Mechanical Reasoning Test (Mock Exam Questions)

[@CareerVidz]

Get FREE Mechanical TESTS at www.MechanicalTests.co.uk/

[@multiverse6989]

In question no 8, the first figure has two supports therefore force required will be half of that in figure b.......please clarify.

[@arteerano]

Balwinder

[@joanantiporta29]

4

[@bilisiedaka6009]

B

[@bilisiedaka6009]

A

[@kirtseanvapor8296]

Q1 Point A Q2. Crane is equal because of the position of the load in which the 2 ton is at the farthest point of the crane and the 4 ton in which it is in the center therefore the weight of the 4 ton is divided by 2 because it is.in the center of the crane(correct me if im wrong) Q3. 4.Ball and hammer Q4. 37.5 ( divide the distance from the fulcrum to the farthest point of the seasaw its 1/2 of.the distance therefore divide the 75kg by 2 Q5. C both the same Q6. B point Q7. Point C Q.8 B. A Q9. 3 sledgehammer Q10. 75kg Feedback please thanks and if you have questions reply my comment

[@weston40on40]

Question 7: your answer is incorrect; the weight placed down is bigger than the one with the least leverage. So why would it balance if you give the heavier weight more leverage than the one with less weight and leverage?

[@maltmel]

Q3. WOULD BE A CLAW HAMMER AZ THA' MOST IN GENERAL HAMMER! THAT IZ WHY IF U WERE TO COP AN AVG. TOOL SET, MORE THAN LIKELY A CLAW HAMMER WOULD BE THERE AZ THEE ONLY HAMMER.

[@mattbrittain6478]

A, C (if halfway), D, A, B, B, A (I think right hand side longer than left), B, C, B.

[@CareerVidz]

Well done, Matt - correct answers to our Mechanical Reasoning Tests exam :)

[@charlessaunders9227]

How is 5 b

[@mattbrittain6478]

@@charlessaunders9227 the water pushes the valve into the block, not letting the water escape. The valve on A if free to be pushed aside to let the water out.

[@Melody-jt6fw]

Number is still confusing

[@ealmwangjeon9599]

@@mattbrittain6478 Wait, I'm confused what about the blockage line between both of the tanks?

[@tonybradley8966]

He doesnt tell you what the correct answers are so a complete waste of time

[@CareerVidz]

It's hardly a complete waste of time. Most people post their answers to our videos and we then mark them for them.

[@tonybradley8966]

@@CareerVidz so just publish the answers in the comments.....

[@CareerVidz]

Thanks for your feedback. We believe people are more likely to try the tests and submit their answers if they are not shown the correct answers beforehand. :)

[@zacksaunders8957]

@@CareerVidz that makes no sense

[@CareerVidz]

Thans, Zack. We will be making more videos with answers included soon. Have a great week, Richard :)

[@tonedeff15]

Cant understand why you tell everyone 'well done you've done well' but you don't share the actual correct answers, so nobody knows how they actually did in the test- rendering the whole thing a waste of every bodies time. Baffled.

[@B_Machine]

It's because he's trying to get us to comment so he gets more traffic on his videos, and he's trying to play it off by referring to it better teaching.

[@lorddro717]

True

[@saiello2061]

A,C,D,A,B,B,A,B,C,B Q2. Difference in weights needs to be better highlighted. Q8. Wording slightly ambiguous.

[@CareerVidz]

Can you please advise the question numbers?

[@saiello2061]

@@CareerVidz I did.

[@jamesherman6492]

Unless your selling tests similar to this one, what's the purpose with no answers afterwards? Weird video as you explained the questions in much detail and pointing out the time left to answer, but leaves the viewer wondering......

[@Evereghalo]

Yea I find it kinda garbage that the answers aren't included.

[@professor4202]

@@Evereghalo it's total garbage. it's just clickbait to sell his other crap.

[@josephconroy7649]

a, c, d, a, c, b, b, b, c, b - judging from others, only my answer for 10 is different - given the pulley setup adds a mechanical advantage of 2, the force req. is half the weight of the block (75 / 2)?

[@brujeriab7600]

The pulley has no mechanical advantage as the weight is direct on it ?

[@josephconroy7649]

@@brujeriab7600 the location of the pulley doesn't affect the MA in this example - there are two 'pieces' of cable providing vertical force, so the load is shared between them

[@hellraisingc7]

1) a 2) c 3) d 4) d 5) b 6) b 7) c 8) b 9) a 10) d

[@kumarpawar5030]

Why would u not puts the answar

[@nikcue2542]

I skip this guys videos

[@CJT49]

​@@nikcue2542 cause you lazy af

[@HuyNguyen-gl4wl]

Give us the answers PLEASE! The video will be improved so much better and gain more views or share with us another video that has the answers for this one.

[@CareerVidz]

Hi! Would you like to share your answers here? I will be more than happy to mark them for you :)

[@theministryofdecolonizatio6480]

@@CareerVidz Stupid, why don't you provide the answers^

[@tammyallison8735]

@@CareerVidz These are my answers 1. A 2. B 3. D 4. A 5. B 6. B 7. A 8. B 9. C 10. B

[@ackah55]

I just want to say thank you. I went to sit my test yesterday and I passed. I practiced ur test questioned and it made me feel really confident

[@CareerVidz]

Hi, Congratulations on passing your test! I am thrilled to hear that the videos made you feel so much more confident! Well done!

[@jusa2926]

I am not a mechanical; however, I thought I would do this exam for fun: 1A, 2A, 3D, 4A, 5A, 6B, 7C, 8B, 9C AND 10D.

[@jojojaykay]

These people are right not having the answer key is old fashioned in a bad way and to the detriment of the material.

[@modrisstrautmanis5702]

Thank You for refreshing my intuitive senses...:) , great exams I love it! Q1-A Q2-B Q3-D Q4-A Q5-B Q6-B Q7-A Q8-A Q9-C Q10-B

[@CareerVidz]

100% correct that's awesome Modris! Well done!

[@liangamab3582]

A, B, 3, D, B, B, C, A, 4, C

[@josesantiago407]

good stuff

[@williechew8349]

1) A, 2)A , 3)3, 4)A, 5)B, 6)B, 7)B 8)A, 9)4, 10)B .

[@kc5068]

3. Is 4,ball peen hammer

[@KarlHolmes-l7c]

Hi Richard this is my first time having a go I’ve have a test on Tuesday Q1-a Q2-c Q3-d Q4-d Q5-b Q6-c Q7-c Q8-b Q9-c Q10-d Thank you for your help Karl

[@barunpramanik786]

4a

[@Rays-gx1le]

Q1 is A) Q2 is B) Q3 is D) Q4 is A) Q5 is B) Q6 is B) Q8 is A) Q9 is 3)

[@CareerVidz]

Thank you. Excellent answers, 100% correct.

[@michaelsmith1214]

Where are the answers?

[@ismaeljimenez451]

Isn’t Q5 both the same? I don’t know if it’s my mind tricking me, but both tanks are closed off on the bottom.

[@christianbatistaruiz3874]

thats what i thought aswell. Maybe they are closed until they drain them or idk....

[@arienfonfria]

No, just look at the valve on A, the pressure of the water will open it

[@user-gr8dr4rx1f]

1. A&B, 2. Both, 3. 4, 4. B, 5. B, 6.A, 7. B, 8.C, 9. 3, 10. B

[@user-gr8dr4rx1f]

So i put my answers above please twll me correct answers i may have missed. And thanks

[@Michael-gu9pw]

1 A 2 C 3 D 4 A 5 B 6 C 7 B 8 B 9 C 10 B Mark, please? Also thanks, bought two of your books! Might buy mechanical as well.

[@JeremiahMcpheron1986]

Point A, crane a , hammer 4, 75k, tank b , b ,b, a , 3 , 150

[@CareerVidz]

Can you please advise the question numbers?

[@JoelReyes-xo7qc]

Here is all the correct answers for those struggling to look for them. Q1: A Q2: B Q3: D Q4: A Q5: B Q6; B Q7: A Q8: A Q9: C Q10: B

[@nharrison1052]

Hello are you still available? I see most of the comments are sometime ago. Thanks, Nicol

[@KhoaNguyen-zc8vn]

My answer is A B A A C B C B C B Cry so much in my country we only study about goddam theories that we don't even use ( like wtf why do i need to know how a nuclear bomb worked) this test interested me because i need it to study abroad and the test is quite practical Bc of all of the above i really need more test questions, so that's why i watched and answered the questions In short pls send me more questions and tks for reading this. :)))) love your effort of making such vids

[@darienford860]

Um you do know they have questions like these in the U.S in engineering and mechanical test for a Job? And I would look over some of your answers

[@ranisjohnclienta.1854]

A,A,1,37.5kg,B,B,A,A,37.5

[@timothypattle7003]

A A 4 C B B A A 3 75 Wasn't sure about the question on crane. If it's tension on rope it would be equal, but if it's tension on crane structure it would be when crane isn't extended I may be wrong

[@noahjames6103]

I believe it is equal. Look at the weight and where the weight is at on the crane. I believe it's for the tension on the crane.

[@madankumarlopinti7962]

1Q=A 2Q=C 3Q=D 4Q=D 5Q=B 6Q=B 7Q=A 8Q=A 9Q=C 10Q=B Please tell me sir how Many answers i am right to given.?

[@CareerVidz]

Thank you for your answers. All correct apart from Q2 and 4. Well done. Please would you subscribe to my channel? I'd appreciate your support. Thanks!

[@DarrenGlover-q6y]

This video would be more beneficial if he give you the correct answers at the end.

[@waygood7740]

1.a 2.c 3.a 4.a 5.b 6.b 7.a 8.a 9.c 10.b I have a test tomorrow morning...

[@CareerVidz]

Hi, Thank you for your answers, 8 out of 10 here. Take another look at Q2 and see if you can get B as the correct answer. Take another look at Q3 and see if you can get D as the correct answer. Good luck for your test! Do let me know how you get on!

[@waygood7740]

CareerVidz got through to the next phase of my engineering assessment. Thank you for the help.

[@Gstarcooked101]

1. A 2. A 3. D 4. A 5. B 6. B 7. B 8. A 9. C 10. B Please give me some feedback. Thank you.

[@CareerVidz]

Hi, thank you for submitting your answers to this video. You got 8 out of 10 correct. Good work! Take another look at Q2 to see if you can get my answer option of B and also have another go at Q7 to see if you can get answer option A.

[@Pc-lx9lw]

1.A 2.both 3.4 4.37.5kg 5.B 6.B 7.A 8.A .9.3 10.150kg

[@greggucwa4543]

Got a 7/10 according to your comment grading. Thank you for all the info. I have a mechanical aptitude test next week.

[@CareerVidz]

Well done! You're most welcome :) I wish you the best of luck for your upcoming test!

[@Melody-jt6fw]

How did your aptitude test go,did it include any if these questions? I'm writing mine tomorrow

[@Privateperson2024]

@@Melody-jt6fw how did it go?

[@habeshaprince5380]

1a 2c 3d 4a 5b 6b 7a 8a 9c 10b thank you for all the info

[@CareerVidz]

Thank you for your answers. Q2 is incorrect, but all the others are correct. Well done. Please would you subscribe to my channel? I'd appreciate your support. Thanks! Get free access to our new FREE Psychometric Testing Suite: www.how2become.com/free-psychometric-tests/

[@marat_serikuly]

Q1 -A Q2- C Q3-A Q4-A Q5-B Q6-B Q7-C Q8-C Q9-C Q10-B Hope they're correct.

[@CareerVidz]

Hi, 6 out of 10 here. Good work! Take another look at Q2 and see if you can get answer B. Take another look at Q3 and see f you can get answer D. Also have another go at Q7 to see if you can get answer A as well as Q8 to see if you can also get answer option A.

[@X2ShineJewelry]

@@CareerVidz On a different comment from Matt Brittain you said answer 2 is C and answer 8 is B. So, which one is it?

[@barraxfl88]

How is Q8 A? Isn’t the first picture a 2 rope system and the 2nd picture a 1 rope system? So shouldn’t the 2 rope system require less force to lift the weight?

[@jamesharris4803]

Rope A requires a mechanical advantage of 2, 75 divided by 2 is 37.5, therefore rope B has a mechanical advantage of 1 which requires a force of 75 newtons to lift.

[@myrialynn]

They are both 2 rope systems, direction doesn't matter in this case (even though the rope A goes down at first, you still have force on it because it goes up next). I hope that made sense?

[@I-Gringo-I]

@@myrialynn Not at all, I think the A was correct answer, because the weight is shared with two hooks from the ceiling, and on the B weight is not share, it is still connected to the 1 hook, and second wheel just changes the direction of the rope which does not change the pull power.

[@bensharon5419]

I think I'm right, but a definitive guide would be helpful 1.A 2.A 3.D 4.A 5.B 6.B 7.A 8.A 9.C 10.B

[@CareerVidz]

Thank you for your answers. Almost 100% just Q2 is incorrect. Great stuff. Well done. Please would you subscribe to my channel? I'd appreciate your support. Thanks!

[@stenchosmells]

See how I get on A C D C B C C C C C Thanks

[@liangamab3582]

A, B, 3, D, B, B, C, A, 4, C

[@mq7447]

Q1. A Q2. C Q3. C Q4. A Q5. B Q6. B Q7. A (I assume weight x is heavier?) Q8. C Q9. C Q10. D

[@aldoquiroz7965]

Why not said the answer right after the question......🙄 Some ppl need to study as fast as possible. Makes no sense to me

[@evelynkariikamajova7743]

1.b 2.a 3.1 4.a 5.c 6.c 7. b 8.a 9.3 10.d

[@CareerVidz]

Hi, Thank you for submitting your answers for this video. Take another look at Q1 and see if you can get A as the correct answer. Give Q2 another go and see if you can get B as the correct answer. Take another look at Q3 to see if you can get D as the correct answer. Give Q5 another look over and see if you can get B as the correct answer. Q6, take another look at this one and see if you can get B as the correct answer. Give Q7 another go and see if you can get A as the correct answer. Take another look Q10 to see if you can get B as the correct answer. All the other questions you got correct good work!

[@beatricewilliams3320]

1. A, 2. B, 3. 4, 4. C, 5. B, 6.C, 7. B, 8. B, 9. 4, 10. C

[@CareerVidz]

Thank you for your post and answers, Q1,2 and 5 are correct. Would you like to try the others again.

[@MsTdub12]

Hello, can you please explain question 8....I thought the first pulley system was a 2:1 and the second system is a 1:! (with the pulleys just being a change of direction?)

[@anjeninebrown]

1A... 2A... 3D... 4A... 5C... 6C... 7B... 8A... 9D... 10C Please reply soon

[@CareerVidz]

Take another look at Q2 and see if you can get answer option B. With Q5 see if you can get the correct answer of B. Give Q6 another go and see if you can get the correct answer of B. Take another go at Q7 and see if you can get the correct answer of A. Q9 would be C, take another go at this one and let me know how you get on. Give this one another go and see if you can get the correct answer of B for Q10. All the other questions you got spot on!

[@shaniekcox]

My answers: 1A, 2A, 3D, 4C, 5B, 6B, 7A, 8A, 9C, 10D

[@johnooost]

@Paiton Pires Can you explain the process of how you calculated question 4? Thanks.

[@patrickjavier3841]

@@johnooost summation of moment at your reference point. 10(75kg) = 20(37.5kg)

[@patrickjavier3841]

Summation must be zero or the two moments should be equal

[@patrickjavier3841]

@Paiton Pires 10 should be B

[@chrisrhudy2000]

My answers are from 1 to 10 and they are A,A,D,D,B,B,A,B,C,C

[@CareerVidz]

Other than Q2, 4, 8 and Q10 your answers are correct. Would you like to try the others again?

[@ANKITSINGH-gc1jw]

Please post the correct answers. You don't know the answers, do you??

[@CareerVidz]

Hi these are the answers to the video: Q1: A Q2: B Q3: C Q4: A Q5: C Q6; B Q7: A Q8: A Q9: C Q10: B

[@ANKITSINGH-gc1jw]

Thank you !

[@wagwan6248]

CareerVidz I got only 1 right 🤦🏽‍♂️

[@RyanThomas96]

Q1/A 2/A 3/4 4/A 5/B 6/B 7/A 8/A 9/3 10/150

[@CareerVidz]

Great answers Ryan! Just have another go at question 2 :)

[@martinwipf4614]

On Q5 how can either one of these tanks empty they are plugged on bottom

[@matthewwiens5064]

left valve is open. right valve is closed. Therfor right side tank will not empty.

[@warmasteracejoker4026]

1 A 2 B 3 D 4 A 5 B 6 B 7 B 8 B 9 C 10 C Answers please

[@CareerVidz]

Hi, Thank you for your answers to this video! 7 out of 10 here, good work! Take another look at Q7 and Q8 to see if you can get A as the correct answer for both of these. Give Q10 another go and see if you can get B as the correct answer.

[@mateyosasfaw]

1A, 2B, 3-3, 4A, 5B, 6C, 7C, 8A, 9-3, 10C

[@CareerVidz]

Hi Mateyos, great attempt! But have another look at questions 6, 7 and 10

[@damonj3871]

@@CareerVidz I feel like 3 should be D...Explanation why this is not the case?

[@davincci2268]

@CareerVidz can you please explain question 10 to me now? Because I have a test within 3 hours from now

[@CareerVidz]

Sure no problem, here is my explanation for Q10. This type of pulley system has a mechanical advantage of 2. Therefore, to lift the 75 kg weight will require 75 kgs ÷ 2 = 37.5 kgs. I hope this is most useful to you! I wish you the best of luck for your for your test.

[@davincci2268]

Thank you Mr. I am very grateful 🙏

[@quychang4471]

​@@CareerVidz I'm confused, in another pulley video there is no mechanical advantage to #10 and it only serves as a change of direction.

[@freshweezyboy1733]

That pully does not have 2 mechanical advantages @@CareerVidz

[@freshweezyboy1733]

you're correct@@quychang4471

[@princenuamah-w9x]

(1) A (2) Crane A (3) D (4) D (5) B (6) C (7) A (8) B (9) 3 (10) C

[@CareerVidz]

Thank you for your answers. All correct apart from Q2, 4, 6, 8 and 10. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊

[@egamez1]

1. A 2. C 3. D 4. A 5. B 6. B 7. B 8. A 9.C 10. B (Which ones I have correct?) Thank you.

[@CareerVidz]

Hi Edwin, you got most of these questions correct! Excellent work :) Would you like to have another go at Q2 and 7?

[@ms0708]

I'm 10 and I got all the questions correct ( with a teensy bit of help from my mother )!! Love your videos :)

[@CareerVidz]

That's awesome! Well done.

[@phillipmalone186]

1.A 2.A 3.4 4.37.5 kg 5.B 6.B 7. This one is hard because I can’t tell if the line is longer on the right or not. And I don’t know how much more x weighs than z. I can’t decide between A or B but my hunch is A. 8. Answer B (pulley A requires less force) 9. 3 10. 37.5 kg

[@CareerVidz]

Thank you for your answers. All correct apart from Q2 and 8. Well done. Please would you subscribe to my channel? I'd appreciate your support. Thanks!

[@pat151uk]

1 - A 2 - A 3 - D 4 - A 5 - B 6 - B 7 - A 8 - A 9 - C 10- C

[@jayleesavage9780]

Isn’t number 10 b? Bc of the pulley system has a mechanical advantage of 2. Therefore 75 divide 2 is 37.5? ?

[@sharduljadav5699]

Q1-A Q2-A Q3-D Q4-A Q5-A Q6-B Q7-cant say Q8-B Q9-C Q10-C.

[@CareerVidz]

All correct except for the following: 2, 5, 7, 8, 10

[@DuncanRossGG]

1.A 2.C 3.C 4.D 5.B 6.B 7.A 8.B 9.D 10.B

[@CareerVidz]

Thanks for your answers, Duncan :)

[@mairabriseno5940]

1. A 2. B 3. 4 4. A 5. B 6. C 7. A 8. B 9. B 10. B How'd I do?

[@CareerVidz]

Thank you for your answers. All correct apart from Q6, 8 and 9. Well done. Please would you subscribe to my channel? I'd appreciate your support. Thanks!

[@awellmusik2376]

q1 -a q2-a q3-d q4-a q5-b q6-b q7-b q8-A Q9-C Q10-C

[@lavoxii]

Why can’t you provide answers?

[@Rezashah21235]

mark got it all right look at his answers

[@PuiiZo]

1-A, 2-B, 3-D, 4-A, 5-B, 6-B, 7-A, 8-A, 9-C, 1O-B

[@xiaomuhuang3768]

both the same Question 2

[@shaneodrisceoil4179]

My answers 1b, 2c, 3b, 4d, 5b, 6b, 7b, 8b, 9c 10b.

[@CareerVidz]

Hi, Thank you for submitting your answers. Take a look at my answers below and see which ones you got correct. Any you got wrong have another go at them and let me know how you get on. Q1: A Q2: B Q3: D Q4: A Q5: B Q6; B Q7: A Q8: A Q9: C Q10: B

[@user-od9xe5oy5s]

Why is B the answer to question 2 and not C ?? Imo it would be B if the weights were both equal

[@ramalakshmic5958]

CareerVidz i think 8 th que ans will be A

[@streetasian5178]

A.B.C.A.B.B.A.A.D

[@CareerVidz]

Well done - did you enjoy tackling the Mechanical Reasoning Test questions? Thanks, Richard

[@favourites613]

1 A 2 A 3 D 4 A 5 C (because the pipes are blocked unlike the pipe at the base which is open in the T junction) 6 B 7 A 8 B 9 C 10 B

[@CareerVidz]

Thank you for your post and answers. Q2, 5 and are incorrect. Would you like to try these again?

[@seh_one]

ABAACBAA

[@CareerVidz]

I would have another look at your answer for Q3 to see if you can find the correct answer. 7 out of 8, Well done! Keep it up :)

[@wagsoman]

Q1. A Q2. C Q3. D Q4. A Q5. B Q6. B Q7. A Q8. B Q9. C Q10. B

[@mattyoliverrrrr]

A Same 4 37.5 Not sure B C A 1 37.5

[@tiktokcommunity5091]

Q1-B Q2-B Q3-C Q4-A Q5-B Q6-A Q7-C Q8-B Q9-A Q10-B it this correct sir ?

[@MrCrisp_]

1. A 2. B 3. D 4. D 5. B 6. B 7. A 8. B 9. C 10. D Hopefully I did ok on this even though I have no real knowledge on this

[@CareerVidz]

Hi there. You got 7 out of 10. Nice work!

[@VijayKumar-fo8qr]

Answers are 1.A 2.B 3.C 4.A 5.C 6.B 7.A or B 8.A 9. C 10.B I thick these are write please check the answers And wrong answers Please mention the right answer Thank you sir

[@CareerVidz]

All are correct apart form Q3 and 5. Would you like to try again. Q7 is A.

[@itzyryeji3164]

Q1. A Q2.A Q3.C Q.4 A 5. C

[@CareerVidz]

Hi, Thank you for your answers to this video! Q1 is A, Q4 is A. Take another look at Q2 and see if you can get B as the correct answer. Give Q3 another go and see if you can get D as the correct answer. Take another look at Q5 and see if you can get B as the correct answer.

[@farazal4473]

A C D A B B (7 If X is bigger? answer is A) B C B

[@adamdoshlakiev2376]

Farazal I have the same answers bro

[@muhammadandry4941]

im answer Q1.A Q2.A Q3.C Q4.B Q5. C Q6.C Q7. B Q8.B Q9.D Q.10 D

[@asanchez2974]

A,C,C,A,A,C,b,B,B,B ?

[@mohammadimranqamar8512]

Q3 is C

[@CareerVidz]

Take another look at Q3 and see if you can get D as the correct answer.

[@michaelkelly5038]

1A 2B 3 2 4A 5B 6B 7A 8A 93 10B

[@CareerVidz]

Almost all correct here, have another go at Q5 as you are not to far off the correct answer.

[@michaelkelly5038]

That's for the reply. For question 5, would the stop cock for B not be kept shut due to the water pressure pushing the bar against the block, denying access to water escaping whereas for A the bar is not impeeded and opened by the water pressure? Please correct if I am mistaken!

[@CareerVidz]

@@michaelkelly5038 Hi Michael, Yes you are correct, my apologies for the mix up. Very good explanation along with the correct answer of B.

[@que0711]

A, A, 4, 150kg , both the same, point C, B, BA, tool 3, 150kg

[@michaelgrubbs1618]

My answer is what a jip. Maybe you're just reading and don't even know the answers. Love these tests I hate them when you do them though. Give the answers

[@natsirk2318]

WHY IS THERE NO ANSWER?

[@leunam1leunam172]

My answer is: 1.) A 2.) A 3.) D 4.) A 5.) C 6.) B 7.) B 8.) B 9.) A 10.) C

[@freshweezyboy1733]

for question 10 its C. There isnt 2 mechanical advantages like you said to others

[@CareerVidz]

I am sorry, that is not the correct answer. Would you like to try again?

[@freshweezyboy1733]

@@CareerVidz can you explain

[@ananya1616]

1. A 2. B 3. C 4.A 5. COULD YOU EXPLAIN ? HOW ? 6.B 7.B 8.B 9.4(C) 10.15(A)

[@CareerVidz]

Your answers are correct other than Q3, 7, 8 and 10. Would you like to try these again?

[@thomasc1830]

For question 5, there are two one way valves in the schematic. The valve under tank B is oriented in such a way that it will be closed by fluid flowing from tank B. The valve under tank A on the other had would be forced open by flow from tank A

[@Trains4Fun]

A C D A A B B A C C How did i do?

[@CareerVidz]

Hi, you did well for these questions, 6 out 10. Take another look at these ones below and give them another go to see if you can match my answer. Q2: B Q5: B Q7: A Q10: B

[@Trains4Fun]

@@CareerVidz Thanks I'll review my answers.

[@zak12i]

Q2 Crane B

[@CareerVidz]

B is the correct answer to Q2, Good start so far!

[@zak12i]

Thanks

[@conorw7604]

A,C,D,A,B,B,A,B,C,B ??? Please tell me exactly how many I got wrong

[@ithabelengsebilo7263]

Q1) A Q2) B Q3)A Q4) B Q5) A Q6) B Q7) B Q8) A Q9) C Q10) B

[@CareerVidz]

Thank you for your answers. All correct apart from Q3, 4, 5 and 7. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊

[@pc_pedros_music4thesoul779]

A, same, 4, 37.5kg, B, b, a, a, 3, 37.5kg

[@CareerVidz]

Q1 correct Q2 try again Q3 correct Q4 correct Q5 correct Q6 correct Q7 correct Q8 correct Q9 correct Q10 correct

[@PullthaleverKronk]

I got all 10 correct- nice :D Helps that I watched videos about mechanics some months ago

[@oliverosjevyp.6363]

Q1-A Q2-B Q3-D Q4-C Q5-B Q6-B Q7-A Q8-B Q9-C Q10-B

[@CareerVidz]

Other than Q4 and 8, your answers are correct.

[@tensayesahlu7699]

1-A 2-A 3-A 4-A 5-B 6-B 7-A 8-B 9-C 10-B If you want to get 10/10 here are the answers

[@CareerVidz]

Most of your answers are correct. Great work 😊 Would you like to give Q2,3 and 8 another go?

[@2012MrRiley]

A,A,4,A,C,B,C,A,3,B

[@CareerVidz]

Can you please advise the question numbers?

[@2012MrRiley]

Sorry, question 3 is it D? And question 9, is it C?

[@2012MrRiley]

@@CareerVidz is question # 3 answer C? And question #9 answer D?

[@staceybodine2153]

Question 1. B

[@CareerVidz]

Please try again :)

[@tomking-im2vn]

Q1) A Q2) B (C) Q3) D Q4) A Q5) B Q6) C (B) Q7) B (A) Q8) A Q9) C Q10) B

[@CareerVidz]

Thank you for your answers. Q6 and 7 are incorrect, but the others are correct. Well done. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊

[@dougkrahn5078]

answers are as follows: 1-C, 2-B, 3-D, 4-A, 5-B, 6-B, 7-B, 8-A, 9,-C, 10-C

[@CareerVidz]

Thank you for your answers. All correct apart from Q1, 7 and 10, well done. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊

[@magotommetle1329]

Q1=A Q2=A Q3=4 Q4=A Q5=B Q6=C Q7=A Q8=A Q9=3 Q10=D

[@CareerVidz]

Hi! Thank you for your comment. Most of your answers are correct. Well done😊 Would you like to try Q2,6 and 10 again?

[@manojalagonda2049]

How many of the corner wheels will spin anticlockwise if the string were pulled up?

[@CareerVidz]

Can you advise which question you are referring to?

[@LordSlate]

1-C 2-A 3-4 4-D 5-B 6-B 7-B 8-B 9-C 10-B Neat

[@CareerVidz]

Q5,6,9, and 10 correct! Well done!