in modern DRAM.
ceramic capacitor - electrolytic capacitor - multilayer capacitor - tantalum capacitor - polyester capacitor - mkt capacitor - special capacitor
If you want to see more videos and repair tips, visit my youtube channel:
bit.ly/3Iohsdn
--------------------------------------------------------------------------------------------------------------------------------------
My name is Faryad and my goal in producing the film is to firstly introduce and teach electronic boards as well as troubleshooting and repairing electronic and medical equipment.
I hope that I can share my experiences and knowledge with you in this field.
If you have any questions about the videos that I share for you, I will be happy to send you a message and I will definitely answer you.
---------------------------------------------------------------------------------------------------------------------------------------
TimeStamps Chapter:
0:00 capacitors
0:15 what is capacitor?
1:05 capacitor equation
2:10 series and parallel capacitors
5:25 types of capacitors
6:00 electrolytic capacitor
6:27 dip & smd
7:23 polarity
8:25 dielectric
9:51 how to read capacitor
11:35 application