FCX24 Power Wagon Build: NexxSpeed LCG Chassis Kit & More!

[@CapeCrawlers]

Timestamps The upgrades: 0:40 Installation: 5:49 Finished product: 11:04 Performance tests: 12:58 Indoor course runs: 15:09 Final thoughts: 20:08

[@WickedRemoteControl]

Hey! Just pick up my first micro crawler! Decided to start with the TRX4M. Grabbed the low range gear set and bearings to replace the transmission bushings for a smoother ride. Over the last month I have been going through all of your crawling videos. And I can’t believe how many subs you got in the last couple weeks! Just crossed 1,500 myself! Haha not quite your 58k but getting there 😉 thanks for all of your content! Keep it up!

[@matthewwmullan]

try flipping your rear links right side up. Won't look as cool but you'll probably get that clearance you want.

[@PleasureAfterWorkRcCrawlers]

Do not forget to loosen up the rear upper links with spacers on the chassis to get full articulation...if not, they block on the stock fcx24 chassis.

[@TimHildebrand-cr9mi]

Man I love that you talked about the Unimog cab on this build. I’ve been saying since I got my FCX24 that, a Unimog body would be sick!

[@3TRCGarage]

This truck is incredible, the run footage tells it all. Glad your channel popped up on my feed. 👍🏾

[@annaharpley1673]

if the power wagon had rws oh man it would be insane !!! it already is

[@bobbyspenser7304]

great setup an for sure the unimog cab really looks good an you can see the motor an thats great thank you for sharing

[@bassboomboing]

Looks good. I've been keeping my FCX pretty stock... for now. UNIMOG looks perfect!

[@im2tall1]

The Unimog body looks sick with that chassis,with the exposed motor!!!

[@mikerainey3847]

Thanks so much for the battery info. I'm a huge fan of this little rig. I've modified about a half dozen of them, all a little different from each other! Thanks for what you do!

[@darreneisenhardt5403]

Adam, that's a "drag'en wagon 😁

[@nathanross5406]

Unimog looks awesome

[@MitchellBolognaniRC]

Awesome looking build I'm building a trx4m defender which is so top heavy and a scx24 JLU which is absolutely impressive stock form

[@VS666]

great chassis even given the length, those injora tires putting in some work!

[@CapeCrawlers]

They work great on there. A great match for the build.

[@24Krawlers]

This rig deserves a high preference XL LCG chassis.

[@julianweeks326]

leave all the red and paint the body black, i think that would look awesome 💪💪💥💥💥

[@urgethesturge7253]

Please run that cab!!!

[@napkinbandit5983]

Deadbolt drive shaft hanging as usual..story of my life..0:50

[@CapeCrawlers]

LOL good eyes 🤣

[@domino2205]

another great video, question I get the magnets in the front but what holds the cab in the rear?

[@CapeCrawlers]

Thanks! Nothing it the rear. It just rests on the chassis.

[@domino2205]

its all your fault I got this chassis and the Dark Night chassis because you had to make a video of them but both look great @@CapeCrawlers

[@MineCraftPickAxeXL9]

I got the scx24 deadbolt i think it was a deadbolt it has a deadbolt body, im slowly trying to turn it into a flex beast though

[@quentinsilas5912]

Where could I find extra nuts for the bolts that go through the chassis? I’ve lost a couple already 😭

[@jaycobho4686]

hey! im making a trx4m build and im quitte happy with it but i decided that my next upgrade is gonna be a lcg chassis and i wonderd if u can make a review of the injora lcg kangaroo chassis

[@cat-cambodia1801]

Very good video rc 🤩

[@keithbutler6361]

It might be worth trying small stiff springs in the rear just to lift it a little , just enough to give you some clearance , stay safe mate 🇬🇧

[@urgethesturge7253]

I think it might be time to add on or update the crawler course!! Still a killer track

[@CapeCrawlers]

Yep, it needs a refresh!

[@mikerainey3847]

Hello, from Idaho. Would you have a part number on that 3s battery?

[@CapeCrawlers]

Here you go: alnk.to/fHjZsnC

[@trejodaniel]

Amazing build! I’d say go Unimog!

[@TheNeck-rc46]

You wouldn't consider changing the connection on them?

[@pittysbuilds895]

I wish you would’ve covered how you got the transmission Servo to work, I cannot figure that out! The Servo is way higher on this chassis than it was and there’s no way that stock thin piece of metal is goons reach the back of the trans?? I only but all of this stuff because of your video and now I’m dumbfounded lol

[@CapeCrawlers]

I never did unfortunately. I’m still running it as a single speed

[@pittysbuilds895]

I’m a shamed to admit this, but I figured out my problem 😂…. I had the Servo backwards. Sorry for being an idiot. I’ve built 6-7 of these 1/24th scales and I can’t believe I did that. Guess that’s what happens when you try to build during 15 intervals until your kids find you hiding in the garage lol. Thanks though.

[@olly_silcock]

What shocks did you use on tis build dude?

[@djtazzmtl]

I ordered my extended links from rcawd, the order went through but no confirmation of shipment for almost a week. Do they take long?

[@axellness]

+1 for unimog hybrid

[@MineCraftPickAxeXL9]

One rc rig i haven't seen yet is a dodge power wagon swivel truck

[@Eagle1A]

Uno Mog 👍👍👍👍

[@Jesse_vids]

Things sound like it actually has a diesel engine. Lol

[@CapeCrawlers]

It does lol The steel transmission and brushless motor combo is wicked noisy

[@MaxwellBuckner]

ive been there with the wheel nuts... Do i really wanna change my tires? 😂

[@CapeCrawlers]

LOL the struggle is real

[@CrawlinWa]

Please do a rating your subscribers crawling rigs

[@obama9862]

Can you make a video where you show every car you have?

[@nathanross5406]

He did one already

[@matthewwmullan]

pretty sure you can stretch any 1.0 tire onto a 1.2 rim.

[@CapeCrawlers]

I could cut them too if I really wanted to get them on there

[@rcjoe406]

Kool

[@WOLFTRAXRC]

RAT ROD Uni-mog with a flat bed...

[@garybeckwith9045]

So, basically, total build means no more FMS except for the body.

[@appleslider999]

🤩👍good👍🥳

[@WOLFTRAXRC]

Uni uni uni uni...moG