Hey Scotty, Once you put the paint stripper on, cover it with a sheet of plastic. It will stop it becoming dry and make it work 10 times better.
@ibast14 жыл бұрын
I have a door to strip soon, I'll try this.
@tony66au4 жыл бұрын
I'd argue thats more an old school trick, the modern gel strippers just need the panel to be cool and out of direct sunlight. I did both and apart from the mess there wasnt any real difference where 20 years ago there was a big difference. Formula's change as they ban or remove the "Dangerous" chemicals and in some cases they've actually improved
@MJTAUTOMOTIVE4 жыл бұрын
@@tony66au. You can see that the brush on stripper dries out on roof. It is old school trick, but still used every day.
@marvinmartinsYT4 жыл бұрын
Mark Thomas Nice tip bro. Cheers.
@alt74884 жыл бұрын
@@ibast1 if you have a compressor just buy those small top-loading sandblasters from bunnings or super cheap...it's a lot quicker and easier than this
@matthewpotter29514 жыл бұрын
Best strip show I've seen this side of ISO
@clintforwomen4 жыл бұрын
This is the best tutorial to restore a car ever made in the world. And they choose a Mopar A-Body. How lucky we are!!! Thanks
@Devastator04 жыл бұрын
Coming along really nicely Scotty!!! All of the prep work will come through when paint is on it so keep at it! Always love me some Wagon action haha. Keep up the good work mate!!
@liamwhelan99174 жыл бұрын
A message from the people of IRELAND, that is one sexy waggon👌keep up the good work scotty really looking forward to seeing her all done up
@trevorhunter3744 жыл бұрын
Good job mate. Good to see all the bog was used on the quarter panel haha
@7071t64 жыл бұрын
Well done scotty, there is some HD version of the paint stripper products, just paint on with a brush and bang after about 20 minutes you can just hose it all off, or just use a wet towel and it should come straight off, but also when using this stuff you have to have a mask on, due to the old paint which would be lead based? Keep up the great work Scotty. cheers. 🏎👍🙌✌👌😊
@chrisspinella7404 жыл бұрын
I'd love to do this for a living as I dropped out of school as the teachers there are useless. Love you streetmachine can't wait to get my dads torrie back on the street.
@metalfacedoom48204 жыл бұрын
Nice work Scotty, I love this project and all the work you are doing.
@jacknotley38914 жыл бұрын
The plastic over the top is an excellent idea also puting some deep scratches the paint with some coarse sand paper before applying the stripper will really help it get under the paint, Goodluck with the rest of the project,
@davidbarnsley84864 жыл бұрын
Two applications of the stripper will do it I can’t believe the trouble someone went to , to change the colour from that nice original colour to that yucky orange I hope you paint it original that is such a nice colour 😍👍👍 Brush on. Only works better because you put so much more stuff on
@ivenevermademyownvideos49814 жыл бұрын
Love the BBQ tool paint scraper 😂
@shanehurenkamp504 жыл бұрын
Scotty, Lay a thick coat of the brush on stuff and put a layer of glad wrap over the top of the area to keep the fumes from escaping. It works way better
@maccant47074 жыл бұрын
Loving watching you strip panels, can’t wait to watch the paint dry.
@rubenpopczyk46844 жыл бұрын
Excited about this wagon and I’m not really a wagon guy
@badstimpy4 жыл бұрын
Was waiting for Ron Jeremy to make an appearance !!
@timothysebo-glenn8644 жыл бұрын
It’s going to look so good once you’re done! Are you painting original colour afterwards or choosing something else? A candy red would look amazing
@lukeya19834 жыл бұрын
What a great idea Paint stripper in a can 👍 Loving the music 😂enhances the video
@steveveness38294 жыл бұрын
G'day from West Australia, Scotty😉 Stripping paint, No matter how one does it, is far worse than the anything else !!! It just has to be done, just wish soda blasting was around almost 40yrs ago when I started stripping paint for rust or dent repairs😉🙂👍👍
@1skidpig4 жыл бұрын
Love the music scotty keep up the ripper work
@Techheadzc324 жыл бұрын
Channeling Project Binky with the funk music mate! 😂😂
@jimclarke11084 жыл бұрын
Great cars Valiants, hope you paint it a different colour ))
@g_wizard98664 жыл бұрын
Scotty, time to go above and beyond...grow the mo to match the music! 😁😁😁
@matthewhill69464 жыл бұрын
LOVE the music
@deankdx4 жыл бұрын
how is the Ryobi grinder holding up? starting to sound noisier but it's eaten a lot of rust/dust/paint no doubt. are you allowed to give feedback on the tools you're using?
@STREETMACHINETV4 жыл бұрын
They're working great, no problems at all. We have some brushless and some brush-style so that might be the difference.
@matt_hayward4 жыл бұрын
funky funky rust removal. Surprised rustoleum don't make a wah wah
@dragithedon4 жыл бұрын
Love the background music
@lukeclarke80544 жыл бұрын
What’s the best product to get high temp paint off ? Love the videos as always. Keen to see the wagon finished.
@bunning634 жыл бұрын
Another use for the bbq brush!
@skidpins6694 жыл бұрын
scuffing the paint with some 40 grit before applying the stripper helps alot
@craigritchie15324 жыл бұрын
Hey scotty , instead of using a paint scraper to remove the paint when paint stripping a car use some coarse stainless steel pot srubbers , they work much better than the scapper your using and they don't mark the body panels , they also negate the need to use a spaghetti wheel on the grinder. If your a cheap skate like me just leave the used scrubbers to dry then simply rub them between your hands to remove old paint stripper and paint, it falls streight out and there good to go again . You won't regret trying this as its a much easier way to do a pretty stinky job
@Hamsteren914 жыл бұрын
The hard working man💪
@Andrew.quigley4 жыл бұрын
Aunt Edna was on the roof.
@TeamTCKRacing4 жыл бұрын
When someone says “my quotes for a restoration jobs are too much”, I’ll show them the last 15 seconds where you look tired and shagged and they should understand what goes into it 😂
@STREETMACHINETV4 жыл бұрын
Happy to help haha
@tony66au4 жыл бұрын
Gotta love the Longroof, Not..... :-) And this Scotty is why I dont fuss about paint, Rust sure, Mechanical Yup but with all the different layers and types of paint you have to undo to get back to bare metal its the angry twisted knot wire cup brush on the $35 grinder or nothing. I did use the Brush on stripper on an alloy skin boot (Trunk) lid on an SLC im playing with and gladwrapped the thing to let it soak n react and it took 2 applications and then light sanding to finish the job but again it was a tough job with car yard 2k over touch up spray layers over the original 1972 factory paint and red lead with all the spray boggy goodness in-between.
@DodgyBrothersEngineering4 жыл бұрын
Scotty can you recommend the dusk mask you use? Looking for something for myself.
@STREETMACHINETV4 жыл бұрын
I think it as a 3M umit we got from Bunnings
@Fortnite874634 жыл бұрын
Good video, make more please
@pauljohns82154 жыл бұрын
Hello down there in Victoria hope you are keeping safe
@Russeljfinch4 жыл бұрын
Chris @ Yarra Valley Blasting is the guy to use. Low pressure ,High volume media blasting ie NO WARPING ever !!
@itzlahelle87874 жыл бұрын
Is the brush-on compatible with a roller? I’m just thinking it would be faster to apply it that way, no matter thick or thin coat🤔🤷🏻♂️
@rustywrench5004 жыл бұрын
Love these vids.
@JTECH77664 жыл бұрын
Scuff up the paint with some 24 or 36 grit before application and it will bite much better. 1st year of my apprenticeship was on stripper duty, I had it down to a fine art!
@STREETMACHINETV4 жыл бұрын
Thanks for the advice
@jordywilson30954 жыл бұрын
Broooooo please keep the tridens on it hahaha dad had many vals i reckon they suit tridens so much
@iporcupinetree4 жыл бұрын
How good is it going to be... bare metal restore
@stoneshrink4 жыл бұрын
The National Lampoon Vacation reference gets you all the stars. About the stripper, I'd worry the aerosol would get vapor into your lungs. And about stripper, it is an option, but be absolutely certain to get to bare metal if you use it - like you did - otherwise the stripper can hide in the remaining paint and cause much damage to your new paint later. Also, strippers - when you sand it off, your making the stripper into an aerosol... and of that dust on your other cars will reconstitute briefly with water and damage paint... sorry, not much a fan of strippers, they come with many seen and unseen issues.
@steveanderson58884 жыл бұрын
hey after you take off the Paint With a Stripper what's the red stuff on the car that primer or body fill? I love your videos man stay safe in Australia and hey do you have a AC going? I thought it was hot in Australia
@STREETMACHINETV4 жыл бұрын
cold at the moment where we are
@steveanderson58884 жыл бұрын
@@STREETMACHINETV stay warm my friend I'm in the United States Bonney Lake Washington State it is 90 degrees here no humidity thank you like I said my friend stay warm
@mrtailwind8644 жыл бұрын
Have u got a plan for the Val mate? Colour,motor,trim,wheels etc,or is it a work in progress related to budget and see how u go type deal🤓
@STREETMACHINETV4 жыл бұрын
Very much budget orientated but also work in progress
@marvinmartinsYT4 жыл бұрын
The brush on should always be best. The spray on is a bit diluted from the propellant.
@alt74884 жыл бұрын
you should bite the bullet and buy a small hand held sand blaster and garnet for those jams
@aussieas.92964 жыл бұрын
Brush the stripper on thick then lay a plastic drop sheet over it and let it cook for a bit. It’ll work better 👍
@gazzgarage54124 жыл бұрын
How long can u leave it bare metal b4 it needs prime
@marktamblyn85214 жыл бұрын
This freaked my son out lol @ 7:40
@jamiegreenwood79964 жыл бұрын
rough orange paint job problery out of the seventys ....some one on lsd back then dragging their misses over the roof caused scrape marks omg....
@guypoole34444 жыл бұрын
At least you can keep occupied through the Dandemic...love the soundtrack who said Melbourne was 20 years behind????/
@mickteasdale32254 жыл бұрын
Scotty what have you decided to do with the back 1/4?
@STREETMACHINETV4 жыл бұрын
We'll have an answer for you next week.
@ibast14 жыл бұрын
Good to see the heavy rubber gloves. I've found normal disposable gloves have limited effect. Nitrile being the worst for this stuff. You can feel your hands stinging within about a minute with nitrile.
@AussieGinger4 жыл бұрын
Great stuff mate! What do you think of the Ryobi cordless grinder (unsure if sponsored or not). Thinking of adding it to my arsenal. I hope you and the fam are keeping well mate, keep it up!
@STREETMACHINETV4 жыл бұрын
They're a good thing
@AussieGinger4 жыл бұрын
Much like yourself then mate. Keep up the awesome content and maybe see you around the shops soon.
@andrewmurray67724 жыл бұрын
how was fumes from the 2 products Scotty ?? Ive used paint strippers in the past and the fumes were pretty bad
@STREETMACHINETV4 жыл бұрын
The fumes from the brush on stuff were more intense
@bigmatlock624 жыл бұрын
I think I need ya over here in NZ to try a few different chemicals on my xf Panelvan or send me some of those flapper discs . The discs here create sparks or I’m using the wrong ones...
@deancooper63004 жыл бұрын
The flapper discs are for grinding welds... the ones you want are called strip it discs... should be able to get them from Bunnings in enzed👍www.bunnings.com.au/flexovit-100mm-multi-purpose-flexi-strip-stripping-disc_p6310279
@bigmatlock624 жыл бұрын
dean cooper thanks, top man!
@paulwhelan414 жыл бұрын
Pitty you weren’t in SA - I would of helped you. Check out Premier Panel Services :)
@yellowscott4 жыл бұрын
Get the funk out!
@samuelthorne85554 жыл бұрын
7:40 scares me
@fredderf5514 жыл бұрын
" hope we have no bog" Isn't Summernats sponsored by Rage Ultra.
@RobertSalamun4 жыл бұрын
“Aircraft Paint Remover” Works Best.
@STREETCARCULTURE4 жыл бұрын
👌🏽
@someyoungguy69904 жыл бұрын
Cars are like kids, they cost a fortune to maintain, take up all your time. Get you in the shit with the wife, all while protecting them from scoundrels. But seeing them out in the world, makes every bit of it worth while.
@Pittsy3084 жыл бұрын
The 70’s porn music rocks 🤘
@jenibond4 жыл бұрын
Crikey ! How small is the Carnage Budget ? Not only is Scotty on grinder, he having to strip to make few extra dollars !!!!
@STREETMACHINETV4 жыл бұрын
Pretty small
@mazcatii4 жыл бұрын
I don't always watch strippers on KZbin, but when I do I'm watching Scotty 😉👌
@reddysteddy21954 жыл бұрын
Extra 50 points for whoever can guess which 70's porno that tune is from!
@bunning634 жыл бұрын
You read my mind...
@reddysteddy21954 жыл бұрын
@@bunning63 I haven't seen that one
@alt74884 жыл бұрын
debbie does dallas 2
@bunning634 жыл бұрын
@@reddysteddy2195 Nice one.
@bunning634 жыл бұрын
@@alt7488 I was going to say the same, but didn't want people getting ideas!
@Philthebrush4 жыл бұрын
3m make wheels that go on buffing ,grinder machines ,they are like a rough scourer pad ,way better than that flappy disc,
@STREETMACHINETV4 жыл бұрын
Hard to source locally though. I need to find some. I don't use flappy disc to remove paint, they're too harsh
@gogetem1884 жыл бұрын
YUP SCOTTIE THE MOTHER IN LAW HAAAAAA so wat scraped her wheelchair ?????? lol I SEE SAFETY ISN'T FIRST !!!!!!
@bc14664 жыл бұрын
Gotta love the 70’s porno music
@honestpat77894 жыл бұрын
This wagon would make a really cool woody - sweet fix for those rear guards that look like they’ve been raped by a whale. That or rat-rod would be a great match for the 70s porno music 😂
@nathanoppermann88964 жыл бұрын
This is painful to watch 😥 use a professional sandblaster . If I was down your way I would do it free for you to show everyone 😉.
@alt74884 жыл бұрын
i would have used those small top loading ones from bunnings/supercheap, those will work really well for the door jams
@nathanoppermann88964 жыл бұрын
Nar bud a real sand blaster contactor . A real system like dustless blasting , ABSS or clemco and so on can do a whole car in and out in 5 to 6 hours to bear white steel look up my business TSPMediaBlasting . Not cheap cheap but save you 3 to 4 weeks of hell .
@charliekelly1454 жыл бұрын
Where you from Nathan? My panel van needs a full blast inside And out it’s on a rotisserie at the moment
@nathanoppermann88964 жыл бұрын
I'm just outside of Brisbane in Qld , there are blasters down your way . Your in Vic yea?
@MrFathead4 жыл бұрын
@@nathanoppermann8896 How does it work does the sandblaster come to your house and smash it all out in a day? Would it make a insane mess? What is the cost for a whole car?
@xozindustries74514 жыл бұрын
I cover the stripper with plastic wrap so it won’t dry out, let’s it eat better
@JesusisJesus4 жыл бұрын
First-o-leum.
@turbotheamericanstaffy4 жыл бұрын
Why didn't you just get the whole car media blasted?
@WaxedMerkin4 жыл бұрын
whats with the 80's strip club music
@mcrotor774 жыл бұрын
I want the porn music as my ringtone. What's the song?
@hookemups67104 жыл бұрын
why did you not just hit it with a 60 grit pad? thats painful to watch.
@Beer_Dad19754 жыл бұрын
Wow, that did not look fun.
@joelturbobyrnes4 жыл бұрын
Ahhh paint stripping the best part of any project car NOT
@jyena19844 жыл бұрын
The music made me turn it off.
@nathanberriman99574 жыл бұрын
Bro you need to get rid of the 70’s porn music aye.