I’ve seen the 2 other vids before this one. I don’t even have a boat and I enjoyed watching the full install. Good job on this project
@Mappy-xn1om5 жыл бұрын
I like your enthusiasm with the sound once you fired it up !! I just got the TM1000X5ad for my boat and can't wait to get my install done !! Your videos are all great !!
@markdemelo76437 жыл бұрын
This just proves this shit is very addictive. This boat sounds sick already i can only imagine with that amp. I'm dying for the guy with the big truck u just did to add a amp he definitely will benefit from it. Another sick video my brother if i ever hit the lottery im going to higher u full time to hook up everthing i own to the max. Woohoo!
@Evilthx4 жыл бұрын
Thank you for the gain setting instructions.
@bobbg90415 жыл бұрын
if you put a nut on your bolt before you cut it, you will fix the threads taking the nut off the bolt. then you don't have to file or grind the bolt to put a nut on it. I learned that installing at car dealers in the 70's and not having a grinder on hand. but I do have 17 years in retail stores too. Hey that about your age almost. Never lose the attitude! I like it your excited and customers see that. And you have fun at your job, thats key is doing it long term. Why when I started installing we have to change tubes in the radios and we'd install under dash record players until somone invented 4 track tape players. then came 8 track, and cassette then CD" WOW Keep in mind I'm an Audiofile I don't use clip lights on amps to set the system up. Did you know Yamaha made car stereos at one time?
@duaneh19735 жыл бұрын
Man! That boat sound system is hitting!
@Froggy5437 жыл бұрын
I had a good laugh when you told us you forgot the main fuse.
@PeachStateATV6 ай бұрын
3m cable clamps work great for getting wires hidden on the top
@pomdejesus8150 Жыл бұрын
I have a TM400x4ad Amplifier with TMS69 and TMS65 speakers, and my source unit is the Rockford fosgate Bluetooth receiver, how can I get a CLEAN set-up because I don’t have a head unit for my motorcycle. Can you guide me?
@Clint_L7 жыл бұрын
Best video yet. Awesome work dude.
@bigmike3ooo5 жыл бұрын
Great video, can you explain how you hooked the pmx2 to the amp. The mpx2 shows there is a 2 rca output front, and a 2 rca output for sub. It looked liked you used both outputs to the amp?
@KatsuBoi7 жыл бұрын
do you recommend these for car use? seems like its cheaper than the T400 atm so I was thinking about getting it for my car O:
@bobbyogle3 жыл бұрын
We just got the same boat from my mother in law now I know what system to get
@majorskillz6235 Жыл бұрын
Hey where did the fuse go in the amp
@gilbertovelazquez21964 жыл бұрын
congrats bro great video,excellent sound
@ScottLevey3 жыл бұрын
What is the track you used when you tested the amp...
@straightshooter93974 жыл бұрын
The head really shouldn’t be set at 100% output when tuning the amp. 75-85% depending on the source then locked in with a limiter. It prevents maximum output distortion at the head unit. Also, these speakers can see a lot more juice than that amp can give them. Especially in the M2 series that replaced them. The speakers in this video are 200RMS and the new ones are 250RMS. The amp is only 100-125 RMS.
@pedrotavares82127 жыл бұрын
Can you put,all the equipement install in the Bayliner? Nice job! Thank´s Best Regard´s
Many thank´s my friend! Keep up,the good work... I´m going to test in a,let to now. Best regard´s
@adamgatt66166 жыл бұрын
hey love ya work if only u were in australia .. i have a question would that amp work well in a seadoo jetski with 2x 6inches
@jmink7 жыл бұрын
Thanks for the videos on the Rockford Install. This maybe a longshot, but do you happen to know the size of the source unit? I have looked through the owner's manual and all I could find was the size of the hole that needed to be drilled through the panel/dash, but not the size of the face.
@caraudioetc7 жыл бұрын
jmink it will be on the Rockford Fosgate website in the specifications
@jmink7 жыл бұрын
+Car Audio.etc ha ha, thanks for pointing me in the right direction. I found them -- Dimensions (HxWxD): Width 4.5" (11.5cm) Face Depth 1.5" (3.8cm) Mount Depth 2.9" (7.4cm) Height 4.2" (10.6cm)
@PeachStateATV6 ай бұрын
Could you do a step by step on tuning this amp, I don’t even know where to download the music for the tuning
@christianrobles75613 ай бұрын
You can fin the test tone as "1khz tone" in KZbin, I would recommend you to do a research for a reliable KZbin audio downloader, whey you download the 1 khz test tone, play it from your device, it could be aux, Bluetooth or usb into your head unit plugged to your amplifier but your speakers unplugged, remember to set your eq flat, no bass from the head unit and start setting the volume up while checking for clipping indicator in the amp
@christianrobles75613 ай бұрын
But remember, check the 1khz tune just for the head unit with the amp gain set to the minimum. Once the max head unit volume with no clipping has set, with the same 1khz test tone and the volume set in your head unit you can start turning up the gain set until reaches the clipping light red then turn down a bit til turn blue, same process with each channel. And you are ready to go man
@christianrobles75613 ай бұрын
Finally, when you get all set, turn down the volume in your head unit, turn off and plug in the speakers, turn on back your head unit, stream any song and check if there is any distortion, if it is I would recommend you to set up your amp gain just a little bit almost nothing, when you can play any song free from distortion now You can start tuning the audio from the head unit, if for some reason you don't like you can tune from amp Frequency or amp punch eq, any questions let me know!
@juanarismendez1034 жыл бұрын
Hey bud would 2 of those amps good for 2 sets of 8" M2?
@joelvelazquez28234 жыл бұрын
You should wear eye protection while using the bench grinder.
@johns3365 жыл бұрын
What did you ground to? Do you think it would be an issue grounding directly to the battery?
@mdubk20235 жыл бұрын
No I had to do that to the pontoon I installed only place was to ground was the battery
@jessenurse91947 жыл бұрын
Good job bud
@RockfordF150Bass6 жыл бұрын
Gains down crossover up just like the dd1
@tek22367 жыл бұрын
Who would you recommend that amp for a motorcycle system ?
@bobbg90415 жыл бұрын
you think that sounds good in the install bay, its going to rock out on the water. Water pressurise the boats hull and re enforces the sound even better.
@MrSpanky4737 жыл бұрын
I've done several Rzrs/ side by sides and boats..I hate doing boats. Did a G3 aluminum boat once..cut my arms all to hell.
@xXAKAYXxNZ7 жыл бұрын
the salt air will make the plastic swell react with the stainless steel bolts. creating fumes. then the speaker coils will ignite the fumes.....💣💥
@lasagna31065 жыл бұрын
Wrong
@CarAudioInc7 жыл бұрын
I love your vids.
@GatesRapes2 жыл бұрын
I always text my installs with songs by Scuzz Twittly
@TVBhering7 жыл бұрын
Sorry by my english. Ok, you did a grade 8 job. To achive the 10, you should welded all the wires! And I think you block the amplifier ventilation in your instalation.
@williamwest89247 жыл бұрын
was that bolt hot ? lol
@radekgrabski34826 жыл бұрын
im afraid that this wire on the front will rattle...
@andreasmichelsen27247 жыл бұрын
24:30 Haha
@conspiracy_00115 жыл бұрын
Hold the fuck up did he just measure something in feet.