All Things Modular - Tactical Twinshock

[@jonahhex6593]

It was only a matter of time Adorable intro also

[@imtoolazytocomeupwithaclev2323]

New intro seems legit

[@mr.crusader3201]

WarDude Films the new into is kinda cringy!! Lol😅

[@idiotsupreme8685]

STRONGARM STOCK ATTACHMENT POINT. MAKE IT HAPPEN.

[@Fpsdan482]

Gonna be hard, since it primes from the back. Unless you use the sling point on the handle.

[@idiotsupreme8685]

he did it to the hammershot and the jolt

[@Butt_Surfer]

Maverick

[@ignacionowakowski3406]

Pfft. Just use a spectre lol

[@calybri1214]

Ignaxpro Gamer but the strong arm can take k26 with a little work.

[@JosephArata]

Your Mega Magnus shotgun video inspired me to create my own shotgun using the Magnus. Only, I'll be integrating the Centurion butt stock and the barrel extension to make a Sci-Fi tactical shotgun. I've considered the possibility of integrating a fixed centurion 6-round magazine, but I'm not sure if I should with this build I'll be working on. I'll be keeping the top feed mechanism intact though.

[@CaptainXavier]

Nice! That would look epic!

[@thebidynamos]

Captain Xavier is our saviour

[@Korviliath]

Savior of Misbehavior

[@rylanmiller6823]

you are quite the poet sr Jackmanmeteor

[@thebidynamos]

Cheers lad

[@rylanmiller6823]

cheers

[@camerong7365]

Savior of misbehaviour named Xavier. (Yes, I know that isn't his actuall name)

[@themessenger1680]

Hey cap! imagine if the dart holder on the stock was spaced so it lined up with the barrels and you could put the darts in the holder head first and just de attach the stock or dart hold and ram it over the barrels to quickly load all, if the darts did not get stuck. Could be a cool speed load. Just and idea I had.

[@CaptainXavier]

That would work...but I'm fair certain detaching the stock and doing what you describe would take longer....OH! You mean both sets of barrels at the same time!? ...you might be on to something there...the issue I see is the transfer. If the dart holders are deep enough to hold the darts (or tight enough so they don't fall out) there might not be enough dart exposed to get enough grip in the barrel to pull free of the dart holder...perhaps something that pushes from the bottom of the dart holder to force them out and into the barrels?

[@themessenger1680]

Captain Xavier yah that’s what I was thinking could be a cool idea though!

[@ianfarquharson3772]

Love the new intro's. You seem happier now the job is permanent and I'm glad. Keep up the good content. Good vibes to U and yours. TkEZ»UK

[@ZachsGametube]

this might be my new favorite series you've made mate! keep up the great work!

[@TheTransforcer]

Your enthusiasm is greatly appreciated.

[@homelee665]

So cool. Glad to see this come together after the K26 episode.

[@travisshea9809]

Looks great. Love the work again!

[@aidangreenfield3374]

How much abuse has your camera seen filming your intros?

[@CaptainXavier]

Much...much abuse.

[@noquemalive7111]

Lol

[@chsameer2794]

*not enough*

[@jedileader0174]

For next QnA, what advantages and disadvantages of a double bladed, doubled edged sword have?

[@CaptainXavier]

Ask this again on the previous Q&A video or it will get lost. I only pull questions from the previous Q&A video.

[@tristanladd4503]

so did you see the hot glue gun thing? anyways, i think a internal mag dealy on a stock would go great with this. since it would be really easy to take the darts out and it would keep it slimmer if your trying to shoulder it and theres darts in your armpit kinda dealy.

[@iceybobster]

Love it and the intro

[@TheCatpirate]

Why not make the dart holders speedloaders? Just pull them off, place 5 darts in at once, Bam! They have more function. More tactics! More awesome!!!!!

[@wadekirby8575]

That would be cool. Do you think magnets,key mod type pegs or velcro would work best? They would need to hold the darts upside down (and because of the heads on nerf megas) you'd have to make them brand specific.

[@darrellscales8146]

Take the double breach amo holder

[@reentrysfs6317]

Like make a clip that attaches to the front of the gun And push the maga dart I would like that the space where you push the mega darts in to be made of rubber Or foam

[@ckeyser3231]

I did something very similar with mine. I added a pump grip from a vagabond and a stock from the motostryke. I also plan on adding a carry handle from the motostryke.

[@convictedmelon4608]

Great video as always, good sir! Giving love to my new favorite mega!

[@tanners9730]

I love your modular jolt! So jealous of its tacticoolness. And fun fact guys 1/2" 2" long sprinkler pipe work GREAT for blow guns especially if you add a 1/2" threaded to 1" slip converter then a 1" coupling

[@harryblackmore6371]

Great video keep up the great work

[@jedileader0174]

At 7:01 you can see a blue elite dart at the top left corner of the measuring tape.

[@CaptainXavier]

...random...at 7:02 you can see grass...

[@jedileader0174]

Captain Xavier, 😁 lol

[@squidplayz2872]

Captain Xavier t

[@ethangoldsmith9332]

Can you though?

[@jedileader0174]

Ethan Goldsmith, yes.

[@nerfeclipsisdraco8101]

you should have made the stalk a speed loader then you could take it off and speedload then reattach it

[@snorribjorn5074]

Excellent work, as always.

[@niggo8599]

You can put a double breach dart holder on it

[@thegreenmessor3809]

First time seeing your new intro Captain and it's COOL!

[@tylerk9533]

Love the twins shock plus your mod is the best. I'll try to do the same!

[@phamilyphun1367]

Yes! Thank you Xavier I partially asked for this, now you just need to re barrel this and your golden

[@friskyobject4126]

Oh snap that looks like a beauty

[@adynholden9546]

I didn’t know till two days ago you were on discovery channel for Canada (I was not surprised because of how awesome you are)but it was a good video

[@JamieTenikoff]

LOVE it

[@jeri_v2578]

I love the new intro!

[@maplesyrup154]

The double breach has the five dart syorage on the side if u take two of them and put it on the recon mkll stock

[@CaptainXavier]

+Maple Syrup indeed...assuming you have two double breachs. Sadly, I don't even have one. :(

[@mikayadegraaf3155]

You could use a double breach ammo holder that comes with it on the side.

[@jeffreycarman2185]

Awesome blaster! Any updates on this?

[@kellanpeet8298]

this is amazing! keep up the good work.

[@Amiga3000D]

Beautiful work on this twin shock btw. I should havesaid that in my first post.

[@chimp3103]

omg Xavier you have truly done it this time, that gun just looks beautiful. 10/10 hasbro should hire you for nerf gun design.

[@mattvonnerf3495]

I think you have it nailed using the stock like a Stockade stock, but for mega darts. Looks pretty good and I'm liking the Mega Series (except for the Centurion!) I love the Mega Hotshock, Cycloneshock and of course, the Mastodon! Wouldn't mind giving a Rotofury a go though. Looks nifty, it gives me some ideas!

[@sebastiansorsa1407]

I like the design. I'm currently trying to come up with a standard issue for a fake nation I've made up. I love the Satedan Rifle from SGA and this has a similar feel to that. This video has given me some ideas. I do want to put a stock on it, maybe something more solid looking, and the more traditional pump action handle certainly looks better than the pistol grip in my opinion. Thanks for helping me further my idea.

[@sammeister6181]

Captain, (Salute!) I know this is an old vid, but this is a blaster that I love and a mod that I think is really cool! Have you done anything else with modularity to this? Would you be willing/able to post a follow-up detailing the cuts/drilling needed to the Cyclone Shock slide to make this mod happen? Or maybe for a Double Breach priming handle (that blaster's best ergonomic feature)?

[@CaptainXavier]

I have not done anything new to it since this video. And the cuts were fairly self evident. There is really only one way to make it fit.

[@galiojusticejustice3191]

I would like to voice some ideas for your mini gun: -Make it modular so that there are multiple blasters that can hook up to the backpack. -Make it so there is an option to hook up two blasters at once, for instance OutOfDarts’s HIRminis, so you can dual wield with a ridiculous capacity. -Make the end of the hose an emptied out rival 7 round mag so that you could realistically stick it in any Rival or Dart Zone Ballistics blaster

[@CaptainXavier]

+Randal The Vandal Good ideas. The hose already is modular (for that very reason). I have plans for the HIRminis. It would take more than that to work with any blaster but that woyld be a good start. Yoy would also need a swtich to turn one the tank, but that would be really easy to add! Thanks!

[@Bio-Glowy]

You could put the doublebreach dart holder on the stock

[@guilianosciarrotta6696]

EVERYTHING MUST BE MODULAR!

[@viktornapolitano6113]

Agreed.

[@gunnarradtke9372]

you should have a spectre folding stock with darts on one side for this gun, of course you will need to strengthen it a little bit, but that is pretty easy.

[@bctwinkletoes977]

You should use the nerf thunder bow ar system as the dart holders

[@joshua5483]

This reminds me of the modular rotofury. Still love that thing!

[@kmieciu9718]

Congratulations on being THE FIRST NERFER THAT GOT ON TV!!!

[@CaptainXavier]

I'm pretty sure I'm not...but thanks! :D

[@kmieciu9718]

Captain Xavier I think that is true😁😎

[@Amiga3000D]

When you us screws for new things that aren't original to the balster, in this case the stock adapter, do you have to reinforce the shell in that area? Do you use sheet metal style screws (pointed ends that are self tapping) or do you use machine screws (like the normal shell screws) with a nut?

[@CaptainXavier]

+Karl Vogelheim i just use regular nerf screws and just screw into the tue shell.

[@omarrojas3928]

Double breach kind of thing so it looks like a sick shot gun

[@mattvonnerf3495]

The Mega Twinshock looks cool anyway, I was thinking of maybe attaching a SPAS-12 style, over-the-top folding stock. Dunno where I could get a similar stock, but it seems completely plausible, if not functional and cool (in my swirling miasma of scintillating thoughts and turgid ideas). I'd rather have an angled foregrip on my Roughcut though. I might have to get some Lightake darts to try.

[@joshua5483]

I might do that cyclone shock grip thing for my revonix 360 ( I hope you got yours back)

[@jarnohes287]

Joshua Greig i tought Your profile pic was deadpools but

[@darrenjacobson7456]

That pump grip seems to hang very low, looks a bit funny to me. Also, could just be perspective but the stock looks to be tilted upward slightly.

[@CaptainXavier]

I agree. I would like it to be a bit more streamlined. It lines up with the bottom of the lowest barrel though so it is not bad. It is on my list of things to try to 3D print once I learn to make my own files...I just started learning...I have a lot to learn.

[@markfacebook]

Would love to see what the Twinshock would look like with a centurion stock integrated into it.

[@joeloneill7137]

You could use your modular stampede mega stock

[@CaptainXavier]

It only holds 4 darts. I wanted 10. But I had complete forgotten about it. XD

[@andrewgaughen9310]

Andy idea of the new 2.0 Artemis stock attachment would be able to be attached, similar to this? I'm looking to add an attachment point to a MEGA Rotofury.

[@CaptainXavier]

Yes, with some modifications.

[@andrewgaughen9310]

@@CaptainXavier Thank you. The size of the piece should matter, as there's plenty of real estate on the butt of the Rotofury. Are you thinking the attatchment piece itself would need modding? Perhaps different place to put in screws to reinforce?

[@TheLaurapalumbo]

Would it be possible to make the buzzbee predator magazine fed? Where the mag comes out the side? If so how difficult and would it be possible to use a mediator magazine well?

[@colorpunk7522]

Hi qustion i just got one of these was wondering how far back the white plastic bar the spring is on goes back as i want to put a battery pack in the back were a stock would go thanks.

[@thewanderer3041]

I think the dart holders from the double shot would work

[@jthoma82]

See, I would buy the twin shock if it looked like this. I've always found it to be so ugly but you found a way to make it tacti-cool. Well played Cap, well played

[@raizmond5597]

I piece of the double barrel shotgun has a holder for mega bullets

[@gergero7427]

i wonder if there's a way to do "accustrike" mega darts

[@Fireball21482]

On the priming handle that you use from the cyclone shock I saw the writing of the cycle and truck are you going to send that off?

[@CaptainXavier]

Nope

[@calebsmith4255]

Do you think it would be practical to replace the cylinder of a maverick with a Vulcan belt feeder?

[@WooperChannelYT]

Caleb Smith yes! That’s op!

[@calebsmith4255]

I was asked this earlier today and I replied that with enough epoxy anything is possible. The problem is that I don’t have a maverick or a Vulcan

[@WooperChannelYT]

Caleb Smith aww... well sorry about that, it’s possible tho! With anything actually

[@CaptainXavier]

+Caleb Smith not only is 8t possible. It has already been done.

[@WooperChannelYT]

Where? I️ really want to see!

[@gamerguy425]

the modulus storage stock is like a mailbox basically but it's only long enough to fit elites. I think you could fit a handful of them vertically but it would probably not be worth it

[@imjustariceguy]

It disturbs me that the pump grip is backwards.

[@thewanderer3041]

Beautiful

[@timburke2820]

so a few questions on this; Firstly, for your cycloneshock foregrip, did you add any fill to it or did the screwholes line up that well? and Secondly, with the proliferation of Mega Accufakes & the new Mega Accustrikes coming out soon, any thoughts to going back for additional range tests & chroneys?

[@CaptainXavier]

No infill and I and did use this in my accufake video, didn't I?

[@timburke2820]

I'll hafta go check, been a while since I watched that one ^_^

[@timburke2820]

just checked it, you did fire this with the Mega Accufakes, I was mostly wondering if you'd do it as a comparison of Accufake to Accustrike though.

[@CaptainXavier]

oooooh, I don't have any yet but when I get some I will probably compare them, yes.

[@yeetkid6978]

Im captain Xavier and I LOVE ALL THING MODULAR!!!!!!!!!!!!!!!!

[@cherrywolf759]

maybe some jumbo sized makers to make dart holders it works well for elites

[@KoolKyurem25]

Can you make a semi auto Magnus? Where the trigger pull primes and shoots in one motion, even if it isn't that strong. It'd be awesome since the Magnus looks like a large caliber tactical pistol.

[@CaptainXavier]

I don't think so. Not without some extreme hi tech parts.

[@shdarmor2736]

Good day sir how are you doing captain and also do you think I could rebarrel a mega blaster with buzzbee shells I have no Idea if it will even fit a shell

[@CaptainXavier]

I have no idea...worth a try

[@shdarmor2736]

Captain Xavier also I’m pretty sure you made a mega shell holder using a 12 gauge holder and a retaliator stock I believe it was on a stryfe

[@shdarmor2736]

Captain Xavier it was actually on the modulus stampede

[@slimebuck]

honestly, the twinshock should have been like this STOCK. Nerf should hire you. When they make a prototype they send it to you to make it more modular, then you send it back and that becomes the base blaster

[@oliverlp9719]

0:15 it's not too often you get all this neatness in one location

[@0ptimusv0ltr0n]

Possibly a dumb question but how hard would it be to print a barrel insert so the lightake stickies fit better? I know nothing about 3D printers so I'm curious if that would improve their performance.

[@CaptainXavier]

+0ptimusv0ltr0n I don't think my printers can print that thin

[@0ptimusv0ltr0n]

Captain Xavier thanks for responding I plan on saving up for a printer in the future just need life to take it easy on me!

[@MinichaudBerkimilov]

I want a break action twinshock with that shoot 4 dart SHELL, and with a stagered trigger so you can either shoot 2+2 or 4 darts at once

[@MinichaudBerkimilov]

But i know this is way over complicated and probably not possible, but i love the shelle of the twinshock

[@CaptainXavier]

It is a lovely shell

[@juliannededrick163]

Hey does anybody know how rare a buzz bee Overlord is and where to get a chain for one?

[@CaptainXavier]

No idea on either point. Sorry. :(

[@whoshotyah9977]

I love the intro

[@derlycordova6325]

hey Captain you should try to make the rapidstrike stock modular

[@andyhutchinson1806]

If you have one, put a scravenger stock it would be the perfect length and also have a double jolt

[@jonesytime8438]

I love the new intro captain it’s very well you. Love the new vids keep up the amazing work and as always take care and see you in the next videooooooo. (Sorry not sorry)

[@MrRomeo8869]

Tell light take to make ya some "mega accustrike darts" (mega caliber with accustrike tips) help get those ranges/accuracy numbers up! >_

[@bike_rider-k2h]

If accufakes/accustrikes are anything to go by the range would be decreased but it should have better accuracy.

[@xathomir]

These are coming out at toyfair

[@ronin_84x33]

nerf is releasing mega accustrike darts with the thunderhawk

[@jonatevproductions4258]

Totally radical my dude.

[@justinmacd4499]

@Captainxavier Hey I was wondering about your deadpool kronos mod from a while back, do you think there's a way to mount the mag vertically instead of horizontally?

[@mrkagen1986]

Justin Macd I thinking about that for a while now

[@CaptainXavier]

+Brian Evans maybe? But remember the internal magazine moves as you prime it. Making that very dodgy.

[@justinmacd4499]

Captain Xavier thanks for the reply, and if you ever pull it off I'll have to try too lol. Also have you seen the 3D printed parts for the kronos that are like the strong arm priming hooks?

[@mrkagen1986]

Captain Xavier No I have not but Very interesting when I get the extra money I'm going to try it somehow need to get my hands on the seven round mag first

[@CaptainXavier]

I have seen the hooks. I suspect they would not work with a k26's Kronos. They are hard to prime just by hand. But I have not tried them so I could be wrong.

[@michaelking8483]

Have you or are you going to put those extra ammo holders on the blaster

[@tacforcedonut8337]

Hey captain X is it possible to put a stock attachment on the brainsaw and if so would you make a video on so i can add one

[@CaptainXavier]

With enough epoxy and screws it is possible to add a stock attachment to point to anything. :P

[@tacforcedonut8337]

So how much epoxy would i need and what length screws

[@CaptainXavier]

No idea, I would have to actually try it.

[@kyleisaho-chunk8040]

Id love to see a Lever action twinshock captain X

[@CaptainXavier]

hmmmm...that is a really long draw to try to put a lever on...but it should be possible...but I would need a machine shop...which I don't have. :(

[@kyleisaho-chunk8040]

Alfredo Rodriguez the twinshock is just a mega roughcut

[@hyperzach9054]

Mega double breach comes with a quad mega bullet holder

[@lukeharmon261]

Are you ever going to continue the lancer

[@hazard4349]

Could use a mega accustrike harmonica clip

[@connorgibson8837]

Love it captain, reminds me of the tactical shot gun from fortnite

[@roll4critgaming841]

Why not use a couple of double breech dart holders? I believe they hold 10 each side.

[@CaptainXavier]

+Critical Vape because I don't own a double breach and of I did and I did that...how would I hold darts to my double breaches?

[@roll4critgaming841]

Captain Xavier yeah very true. I kind of commented before finishing the entire video. Your solution was much better thought out than mine haha.

[@zacharya7188]

Do you know where I can get a stryfe cheap please and thank you And love your videos

[@TheCatpirate]

Zachary A Toys R Us has them for $25. Also check Amazon.

[@stinkyfartguyofficial]

i know toys r us used to have them kind of cheap, around 20 bucks

[@derlycordova6325]

try getting one in a thrift shop if you try hard enough

[@zacharya7188]

Thanks to all

[@k.l.sp.1816]

The storagestock can hold megadarts

[@CaptainXavier]

Good to know! Thanks!

[@rh3353]

You’re awesome 😎

[@djaydeved]

heres a idea a firestrike with a attachment rail on it basicly cut a blaster down (firestrike) and build a push button trigger and use it as a fore grip or a angled foregrip

[@djaydeved]

so basicly a underslung flat gun that can detatch for an extra shot that is not a pistol grip syle and can be used as a priming handle

[@MythicBricks]

Do you have a Hammershot stock video?

[@CaptainXavier]

Yes

[@CaptainXavier]

It is called "Hammershot Carbine"

[@MythicBricks]

Wow! Thank you for replying. It means a lot to me! Your channel is one of the ones that have influenced me to make my own. I will definitely check out the Hammershot Carbine video! Your loyal subscriber, Gotta Nerf

[@deeeeeee5515]

But can it have a tac barrel...

[@fletcherclausen4349]

you made a mega storage stock it was you minimized stamped

[@CaptainXavier]

It took me a second to understand what you meant! You are correct! Well remembered! I didn't even remember that! That stock does have Mega storage but it only holds 4 and I wanted 10.

[@jetaviator158]

Hey cap I have a question. Could you use rival magazines as a quick speed loader for the nemesis even though it is not a lot of amo it could still work possibly? Also keep up the great work and modularity!

[@CaptainXavier]

Yes, you could

[@jetaviator158]

Captain Xavier thanks and great video :D

[@wapiti3895]

why is there a chronograph test if it is stock with just a stock attachment and pump grip replacement ?

[@CaptainXavier]

+Wapiti because it is not stock...it has k26 in it...

[@wapiti3895]

Oh I missed this one, sorry for the goof o_o

[@CaptainXavier]

No worries, I think I edited out the part where I mention it...