Mechanical Problems Compilation [Part 11] 10 Minutes Mechanical Fails and more

Mechanical Problems Compilation [Part 11] 10 Minutes Mechanical Fails and more • Mechanical Problems Co...
Submit your Mechanical Fails, Customer States, Dashcam videos, or other automotive-related content here 👉 carhax-video-s...
❗(Our editor will make a selection and not all the videos are posted on CARHAX KZbin Channel)❗
👉 Music for your videos. 👉 bit.ly/2OrXhPH
👉 Check any car's mileage and accident history here 👉 bit.ly/3b6S8pI
Please leave a like and subscribe to watch our following videos. Also, let us know what you think in the comments!
Here are some cheap tools that I use daily in my workshop:
Plastic removal tool:
-11 pieces removal toolset (I have bought this one for almost 3 years and I still use it)
s.click.aliexpr...
-22 pieces of a removal tool set
s.click.aliexp...
-7 pieces of cheap removal tool set
s.click.aliexpr...
Torx:
-Torx Screwdriver Set from T5 to T30
s.click.aliexpr...
-Long Torx Screwdriver T15 T20 T25 T27 T30(use Torx t20 to remove the car exterior door handles almost all cars have this screw)
s.click.aliexpr...
Small Electric Drill Cordless Screwdriver:
s.click.aliexpr...
Hooks:
s.click.aliexpr...
Flexible Magnetic Pick-Up Tool:
s.click.aliexpr...
Rubber Eraser disk:
s.click.aliexp... (I use this to remove old Stickers and double side tape left on the car after I remove badges)
LED Flashlight:
s.click.aliexpr...
Infrared Thermometer:
s.click.aliexp...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
#MechanicalProblems #Copilation #Fails

[@Carhax]

Send us your videos/photos carhax-video-submission.com. Hope you enjoy the video

[@scottmichael3745]

I've been a mechanic for 29 years.. this is the "tame" side of what I've dealed with. Keep up the good fight fellas!

[@MalleusSemperVictor]

0:37 Hey, he engaged his safety squints.

[@AJBAXTER7677]

Yeah that one had me since I'm trying to get into welding myself. I kinda like my eyes more than he does his own I think.

[@TofsrudCubing]

that is a high risk of becoming blind. Always wear a welding mask and welding gloves.

[@mikaelafox6106]

Ironic how Ace of Base I Saw the Sign is playing in the background. 🤔😂

[@Dappersworth]

That guy is filling in the bearing lubrication holes for the oil. The engine that's being put in is fucking toast. Not to mention the integrity of the crankshaft being compromised from fucking WELDING it.

[@v3-mikey895]

He went in the back seat kind of

[@TheKimovitzh]

3:17 that’s the Jeep having the PTSD shivers from the war back in nam.

[@pnw.yfz350]

Mine is older and has more miles never ones did I get death wobble. And my suspension was gone

[@TwoBitty]

Called a death wobble, want to know fear? Go down a 20% grade in a fully loaded Chevy Express and a death wobble kicks in.

[@General_Eisenhower1945]

@@pnw.yfz350 mine is older than yours and it happened once and was easily remenised by tightening the bell crank doen

[@jordanbeck123]

That's a ford

[@xx412xxbluntz8]

Death wobble ain't no joke

[@adamgray1753]

At the 9:55 mark.... Mechanic: I think you may need new shock absorbers! Customer: C'mon, man! The least you can do is *STOP* further disintegrating them by rubbing them with a feather touch, man!!

[@徐鹏飞-q1m]

Relax

[@YourFavDieselTech]

Imma start a tool company where we just sell 10mm ratchets and sockets in a 4 pack. I’d be rich 😂

[@slayerjohn447]

I worked for a parts store, we did a challenge for shops, whoever bought the most in the week got a free socket kit containing 2 10mm sockets in it.

[@yzstormer]

10mm rachets? There no such thing as that but ok 😂

[@zacclarke8652]

@@yzstormer probably meant ratchet spanners.

[@yzstormer]

@@zacclarke8652 maybe.

[@South_Ga_mafia]

Yessss!!!

[@dues_vult9897]

1:15 when the Vtec kicks in

[@bigsebby3799]

Plot twist: G-forces in a nutshell

[@illiniguy34]

I died inside seeing the underside of that yellow Charger Hellcat.

[@Spelter]

Somebody needed a new frame or put a new engine in, so he kept it simple. If people on the street wouldn't be endangered, I would say "Fucking let them, Darwin was right, natural selection"

[@ever4437]

Things that make you go ehhhhh

[@kitchentrout5867]

I don't know why. Dodge fucking sucks lol. I'd sooner pay somebody to take me around in a rickshaw than own a Chrysler product.

[@Hacker07Gaming]

@@kitchentrout5867 lol they're garbage that's why they're dirt cheap.

[@logertgogert3227]

I didnt see a hellcat. I did see a yellow whale though

[@mysock351C]

4:38 Ah the aftermath of doing a "Dude, I think that's clutch" burnout.

[@josefbrunner6224]

clutch, what clutch

[@yungkidnf]

8:40 Karen: "Just dump the load in my trailer." Worker: "But ma'am it won't-" Karen: "JUST DUMP IT OR I'M CALLING YOUR MANAGER!!!" Worker: "Okay . . ."

[@prestondewhirst6602]

6:21 Please, just please change your oil at least once in the vehicles lifetime

[@sirinsanity4417]

But BMW tells you to do it every 15K miles ._.

[@warpey5632]

_Oil? What oil?_

[@user2C47]

@@warpey5632 _Olive_ oil.

[@FordGTmaniac]

6:38 Every time the commentators in NASCAR try to explain anything about how the cars work.

[@isaacsrandomvideos667]

Dustin heheheehe

[@tokyot3232]

When he said you just need a new car I lost it

[@rize_ivyyy6005]

Bruh I need to find this video

[@ArmyBoiSweat]

As someone who builds stock cars, they're mostly talking about the aero package, and they're normally pretty close to right

[@warpey5632]

_The _*_topinator._*

[@GixxerRider1991]

6:20 "I only have to change my oil every 10,000 miles!"

[@Nonexistent_creature]

That's DISGUSTING omg🤢🤢

[@cptmiller132]

nah that's more like a 50k miles per oil change

[@mateuszzimon8216]

@@cptmiller132 Thats long life.... U don't change this.

[@user2C47]

Then there's the car where the engine is permanently sealed. All service, such as coolant changes, must be certified OEM.

[@TheTHX1138lives]

0:37 NO EYE PROTECTION AT ALL. I can't watch this happening. Using your discount store wirefeed to booger-weld a crank is dumb, but when you roast your eyes and have blind spots in the center of your vision, it's gone to reckless.

[@adamgray1753]

This is why you do not use the Dollar Trees of the mechanic world, The THX1138lives.

[@sukmikehok2560]

@Patrick Wright That doesnt help

[@Rogan_Dorn]

@@sukmikehok2560 Can confirm. Your eyelids are not going to help against arc flash. People don't realize how unbelievably bright welding arcs are.

[@comando293]

@@Rogan_Dorn it's physically painful to catch a glimpse 50 yards across the shop, can't imagine how it feels at that range.

[@supnerd9149]

Dude just use safety squints. Helps me, now I can look at the sun without sunglasses

[@B00Gz73]

Bro I almost pissed myself laughing at the Japanese vs muscle car sounds! 💪🏾 2:50

[@melissasullivan1378]

Some people have too much time on their hands

[@outplayed_omny5800]

PH MY GOD THE 10 MM CLIP IS THE MOST ACCURATE CLIP I HAVE EVER SEEN DISAPPEARS INTO THIN AIR EVERY TIME AND THE GOD DAMN 8MM ALSO

[@徐鹏飞-q1m]

Relax

[@JayDee-xj9lu]

Including tape measures.

[@John_Makes]

7:52 i suppose the 122 rivets wasn't enough :(

[@downcastend11]

Hmm maybe 150?

[@Money.Flyzzz]

They where just screws

[@JayDee-xj9lu]

I saw someone pop rivet a spoiler to the boot with about 200 rivets. We called it a zipper. In full view.

[@lastsinner4606]

To be fare 121 just wasn't enough. Oh and 121 or 123 is just a weird number. 122 screws I would fire that guy immediately and take his tools!

[@medardodegraciajr8118]

7:12 I knew blinker fluid was real!

[@cadewaren6482]

Lol nice reference

[@SVTJD]

Chris fix doesn’t lie

[@keithlowe1982]

10:04. I'm not a mechanic, but, maybe, ... someone 'MIGHT' need a motor mount ? Just a shot in the dark.

[@kaiokendo]

8:46 this llaugh needs a factory recall

[@lunarpitch]

*spray bottle intensifies*

[@adamgray1753]

At the 0:00 mark my step father and I have had to do similar things over the years dealing with flat tires. What happened at 0:16 mark is our greatest flat tire replacement fears realized.

[@SpaceMissile]

been there done that. lol luckily studs aren't usually that hard to replace, but it's a total PITA when you're already dealing with a flat tire. ahaha

[@I5ZQ8]

I died at the American muscle sound lmao good shit.

[@tcb268]

Bang! Ping pang! Ping pang wang! 😅😅😅

[@ads1035]

AAAAAAAAAAAAAAAAAAAAAAAAA

[@adamgray1753]

Such clips help keep the Wuhan Virus away! lol

[@darkracer1252]

@@ads1035 i died at the muscle car XD AAAAAAAAAAAAAAAAAAAAAAAA

[@georgeullrich9086]

AAAAA AA A aaaaaAAAAAAAA

[@jdogmcnasty1980]

I had to stop the vid I was laughing too hard 😂😂

[@CaptainKerpa]

3:05 that killed me😂

[@adamgray1753]

Nothing like killing your vocal cords for some el oh els. Hah! Seriously though, that was a fairly accurate rendition of American muscle car engine I would figure.

[@gregorteply9034]

Yes, don't forget mental problems too.

[@KiraOniiChan]

I enjoyed that a lot haha

[@dragontalontsiawd]

I died laughing at both of them... That shit was hilarious

[@sto1asgoetia600]

Japan: big bong bang American: ąɧɧɧɧɧɧɧɧɧɧɧɧɧɧɧɧɧɧɧɧɧɧ!

[@dannyduncansdad8459]

I just feel like something is gunna go wrong with my car now.

[@inibrasiumthefirst2680]

Hahaha I drive 88 Chevy truck so it's like walking on thin ice, *hears a crack* shit shit

[@SMD-si7fm]

Inibrasium the first I drive an 83’ S-10, So factual.

[@nightmareinaction629]

2019 mustang so only 1 year old but I'm hoping no issues I take care of me car

[@greenscreen3347]

You know that guy at 8:40 was told it wouldnt fit. but hes like, I know my trailer son, I've been using it 20 years it can fit what I'm asking now do it! Customer is always right

[@cherriberri8373]

Man I've never had trouble with 10mm sockets. Nor has my dad- we only have one between us and we never lose it. But I have dropped a 6mm wrench into the engine bay of my taurus, to never see it again despite lots of searching, shaking, and quick accelerating and then sharp braking. The engine bay ate it

[@Slash1066]

That car at 2:22 was one of the craziest things I have seen, the whole front end is botched to hell and back

[@iamelitekai]

6:22 that is a night mare

[@trvshboi]

I watch these videos everyday to remind myself that there are a certain breed of car owners out there that I don't want to be driving near

[@scottmichael3745]

For all of you who don't know, the "Jeep thing" is a failed steering stabilizer. I've been a tech for 29 years. You're welcome.

[@bigtalk7490]

Scott your probably just as crap as these mechanic

[@Box69]

@@bigtalk7490 That was rude

[@theatomicbombv-2304]

team bruh tf?

[@bigtalk7490]

Call me rude when your driving down the road and your front wheels come off . Thank scout for that 29 year at it still cant tighten a bolt .

[@thecoolguy9364]

Ok?

[@shaunrobertson9203]

5:43...happens all the damn time!!!!

[@KGSpectrum]

Xddd

[@autobotjcb]

The part with the guy messing with the vents while he's screaming made it sound like he was trying to go Super Saiyan

[@manicmechanic448]

I've found both knives and bullets in tires.

[@ArmyBoiSweat]

I found a bigass bag of coke in all 4 tires back when i was working in texas near the border

[@Filthycasual123]

The worst thing I found was a 10 mil wrench amd I still use that wrench to this day lol

[@lucaalvarez6905]

Location, location, location

[@jake48396]

Lol I work at a tire shop and ive been very impressed by peoples dumbassity and crazy shit theyve dont to their cars

[@wesleycooper2647]

GTA V

[@Axonn5]

4:56 Dam what type of engine and vehicle is that? That growling start up sounds monsterious! Sick!

[@Filthycasual123]

I'm wondering y he same thing I wnana harat that thing straight piped

[@jacobg5122]

That's a big block V8, might be a 460 in an old Ford truck

[@Anonymoose345]

Chevy 357 I know that knock anywhere

[@donovanulrich348]

1:30 😂 That wind dampener now costs more on gas with that much extra weight genius 🤣

[@PotatoeJoe69]

8:38 I already know. That old guy was like "No, it'll fit in the trailer, I've measured it you knob end!" And the guy operating the loader was like "I'm telling you sir it will not fit." And the old guy was like "It will fit, I have paid for it now load it into my trailer!" And the operators like "If you say so. 🤦‍♂️"

[@draxoronxztgs1212]

This applies to those with, "If it's not broken, DON'T FIX IT!" mindset.😄 No service needed as long as it runs they say by that.

[@ItsCleto]

Gotta love that classic Jeep death wobble.

[@Expik_92]

10:09 - The End is BEST! :D

[@maje2610]

ive been going through a lot of these comp's and i have to say theres a LOT of ridiculous shit happening in the world of automobile mechanics 🤣🤣🤣

[@literallynothing8934]

Okay that civic and the guy just laying his seat back when he floored it was funny as shit

[@michaelchristmas923]

6:38 every mechanic that tries to explain non existent problems or fake problems to get money or would sell you a new car if they could.

[@PanameraTurboSEHybrid]

And certain service advisors trying to upsell.

[@RafikisAnts]

i almost pissed myself at the 10mm

[@Bsquaredplus2]

9:15 the dullest end is what punctured the tire? Hahaha!

[@EricNielsen187]

When I saw that I yelled "NO F'N way has to be fake" I had the EXACT same thing happen to my truck. The tire shop gave me back the side cutters and I still have them. That clip is not from my truck, I had Silent Armor trucks trucks.

[@davecrupel2817]

0:10 this is why i do my own wheels and lugnuts. I hate impact tools. Sincerely, An aircraft mechanic.

[@mrjbg2000]

Ford lug nuts have a known defect that causes them to rust and seize up

[@craigbrewer433]

After years of working on my own cars and doing some mechanic work as a job, i still cannot unsee some of the things ive seen. Had one tounger lady say her car started making a noise in the rear the day before. When we put it on the lift, her passenger rear tire and suspension proceeded to drop out from under the car. It was only hanging on by 1 bolt in the lower a arm.

[@MrTefe]

2:50 this is really a mechanic problem so big problem that it cant even drive

[@boneclubceo4531]

What?

[@YourFavDieselTech]

When he pulled that motor mount off at 2:00 I felt his pain. Mazda 3 owner here 😂

[@Livinlivin836]

Lmao at the loader giving the car his load asked for 😂😂😂

[@NotSoCrazyNinja]

I like to see when someone thinks there is either no problem or the problem is minor when it's actually a major problem. Like the "yeah, I ran over something sharp..." *wire snips in the wheel, handle first* "yeah, just a little noise..." *giant hole in the engine*

[@SpaceMissile]

yeah, like 3:25 lol

[@philthyphil3324]

The opening clip is why I don't let les schwab touch my vehicles ever again. Had a blow out 300 miles from home, broke 2 of 5 studs trying to get the lug nuts off.

[@damiengreen3772]

6:02 it's the lego movie all over again

[@cycodragon2412]

Adleast to the damages were easy to spot😆

[@fromach]

IIRC I broke 4 separate hangars for the end of my exhaust in the first year I had my truck.....and the coathangar I used as a quick fix is still going strong to this day 5 years later

[@Hawkers02]

I need help replacing my muffler in my 85 Chevy

[@alinutzalin6346]

6:05 So that's how I literally lost every 10mm socket, including: 1/4, 3/8, 1/2. Like wtf...

[@mjcboxer]

that 10mm gag is so true it hurts

[@IZO_9]

Come on guys, the car just wanted to give you peanut butter 9:36

[@verymelee9115]

Always remember to keep the air in your engine. Why does this remind me of something a Cadillac owner would say before a total engine replacement

[@jeffring1222]

When the guy did the butterfly injected hat linkage, sounded like Sam kinnison.

[@freddykruger1086]

The steel wirr trick is basically to make it to the garage without losing the whole pipeline.

[@drewjohnson4794]

Gotta admit the 10mm one was really funny.

[@yurunning5574]

6:38 ghetto chrisfix

[@rize_ivyyy6005]

Hahahahahahaha

[@Hawkers02]

So true

[@warpey5632]

_The _*_topinator_*

[@yurunning5574]

@@warpey5632 the power *stern* fluid

[@Thesillyboykisser]

warpey that’s what a girl is

[@coyotewindy4084]

9:00 Inflate the wheel 1.7-1.6 barrels. And notice, sprinkle the colia with salt. And there will be happiness. Надуйте колесо на 1,7-1,6 баррелей. И обратите внимание, посыпьте колия солью. И будет счастье.

[@Crvowner2022]

I feel like the guy at 6:40 is kidding but this is why people get mislead from car repairs. A mechanic will tell them they need all this stuff but it's not needed. I know that's how service shops make money so yall just keep on keepin' on 💅🏽

[@user2C47]

4:15 Once saw a car with coolant like that. It clogged up the coolant system, causing high pressure in the radiator and a blown head gasket. The vehicle was totalled and is now being converted into a simulator.

[@OVRxNxOUT]

Omg, the imports vs US sound had me rolling.

[@VikingArelius]

1:20 I remember when I was a lube tech at a Hyundai dealership and we got a custom Hellcat Challenger in (car was bought at the dealership with an unlimited oil change policy thing) It had a real splitter on it and we had a lot of trouble getting it off to get to the oil cooler and we can thankfully say that it was fastened with about 100 less screws than that faux carbon "splitter"

[@KevinHopkinson]

I laughed so hard at 5:44 because it's soooooo damn true!!!!

[@BBCharger5spd]

The only way to not lose the 10mm is to work on classic American cars I believe... otherwise that thing is gone.

[@thahefguy]

BBCharger5spd 84 Chevy Caprice and I for some reason have metric bolts🤣🤣🤣

[@Elektronick.online]

9:34 thats how peanut butter gets produced

[@nbsmoke7429]

that's fking mustard xDDD

[@iheartradio5]

Who else has been binge watching weird videos like this for hours due to quarantine

[@Arana890]

2:18 that welding job, that's what I call "custom build:

[@islemmmn4502]

Do u want to race ?? I'm dead 😂😂😂

[@frederickglass1583]

I love the fact the Mustang drifting clip is of the Drift Session on Market St. at the St. Louis auto show every January. I used to live in STL

[@dodgy_jammer281]

Bit dangerous to let your dog that close to a sideways mustang 😂

[@DeputatKaktus]

0:38 Nothing wrong here..gotta engage that safety squint.

[@pilc6955]

0:58 Honda owners, when VTEC kicks in.

[@lkotro21]

8:00 Every single shopping trolley cart in the supermarket.

[@AngelRodriguez-rd8ny]

4:29 definitely OSHA approved

[@xeon5486]

Mechanics don’t care about osha till they do a inspection then they follow the rules

[@NBC_NCO]

Priceless!!! Customer wants me to put it back on....call a wrecker and you can do it.

[@BrayZap]

The 122 screws in the carbon fiber lip is impressive af that thing will never fall off

[@phill1074]

That’s why they needed the carbon fibre because they knew how many screws they were going to use on it so the weight savings balances itself out

[@AsuGo]

I love you for these videos

[@mauriceclark6093]

That damn 10mm!

[@GXKid06]

3:41 is because of the stupid plastic cover over the window. My 4runner did this when I bought it until i removed the stupid things.

[@Sky_TEC_Illustraition_Systems]

Gosh these bring back so many expensive memories.

[@funnypranker34]

First video of this, been there done that couple times

[@fishnfreak04]

Peter Kapica eh jus gotta torque them til they start to get loose again👌🏼👌🏼

[@marctompkins3001]

I clicked in this because I once owned a 64 Impala, that had motor oil that was tan when I bought it, but at time stamp 0.39 I’m shocked at Mr. Domass welding with no darkened face shield, welding helmet or darkened goggles.

[@kodymartinmaas4816]

Death wobble... tip for you jeep folks, tighten your track bars (that's what made mine do that).

[@mikebeckham9607]

Ancient tuner mythology states that if you weld a crankshaft on the connecting rod lobes you'll achieve +100 torque. Doing it without a welders mask doubles the effect.

[@MrCaptaintrips54]

The 10mm bit... Hilarious, yet true.

[@treeguyable]

Back in the 70's, everyone had some speaker wire holding up a muffler, c'mon.

[@Pete-z6e]

Blinker fluid, see, told you!!

[@Akumarb26]

1:40 I think that guy may have been Scottish 🤣🤣🤣 Doesn’t wanna pay for a part more than once!

[@siscovazquez5612]

at 5:42. the 10 mm had me rollin!

[@ramonalvarez8559]

2:49 this got me cracking up.

[@davidtinney6355]

That 1st clip, what did you think was gonna happen? Standing on the tire iron..ping, ohp there goes your lug you dope...

[@JoveRogers97]

That opening just happened to my Civic a year ago!! I'd got a flat repaired at, idk, Walmart or some shit, and they'd cross threaded ALL FIVE of my nuts 😭 Not something you discover til you break your studs taking the wheel off

[@maisi3535]

5:43 i know this moment to good XD

[@charlesshreeve319]

3:47 So satisfying? What, the silky smooth texture, or the lovely pea soup puke green color?