Need to Recalibrate Your Stihl M-Tronic System? Here's How To Do It!

#CarlsMowerAndSaw #stihl #stihlmtronic #stihlchainsaw
The Stihl M-Tronic system does an excellent job of keeping your piece of Stihl equipment at the optimal level of performance by controlling the ignition timing and fuel dosage whether you're starting up your chainsaw, hard at work, or even restarting it.
If you need to recalibrate the system on any pieces of your equipment that has the M-Tronic 2.1 system (or anything higher), you'll want to give this a watch!
Not sure what version you have? Just check the silver sticker (usually found near the handle).
------------------
◼️ SUBSCRIBE to Carl's Mower & Saw 👉 tinyurl.com/rz...
After many years in the industry, Carl Levien decided it was time to go out on his own. The day came, April 1, 1990, when Carl and Beth Levien officially opened Carl’s Mower & Saw. With a clear goal to provide a higher level of service to Whatcom County, they opened their doors and started building a loyal following of customers. They discovered customers were refreshed by the quality of service available to them. Over the past 30 years we have continued to refine our services and provide the top equipment in the industry.
📞 360-384-0799 / 📧 [e-mail]
Have questions? Drop a comment!
------------------
For more handy tips, follow our socials...
◼️ INSTAGRAM: tinyurl.com/mh...
◼️ FACEBOOK: tinyurl.com/un...
------------------
◼️ WANT MORE TIPS? SEE OUR BLOG: tinyurl.com/9a...

[@st7650]

Wow love Stihl pro saws built to last nice knowing how to reset it thank you so much love your videos

[@ronwc64]

Good to meet you Carl. I am waiting on an ms261 as a first time owner of a stihl and I appreciate any info on tips and maintenance I can get

[@johnsweeney1712]

Great video, good to see and hear the calibration process. Thank you.

[@Redhackle]

Very good . Nice and clear. Thank you.

[@barrybrum]

Hey Josh, your videos are very helpful, thanks for creating and posting them here. I have a question... how often should I mix new gasoline and oil for my M-Tronic Stihl? I mix about a gallon at a time, but often don't use all of it in one cutting. I store the premixed fuel in a sealed container in the garage where the temperature remains fairly constant year round. Is it okay to use premixed fuel that is a few months old? It will run the saw, but is it doing any harm to the engine? Thanks for your help.

[@jasongutierrez8642]

My stihl ms 441c has the m tronics carb. It won’t start after replacing the ignition coil and spark plug. Not sure what to do honestly

[@videocardzrule354]

I’m buying a Stihl 261 (20”) from my local shop. They have both in-stock and brand new. Should I get M-Tronic? Or non M-Tronic? My first saw ever, I bought a piece of land a saw. Unsure which one. 😢

[@fxnytroxtxFPP]

My is 2019 ms261c and it does not specify the version of mtronics, which procedure should i do?

[@carlsmowerandsaw]

There is an indication on the sticker on the rear handle.

[@russbedenbaugh4558]

Do you do this process every time you use the saw when it is cold?

[@youtubeuserUCVuhjgRB1]

wife loves when i do this in the garage

[@mikebadilla6970]

Thank you

[@harryerhart5978]

Nice video l never knew that 👍👍

[@rottiejakeluke]

Once you recalibrate, when do you need to do it again? Say I calibrated it and then cut some wood, but put the saw❤ up for a month before needing to use it again. What do I need to do when pitching it to use after the moth has passed?

[@davepayton3442]

This should only be required on rare occasions. If you replace diaphragms, clean your carb, such as that, you will possibly want to reset. Most of the time reset is not needed on your saw.

[@rottiejakeluke]

@@davepayton3442 thank you. I was thinking this would have been the case, but needed feedback since I am no expert, juts wanting to do the right thing.

[@tuberocker69]

Changes in elevation and temperature would also apply

[@rickdavid1795]

Good stuff Thank you

[@carlsmowerandsaw]

Glad to help.

[@mariomannelli9887]

Sound effects are on point 😂

[@gclaper1234]

I have a 2017 stihl ms 362cm. Do you know which version of m tronic it would have??

[@cMurder2osix]

No, probably v.2.1. Just try all three methods.

[@kwspreu]

Would a new saw need to be recalibrated 8:21 from the factory or is it good to go?

[@carlsmowerandsaw]

No you should not need to recalibrate a new saw

[@cMurder2osix]

Good, it's brand new l. 😂

[@cliffcorbitt9494]

I tried all this but as soon as you let it idle for 45 seconds then give it Full Throttle it only runs for one and a half second later

[@carlsmowerandsaw]

Sounds like you may have a little deeper problem.

[@benjaminleslie3155]

Is stihl going to make the ms400 with a full wrap? I understand you can order the part that fit's the saw but I just wonder why they don't make a full wrap version right off the shelf

[@carlsmowerandsaw]

At some point yes. Just not a high priority at this time. Not sure why

[@Mr_Clean]

362 wrap handle fits. Pricey though

[@kalebbrown93]

Wait did you run it at idle and WOT with the chain spinning?

[@warrior4-u]

Yes, take brake off before WOT.

[@paulmccallum4229]

he took the brake off about 20 sec into the idle portion

[@carlsmowerandsaw]

No the brake was only on during start and idle. Sorry if you missed that.

[@cMurder2osix]

Of course, unless you want to melt your case. 😂

[@CowboyAxe]

If you need to tune a new saw can you use that method?. It goes against what they advice.

[@carlsmowerandsaw]

You should not need to tune a new saw

[@CowboyAxe]

@@carlsmowerandsaw Thank you/

[@adrianm8852]

Are you supposed to do this when the saw is brand new?

[@cMurder2osix]

No, why would you? It's reset because it has never been started.

[@bradgold7138]

Chaps shaps ?

[@austingriffith1118]

I would never do this to my clutch. Just take the brake off.

[@paulmccallum4229]

he took the brake off at 20 sec into idle portion

[@cMurder2osix]

If your a women leave it on.

[@bashdenny1768]

Nmb2

[@mariomannelli9887]

Ms201tc

[@user-jw3wh9sb5e]

Stihl ruined good saws with this mtronic garbage.

[@cMurder2osix]

Got a hater here. I have two, best technology out there. 😂