Car Park Surfacing and Parking Reinforcement With Gridforce

This video demonstrates the installation of Gridforce ground reinforcement grids being used for grass covered car parking area.
Gridforce is a durable, sustainable system that provides strong support to car park surfacing with proper drainage and anti-weed protection. The honeycomb system allows for seeding for normal grass growth, while the 100% recycled grids provide strong support for up to 400 tonnes per square meter.
Installation of this car park surfacing is simple:
A permeable sub-base material is spread and leveled over the chosen area.
Over that sub-base level, a layer of sharp sand is spread and thoroughly compacted to create a flat and level surface for the base of the car park. Coarse sand is the most effective solution at this stage.
Sand can easily be leveled by hand using rakes or (if necessary) it could be screeded.
Once the sub-surface of the car park is prepared and leveled, then Gridforce car park surfacing grids can be laid. Where necessary the grids can be cut to fit into awkward angles or unusual spaces. An angle grinder is usually the best tool for cutting the right shapes. The ground reinforcement grids are interlocked, keeping them firmly and tightly in place as the process continues.
The edges of each grid have tabs on them that neatly interlock with complementary groves on other grids.
The Gridforce system is able to cover a small or large area in a short space of time. The grids are easy to drop and click into place and need minimal effort.
Once the grids are laid they can be settled into place using a vibrating plate compactor.
Once that's complete, you can simply fill the grids with your chosen topsoil and seed with grass.
Discover more about the Gridforce system and how to turn your car park into a sustainable system here - www.gridforce.c...
This video was created as a part of a case study by Paving Expert www.pavingexper...