Tap to unmute

FCX24 - Blue Butcher Gets Some NexxSpeed Upgrades! (Yes, all this works on the Smasher & K5 Blazer!)

  Рет қаралды 4,768

The Shop - Mini RC

The Shop - Mini RC

Күн бұрын

Пікірлер: 70
@luciluu4677
@luciluu4677 Жыл бұрын
Thanks for all, bro
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Any time!
@andrewrichey7374
@andrewrichey7374 Жыл бұрын
Looks great Appreciate you sharing as always
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Thanks so much for watchin!!!
@andrewrichey7374
@andrewrichey7374 Жыл бұрын
Yeah and plus the skid plate is flat ain’t got that tunnel running through it 👍👍😁
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
yep
@troypostie1252
@troypostie1252 Жыл бұрын
I used longer screws to get 1 inch tyres on. Bigger gap. Slowly pull em in. Replace as you go with standard screws👍🤠👍
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
That makes sense!!! I knew there was an easier way.
@coreyfuchs730
@coreyfuchs730 5 ай бұрын
Nexxspeed great product
@TheShopMiniRC
@TheShopMiniRC 4 ай бұрын
Some cool stuff for sure!
@coreyfuchs730
@coreyfuchs730 4 ай бұрын
@@TheShopMiniRC facts
@im2tall1
@im2tall1 Жыл бұрын
Swap the aluminum c hub screw to the back,it increases steering at full throw !!
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
I know. I talked about it in the video. You can’t really because of how the screw is threaded.
@im2tall1
@im2tall1 Жыл бұрын
@@TheShopMiniRC Ahh! Gotcha!!
@andrewrichey7374
@andrewrichey7374 Жыл бұрын
Super cool too bad they didn’t make those brackets black well black sharpie time Yep I’m here watching 👍👍😎
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Thanks!
@TheTomasTube
@TheTomasTube Жыл бұрын
Hey, thanks for the video. It made me realize that "Nexx Racing" and "Nexxspeed" were two DIFFERENT companies and I was missing out on some options for my rig. I'm having a problem with my Furitek Hiroyama . It came with Furitek's Galaxy servo mounted on the stock mount, so it sits at a stressed angle. The gear housing of the servo actually broke under mild (for a monster truck) use, but, while furitek is sending me a new one, they do not have a solution to the mounting issue and claim "it has not been a problem for others". If you have a long servo like the galaxy that has ONE set of mounting holes (unlike the servo used in this video which has two sets) is there any way you could check and see if this nexxspeed mount allows it to clear the upper links? I can't find any info on it anywhere else, and I'd really appreciate it. Thanks again for the great video.
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
unfortunately I do not have a Galaxy Servo from @furitek. However, it should fit although, you might have to drill new mounting holes in the servo ears. (which really isn't too big of a deal)
@TheTomasTube
@TheTomasTube Жыл бұрын
@@TheShopMiniRC Thanks for the reply. The problem is that the galaxy servo I got with my hiroyama broke because it was mounted on the stock mount at and odd angle. They're sending a new one, but I'm extremely hesitant to drill holes in it. I'm working on a 3d printed solution, but I'd much rather a nice product like the nexx if I knew it would work. Thanks for trying to help.
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
@@TheTomasTube you can always drill and tap new holes in the aluminum servo mount.
@Hannsom7
@Hannsom7 Жыл бұрын
them rims and bed is super cool man i like it. you like the fms better then the scx24 ? i been debating getting one
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
They both have their positives and negatives. If you don’t have an fcx yet, definitely worth getting one.
@DanPRC
@DanPRC Жыл бұрын
The crazy part is I just ordered this chassis yesterday. I was searching for videos and reviews of it before I bought it but there were none.
@maxwell5428
@maxwell5428 Жыл бұрын
Hey I seen you on the FB group
@DanPRC
@DanPRC Жыл бұрын
@@maxwell5428 Yup
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Sorry. We got it up as fast as we could.
@troypostie1252
@troypostie1252 Жыл бұрын
Super new chassis that's why
@DanPRC
@DanPRC Жыл бұрын
@@TheShopMiniRC No complaints. You’re the first showing of this chassis.
@TimbukTu0264
@TimbukTu0264 Жыл бұрын
I just purchased FMS masher. Does it hold up well to general bashing with stock motor without spending a fortune on unneeded upgrades like steel trans gears etc? Thanks and cool build👍
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Yep, it’s a blast you really don’t need all the upgrades unless you upgrade the motor.
@maxwell5428
@maxwell5428 Жыл бұрын
I’m curious why nobody is making a 2 speed skid/adapter kit for the fms scalers. That being said, it’s It’s nice to see a chassis for FCX24. More shock tuning is nice.
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
I agree.
@praetor47
@praetor47 Жыл бұрын
you mean a skid for the 2speed tranny that would fit their 1/18th trucks? if yes, i find it just as baffling. even more baffling i find that literally nobody even tried to make a motor mount for anything bigger than the stock 050 motor (which is easily the weakest point, by far, of their trucks)
@maxwell5428
@maxwell5428 Жыл бұрын
@@praetor47 yeah. Seen a bunch of people swapping the fcx2 speed/ portals into the fms 1/18 scale trucks. Hell they could even make a chassis as well. They all use the same frame rails, just in varying lengths.
@DTW-bx2vy
@DTW-bx2vy Жыл бұрын
The FCX24 uses a 130 size motor.
@maxwell5428
@maxwell5428 Жыл бұрын
Fcx118 finally came though.
@andrewrichey7374
@andrewrichey7374 Жыл бұрын
Yeah Phillips screw for the servo I hate that also
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
right? why is it so hard to get a hex there?
@kevincasey6876
@kevincasey6876 Жыл бұрын
Can you swap sides with the c hub so the screw is in the back ?
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
I think that will mess up the caster angle.
@kevincasey6876
@kevincasey6876 Жыл бұрын
Maybe it will correct the caster problem you ended up with ?
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
@@kevincasey6876 hmm. I’ll look at it. The problem was the axles and links though, that was causing the driveshaft to point too far down. Changing the c-hubs wouldn’t fix that. But I’ll give it a look for sure. ;)
@kevincasey6876
@kevincasey6876 Жыл бұрын
I don’t have my Smasher yet but looking at photos on Nexx racing of these C hubs it does look like it will work out .
@kevincasey6876
@kevincasey6876 Жыл бұрын
It doesn’t look like the links bolt to the C hub , And I’m sure Nexx knows how to measure links to copy them Notice on the axle side of the C hub there is a star pattern . That pattern is clocked slightly .
@DustinWoloschuk
@DustinWoloschuk Жыл бұрын
You should get a 3D printed fifth wheel hitch and throw that on there I've never seen anybody do that before
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
That would be dope!!! Wish I printed.
@JayMillz517
@JayMillz517 Жыл бұрын
@@TheShopMiniRC I can hook you up with something. Message me and I'll send you a lil scalers package.
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
@@JayMillz517 not sure where to message.
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
@@luciluu4677 for what?
@aaroncozzoli
@aaroncozzoli 10 ай бұрын
I love those wheels, I can’t find them, or the link to them, does anybody know the name of them?
@TheShopMiniRC
@TheShopMiniRC 10 ай бұрын
They are linked in the video description. ;-)
@crocsonletsgo9665
@crocsonletsgo9665 Жыл бұрын
Link is missing.
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Sorry, I added it. Thanks for the info! nexxspeed.com/index.php?route=product/category&path=492_463_507
@rctarded3834
@rctarded3834 Жыл бұрын
Wpl tires fit
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Nice!!!
@rctarded3834
@rctarded3834 Жыл бұрын
@@TheShopMiniRC the kit tires are kinda soft .thier tall as smasher tires just not as wide
@praetor47
@praetor47 Жыл бұрын
after i caught them astroturfing, and not understanding the first thing about crawlers, they became THE most laughable brand in RCs, as far as i'm concerned and permanently on my blacklist. hard skip
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
You mean being named nexx like Nexx racing? Yeah…. I agree. I told them to change their name. At least just 1 x or something.
@praetor47
@praetor47 Жыл бұрын
@@TheShopMiniRC no, i mean literal astroturfing. i caught them making multiple accounts on facebook to try and defend their product and pretend that's actual customers being happy with their purchase. a practice, in this day and age, i find despicable in a niche hobby (like ours)
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
@@praetor47 oooof. Yeah, that is no good.
@christopherallen9238
@christopherallen9238 Жыл бұрын
@@praetor47 Hi Patrik Đurđević You have sown bad things about NexxSpeed while we don't say anything about your negative comments on fb. Good for you! You have the right to praise or criticize that is your own opinion, but there are customers who like to buy NexxSpeed products it is true. No defend. Just because you don't like it, doesn't mean everyone is like you. We are still working hard to improve the quality product. It's bad when you only think negative things!
@christopherallen9238
@christopherallen9238 Жыл бұрын
​@@TheShopMiniRC Thank you for your video and I think you are wise to judge. NexxSpeed and Nexx racing, the products of the two sides are not the same. Just a coincidence due to the similar name. But now thanks for your video everything is clear!
@brianbiro9094
@brianbiro9094 Жыл бұрын
Nice! But Tire direction is OFF MAN 😜👊👍✌️🦅🇺🇸🦼
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Sometimes they run better backwards… And sometimes I just don’t care. ;)
fms fcx10 Chevrolet blazer k5 with new injora accessories
1:46
Thank you mommy 😊💝 #shorts
0:24
5-Minute Crafts HOUSE
Рет қаралды 33 МЛН
I'VE MADE A CUTE FLYING LOLLIPOP FOR MY KID #SHORTS
0:48
A Plus School
Рет қаралды 20 МЛН
FCX24 Power Wagon Build: NexxSpeed LCG Chassis Kit & More!
21:40
Cape Crawlers
Рет қаралды 10 М.
Fcx24 K5: The Best Tires For Your K5 Quick Fitment Guide
13:49
FCX24 board and lightcontroller explained
19:09
donaldsneffe
Рет қаралды 6 М.
NEW FMS FCX24 K5 BLAZER RTR! - Unboxing, Review, Crawling & More!!
27:07
Thank you mommy 😊💝 #shorts
0:24
5-Minute Crafts HOUSE
Рет қаралды 33 МЛН