CAR SMOKING FIXED! 2005 - 2010 CHRYSLER 300 DODGE CHARGER MAGNUM 2.7L V6 VALVE COVER GASKET FIXED!

[@Rawcookez]

Best video. He actually shows you the location. 🔥🔥

[@onemansvideos2134]

I'd replaced the coil over gaskets on the valve cover too while I had it off also..thanks for showing how easy it is

[@jameslove1998]

I usually watch the complete video before i 1. Like 2. Subscribe .. However with this video i had to stop @ 3:10 .. Thank you for the in-depth of the step by step instructions and explanations of the task and tools .. 😉💪🏾

[@froylanmiranda7362]

Thanks for showing, I would go ahead and replace ignition coils, spark plugs, fuel injectors, PCV valve. Seems they only lasts two years. Nice clean 300

[@charlieplop6223]

Thanks for posting. I have an '08 Chrysler 300 LX with a 2.7 as well. I'm thinking about swapping the spark plugs and ignition coils as well since it's already open.

[@charlieplop6223]

Could you post a video about changing out your fluids? Transmission and oil etc.

[@HidalgoMotorsCo]

Hey Charlie! You’re very welcome! Thanks for watching! Really appreciate it! Thanks for the comments! And yeah go ahead! You don’t have to take it apart to swap out your plugs. It’s easy :) and I will definitely post those videos once I get to them! Also! Quick tip about transmission fluid. You don’t want to change out the trans fluid if the car is over 100k miles sometimes it may damage the transmission. Must be careful!

[@tankl.9193]

@@HidalgoMotorsCo Hello ! I have a 5.7 300c 2007 hemi mine not starting it kept running out of anifreeze and begin too smoke under the engine anytime I travel over 55mph! The radio and everything works fine I recently put a alternator on and that wasn't the issue but whatever leaking it's coming from the front right side of my car more like in the middle My car didn't shut off tell I gave someone a boost for 30 minutes then my car shut off and theirs started up 🤦‍♂️ Any idea what the issue was ? Please help!!

[@HidalgoMotorsCo]

China 4Life wow! First of all I would like to say thanks so much for watching! And if it’s smoking... and running out of antifreeze, you have a coolant leak somewhere... you could have an internal problem where coolant gets inside your engine... check the oil and make sure it’s clean. And does not look like chocolate milk! Cause that’s what oil mixed with coolant looks like.. also if it smokes white at the back.. it’s burning coolant. So I would suggest getting it checked out by a mechanic. I don’t think the jumó was the problem.. I just think that your car may have given out at that moment... so my suggestions to you. You do it or have someone Check all the radiator hoses and inspect for leaks and cracks.. check your water pump.. could be leaking.. and if it smokes from the bottom it could be coolant dripping down the exhaust burning off.

[@tankl.9193]

@@HidalgoMotorsCo thank you so much ! God bless your heart ❤️

[@Moe_Lester_fromUptwn]

07 charger rt here. My antifreeze has been bubbling/leaking for about 2 months now, so I've been refilling every 2weeks. So omw to work today, lots of white smoke was emanating from the engine(when driving, it comes out beneath the car too; passenger side i believe)and the temp guage was ALL THE WAY up. I also believe the cap to the coolant reservoir doesn't seal in properly as it kinda jiggles after I close it. The coolant was practically all gone btw. This is stressing me out.

[@neceboo693]

I should watched this before I went to the shop😆

[@KJ-he6hf]

I installed this today on my Dodge Magnum and I'm a girl. It seemed easy but was time consuming. I enjoyed the video and your kind of cute by the way. Thanks for the upload. Question? How long does it take for the gasket to melt or cure into place? I did see a little smoke after but I hope that's from excess oil that leaked when I took the valve covers off.

[@Cam-cq2ei]

I have a 08 charger 2.7 and ima try this because I have the same problem

[@familiamaciasauto6403]

WHY DIDNT YOU CHANGE THE SPARK PLUG TUBE SEALS?

[@adrianhugentobler3318]

great video, i have the crd version 3.0 300c 2008 european import .without giving gad it doesnt smoke but as soon as you do it once it starts badly ,smoking white and like burn rubber does this also work for the diesel version?

[@HidalgoMotorsCo]

If it’s smoking white, it could be a coolant leak. I suggest getting it diagnosed by a professional

[@DjHarrington888]

Have a 07’ Limited. Replaced the battery 3 months ago. FF to a couple weeks ago, the passenger low beam lamp went out. Shortly after the battery LED started appearing. New battery would not hold charge. Jumpers got it started after 10 mins and the coolant overheated. Found that the 1 year old radiator fan(s) would not turn on. Jiggled the harness, fans would start/stop. AAA tow truck driver/tech assumed it was the alternator; makes sense. Had it towed to a trusted local mechanic. Symptoms above were not relayed. Diagnosed the engine seized! Any advice or recommendations would be greatly appreciated! HARDEST YEAR OF MY LIFE!! Thank you in advance.

[@danielv9019]

The intake manifold bolts have a certain pattern to tighten them

[@madisonslade3557]

how did u get it off mine is stuck on dont wanna come off got all 14 bolts loose

[@HidalgoMotorsCo]

Try to hit it with a rubber mallet on each corner. Or if not carefully pry around it with a tool like flat head screwdriver but be very careful

[@kqlon]

I have a 07 Dodge Charger 2.7 and it’s smoking and has no acceleration. idk what to do.

[@armstrongrodriguez3030]

That valve cover you had on the floor , what is that part thats screwed into The back of the valve cover , the rubber hose that looks like a "u" attaches there. Im having a hard time looking for it , do you happen to know what its called . Some kind. Of crankcase breather pvc valve or something , can you or anyone help .

[@thomasnelson213]

I replaced mine yesterday. At O'Reilly it is called a breather hose. It feeds back into the air filter. The one one the passenger side is under the intake thats the true pcv valve

[@HidalgoMotorsCo]

Man sorry for late response! I’m glad someone came through for me and answered your question. Did you ever figure it out?

[@armstrongrodriguez3030]

@@HidalgoMotorsCo so i got the hose that looks like a u shape but i need the little part thats screwed into the back of valve cover , do you know what thats called and where to find it ?

[@thomasnelson213]

@@armstrongrodriguez3030 im sorry I misunderstood your original question. Im not sure of the nave of that but I assume that would be a dealer item. It is simply 1 screw holding it in place. Its worth a ride to a junk yard for that as they wouldn't charge more than a dollar. The dealer will want at least 20 lol

[@jameslove1998]

@@thomasnelson213 its a pcv valve.. Of you get it from advanced auto parts the part number is PCV661