Car Dismantler Powerhand VRS (Vehicle Recycling System)

The future of vehicle dismantling
Increase profitability by using the VRS to quickly remove higher grade materials such as engine/transmission assemblies, axle/suspension components and copper wiring loom.
The Powerhand VRS is the ultimate combination of power and dexterity. The slender design, plier-like grapple, creates a straight line of sight from the operator to the vehicle, making wire extraction from the tightest of spaces an effortless task.
The VRS is built to work all day, every day.
Maximise profits from ELVs by using Powerhand's VRS car dismantler

[@2pidtoo]

This operator is so good that I'm surprised there's not a separate pile for wiper blades.

[@shedtime2454]

@2pidtoo, Now that was clever and funny, but also true

[@petetimbrell3527]

Yup. He can probably separate fuses into 3A, 5A, 10A and 25A piles.

[@JombieMann]

He probably has a pile for change that he finds under the seats.

[@petetimbrell3527]

@@JombieMann Lol. Good one.

[@kimifan06]

the comments are making me crack up

[@darrenberkey7017]

The way it is able to pull the car apart so effortlessly is both satisfying and a bit frightening.

[@Jagabot_Esq.]

Like watching a sci-fi flick with scary robots.

[@hughdismuke4703]

I get what you mean. Yeah.

[@chaoeperry]

Yeah it looks like its eating crab

[@TesserId]

I want a video game of this.

[@TesserId]

The sound of crunching, tearing sheet metal is only a little terrifying.

[@jamesb1221222]

The way he so delicately separated the wiper motor from everything else was pretty impressive

[@Quizack]

The skill required to make a 20-30 ton insect look like an extension of your own hand is insane. The operator has the dexterity of a surgeon.

[@robertthrailkill1368]

That was definitely the fastest engine removal I have ever seen.

[@fedcruise5037]

🤣🤣

[@jvon3885]

You haven been to a shitty mechanic shop then.

[@pe3117]

🤣

[@TN_AU]

I gotta have a chat to my mechanic, he charged me 8 hours labour to remove my engine.

[@jongrimm7767]

I watched a guy at a local yard pick the car up by the engine, then shake the car off the engine, like a dog worrying at a rope.

[@IronBridge1781]

He controls it all so smoothly that It’s like watching an animal pick over a carcass.

[@agoogleaccount2861]

Like a big mechanical camel spider

[@Rathbone_fan_account]

Horizon Zero Dawn vibes

[@dannydaw59]

It looks like a fun job.

[@harambetidepod1451]

What's the matter kid never have lamb chops?

[@andhewonders]

Makes you wonder why all the hype about Transformers.

[@jondoe6926]

All those memories...shed a tear for you Mr. Car.

[@crabman4736]

I can’t believe they are grinding up perfectly good cars, I would’ve driven any one of those

[@senseibullish1803]

The skill of the machine operator should not be overlooked. He/she definitely is a talented professional with that machine.

[@SusanAmberBruce]

The skill of the machine operator can not be overlooked, I was thinking if only he had a machine built specifically for the job, I get the impression the machine is a general purpose machine that's been adapted.

[@j.a.r.family2576]

It's prolly the only job he's had. Plus anyone that is an operator can literally do this job this is easy. excavating and grading and moving earth is much more complicated. This is just a slow calculated job .

[@tobereed]

I bet he has a cigarette dangling from his lip

[@biguprochester]

Dude can pick your teeth with that rig.

[@jennifurzoe1302]

It's his/her first day on the job.

[@yurisendrew]

The little forks on each side being used to strip components from wiring is pretty neat

[@TeamLas3r]

My fav part aswell

[@snypa-ck7hn]

yeah i enjoyed seeing him use it there at the end :)

[@diogenes1815]

There goes someone’s hard won dream car, such a sad day and damning testament to our culture of disposability.

[@AwesomeNuke]

​@Diogenes yes, I'm sure they do that with operational and functional cars. Of course

[@kenwittlief255]

You need an Engine Control Module for a 2020 BMW? hold on... just a sec... here you go!

[@rccc974]

That was the most considerate dismantling ever. I still cannot believe that that was not done just for the one show.

[@stephenhunt6253]

Operating this thing would be such great therapy for retired mechanics.

[@cmonkey63]

"It doesn't look good, sir. We may have to pull the engine." "How long will that take?" "Oh, about 5 seconds."

[@Regis_Comerlatto]

Meu sobrinho de 10 anos gostou muito do teu comentário!!!

[@chapiit08]

That car was dismantled with almost as much care as it was put together at the factory.

[@Tuck343]

I have one of those, so true... Hopefully mine has a solid 110 hp gas engine

[@Mookaron]

🤣💀

[@mattt198654321]

I would say more. The operator plays this thing like a fine instrument.

[@Elaba_]

Getup aah.

[@valeforedark]

I like the way he's like "fuck the radiator" lol

[@kellynkarr6270]

The crunching noises are so wonderful. The operator’s dexterity is freaking wild!

[@andrewnguyen6648]

Anyone else out there give their cars a soul and found this heart wrenching to watch?😢 Glad it’s being recycled though!

[@peanuts2105]

The sheer power and dexterity of the machine is incredible

[@johndejure9849]

Great work, however i will decline yer offer of a full valet!

[@dawsongranger4940]

The power of hydraulics

[@heathb4319]

@@dawsongranger4940 ...The power of hydraulics The precision of machining The strength of metallurgy The design and understanding of it all.

[@ChaNnArD-mD]

Stupid machine, It took my job!

[@FS2K4Pilot]

I liked seeing it simply rip out the entire engine and transmission.

[@randomrebuilds]

Breaks my heart seeing these vehicles get ripped apart prior to recycling. Someone, somewhere took pride in that vehicle bringing it home from the dealership and creating a life with it taking them to various destinations.

[@ctg6734]

As someone who really enjoys their cars, I hate seein them get destroyed as well.

[@Rapscallion2009]

Same here. Few new parts, bit of servicing, that car could be good for years. But it's less valuable than the cost of repair. So...

[@TomatoTomato911]

​@@Rapscallion2009 how would car makers sell new cars and make more money? how would banks give out more loans to service? how would government collect more tax?

[@LorikQuinn]

I understand crushing the metal is part of the process, but you would think that they would at least remove some parts, like the windshield and windows, seats, headlights etc to maybe sell them as replacement parts. idk if that's a logistical nightmare, but it doesn't seem efficient.

[@randomrebuilds]

@@LorikQuinn there’s a high tech place in Europe that does that. Basically just the shell is left over for recycling while the other parts are inventoried and sold to repair shops. Usually depends on how new the vehicle is too.

[@ThePizzaGoblin]

Its kind of insane how good this guy is. Hes so precise

[@darrinpennington]

Displayed a lot of finesse picking out those individual modules. I'm in my mid 50's and still mesmerized watching these machines

[@leokimvideo]

I always knew having just two engine mounts was never a good idea

[@randylahey2242]

Yea the tens of millions of cars with only two motor mounts all spontaneously combusted:( so sad:((

[@antreaskonstantinou8585]

I agree, who knows when a giant dismantler attacks you on your way to mcdonalds?

[@RuLeZ1988]

@@antreaskonstantinou8585 uhm, I guess the engine being dismantled will be the least of your problems. xD

[@TheRealBaDaBingDK]

That's why they have three.

[@tatescholarmorpheus]

that renault has 4 engine mounts lmao

[@jackwarren3080]

DEVASTATED! Perfectly good headlights on that! Clearer than the murky ones on my Clio! Could do with plenty more spares off it too I’m sure.

[@TheKitMurkit]

It's so stupid, perfectly usable spare parts just go to bin...

[@jackwarren3080]

Quicker and easier to make money this way 3 years ago I suppose. Not anymore surely considering the price of secondhand cars. That French steel just does not rust either. Surprisingly durable car.

[@MrTurbo_]

I mean if they don't even try to salvage parts, that kinda sucks indeed, if they put it on a scrap yard and nobody came to buy the parts, i mean can you blame them, it's usually not worth it to send old 2nd hand parts across the world unless they are really rare and no longer produced, but these headlights you can still buy on the aftermarket

[@VWRGTI]

@@MrTurbo_ I'd love to say my opinion from a 3rd world country, what happens is our currency is so weak, taxes are so high, the aftermarket new parts are more expensive than the imported scrap parts like in the video, scrap cars are almost tax free, so you get a decent OEM parts with cheaper prices, we benefit from almost everything, you definitely can't buy a new aftermarket full dashboard or even ac vents for an old car like this.

[@JN-qj9gf]

Old Clios are meant to die gloriously in a rallying crash.

[@xbrito3368]

when you job is operating this machine - you just know your going to have a great day at work, and never have a day off sick

[@Cokie907]

I was waiting for him to pluck out the rear seat and look for loose change, jewelry, wallets etc.

[@Mookaron]

🤣💀

[@praimchandplays3257]

😂😂😂

[@miamicakes1830]

What happened to the car is sickening. Pure sadism. Should be outlawed.

[@Alal-cz8hg]

Lmaooo

[@Cokie907]

@@miamicakes1830 HAHAHAHA! Take a Xanax will ya? 😂

[@dealerovski82]

that was once somebody's new car and sunshine in their day.

[@joeshmoe9978]

That cost thousands 😟

[@saidiratibu6124]

@@joeshmoe9978 hello

[@037cwash]

Even had a sunroof...

[@tomrogers9467]

Same can be said for weddings!

[@Naughty_Squad]

And it went to places and was somebody's love and joy

[@Ang3r87]

This was impressive. Great operator, great tools.

[@potatoface01]

I hope the amateurs from Baxenden car breakers are watching this video.... this is a tidy yard and an expert operator 😮😮

[@darmichar73]

Amazing operator. At one point I thought he was going to pull the documents out of the glove box and set them aside.

[@arthurthorne3664]

That is fairly brutal... I could not help feeling a bit sorry for that little car while it was being torn apart!

[@DavidNightjet]

I'm not

[@Schregger]

Pretty sure that the junkyard part from "Brave Little Toaster" would have resulted in actual nightmares for children if this thing was in the movie.

[@brettsedlock632]

just a creature feasting in its natural habitat

[@Litanic]

It's French! This is the most fun you can get out of it -*laughs maniacally*

[@roadhog6]

@@Litanicoh I see … and what do you think of German cars then ?

[@charlesclement383]

Someone once cared so much for that car .They we so joyous the day they brought it home brand new.

[@ariadneschild8460]

It's like watching a mechabird pick its prey apart. What a machine.

[@joshhopper6109]

This was mesmerizing trying to discern some of the parts he was ripping out of there to salvage. The operators not only gifted at running the machine but he also has to know car mechanics quite well.

[@Mr._Steal_Your_Squirrel]

Mesmerizing is the right word. Someone, somewhere said "you know what we really need?" Then this beauty was born. 😅

[@netts2315]

Basic car component knowledge is needed. You just need to know all the different systems a car has, engine and transmission, suspension, frame, ABS pump, AC system, cooling system etc. All in all it doesn't take huge amount of knowledge of cars.

[@Kyle_402]

Bet you he wins a stuffed animal from the claw machine every time!

[@bleezair]

He is the claw 😂

[@nickh7777]

It's not all that impressive actually...the tools doin all the work, and that's the perfect tool for the job

[@plupkination]

LMAO!

[@suavomcbravo679]

Excellent

[@Ruinskiy]

Там обман

[@itz_lexiii_]

I thought they were good until i saw them pulling individual wiring harnesses out of the car. Then i was convinced they are one of the best!

[@ryanbarry7670]

0:30 the sounds of those tracks moving has some serious Fred Flintstone vibes 😂

[@Fasteroid]

Most machines I've seen either very precise or very strong, but not both. Seeing an exception to this is pretty cool. Beautiful work on the part of the operator too-he didn't just operate this monster-he _became_ it.

[@TheyForcedMyHandLE]

I guess that depends on your definition of precise and strong.

[@jamescornflake1542]

I bet you really hoped to grow up to be a movie critic)))))

[@shelbyseelbach9568]

Not much experience with machinery, huh?

[@richard-mai]

DMG MORI cnc lathes

[@Fasteroid]

​@@TheyForcedMyHandLE ​ When I say "precise", I mean unreasonably precise, like how a CNC machine can get tolerances of thousandths of an inch on parts that might be a few feet wide at their biggest. It's the range of orders of magnitude that counts. When I say "strong" I mean something which can exhibit continuous and brutish amounts of force, like a hydraulic press or those massive "shred anything" machines.

[@dubahdee146]

The operator of this machine has true dexterity skills. Highly impressive. I really enjoyed watching this. The way tiny pieces were plucked from the car was amazing. If I was there watching I would have given the operator a standing ovation!

[@samueldavis5895]

Lol. You could do it too. It’s called a job. I’m certain that most pro gamers could do this with a little practice.

[@keithclark486]

Crackheads enjoying tearing up shit' crackheads like and also like watching others pluck tiny pieces of shit off perfectly working items ' especially cellphones. I'm surprised you're able to watch this video.

[@AxeDragon1989]

@@samueldavis5895 you have to have some patience though! I'd want to just destroy the car real quick

[@samueldavis5895]

@@AxeDragon1989 🤣. Got you. I suppose many would.

[@BlueZirnitra]

​@@samueldavis5895 yeah, this is why we call them "skilled workers". There are millions of jobs out there that require training and practice but once you've done it for years it seems easy. That's what "pro" means.

[@liamx6636]

I used to live a few hundred feet from a wrecking yard. I would walk my very young son there to watch the employees tearing apart old cars. He loved every second of it.

[@BraindeadCRY]

I have never operated an excavator or similar, yet Im still pretty certain that this mans skill and dexterity is well above average

[@notme8121]

It's a lot easier than you may think.

[@leewolf6434]

The combination of speed, precision and ruthlessness is astounding!

[@bhtl86]

As a Clio II owner (but with more 2 doors and a even more underpowered engine) it makes me sad to see such a useful car that can be repaired and sold (almost free 🙁) to young people who just want their first car to start driving or people who just want a cheap commuter car being torn apart 😢

[@claudiodiaz9752]

If properly dismantled, that car could supply hundreds of good parts to keep other cars running as well. Such disgusting waste. I had a clio II as well, loved that car and never had any major issue with it.

[@TeflonTyson]

Exactly! You can't tell me that's "extracting maximum value" Plenty of good parts if not restorable at the very least.

[@williamthompson1455]

​@@TeflonTyson eh it's cheaper in alot of Cases to build a whole new part than repair one. Labor costs are a thing. And they need to be paid decent tbh

[@whydoyouwantmyname5857]

If it’s in the rust belt, lots of times the body will rust out where the subframes connect and it’s game over.

[@michaelcliffe562]

​@@whydoyouwantmyname5857 This is in the UK. No rust belt and no salt.

[@ulose2piranha]

That was 8 minutes and 14 seconds of my life well-spent.

[@barrettpickett5603]

The pin precision was amazing. And had ripped the inside for further processing. Still the memories of the car to make new cars.

[@nbagoats4819]

The way it yanked that engine out of that bay area just amazed me. That was incredibly.

[@graytoby1]

That's how they often replace your spark plugs at kwikfit and then tell your cars fucked and its gonna cost you more

[@coloradostrong]

Incredibly _what?_

[@brentbradley6711]

YEAH, ALMOST SCARY

[@TheKitMurkit]

Super sad though

[@ThisHandleFeatureIsStupid]

That was incredibly... what?! I NEED CLOSURE ON THAT SENTENCE, DAMNIT! 🤬

[@georgebenson6279]

Man's pulling out cables 😳 that's some skills right there .

[@bill3098]

I bet he could pick your teeth with that thing. 😂

[@billgriffiths1685]

It's like watching a giant bird feeding on a dead animal.

[@phaslow4393]

Reminds me of my last marriage...

[@billgriffiths1685]

@@phaslow4393 sorry mate but you made me ask, How and why?

[@phaslow4393]

@@billgriffiths1685 How? Like the operator. Destroying you systematically with surgical precision only to be crushed and thrown away. Why? I still don't know the answer to that one. It was a long time ago.

[@paulwright9106]

All uninsured , old with no mot vehicles should meet this machine , as well as whatever that car was recycled for . Might have been a good idea to remove the reg though first . Brilliant recycling and operator .

[@jbob1399]

Always a pleasure to watch a skilled workman at his profession.

[@anthony5227]

This is one of those videos that comes up on my feed randomly, and now I’m obsessed with scrap car dismantling

[@Aviritius]

It's a little bit sad. I mean there are a lot of things that could have been used as the body parts like front lights, windshield, side glass, some external body parts etc. From the other side - awesome work!

[@mikko3]

There are million Clios, you dont need thousands of Clio doors

[@Hobinator17]

Do you know how difficult it is to be a parts dealer and deal with that constant stream of morons looking for crap? And the space you need just for storage of those vehicles. More cost effective to scrap and melt the metal down

[@Scyllx]

This video is pure bullshit, when you pretend to "recycle" you never throw away a lot of parts that was on that car, and mixed metal and plastic yeah great for recycling

[@cozmium]

Just because there are lots of Clios doesn't mean that this and other breakers don't give a shit about older car parts and relentlessly scrap them - it's easier to process scrap than sell parts, even though it makes more money. This video might show a common Clio, but this is happen to every car that goes there - even rarer ones.

[@Britishfurryrectifiersucker]

@@Hobinator17 “constant stream of morons looking for crap” proves you don’t have and haven’t ever had a hobby or passion

[@Exodia1986Necross]

WoW , he even has opened the glove box and took out the sunglasses and recycled them away. 👏🏼👏🏼👏🏼

[@229glock]

Ok, I’m 53 and just decided that I want to do THIS for a living.

[@rooh5825]

I used this machine to do an engine swap. On the plus side, super fast, fastest swap we've ever done by more than 4 hours. On the down side, we had some issues with the wiring harness.

[@BaldMancTwat]

I can't tell if this is a joke or not, but either way it made me laugh. It's a bit like saying you put the milk back in the fridge using a forklift.

[@BillionPlusOne]

I think I saw a few wiring harnesses in that other container, you might find just the part you need over there!

[@kenwittlief255]

so the machine has a REVERSE button?

[@csjames69]

Once upon a time, that car was someone's pride and joy as they drove it off the new car dealership. Reduced to scrap.

[@spdzodzo]

it was wrong-hand drive anyway

[@fiveohgod]

Couldn't be proud of an econobox

[@bernardotruba1718]

@@spdzodzo at least "wrong hand drive" done Brexit.

[@nomyafiftyonefifty8081]

Took them on holidays and to family get togethers etc. We used one of ours as one of our wedding cars and one of our other cars our daughter was born in station wagon area now both are scrap metal.

[@H3Y023]

It will be made into a more crappier car

[@Tonto-ih5ou]

yeah this piece of specialised kit is just a clamp really its the operator has some real skill and patience to do this a true master of his craft

[@theoneed2051]

When I see this, it reminds me of the ingenuity of human beings. The big and heavy machinery/tools we've been able to make for ourselves. Pretty cool stuff!

[@xfloodcasual8124]

the ingenuity of building a lot of crap, working hard to buy all the crap, then having to dismantle all the crap.

[@tymz-r-achangin]

Thanks for the video! There was no stupid music covering up the actual sounds of the machinery and processes, and you even gave the 2 different cameras views of the car being mutilated :)

[@realitytx]

an audio commentary explaining each removal piece would be very interesting

[@t6finch]

Poor little Clio. Sad to see it torn to bits. (I have a Clio 200 and a Clio V6 so I clearly like them!)

[@williamgrissom1995]

That's all? I wanted to see it performed on other vehicle types too. That was very cool. Mostly predictable. But there were two things, at least, too tiny for me to see what they were. I was very interested in this, because I've never seen this helping "hand" before. Very cool and a great video. 😎👍

[@englishincontext4025]

It's like watching a praying mantis dissect its meal. The accuracy of this huge machine is incredible. Just loved the way the operator removed the bits of plastic ganging off the wires, near the end.

[@user-uk6xu2yi7e]

Ваш контрактный двигатель пришёл. Можете забирать.))))

[@user-wl4zk8zh6l]

адрес???

[@sphairon]

А навесное на месте?)

[@user-lq7dr2sm6u]

Разбирали в ручную

[@oldbaldguy6151]

Having never seen a vehicle being dismantled, I found that quite educational! 👍👍

[@benoit-pierredemaine3824]

In France its obligatory since 10 or 20 years. And what you see here would not be allowed In France. Here the wheels had been removed previously, but I saw oil jump, and fregerirant liquid . All these polluting liquids must be removed gently before the engine is teared out. Note there are several oil circuits. They probably had emptied the main engine oil reservoir, but I saw clearly the break oil reservoir explode and leak. You also must purge the steering wheel oil, and gear box. Cooling water is the only non polluting liquid ( not to be confused with cooling liquid for air cond ). The man is skilled, but I wonder which country still tolerates spilling all liquids everywhere.

[@netts2315]

@@benoit-pierredemaine3824 Maybe there was a drain underneath. It's not unheard of to have leftover fluids in the system even if emptied.

[@jaipaulsethi6880]

The precision of this operator is amaxing

[@canadianpatriot2891]

As a fellow machine operator, you sir have my respect 🫡👍🏻

[@kma4444]

I worked at a Honda repair shop for a couple of years. I would have LOVED to have one of these. Would have made things much more satisfying.

[@bernardotruba1718]

I thought it was Renault Clio...

[@chriscatarcio2186]

I felt ur pain.

[@kdmc40]

I was looking at another upload a while back. It was mid 70's. We were noting all the cars from the 60's and 70' that are now classics being crushed with what seemed to have nothing much wrong with them. I supose well be looking at these current uploads in 30 years time and wonder at all the classic cars being ripped to bits!

[@semperparatus3685]

Standing ovation for the operator! Just Wow!

[@mcspikes1]

He was a very skilled operator but the whole process seems way too slow to be economically practical.

[@bridgetstoli2347]

The sooner sorted the better.

[@guahanbassoutlaw5081]

@Michael @6sheds is right...for now, this IS the fastest & best way to separate & sort out all the parts for scrap & recycle. If it was man power, FORGET IT! close up shop!...if it's by mauling the entire thing,...guess who's gonna go through all that mess sorting it all out again?🙎🏻‍♂️ it'll take days maybe weeks just to do all that. Let's enjoy this fancy claw on the excavator for now till we have someone from the University of Recycled Scrap come up with a better idea. Unless you have one to pitch?

[@jonpaul9514]

@@guahanbassoutlaw5081 lol I was about to say the same thing, look how fast he just ripped that engine clean out haha

[@1lefty123]

I was thinking the same thing. How much fuel burned while removing a wiring harness. That thing is not fuel efficient I am sure. Was cool for the first 2 mins than Im like crush the friggin car!!

[@sergeybebenin]

@@1lefty123 I'm sure it's still less fuel than mining that copper

[@Atmos_Glitch]

I love how the car just crumbles almost as if it's made out of a thin film of plastic that's has hardened over and disintegrates with the slightest touch upon it, making you forget that this car is made out of metal.

[@leeevans261]

He is so efficient one of the best I have seen

[@Elumnix]

I've done this for work on and off at my old job, it's quite therapeutic when your having a bad day 🤣🤣

[@07negative56]

I’d like to take this piece of equipment to congress while in session.

[@MrNastytrucker44]

The only piece of machinery you would need to fix congress is a meat grinder

[@vistakay]

​@@MrNastytrucker44 pump the building full of carbon monoxide

[@vistakay]

​@@MrNastytrucker44 pump the building full of carbon monoxide

[@bingbing-ti2rv]

Damn the precision of the operator + the force of those hydraulic cylinders, i knew bulldozers have a huuuge force, but i would not have though a second that it would be able to crush an entire car flat just using the hydraulic mount, i thought they'd need to run over the car crushing it under the tracks, but nope, just flattening it using hydraulic power, not even the weight of the machine. That is some crazy force right here

[@Ixionos]

That machine operator has mad skillz. He could easily play Operation with that machine without touching the sides.

[@boxhawk5070]

Seems like such an undignified way to go.

[@saucewrld9995]

This is kind of incredible how easy it just goes in there and rips out whatever with ease.

[@Namdor2012]

Waiting for the head to swing around and feed baby crushers...🐣

[@jakecole7447]

being a car mechanic and knowing how bad some of these things come off if you want them in one piece - its amazing to see how lightfooted the excavator takes everything like its a paper towel.

[@lazarusblackwell6988]

Very powerful machine. Impressive.

[@TheMichaelBeck]

That operator has mad skills. I've know some people that I'd greatly enjoy doing that to their car. Cheers from America!

[@danielcalvo9063]

This is so cool! I would actually enjoy watching more of this content, its very entertaining to observe how the operator picks apart the scrap!

[@blainenodes8182]

The way things are headed most likely AI will recycle cars/stuff w/ in 10 yrs😞🤯

[@pkpk9513]

As a practising surgeon you got respect.

[@fistpunder]

Yard foreman: Go take that car apart. Equipment operator: OK I'll just start up my tool box.

[@flynn6737]

This is the precise work that only on the job can teach. You Sir are a pro

[@jeffclark5024]

That’s crazy how effortlessly it rips the entire engine and transmission out

[@FureyinHD]

Always find it funny that people send cars to the scrapyard that are nicer than the one I drive

[@pilot3016]

Customer at repair shop: My wife is divorcing me but wishes I find a few issues in her car first. It seems to have a tic in the engine, the wipers don't work, and it needs new CV joints a struts. YES SIR! We understand fully. We will get right on it!

[@phoephoe795]

Seems like an awfully inefficient way of changing the headlight bulb.

[@firebir11]

Another Union Job

[@dragonflyjones5146]

The operator orchestrated a brutal symphony with his machine indeed. 👏🏽

[@miroslavmajer5155]

This guy is so skilled that he could unscrew micro-bolts with that reaper head.

[@joeyealy6060]

that thing is awesome and so is the operator

[@poly_hexamethyl]

It's amazing how easily all those parts come out, if you can just grab them tightly and pull hard enough!

[@Lore-wv5mt]

Hahahhaha

[@hubsonekka]

WOW, He could open my beer holding in my hands.

[@cooliodiablo4571]

That looks like a pretty fun job ngl. Just wreck, and break things all day. I dig it.

[@fireprophetproductions4967]

Looks like such a fun job. You could probably listen to heavy metal in the cab while you tear cars apart.

[@tommillar7273]

It picked that hood off like it was peeling the lid of a yogurt cup.

[@davehenderson3739]

Thats why its called the POWERhand.

[@clivehowarth6375]

Really helpful to show the number plates. Makes cloning so much easier.

[@murphman76]

Gives a whole new meaning to "pick a part".

[@fearlessknight1343]

handling that car and those before it like a ragdoll. Precise pickings!

[@ChrisBLong]

This was probably the most entertainment anyone's ever got from that car.