Car Wash Malfunction

[@chrisspickard8017]

Have worked on carwashes for 10 years, tailgates and open trashed beds are a nemesis of mine

[@williamscoufaras7045]

Notice at 3:39 the machine said, "This transaction has been cancelled" after it said, "The wash is currently busy. Please wait."

[@chaoszombie9995]

it actually said "broken"

[@williamscoufaras7045]

@@chaoszombie9995 the machine said more than 1 word when it broke

[@noahharris2260]

He had his tailgate down in his pickup truck that why the wash system like this cause it to shut down

[@tommorris4920]

There are a few Tandem machines around here in South Florida. None of them have lasted all that long because they are very prone to damage from people not using them correctly - most have been replaced with Laserwash or ANCIENT partly refurbished Ryko machines (they work about as well as you'd imagine) I've never seen one with a high pressure overhead sweep. That's kinda cool.

[@Rodj12341]

+Tom Morris I believe all should do that if it is a truck.

[@thegastonsmediaworld1994]

Maybe the guy was lifting a bunch of stuff off at home, he probably forgot to lift up his tailgate and left it down in the car wash by accident.

[@noahharris2260]

He might’ve forgot all about it

[@MrShomesomethin]

You cant use these with the tailgate down. Common sense says empty all debris from your truck bed before entering. These places are not a trash dump.

[@chaoszombie9995]

he didn't close the tail gate

[@noahharris2260]

Same

[@noahharris2260]

If I saw the tailgate down I woulda got out and put his tailgate up

[@noahharris2260]

@@chaoszombie9995that’s why the side brush stopped because his tailgate was not up usually on the pdq touchless or soft touch on the systems hits something on a vehicle it usually shuts down and also drive forward in the dryers come on and sometimes these machines don’t automatically go back to the home position after it shuts off I’ve had the same problem

[@austinmetz4428]

i am also surprised that it didn't attempt to move back. The gas station I work at has a laserwash 360 and if it hits the vehicle, it moves away from the vehicle and tries again at a farther away distance.

[@MrPhonepheth]

SPOILER ALERT The Malfunction Problem: The dude’s tailgate was opened, then got jammed on the tailgate.

[@NicholasNormand]

plus he had a trailer hitch on it which really needs to have the carwash to say no trailer hitches while using the wash

[@noahharris2260]

You always have to leave your tailgate up on your truck and your hitch needs to me removed

[@NicholasNormand]

@@noahharris2260 that's something that the driver in front of jacob or the elevator channel didn't know there r no signs stating that

[@noahharris2260]

@@NicholasNormand well in a touchless automatic on the laser wash m5 and 360 if the arm bumps a tailgate a trailer hitch or a bike rack it has a green light the lights up and tells it to go back a little bit the first time the second time it shuts down

[@kristincrodian6627]

At 3:39, The PDQ Tandem said, "This transaction has been cancelled."

[@pinchy08]

Kristin Crodian I heard that too.

[@stevekirkpatrick8387]

8:59

[@TheWASHINGMACHINEBOY]

3:39 yeah she shut down the system

[@Alarmo05221]

I was laughing when the system broke because it was hilarious when he left the bed down. Oof

[@noahharris2260]

His tailgate was down that caused the car wash to shut down

[@Alarmo05221]

Already know lol

[@joricheleven3128]

@@noahharris2260 a

[@iN00bT00ber]

Why's Will Ferrell running a car wash? Reference to voice at 6:40

[@chaoszombie9995]

Loll

[@pinchy08]

iN00bT00ber that manager did sound like Will Ferrell.

[@somebodyrandom809]

Windows cannot find carwash.exe. It may have been renamed or deleted.

[@BiRDiEHere]

Omg! So true!

[@chellelucero9102]

Chaos Zombie999 gg g

[@christinagoodescarwashvlog4850]

As it told him to pull out, the Access Machine said: "This transaction has been canceled."

[@pinchy08]

Guy in front of you should have never left his truck bed open.

[@davidsalmons80]

Same!!!!!!!!

[@shy9712]

Pinchie08 I think p

[@makeshiftlake3519]

Pinchie08 absolutely

[@linaomari1735]

Bed?! You mean Trunk

[@xcbot]

Lina Omari no that’s a truck bed trunks are in cars not trucks

[@4forevergirl4]

Car wash experiences I've had: 1) accidentally drove through one once 2). I was in one once and the power went out.

[@ve12kick420]

That sounds scary

[@erickwardwell962]

PDQ tandems are actually designed to wash all vehicles including dual rear-wheel or dually trucks. The problem lies in people modifying all the time that can give the tandem problems. (Light bars,brush guards, bug shields,etc)

[@noahharris2260]

The problem is you can’t have your tailgate down on your pickup truck the side brush can make it stop when it hits it and shuts down

[@georgef551]

If there was no sign to keep the tailgate up, then he can't be faulted, but stupidity still shows here. He could pull out, and drain it there.

[@noahharris2260]

There is a sign telling you to leave the tailgate up on your pickup truck

[@somebodyrandom809]

Windows cannot find carwash.exe. It may have been renamed or deleted.

[@hyvahyva]

believe it or not, some of the pdq washes do run windows, and do require periodic reboots

[@ArisBuliteanu]

hyvahyva when the dryer started up did it say, forward,,, forward,,, forward,,, forward? Etc.??

[@noahandrewsandrews7830]

@@hyvahyva interested I did not know that thanks for telling us

[@sherringtonjr78]

Hi chat

[@fansgalorellc621]

@@ArisBuliteanu Yes. The actual drive sign talks. I cannot remember exactly what the prompts are, but one is “Slowly, Slowly, Slowly” as you get into the bay. If you pull too far into the back it’ll say “Back up! Back up! Back up!” followed by a siren noise.

[@CSXrailfan814]

As a wash attendant for a tandom there a piece of work to reset. And to all truck owners put up your tailgate automatic washes dont work with them down tuch or tuchless.

[@noahharris2260]

6:55 what caused it to stop was is he had his tailgate down on his truck that’s why he didn’t have it up

[@kadenvanciel9335]

This station and PDQ should run a diagnostics check on this wash very often, so that it wouldn't fall apart.

[@coltconnorproductions1016]

i went here a year ago and the brush was still broken xD

[@paulstecker5693]

Yeah friend I'll agree with your comment. He should have never left his truck bed open. That's why the brush can go around the corner. It got stuck in the bed sticking out the door. I go through a car wash freeway car wash but the towel dry the car before you leave where it went through. I like it like that. I think it's better that the machine I'm seeing here have people like to do their car their way they got the right tube. Not a problem. Thank you.

[@ppoutine]

I always love "ride along videos". It's just kind of interesting to see what happens.

[@kimhorton9505]

The car wash currently closed please come again 😊

[@desertfoxx1823]

Spot-free wash/rinse is with a good RO (reverse osmosis) system. My buddy works for a national car wash company and they use rock salt filter system. Also a chemical is used as a drying agent added to the final rinse to help the water bead up.

[@Thestuffguy1]

Need to upload more car wash videos

[@michaelasebedo8392]

I like the Tandem Touch but i do agree that this unit does not care for trucks. We have one in the El Centro CA area and i can tell that the owners don't care for it and that the "natives" are rough with the unit.

[@TheGamerWithMore]

Hey The Elevator Channel! Did you know that over here in Australia we have the WashWorld Lazer systems. I also looked at the payment systems for a PDQ Tandem, The use a Windows CE 6.0 based PC with a ARM based processor which means that it is quite easy to hack through a WiFI connection if the payment system is not setup correctly. Just wanted to give you this tidbit of info.

[@FeralFoxDX]

Ooooooo

[@somepersonwhowatchesandhas5198]

O dam son

[@adelaideautowashes]

Lol i like your name

[@Coolerics2011]

8:55 the brush thing was spraying bug prep on your car to kill any annoying bugs. PDQ calls it bug prep in ads, anyway. Laserwashes do the same bug prep before presoak.

[@Mc_TheOriginal]

Pdq is like “I’am not feeling it “ 2:09

[@やっちゃん-p3q]

あかたま

[@MrTsolar]

Had the car in front of me screw up a laserwash a few months back. It was during cooler weather and it had automatic doors. The doors' code hasn't been perfected yet and the exit door opened before the wash was finished (which I think is supposed to happen so the dryers work better). The only problem was the person pulled out of the bay before the dryer was done. Took it 5 minutes to realize there was no car in it and it reset itself.

[@noahharris2260]

On the laser wash m5 360 or 360 plus sometimes they don’t always go back to the home position plus I had the same problem after I payed and when I was in it someone’s car in front of me when I was waiting the manager code me through and I had the same problem when I was in it on the pro touch tandem if you leave your tailgate down on your pick up truck, the side brush will not be able to go across. That’s why it will shut down on the laser-wash m5 360 and 360 plus at the arm hit something on a vehicle the first time it resets it and goes out more if it hits the second time, then it shuts down then it will tell you the drive forward with soap on your car and the dryers will come on

[@graceohara5698]

The Car Wash Is Currently Closed Please Come Again

[@noahharris2260]

3:37 the wash shut down on the pickup truck that had the tailgate down and sometimes the pdq wash system if it shuts down sometimes they don’t go back to the home position

[@windlockatc]

Interesting wash. PDQ has some awesome equipment. Great video as well.

[@noahharris2260]

6:26 the problem was not the hitch it was his tailgate that was down on his pickup truck because that was the problem you can’t go through a soft touch pro touch tandem with any bicycle rack or a basket rack or anything like a big ladder on a rack in your truck because the side brushes or the top brush will get hung up now a touch less car wash with the laser wash m5 360 or 360 plus if it hits anything like a pickup truck tailgate that is down it resets it and goes out more what it hit behind the vehicle

[@kh-b]

The car wash is now currently broke and closed and please try again later and come again

[@noahharris2260]

3:15 the guy drove forward a little bit

[@georgef551]

It's typical over here: The bigger the vehicle, the smaller the brain of it's driver.

[@rafee9442]

georgef551 Truer words were never spoken.

[@noahharris2260]

Same

[@dylanhughes5944]

damn I have a subcompact, I must be a genius! LOL!

[@travis4798]

Your not suppose to leave tailgates down or mirrors extended out, hitches in place in the car wash, this is a prime example of that. The machine didn't estimate the tailgate probably because it was out of sight of the sensors. Tailgate caught it and the machine shut down. Better the machine stop then rip the guy's tailgate off and/ or break the machine, those brushes are very powerful.

[@noahharris2260]

I know on the pdq tandem soft touch you have to leave the tailgate up on your pickup truck

[@the_alex_ellis_channel6923]

We get PDQ in New Zealand. My local caltex has a new laser-wash 360.

[@adelaideautowashes]

PDQTandemRiteTouch.exe has stopped working.

[@Echo3-1317]

As of August 2024 this PDQ tandem has been replaced with a Laserwash 360

[@noahharris2260]

7:21 at least he had his tailgate up when he pulled in the car wash now it will not shut down

[@kadeperry673]

When the tire brushes came out it was halarious

[@justin_wayne_elrod_jrod]

Did the system reset after your turn or during your wash cause you should have taken a license plate pic for the people who own that place make the guy pay for breaking a carwash

[@nelsonahlvik6650]

It didn't break. It shut down for safety purposes. Then it did a self-test after the truck guy pulled out.

[@noahharris2260]

Sometimes these pdq systems the newer ones on the pro touch tandem the laser wash m5 360 and 360 plus after the wash shuts down it says the car wash is closed on the payment machine sometimes it resets it and sometimes these systems reset and go back to the home position but not always

[@justin_wayne_elrod_jrod]

@@noahharris2260 oh ok I see

[@noahharris2260]

@@justin_wayne_elrod_jrod on the laser wash m5 the 360 and the 360 plus if the spray arm hits something behind the vehicle it resets and moves out more what hits if it hits it twice then it shuts down I don’t know about the laser wash g5 on the laser wash 4000 if the arm hits something on a vehicle it shuts off amazingly the the newer laser wash systems when the machine starts in the front and moves its way to the back. It’s gotta a sensor that reads that stuff and it doesn’t know how long the vehicle is it’s trying to figure out the measurement of how long it is on the vehicle I’ve only been through a laser wash m5 360 and 360 plus

[@SFCarWashChannel]

The flash dry was a fail. No system should put RAIN-X on after drying.

[@chaoszombie9995]

well the machine did a flash dry then the rain-x then a dry pass

[@TheHaters205]

I heard the PDQ say your transaction has been cancelled

[@pisceslernin]

+Thehaters 205 when?

[@TheHaters205]

+Michael Anaya it said it at the 3:53 mark.

[@pisceslernin]

Thehaters 205 oh. thanks.

[@TheHaters205]

+Michael Anaya np

[@pisceslernin]

+Thehaters 205 i didn't hear it say one word.

[@noahharris2260]

The directions tell you to leave you tailgate up in your truck going through a pro touch tandem

[@noahharris2260]

Every time you leave your tailgate down in your pick up truck going through a car wash it will shut down the machine

[@TheWASHINGMACHINEBOY]

the lesson from this video: never leave the door of a truck’s cargo hold open in a brush car wash

[@adelaideautowashes]

PDQ_Tandem.exe has stopped working.

[@noahandrewsandrews7830]

What were the systems in the other Bays?

[@bigburgerboi2005]

obviously manual bays -__-

[@giancarlofelicianocastaned9316]

What car wash has 9 automatic bays?

[@carwashreviewsandmore7609]

@@giancarlofelicianocastaned9316 Exactly.

[@rks12300]

What's ur Car?

[@isaac24]

This was a 2000 Toyota Avalon XLS. He doesn't have it anymore, now he has a 2009 Toyota Avalon Limited. Both of the belonged to his mom originally, and they were both handed down to him. The 2000 was sold to KZbin user DieselDucy.

[@TheWASHINGMACHINEBOY]

2:10 carwash controller: carwash.exe has stopped working

[@carsonpergar7689]

I wonder why it keeps telling you to wait?

[@mackpines]

Did they install locomotive horns on those emergency vehicles? If that doesn’t get your attention I don’t know what will.

[@WisconsinCarWashChannel]

This problem SHOULD be fixed on PDQ'S new Surfline! But I still love Regular Tandem More!

[@thischanneldoesntgetusedoften]

Same, and I recently found a Tandem and 360 near me in Tupelo, I don’t think I’ll visit it anytime soon, but still cool that I found two of the modern systems made by pdq

[@thischanneldoesntgetusedoften]

Also I just found out it was actually a Tandem RiteTouch

[@patitauiliili1221]

Tandem: time to brush this dirty car. Truck: *puts back down* Tandem: oh no! Tandem: *shuts off*

[@TWatcher_]

why would you make a video about washing a car in the first place?

[@wanderinguser7665]

Why did you come here to watch it?

[@melindamanton8554]

BAHAHAHA SORRY it's so hard to find someone to make me laugh these days, Thanks for the comment about filming Ur car in carwashes, Lmffo

[@thecarwashelevatorfanatic7433]

Wow, all of you guys are INCREDIBLY rude.

[@blazebrodypc2006official]

T.Watcher Because, why not?

[@TWatcher_]

@@blazebrodypc2006official ...

[@tdoge6919]

How did the spinbrush stop twisting

[@gootube2452]

It's because that brush was going through some tough times in life.

[@chaoszombie9995]

It's a carwash

[@partiallysd]

As it said if you watched, his tailgate was down.

[@hyvahyva]

that's not a failure! most automatic car washes have control logic to avoid dropping the top brush into a pickup truck bed.

[@AdamsCarWashVids]

but not the side brush into the hitch

[@danielonn2002]

The car wash did a self checkie self checkie

[@mitchellarmstrong3759]

It hit the door to his truck bed. Since it was down the machine thought it was a foreign object and that’s why it stopped. I wonder what his consequences would’ve been.....

[@noahharris2260]

The tailgate was down

[@gator_productions]

If u have a sun roof u need to have it on low settings or it might leak

[@procksomaterman]

i would say no because ryko system uses hydraulics to push the brushes back and since they don't move across by using a chain to guide it, the force is not applied to the bush. but the bushes would probably bang against it and since the system tells the brushes once the car wash finds the back they they go further and even if the brushes hit the tail gate it would just continue to move back and go around the tale gate,

[@Diamond31pro]

This was the first vid I watched on your channel

[@LucaTheSkunk]

I have a question My 2000 Dodge ram 1500 has a light bar behind the cab with 2 KC lights on it that stick about 5 to 6 inches above the roof would it be ok to bring it into an automatic car wash?

[@forgetmercy8981]

I wouldnt risk it

[@KandiKlover]

Hes lying to look cool lol

[@LucaTheSkunk]

***** who me?

[@missyhansen9331]

Can someone tell why this is a popular video? All it shows is him going through the car wash and the machine stopping because of the open tailgate on the truck. I'm pretty sure that it stop because the automatic car washes have sensors that usually size up your vehicle before it starts washing so your vehicle can get the proper wash. It probably saw the flaw of the tailgate being down and quit so it wouldn't wreck the vehicle. The automatic car wash I use will go over my car twice before anything start then the bars on the side and above the car will adjust to my vehicle and then it starts the wash.

[@EthersCubing]

Well I suppose because it broke and when he left it was still stuck there and everyone is wondering why i guess

[@WarrenGarabrandt]

I went through that EXACT car wash about a month ago (I think it was the same one anyway). Is this the one just off the freeway? It's a Conoco, across from a Phillips 66 station, right? I spilled some gas and wanted to wash it off my car, lest it damage the paint. It was a little nervous about it, but it was alright.

[@braydensollie8823]

Can somebody please tell me why it just stopped?

[@TheWASHINGMACHINEBOY]

also when i was a kid i was afraid of brush carwashes because i thought only they had the blow dryers (which scare me by their noise) and the other carwash didn't have blow dryers now i'm not afraid of brush carwashes

[@southcwf]

You must have probably grown up in Jefferson city MO

[@Rico_MLG]

0:45 HOLY SHIT GTA ONLINE IN REAL LIFE

[@jkelliher_24]

I wish they had a pdq tandem in Sothern California.

[@mnsirens]

Jake Kelliher The most Common places to find Automatic Carwashes, especially in Bays, are in the Midwest. It's too cold to wash your car yourself outside, which leads to the Dilemma of Salt eating away at the Undercarriage. Lines can be HOURS Long up here during the Winter. Most machines up here are absolute MAMMOTHS. They are Enormous and Advanced pieces of Machinery to make sure Consumers will keep coming back. ProTouch Tandems, ProTouch Icons, Laserwash 360's, and many other Modern Systems are very Common here

[@Alpaquette91]

You're so fascinating to listen to!!

[@melindamanton8554]

BAHAHAHA

[@elevatordailies]

I seen a PDQ Tandem fail with the scrubbers. It was probably due to someone not following the rules.

[@noahharris2260]

His tailgate was down

[@therealkidhasgame9922]

Is you in car wash in the hood cause there was a lot of sirens6

[@dougborrett3566]

Give an American a microphone and he will talk all day.

[@jonslagter]

I have had a lot of things happen at washes I service, One man took his fathers brand new truck through with a wheel chair rack attached to the back and then got peeved when the machine ripped it off the back. Even though its posted not to go in with anything in the tow receiver of the vehicle. Some how its the wash owners fault for his stupidity. Loose items in pick up beds is another good one, they blow around when under the dryer and can crack windows. I've seen ratchet straps get hooked by the top brushes and lift a truck off the ground.

[@snddly84]

"...this was my most exciting carwash the first time I came through here, and I think it's keeping that tradition up." Ya'll REALLY need something better to do in Missouri.

[@rush5rider]

Never leave a truck's bed door open that's how the car wash brush got stuck

[@superlu1gi527]

PDQ Tandems are EXTREMELY RARE in Pennsylvania.

[@neaelevator]

That was very interesting to see. I guess I am going to have to film some of the many washes here in Jonesboro.

[@Mrjbroo11]

You film these with your cell phone? Its got a great quality.

[@nelsonahlvik6650]

He films them with a video camera

[@SamSitar]

looks like the washer got stuck on that tailgate.

[@babypinky318]

why don't you film a magic wand nexus aqua jet carwash

[@noahharris2260]

3:37 tells him to pull out

[@fnulnu6300]

Why were you so intent on using that particular car wash if you saw it malfunction?

[@j3videos633]

The tailgate needs to say up when he is in the car wash

[@noahharris2260]

Yes that is the problem going through the pdq pro touch tandem with the brushes if you have a pickup truck you have to leave your tailgate up

[@ppoutine]

Ha ha, interesting. Have you considered more road trip videos? I find those very entertaining for some reason.

[@davidpatterson6589]

it wasnt his hitch. the wrap got caught on his tailgate cable

[@fnulnu6300]

Your car is so quiet inside, Lexus?

[@lizzyluv96]

Why were you recording going through a car wash?

[@nelsonahlvik6650]

Because we are car wash enthusiasts

[@joshuanichols1816]

spot free is a low pressure blast of water only their isnt a chemical added its just low pressure water

[@brianbirc]

+Joshua Nichols No it is soft water without the minerals that leave spots gray brain.

[@2424Goldie]

Actually it's water with all minerals inside it removed so it's only pure water which doesn't make any spots.

[@brianbirc]

2424 oh I see hhhmmm

[@GARRETTJRDP]

The Brush got stuck in the back on the truck. There’s only one brush in there

[@Mau506]

I knew something would fail with those robotic stopped-car washing equipment and now I see what.

[@mnsirens]

If it wouldn't have stopped it could've damaged his truck and the wash. If it wouldn't of stopped, the owners would have to pay potential thousands of dollars in damages, while the man in the truck would have to pay for damage on his truck if it did damage his truck. That sensor just saved thousands of dollars by preventing a full collision

[@nelsonahlvik6650]

@@mnsirens yeah. Safety switches are requred for this type of semi-dangerous machinery

[@sunshinesuds]

With Touchless, But they suck with friction. their touchless systems are amazing exept for the G5-S, you have to call for maintainence every time the power goes out... thats why they arent very popular in florida because we have lightning ALOT and and that causes power outages

[@dvddmc]

were you driving a Toyota Avalon in his vid?

[@TheAfghan72]

+dvddmc looks like a corolla.

[@Gosh_Josh]

+Afghan Lion avalon xls

[@TwisteeTheDefiant1]

Yep 2nd gen Avalon my mom had the same model with the same trim level. Xls

[@fnulnu6300]

Afghan Lion idiot..Corollas aren't that big and luxurious.

[@RailfanBrenden.]

0:29

[@laoleader913]

On 2:09 tell the manger of this car wash if you see this happen

[@topgear806]

Me and my friends would've taken a 2008 Scion xb to that PDQ tandem car wash that is malfunctioning and falling apart and that guy and his truck were in that car wash and the side bursh got stuck by the back of his truck and i'm sorry about that and one of it's car wash parts is gapped up at the top someone drove right into there and also know that this car wash does not like washing tall vehicles that i know of.

[@codymcaleer7209]

When are you gonna get a new car

[@seanharvey1250]

What Toyota do you have