Carbon Fiber Surfboard Glassing Time-Lapse [start to finish PART 2] | Hot-Coat | Sanding | Finishes

Link to part 1: • Surfboard Glassing Tim...
Full carbon fiber surfboard glassing but this time I did not use the vacuum technique - I wanted to be able to compare between the two, it worth the time and the effort of the vacuum? and extra cost? let's find out!
Board dims are 5'10 X 18" x 2 5/16"
In this video, I did the laps sanding, hot coat - sanding and finished it off with a cool sealer for a silk sand finish. it was a cool build and a very very good result!
------------------------------------------------------------------------------------------------
Welcome to my channel
My name is Koby and I am a surfboard shaper from Israel
For the last 7 years, I shape and build surfboards in my small workshop here in Israel. I will upload surfboard-building tutorials, shaping tools reviews, and great tips about working with epoxy resin.
All my boards are made from EPS and epoxy resin and I like to go crazy with my resin! I will do swirls using tints and pigments, cloth inlays, weird shapes, and more.
I can talk about surfboards all day, so feel free to ask me any questions you may have and I will do my very best to answer them in the best way possible

[@serenodiederichsen9776]

Hey Koby! thank you very much for the video. It was very nice to compare with vacum bag and without. Other than that of shape looks amazing! Cheers from Brazil! enjoy the weekend!

[@kobymaymonsurfboards7320]

Cheers from Israel- no waves in the forecast so not a great weekend 🤣 have a great weekend too 🙏🏽

[@BangLang_surfboard]

That's great work! Unlike fiberglass, carbon is not very good for the lungs, so I hope you pay attention to your protective gear, I want to see a lot of your work, you should always be healthy! I'm Shaping in Korea I support you from afar, Bro~

[@kobymaymonsurfboards7320]

Thanks! Yes i am taking care of it 🙏🏽

[@marcass100]

So 5 percent of 2kg is 100gr. I really appreciate you have done this testing so I don't need to. Great job.

[@kobymaymonsurfboards7320]

5% of the amount you are mixing at the time, in this video i used 300gr for the hot cote so 15gr of pigment was enough to get it to be completely opaque 🤙🏼

[@juergensplieth6068]

Thx for sharing your interesting work. Looks amazing . I built some kitewaveboards in last wintertime, now I will try one with carbon. Best regards from the Baltic Sea🤙

[@kobymaymonsurfboards7320]

Good luck 🤞 🏄🏻‍♂️

[@seriksson9721]

I did. Thanks

[@WenereiKaraka]

Those 2 boards look awesome, would love to learn how to make a carbon board, and all the materials needed! Think it’s the only way to get one CANT afford one

[@kobymaymonsurfboards7320]

LOL, material are also expensive 😎 All the materials are same a part from the carbon itself

[@jasonw9431]

WHOA! That is a RAD board!

[@kobymaymonsurfboards7320]

Thanks brother 🙏🏽🙏🏽🙏🏽

[@henriknordgren2432]

Thanks for sharing, they looks amazing!

[@kobymaymonsurfboards7320]

You are welcome!

[@lynnh8189]

Thanks for sharing , Thinking of trying to do my 1st board this winter .

[@kobymaymonsurfboards7320]

Don’t think- go for it! 🤩

[@Gustavo_Rodrigues19]

Great job, amazing

[@kobymaymonsurfboards7320]

Thanks- appreciate that 🙌🏽🙌🏽🙌🏽

[@Dzjiefoils]

I expected the carbon didn’t stick an the underside of the board. But it worked very well! Nice build again!

[@kobymaymonsurfboards7320]

Thanks mate! It is a wonderful board! The owner shreds with it, i will do a video of it 🤙🏼

[@bryanrub]

beautiful board!

[@kobymaymonsurfboards7320]

Thanks Bryan 🤙🏼

[@user-jr9ul1mr5m]

Beautiful brother

[@kobymaymonsurfboards7320]

Thanks Kob Kob 🍀🍀🍀

[@keatingcustomsurfboards185]

Again!!!! Great

[@kobymaymonsurfboards7320]

🤩🤩🤩

[@levijonbriones3634]

what grit sand paper did you use when sanding off the resin in the beginning?

[@kobymaymonsurfboards7320]

Witch part? If you are talking about the deck and red resin- i start with 120, than 240, 320, 400 and water paper, if your hot cote is not perfect you should start with 80 grit but be careful not sand through 🤙🏼

[@TheIrishalf]

Amazing boards. Love the finish. Concrete sealer ? Epoxy or Acyclic base Satin finish ?

[@kobymaymonsurfboards7320]

Yes it is concrete sealer, not sure about the base but epoxy makes more sense 🤙🏼

[@juliendebury1519]

Well done! I'm on my way of building a vacuum bagged carbon one as well! What carbon 3k weight did you use?

[@kobymaymonsurfboards7320]

200gr - it is great 🤟🏻

[@diogogoncalves5549]

hey man, that sealer gives it a fantastic finish. Wich sealer is it?

[@kobymaymonsurfboards7320]

Concrete sealer from the local store- nothing special

[@lalaboards]

You can leave the decks black if you go waxless Gryptalite clear traction . You can thank me later . Good job

[@kobymaymonsurfboards7320]

I like the was - old school is the best school 😎

[@guzman3924]

Nice job!! freelap are visible on the botton? do you use fiber or just resin to laminate logos? 

[@kobymaymonsurfboards7320]

You can see the lap buy almost nothing, it is bleeding nicely. I never done color logos , i used an Acrilic pen and clear coat over it 🤙🏼

[@ArdyAryan]

Gorgeous board Koby! how much does one cost for a customer in USD? we have the Dark Arts here that builds carbon boards and they are twice the price of a normal PU.

[@kobymaymonsurfboards7320]

Over here it is the same more or less - about 3800 nis (1250$) materials cost went way up (epoxy mostly) due to shipping prices 😭

[@ArdyAryan]

@@kobymaymonsurfboards7320 understandable! totally worth it ;)

[@kobymaymonsurfboards7320]

@@ArdyAryan 100%, these boards will last 4 times normal PU boards and 3 times the life of an EPS

[@dudeleboski2692]

Concrete sealer. Is it expensive? Who shaped it? Where are you guys located? Real nice shape by the way.

[@kobymaymonsurfboards7320]

I am in Israel, the sealer cost about 30$ and last for many boards 🤙🏼

[@dudeleboski2692]

That resin is Polyester. What blank did you use for the shape?

[@kobymaymonsurfboards7320]

It is epoxy, i use ONLY epoxy so all the blanks are EPS 🤙🏼