Building my First Dump Truck - Shade tree Engine Swap!

The heart and brain are removed from an old ford 350 and I get the old ford super duty ready to receive them.
Facebook:
/ captainkleeman
Instagram:
/ con. .
TikTok:
vm.tiktok.com/...
Redneck Engine Swap - Can Two Fords Make a Right?
DISCLAIMER'. this is not a how to video and I am not responsible for any actions you take on your equipment or property
#captainkleeman
#mechanic
#builtnotbought

[@brianelliot2719]

All the heart surgeons watching this are saying “thank goodness I have an easier job…this is way too complex” 😁 Thanks Mike, fun project, I’ve never seen a heart, I mean an engine, swap.😊

[@home-powersystems7782]

Hey Mike you're doing it all wrong, do it my way, I know best. Just kidding, I laughed when you were waving at us after we had fallen over. Nice vid.

[@CaptainKleeman]

🤣 thanks for watching!

[@brucehuff5566]

Gonna be a fun project to follow. Stay safe

[@CaptainKleeman]

💪

[@williammeiklejohn2850]

IS IT WORTH IT?......I'd say heck yeah.... This is a great video...I love this kind of stuff

[@CaptainKleeman]

💪

[@StephenResar]

A feller just can’t ask for anything more. A terrific fall day, the smell of the neighbor's wood burner and the Kleeman Auto Parts Inventory & Management System working flawlessly. It’s fun watching the maestro play. 87% that’s the new T-shirt design!

[@CaptainKleeman]

Definitely a great day

[@ronneidert]

Capt'n, I wish I could properly convey the shear amount of joy i get watching you 'dismantle' a ford with a Halligan tool! Keep on keeping on!

[@dennisroberts6698]

Isn't it fun, Playing with your Toy's LOL Well it is for me, watching you !

[@mattbyrne6283]

Yeah buddy hey I’d say just use the big radiator since it fits the super duty . I always say cooler is better ! 😁👍

[@daneclark3161]

You are fortunate. I couldn't have been under that truck for more than 30 seconds without knocking a piece of rust off into my eye. 😬

[@thebear5454]

"When in doubt...break it out". Always start with a clean slate Mike.

[@CaptainKleeman]

Exactly!

[@Jammer.1]

Mike you need one those harbor freight portable garages so you got some cover for the weather & you could use a small wood burning stove in it for some kind heating !

[@jeffreybrookes9731]

I need to remember to wear safety glasses while watching you. I keep getting hit in my eyes with things.

[@CaptainKleeman]

Absolutely

[@seansysig]

Mike you crack me up with your humor. Winging it instead of researching how to tear down and reinstall is content driven, but as parts availability shrinks it can be project killing.

[@CaptainKleeman]

Parts availability is not an issue with these trucks. Also, by the time I research how to do something, I could have already had it figured out. Not rocket surgery. Appreciate ya watching!

[@willb3018]

The variety of your projects is something. You will tackle anything. Fun to watch.

[@MitchGaar]

Mike the shifter tower doesn’t have to come off! Just turn the collar at bottom of shifter counter clockwise, and shifter comes right out! No need to remove any bolts on top of trans, just the pan of cover! Hope that helps! Keeps from dirt getting into trans too!

[@CaptainKleeman]

Well if I want to inspect the gears it does...

[@jameshelton8095]

Gas powered engine hoist, nice! Thank you for sharing

[@CaptainKleeman]

You bet

[@dansevern3291]

Well, Captain, you may not be doing a "how to," but you're reminding me "why not to." I think you've convinced me to try and find another rebuilt injection pump for my old diesel pasture pickup, instead of swapping it out for a gasoline engine. (Besides, I still don't have a halligan for disassembly purposes, and I've moved 250 miles away from where I knew all the folks at the FD).😁

[@CaptainKleeman]

Gotta get that halligan!

[@kevinkress5993]

It’ll be fine, that’s fine.

[@jeffmentzer9186]

I had a white ford truck exactly like yours. You couldn't kill that 460 engine if you tried and believe me, I tried! Awesome engines in my unprofessional opinion! Thank you for bringing us along on your adventures Mike!!!

[@budlvr]

I will enjoy seeing you put this mega-puzzle back together again!

[@brenthagen8077]

Not sure how you do it but to keep track of all the nuts and bolts and little parts on a job like this I put them into sandwich baggies or other plastic bags and tape them to the component ie all the screws for the dash get taped to it, that way I don’t just have a big box of screws!

[@LisaMedeiros-tr2lz]

That is how I do it to, except I will use an awl and poke a hole in the back and use a bag tie to attach it to the part it goes with. If there is something unusual about the part (i.e., one bolt longer than the other), I will write notes on a piece of paper, cut that off, and throw that in with the bag. No way to remember where everything goes. Doing this, I don't end up with empty holes with no fasteners, or any left over.

[@bobmoroney3643]

I'm almost as excited with this project.. Can't wait to see it cross the ROCK BRIDGE.👍

[@CaptainKleeman]

You and me both!

[@michaelmullins1290]

Everybody has a fun way of doing things. Yours is definitely fun for you and fun for me to watch. Win win.

[@sassafrasvalley1939]

Cap’n, one winter I got a 5000 piece jigsaw puzzle of a Spaghetti on a plate. It kept me busy for months…. Me thinks you’ve opened your own puzzle box. I hope screws, wires and assorted parts go together easier than Spaghetti

[@CaptainKleeman]

Me too lol

[@mrbibstoo]

"Wiggle & Peek" Works for me! 👊👍👊

[@CaptainKleeman]

💪

[@markkenes4848]

CPT at one time I was you. Now after getting sick back in 2019 and getting old I got one project left for me to get done. My log splitter. Went and bought a 16 HP Honda motor with electric start. Just got to go threw it change oil, clean carb, spark plug hook it up and run it. After this I'm doing my riders and that's it. I hate to say it but it's time for me to take it easy my friend. Just do more tinkering . Hey I can live through you bud !!!! Your doing a super job CPT keep it up 👍👍👍👍💪💪💪💪💪💪

[@CaptainKleeman]

💪

[@garulusglandarius6126]

Holy sxxt Mike, you don’t mess around. Just the fact that you’re attempting this project is inspirational 👍 Great work as always, best wishes from Britain 👍👍🇺🇸🇬🇧

[@paulvanhouts3365]

Hi Mike, if you have empty plastic containers from yoghurt or ice cream they can be very handy to hold parts, bolts etc. I also think that a plastic cat litter tray is a good tool tray for outdoor motor work. I have used these for rebuilding old cars and tractor. I also finger that speaker magnets under steel bowls are a great way to hold things in awkward locations. I am enjoying this voyage of discovery into the building of one truck from 2.

[@jimurrata6785]

There's a hole for a pin (paperclip?) in that ignition switch. Pin it in place before you tighten the switch down to properly align the key functions at the tumbler.

[@CaptainKleeman]

Hahaha, this is a tip I needed for sure. Thank you!

[@jimurrata6785]

@@CaptainKleeman i told you I'd be glad to offer advice, if i could. 😄

[@jimurrata6785]

According to Gary the pin is .047 (3/32) diameter You'll find the hole in the metal 'foot' of the switch, ahead of the actuator rod. Put the key in the lock position (push the button on the left of the column) and remove the key. Then you can tighten the slotted base of the switch. Remove the pin and check that the key will engage the starter and that everything that is supposed to work in run and accy positions functions.

[@PurpleCollarLife]

Great project! I'm looking forward to the next step.

[@deanbarr5740]

Always enjoy your videos Mike. I remember those days of swapping engines. Mi youngest brother was about the best I ever seen. He could swap em in 4 hours time, and have it running. Good video buddy.

[@lastguy8613]

I used to do it but wasn't very good at it. One time I swapped a gear box from manual to auto and changed the steering rack from manual to power steering. Then rolling down the street going slow and wondering what the clunking noise was the vehicle flipped on its side like a bomb had gone off! Turned out I hadn't tightened the front wheel nuts and one wheel came off and flipped it under the guard lol

[@Yackhammer75]

Just a suggestion learned from experience gained the hard way. While you have the engine out, replace all vacuum lines. You will never have better access and unless you just did it yourself it is a huge headache saved later.

[@americanpatriot2.06]

Had a friend who wanted to convert his old gas chevy truck to diesel. Thought swap the engine was all it would take. I spent a good part of the day showing him ALL of the differences between the two trucks. Both trucks were the same year and body style, and in amazing condition for their age and mileage. The diesel was four-wheel drive, and his gas truck was two-wheel drive. He was having second thoughts on the swap when he saw the amount of work he'd have to do. The only thing wrong with the diesel truck is it had no bed but used to have a flatbed that the seller kept. His truck quit running because his fuel tank was rusty. I convinced him to keep both. He could find a bed for the diesel for cheap, and replacing the entire fuel system in his gas truck was cheap also. He took my advice and kept both trucks. He even replaced the fuel tank and lines for the diesel since they were the original parts. Now he has his gas work truck for everyday use and the diesel for heavy hauling. He's in the process of saving up to have both trucks repainted. Frames will be sand blasted and recoated, and the body will be stripped to the metal and resprayed the factory original two-tone brown and cream. The interior of the cabs will be re-sprayed as well as the beds get bed lined. Of course he will do one truck at a time.

[@grosseileracingteam]

That's a lot of work Mike, but having your own dump truck and TLB will be well worth it. Thanks for posting.

[@CaptainKleeman]

Will be a huge asset for sure

[@rhondasweeney7271]

Captain, thank you for being you. Love all the things you do, this one is very exciting. I really hope everything works out with the two trucks.Thank you for sharing! 😊

[@CaptainKleeman]

I hope so too

[@Michael-fd8ob]

It’s a nice 50 hear too. And finally the rain stopped after 4 days then after today it’s going to rain again. Good video Mike and good to see you Doug this to make a good truck it f them. Keep up the good work man!!! Sounds like a typical ford fan. I’ve had to change then often.

[@jimmowers7675]

Good evening Mike. Gosh, I really enjoy your videos. Thanks for sharing.

[@thomasingramfarms230]

Got a long road ahead but the challenge is what will make it so rewarding in the end and by the time you are done with it you will know every inch of the truck

[@CaptainKleeman]

Exactly

[@MrGoesBoom]

Not sure how well this will work in the end, but definitely an interesting journey you're taking us on Captain. And hey, it doesn't have to be pretty, it just has to work

[@tmacie2]

The good part is, you'll know every inch of the truck. when issues arise you'll know pretty quick if it was your "fault" or not! LOL. Keep up the hard work!

[@CaptainKleeman]

Definitely!

[@lyleminyard2308]

Freeze plugs, big dog? Good job on the video. Thanks buddy.

[@michaelowens9791]

Halligan tool, a firefighter best friend! Obviously not just for force entry,but also forcible front clip removal. 😂

[@patrikpersson9446]

Have fun, build a dumptruck, we are right here watching !

[@CaptainKleeman]

💪

[@mikedalton4697]

Great idea to switch the heater core out now!

[@CaptainKleeman]

💪

[@mikesmith8952]

The heater blower motor that squeals like a piggy can be fixed easily, at the hump at the center of the motor use a center punch to make a small hole then add some tranny or motor oil. Yoycan also drill a small hole. When its done dab some silicone on the holt and your done.

[@harveylong5878]

somewhere there is a Ford purist raging. Capt got yourself a challenge ahead. you think Clinton would be kind enough to drop off one of his many many Ford's for reference? replace what gotta get replaced, refurbish what is salvageable. only thing Id be kind of suspect about is the harness out of the gas truck.

[@ianwille5780]

That fan sounds like a sick cow in a hail storm!! All that work you did swapping out the entire transmission and motor. There were only a few more bolts wires and connections then you can lift the cab off the frame with the triple nickel. Soap the motor in and plop the cab back on.

For a guy who's never done heart surgery on a vehicle before your not doing to bad your doing it right way taking out the loom from petrol and putting it in what was diesel way easier than cutting looms apart and adding wire

[@MJMCHRONICLES]

Omg, the never ending project😊

[@fhuber7507]

Old refrigerator box under the vehicle makes a nice barrier vs the dirt/rocks and you slide on it easier than on a tarp. Almost as good as a creeper on concrete.

[@JohnSmith-tv5ep]

MIKE! ... time for a 'Kleen' hoodie after that one! ..Carry on Cap'tn !

[@ronaldheit196]

Captain, if you're enjoying doing this swap job then that's just fine as far as I'm concerned. You seem to be enjoying yourself. The taking apart half is not to difficult. It's putting it all beck together that'll have you cussing up a storm sometimes. Myself, that's always the fun part. Figuring what goes where and how to do it just makes it more interesting. Keep up the good work Captain. Ooh, keep on knocking us over I'm gonna have to bill you for my Tylenol costs. Tools and parts upside the head tends to hurt 😂

[@Wewoka54]

Great work Mike..really enjoy your videos thanks for sharing..

[@CaptainKleeman]

Thanks 👍

[@504carl]

The best part about when you finish transferring the engine you can sell the other parts as scrap.

[@leer-winnobbeefarms2131]

Today's episode reminds me of the famous breakfast cereal: Snap Crackle & Pop! Great video! Can't wait to hear the engine roar in its new home and then see you drive it away! Thanks, Mike! Lee

[@robertrabhudsonhornet5869]

It's looking good so far I'm thinking it's going to all swap over with not too many problems but it's a big project but I think you can do it an work great for you for meny of years 👍

[@CaptainKleeman]

Fingers crossed!

[@southernyankeehomestead3230]

Don't forget to swap the brake booster. The diesel will have hydro assist while the gas has vacuum assist. They both work fine but the vacuum will be a little easier to plumb since you're putting the gas in it.

[@jimurrata6785]

He could swap the diesel's power steering pump with return for the hydroboost. Id prefer the hydroboost over the vacuum assist but to make it "right" Mike would either swap the brake pedal from the Superduty or drill another hole in the gas pedal arm. That pedal is tougher than shoe leather and harder that a coffin nail. (use carbide because a cobalt drill bit will dull)

[@mikenixon9164]

Be careful with those ratchet straps I don't think they are rated for lifting. Fun video as always!

[@Bman2020]

I know you will get it running it will be fine your time is yours to do what ya want to have fun 👍👋🇨🇦

[@bullittdog4352]

You have me intrigued when talking about the new world headquarters.

[@brentking-gmailking2570]

Coming along good.

[@CaptainKleeman]

Thanks!

[@Jamieclarke88]

Thanks for sharing mike really enjoying the truck build series love your attitude and run what ya brung motto 👍👍👍

[@michaelmcclure8673]

Captain Kleeman, might want to take a peak at the clutch on the gas engine while its out.😊

[@mrbadkins007]

I would like to suggest that if you’re pulling the entire dash out, this might be a good time to just go ahead and replace the heater core since you’re so close to it.

[@bestmxer01]

They should call you claptain kleeman. Always making clapped out stuff not so clapped out. I like it. I can’t wait for the third function install on the ole 555.

[@CaptainKleeman]

🤣🤣🤣

[@tedbutts6932]

Mike, I love this project. you are impressive buddy

[@CaptainKleeman]

Thanks 👍

[@royscarbrough3589]

I would use whichever radiator is easier. Your gonna need to block part of it when it is cold and more cooling is better when you are working it hard.

[@Mad-Duk_Machine_Werkes]

A Non-leaking heater core makes a good radiator for your go-kart with a dirt bike motor in it......

[@CaptainKleeman]

Good point!

[@kinagray8056]

Aloha Mike, I am thoroughly enjoying everything you do! No matter what project you take on is great, entertaining and hopefully entertaining to you! You’ll enjoy watching all your adventures even more as you age! Mahalo, Kina

[@CaptainKleeman]

Thanks!

[@annbilling7036]

Love watching your projects

[@CaptainKleeman]

Thanks!

[@retiredchiefcharlie]

Only a firefighter would do an engine swap with a Halligan Bar 😂👍

[@CaptainKleeman]

🤣

[@ThatOneGuy-ot1qd]

Enjoyin it Cap'n !

[@TheTed169]

Mad Max it. Hey that's a good name for it too. Ha. Diggin da build, thanks for sharin. Cheers from da ROCK!

[@mardimccabe6207]

I can see all your experience working on the Fubaru coming into play here!

[@jimdaly5077]

Hi, wiggle & peek sounds like the local law firm. 👍🐝🌞

[@arthurpage3175]

in this case you should support thr truck onstands while working underneath even though its on its wheels, dont know which bit you would pick though

[@GARRISONRANCH]

Nice use of the halligan

[@hollandduck79]

Hello from the Netherlands. thanks for the good video Mike . Kind regards, Hollandduck

[@rons3103]

Careful pulling off all those spare parts. Remember, we're on a budget! and eBay Motors is not cheap for OEM parts! 😁😁 I'm so glad this is not a give away channel where you win a chance to come down and smell the inside of a dump truck that was formerly infested with rats! 😂😂. BTW, is there enough good steel off the old truck to weld onto the replacement?

[@mcqueeninc]

I think this project is great and I can’t wait to watch every video and see the progress and end result it’s going to be awesome 👍

[@CaptainKleeman]

Fingers crossed!

[@user-do9iu3qx2z]

Someone send this man some impact tools!! Keep wrenching brother! 👍🏻

[@zedicus11]

When you put back together, you should make a brush guard with a winch. That way, if you get stuck in the mid, you can pull yourself out instead of needing to get another machine.

[@CaptainKleeman]

That would be pretty awesome!

[@georgerogers542]

I've had to do the same thing with work vans , you have it so much easier . It looks like fun .

[@todds9503]

It’s Fine ! It will be fine 🤨👍

[@CaptainKleeman]

💪

[@user-ys3dh5gl3o]

Nice to see you using a surplus Halligan Tool, like a good fireman would ... lol

[@InspirationalTreeGarden-mo2fg]

I would patch out of both or if costs aren't bad but a new one coat it as it take a lot of chemical spills😊

[@kylejones2075]

Oh boy thanks for sharing 🎉😅

[@williamd6967]

All hand tools your a determined fellow lol.

[@CaptainKleeman]

No a fella is broke and can't afford fancy tools 🤣

[@kenthesparky178]

Wiggle Peak & Kleeman a law firm name for sure.

[@CaptainKleeman]

Lol

[@kevinkenyon7045]

Captain thanks for sharing! Kevin

[@CaptainKleeman]

Thanks for watching Kevin

[@keithwallington4966]

the old flintstone mobile i think its a good thing you changing it out 🤣😎👌✌

[@CaptainKleeman]

💪

[@jimurrata6785]

I was going to mention the ground from the bolt under the wiper motor to the intake, but I guess you've got that covered. 😊 The little tin heat shield on the drivers motor mount keeps the rubber from being cooked in short order.

[@warrenvalentino5763]

Great video! love the flinestone floor in the old ford 350 donor truck. i Love watching your videos. :)

[@allensharlow7763]

Well Mike , I know you will get your truck in shape, you always get things done and going good👍👍😎😎🍮🍮

[@CaptainKleeman]

Thanks 👍

[@LeeintheWoods]

I'm jealous of your engine hoist. Mine doesn't dig!

[@CaptainKleeman]

It's got some handy features

[@alanbierhoff6831]

Are you going to replace the Flux Capacitor or just use the old one? That old hood might make a fun sled for the girls on the back hill this winter. Put a couple of seats on it 🤷‍♂️😆

[@CaptainKleeman]

Gonna try and rebuild the capacity 🤣

[@CMDSR]

Sometimes you kinda have thank the good Lord for turning the lights down. Gives you a real good reason to stop for the day.

[@goptools]

Hi Mike. Making good progress. Checking the heating components now is something I was going to suggest but you just went ahead and did it already! I think that with the 2 trucks you should be able to make one that's at least 87% fully functional. The only potential gotcha is if you have them both apart and don't recall how to put it back together. Hopefully having the videos as reference will help. -mike

[@danieldavidgaede6550]

The core support on all those old diesels are all cracked in the same place, just like mine

[@CaptainKleeman]

Seems to be pretty common

[@MrZZeroG]

Always a great way to start the day. I wish we could get them up as often as you do! That 455 is a fantastic machine. I’m starting to lean back towards backhoe from skid steer for our farm.

[@genesispuredeaf2390]

It sounds like he is occasionally saying 455 but he is instead saying Ford 555. 😊