I've made an Airless Tire like Michelin UPTIS, using windshield sealant

I've made an Airless Tire like Michelin UPTIS, using windshield sealant
• I've made an Airless ...
After Michelin revealed the Demonstration of this new Airless Wheel Technology, I made my own Airless tire.
In my first attempt to make a car tire out of silicone, I used 40 cartridges of acrylic sealant, and the experiment failed :))
In the second attempt, I used a windshield sealant, one cartridge cost 9.99$, and I've used 43.
If you wonder why I did this, the answer is just for fun.
In the first attempt to make a tire, I put the Acryl on the rim in 2 hours.
In the second attempt, I put just 2 cartridges a day it took 20 days to put the silicon on the rim and another one month to let it dry.
If you want to see more videos like this one, write your idea in the comment section.
If you are from Europe, you can order our first car care products from here 👉 carhax.com 🔥🔥🔥
Just a friendly reminder to hit that notification bell, so you never miss a beat of our fantastic content. Thank you for being a part of our community!
Watch also our best experiments:
How hard is a normal car glass compared to Tesla 👉 • How hard is a normal c...
Brake rotors out of Lead, Aluminium, and Copper 👉 • I've made brake rotors...
Defrost your windshield in seconds with this trick 👉 • Video
Tire made out of coca-cola, toilet paper, & sawdust 👉 • I’ve made a tire out o...
I've made a Crazy Cart from a shopping cart 👉 • I've made a drift Cart...
GoPro Inside a CAR TIRE (TIRE vs. 100 NAILS). 👉 • Can This Tire Survive ...
I've made an Airless Tire with windshield sealant 👉 • I've made an Airless ...
Watch also:
Mechanical Problems Compilation [Part 27] 👉 • Customer States & Mech...
Mechanical Problems Compilation [Part 26] 👉 • MECHANICAL PROBLEMS CO...
Mechanical Problems Compilation [Part 25] 👉 • Mechanical Problems Co...
Mechanical Problems Compilation [Part 24] 👉 • Mechanical Problems │ ...
Mechanical Problems Compilation [Part 23] 👉 • Mechanical Problems [P...
Mechanical Problems Compilation [Part 22] 👉 • Mechanical Problems Co...
Here are some cheap tools that I use daily in my workshop:
Plastic removal tool:
-11 pieces removal tool set (I have bought this one for almost 3 years and I still use it)
s.click.aliexpress.com/e/basZfJg8
-22 pieces of a removal tool set
s.click.aliexpress.com/e/_d8Y...
-7 pieces of cheap removal tool set
s.click.aliexpress.com/e/c5FEA6Uo
Torx:
-Torx Screwdriver Set from T5 to T30
s.click.aliexpress.com/e/cdIOzPBK
-Long torx Screwdriver T15 T20 T25 T27 T30(use torx t20 to remove the car exterior door handles almost all cars have this screw)
s.click.aliexpress.com/e/cDOzHHLw
Small Electric Drill Cordless Screwdriver:
s.click.aliexpress.com/e/iAkSGXm
Hooks:
s.click.aliexpress.com/e/bGDvRimM
Flexible Magnetic Pick-Up Tool:
s.click.aliexpress.com/e/btR4NInm
Rubber Eraser disk:
s.click.aliexpress.com/e/_Bf9... (I use this to remove old Stickers and double side tape left on the car after I remove badges)
LED Flashlight:
s.click.aliexpress.com/e/CbIfLBK
Infrared Thermometer:
s.click.aliexpress.com/e/_d61...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
#Airless #Tire #Michelin #testing

[@HunterXray]

An idea similar to this might be good for spare tires. So you don't have to worry about checking the air pressure in the spare and then if you forget to check it, you aren't surprised the spare is flat when you need it most.

[@GregoVal]

I have a 12v mini compressor in the trunk

[@Fit4C]

Jesus loves you alot trust in His death 4 salvation and be saved from eternal hell

[@101alexs]

Huge respect for sweeping the road clear of the acrylic.

[@Guest-zm9sj]

Press f for repsec

[@RimKWithoutTheK]

@@Guest-zm9sj ffffffffffffffffffffffffffffffffffffffffffffff

[@kanedillon4107]

i know Im randomly asking but does any of you know of a way to log back into an instagram account..? I was stupid forgot my account password. I would love any assistance you can offer me!

[@israelwesley9051]

@Kane Dillon Instablaster ;)

[@kanedillon4107]

@Israel Wesley i really appreciate your reply. I got to the site thru google and I'm trying it out atm. Seems to take quite some time so I will reply here later with my results.

[@jesuschrist2886]

Round of applause for this man, for how many hours it took to even make this video.

[@kylerwinters]

Good thing this channel took his video and claimed it as their own.

[@wh4tevercomest0mind41]

Obviously it only took him 10:33 barely even a half hour

[@ahyaan2552]

@@wh4tevercomest0mind41i hope you are joking

[@wh4tevercomest0mind41]

@@ahyaan2552 run yah pockets

[@roblosdoge]

@@wh4tevercomest0mind41 basically 10 mins for the video isnt like it he sped it up and 10 mins is equivalent to 2 hours.

[@wiggy8912]

This man just invented the 100% frosting only cake.

[@simongoodridge6068]

That looked like hard work, but the end result amazed me, it stood up to the tests better than i could have imagined. Nice job

[@allensandven0]

Take it to Bonneville !

[@peterzingler6221]

Goes to show how incredible strong windscreen adhesive is

[@hughstephenson2957]

I use it to put side trim on the 80s cars I work on..

[@Steel-toad-Jack]

I use it to put wind screens on

[@raymondg.3173]

"Real life test": proceeded to do a burnout 😂

[@yoanirribarren5866]

😜

[@ESISTTIGER]

Yeah raymond didn’t you know every time you take off your meant to spin em up we’ve all been driving wrong

[@swapnilyadav4024]

Seriously 😂

[@theguruofyourfatherthataba9604]

No Its Launch Control

[@Fade2278]

“Burnout”

[@teamidris]

That did a lot of good things I didn’t expect. Like sitting up when it started rotating and having excellent self-damping.

[@marventhedepressedrobot4656]

The problem is that the tire is very expensive and and has a lot more material which does not help pollution, and it cannot go so fast because if it does then it can tear from the traction with the ground

[@jasonseigfried8941]

Those held up surprisingly well. Looks like you've got a decent temp spare now

[@mayh3xx]

When your tire blows and the closest shop is home depot

[@shadgrind]

😂

[@ucheucheuche]

In years to come, all tires may be like this. Comments will then applaud this maverick for such vision and research.

[@shadgrind]

Michelin are developing a tyre to be ready for 2024

[@Luckykhan1993]

this is called passion of engineering work

[@luiszepeda2525]

Engineers have to contemplate physics in what they are doing

[@zinedine2751]

10:10 respect 👏

[@masmainster]

It would be fine for something like a warehouse fork lift or something that never went over 10kph, when the tyre wears down you could just add more sealant.

[@swecreations]

That you actually balanced it too! I lolled at the tire weights there haha

[@nj1255]

Held up way better than I thought it would!

[@mikem8093]

Holy crap NASCAR is coming for you to make their tires!!! Good job!!!!

[@niteraven7333]

One day we might hear about you again when you make it big with your inventions. Pretty cool

[@taimoorshah8230]

I would totally buy an airless tire like this as an extra wheel of course professionally made with advance technology not with windshield sealant. But concept is amazing.

[@shadgrind]

A little bit of research and development, and you could easily is these tires for a number of applications.

[@georgioocean7629]

The actual tires cost cheaper than that glue

[@michaelg7904]

Georgio Ocean That tells us how overpriced a tube of caulking really is.

[@toheedsultan8263]

Ok boomer

[@watersheep9507]

According to the description it ( sealent) is worth about $430

[@StrokedGT]

@@toheedsultan8263 you still say that?

[@sammyd7857]

Obviously

[@killerdinamo08]

Loved the 'real life test', it made perfect sense :))!

[@inverted311]

Really cool he cleaned that up... That’s a stand up guy right there 🤙🤙

[@pickledpigknuckles6945]

Probably the best home made tire ever I have seen

[@shadgrind]

Add a tread pattern could be brilliant.

[@leofibonacci.]

As vezes desafios diferentes custão erros inesperados, mas a persistência eleva sua sabedoria! Parabéns!

[@ramasamyvijayaraghavan6540]

Give him a hand of applause...

[@handyhippie6548]

if you let each layer cure before applying the next it might actually be a viable method to make an airless tire. come the pockyclipse, i'll have to try it.

[@raijin7707]

Please update me on the results when you've completed this project. I'm thinking about trying this idea for my e-bike.

[@mustafabahaj9832]

Your patience is admirable.

[@blakeholder1017]

It's cool that you made that yourself and it actually worked that well!

[@repeatagain1789]

Very good that's how inventions are accomplished trial error and dedication!

[@ssss-df5qz]

Police man: "These tyres are under the legal limit for tread" **gets silicone gun out**

[@EuropaWill]

Fantastic Outro!

[@torpidparakeet9362]

Thanks bro, I cracked the hub on one of my e-scooters and now it won't hold air when tyre is fitted and I'm far too poor ATM to replace hubmotor. your video just made my day, literally in the parking lot of autostore about to stock up on "magic tire goo" 😉

[@shadgrind]

You go for it!

[@ryd1977]

Great concept, experiment and trial video. Keep it up!

[@ephramrafael7140]

5:49 I lost it at the pile of tire weights as the wheel rotated around...

[@shadgrind]

C’mon man, he knocked it up using ‘black acrylic’ I have just seen the Michelin test, now if you were to do a more precise job using a more measured approach, then this could seriously work, for someone, just ‘having a go’ I am amazed, as far as the comments of it not being round enough, just think of the increased contact patch. Get a tread pattern bonded to it and you have a winner I am massively impressed by this even working. I mean a burnout and it didn’t fly apart!

[@lukemanius]

I like that you swept at the end

[@grrbrr5290]

Actuall car companies should learn from how this guy did a whole section of real life tests which mainly consisted of burnouts

[@victorpatterson719]

That is really amazing man. I hope to see your work in the future in stores

[@shadgrind]

@Funny Stranger This could easily be ‘engineered’ in to the tyre depending on materials used. Imagine, no punctures!

[@mikebronson9670]

Thanks for taking the time to make this video, I really enjoyed it.

[@vinayakpatil355]

Me- Mom make me a Windshield sealant only cake this time on my birthday. Here's the recipe.

[@user-nf7ur4yb2q]

I think this gentleman can be a good pastry chef.

[@Black.Badger]

I feel bad about him cz all the struggle was in vain in the first attempt... Well done BTW

[@aharrisbham]

If my jack made that noise letting it down I'd be in bed with it.

[@MotoRiceVN]

Nothing can compare to the Michelin airless tire if it doesn't have that satisfying shock absorbing structure but I appreciate the effort 👏

[@cactus7385]

Congratulations my dear 👍👏good works..

[@Freekniggers]

10 years later it still hasnt finished curing

[@yawangle90]

exceptional lateral stiffness of the (non-existent) sidewall, resulting in the superb camber control

[@therealgerold]

9:25 wow, really impressive, got yourself a winner here; that airless tyre sprung up like a real air one. Maybe an idea to design a 3D printing program for this to save yourself time if you'd ever go big market with this one. I'd say, somehow stick a tyre tread around it, that'll take care about your wear and your dealings with wet conditions and whatnot. In the future also off road tyres like these available?? I hope to see more of this.

[@swirlingbrain]

Totally just as good as some retread tire shops around where I live! 😱😬😱

[@techboy95]

Nice video! A follow-up with 4 tires, maybe a bit more material, a more round tire if you can make one, and a lot more footage and testing with usage would be amazing!

[@gunpringer2342]

That was cool, but seems like common tires more durable than glue tires

[@blacklight481]

thats why all that is needed to be done now is to add a conventional tire layer to roll on the ground.

[@pineappleboi27]

Bruh obviously this was just for fun🤦‍♂️

[@marventhedepressedrobot4656]

@@pineappleboi27 bruh obviously it was a joke 🤦‍♂️

[@SucceedbyForce]

Impressive for only 2nd attempt!! 👏

[@elvisstarlord7121]

That is just crazy! But thank you so much for the share . It was very cool to watch respect!

[@Georgesaltas]

perfect tire to put it on the market does not pop if pierced holds for a long time a good patent

[@stun9771]

Layers of hessian, and expanded steel between layers would have been good...

[@AACP25]

worked better than i expected XD

[@zain9882]

You gotta give him credit for the effort, I mean 30 days to dry 💯.

[@afrosamuri05]

Use it as a spare tyre, cuz at least you don't have to remember to inflate it like most of us forget to.

[@shadgrind]

Fucking Right!

[@Zachchase76]

Hillarious when he walked in the the first one like it blew its own brains out

[@scoutsapp5624]

@Zach Chase oh my gosh that’s my favorite comment on KZbin 😂

[@executive]

At least you will never get lost. Just follow the trail it leaves all the way back home

[@Rojao]

Amazing test, tks 4 share!

[@alfredhmr3364]

The movement of the tire spinning while transmission driving looks uneven. Much improvement is required. Welldone! Try more something with patience. Success will results at the end of more attemps made by you. Full support. Try to test the durability. Try to know how long it could last. You'll surely have the patent ownership. Wish you best of luck.✌👍🙏🌹

[@effreyjeppstein4673]

I feel like 3d printing is the future of this tire type

[@pbaklamov]

Hi Epstein, how is Israel? Thanks for letting us know who whistle faker is

[@raymiemac71]

It's just like filling the tyre with tyre weld but with out the tyre.. Good effort.

[@atomicsquirrelproductions6662]

Interesting...I do like the fact that he cleaned up the debris vs just leaving it there to be washed in the sewer.

[@TET2005]

6:53 Oh shit... this looks and sounds like a tank moving...

[@Manhotocu]

The tire is beautiful. It costs a lot of glue, huh. I like your way

[@Quagigitymire]

that's a really bold title man... im certain the engineers at Michelin will appreciate the comparison after seeing your on par craftsmanship.

[@SingingSwampPossum]

Nice job man one of the cooler vids I've seen in a while glad you didn't give up I'm sure it wasn't cheap 😂

[@VishalJdhv]

Keep experimenting untill u get to the level of Michelin tires..good luck

[@Youtubeforcedmetochangemyname]

That held up a lot better than I thought it would

[@outdoorbikingbrothers5223]

Appreciated for your experiment and effort

[@tea4223]

This is a great idea for riding mower tires and wheelbarrows.

[@Beaverj420]

Now for the 60-0 mph brake test.

[@jeffreyhull7784]

I bet your arm looks like Popeye's now.

[@varman001]

excellent experiment!

[@alejandroariola9459]

bueno yo no ablo ingles pero siempre tus videos los miro dios te vendiga y tambien al que este viendo esto

[@racer67]

This is originally wat utube was made for! And ofcource cats!

[@raspiankiado4658]

We'll ignore that dogs are looked up more than cats.

[@racer67]

@@raspiankiado4658 ha really n where do u get that info from,,"fk dogs" they stink n smell like shit period point blank! n thats a fact!

[@bobordewald1367]

These would be great for use in a salvage yard. It seemed like we popped tires every other day on our yard cars

[@crimescene25]

this would last maybe a day tops on any vehicle lol.

[@lopezlopez7132]

Very useful. If you find yourself on the road without a spare tire, you can make one like this and 30 days later continue your voyage...

[@ullasbabu1732]

Or you can go tap rubber trees.

[@Islamic7636]

Outstanding bro keep it up👍🏻

[@Snadzies]

That was every bit as dumb as I hoped and I love it.

[@shadgrind]

Who is going to be laughing when I drive a truckload of nails?

[@xrismanessa3993]

Bugatti need your contacts as they want a Chiron 600 km tire. Pass with flying colors

[@DarkCloudll]

Oh he's making a cake, man that's not hard!

[@autobez3132]

Am doing this to all my wheels lol awesome video

[@velocisstarrle4480]

People think this is the most stupid thing ever which is just a waste of money and waste of time ! But wait I think it's a good expirement bcuz no one had ever done this before. So, thanks

[@TheDrakenZ]

people have definitely done this before, you can see their work on skid steers... they have solid rubber wheels too hahaha

[@narancs5]

This thing you are calling airless tyre is in fact a solid tyre, and it is at least a 100 years old idea.

[@deputydillhole]

I believe they did it in cross patterns to allow air bubbles for cushion...which makes it technically not airless or solid....the Michelin tires are technically solid since there is no sidewalls to trap the air

[@cynthiaayers7696]

Well, isn't a solid tire airless?

[@Riley_Edgar25]

Booger Eater there will be sidewalls they just did that so you can see how it works because if there wasn’t sidewalls rocks and ice and other thing would get in there

[@deputydillhole]

@@Riley_Edgar25 but if it's sealed then it's not really airless, the air just isn't compressed

[@Riley_Edgar25]

Booger Eater I think the idea of it is that you won’t have to fill with air ever

[@arvinddhiman8706]

i respect your Dedication man 😊👍👍

[@robertogermanoanders7840]

Bela iniciativa! Gostaria apenas de sugerir que se o fizer novamente, corrija a circunferência e faça o balanceamento da roda. Gostaria de ver se seria possível fazer com polímeros que hoje apresentam um entrave ao meio ambiente. Obrigado e um abraço!

[@salemsabah6993]

Your idea is amazing but you need something to protect the last layer like a normal rubber tire

[@Carhax]

I've made it just for fun but thanks for the advice

[@shadgrind]

@@Carhax Proof of concept

[@TVBlindBonsai]

@@Carhax How do you Uploaded this Video is 3 Months later?

[@Carhax]

@@TVBlindBonsai what do you mean?

[@alexlribeiro]

Congratulations, excellent, a tip try to lay some fiberglass layers, or do with 3d printer (ABS) with fiberglass layers, I made it to Bike and it lasts a lot. hug

[@oliverlee666]

Good idea sir !!! Appreciate Greetings from Indonesia

[@tahabuddy4508]

Thumbs up for your hard work 👍👍

[@Ibaddhusain]

good concept

[@marciobragaolivieri5877]

Simplesmente incrível a resistência do material. No Brasil é difícil encontrar...

[@Fit4C]

Jesus loves you alot trust in His death 4 salvation and be saved from eternal hell

[@stefdnk4428]

Looking solid! 😝

[@DefaultName-jf5nd]

It's a great idea as a spare tire.

[@thomashenden71]

His hands must have hurt because of all the pumping of those sealants... :-o

[@AmaroqStarwind]

You should try making a wheel that drives itself.

[@instantjustice164]

Brilliant! we should call this 👍👍👍

[@subscribeowikd3336]

Wow! You deserve a Nobel