⚡ 5 Amazing Router Hacks with New Template DIY / MFS / Woodworking Tips and Tricks

[@mirojanki7129]

hey... So that's what I call a real routing template! All respect!. I've seen many ideas and projects for routing template, but none came close to making as much sense as this one. The commercial milling copy offers didn't really convince me either. The useful features that have been implemented here in the routing template speak of a craft "carpenter" experience, who really thought a lot about what you really need in woodwork through his design. So that the work can be done as quickly as possible. So the device addresses all possible situations, in the carpenter area and all the more in the hobby area, Thanks for the idea... It will be implemented as soon as possible. Not in wood but in 15mm aluminum groove profile. thumbs up? Best regards

[@carpentak]

Thank you very much for your nice comments. It would be better if you use an aluminum profile. ok thumbs up!

[@СергейЖук-ш1ш]

Это давно уже реализовано !!! Parettool называется

[@PennsPens]

Wait till you try a deeper cut and the bearing drops inside the jigs adjustable slide grove, and the cutter destroys both the jig and your project. People be cursing him after that!! Credit where due for the "lazer ruler" though... this ruler would be great incorporated into other more improved version jigs, that's available on KZbin.

[@Starman3539]

This is a worthwhile project, which has been efficiently presented. I think that viewers of your videos would appreciate links to the tools that you use, but even more importantly links of where one could find/purchase the accessories that you use in your projects.

[@1960antoniomachado]

I World Knowles how can i do to get this this jig interesting ad useful.

[@titol34]

that's what I call a MASTER PIECE all respect bro thans so much :-) congratulations from France

[@barry.w.christie]

I think this is one of the neatest versions of this particular jig I've seen, adding the laser etched measurements is a level up and the use of quick release bicycle clamps for setting to size is genius ... another plus is these clamps are dirt cheap, I can see myself using them for other purposes 👍

[@PennsPens]

Wait till you try a deeper cut and the bearing drops inside the jigs adjustable slide grove, and the cutter destroys both the jig and your project. People be cursing this jig after that. Credit where due for the "lazer ruler" though... this ruler would be great incorporated into other more improved version jigs, that's available on KZbin.

[@dleivam]

Awesome.. I've seen this jig in several videos in youtube, but this one is by far the best. Kudos!

[@PennsPens]

Wait till you try a deeper cut and the bearing drops inside the jigs adjustable slide grove, and the cutter destroys both the jig and your project. People be cursing this jig after that. Credit where due for the "lazer ruler" though... this ruler would be great incorporated into other more improved version jigs, that's available on KZbin.

[@TheDublin47]

Omg the tools you have are out of this world I would love to work in your workshop. All the best from Ireland ❤

[@PennsPens]

AhhRRrrrrrr therre meee heartiee at Irrrland.... Poppie the woodworking man toot toot

[@ЮрийС-я2г]

Очень функциональное изделие! Хороший Мастер, приятно смотреть.

[@МилыйДом-о8ч]

ребята, это круто, руки точно растут с нужного места👍👍👍

[@steveferguson1232]

That’s a great router jig. Using the laser to create the ruler for dimensions is a great addition

[@PennsPens]

Wait till you try a deeper cut and the bearing drops inside the jigs adjustable slide grove, and the cutter destroys both the jig and your project. People be cursing this jig after that. Credit where due for the "lazer ruler" though... this ruler would be great incorporated into other more improved version jigs, that's available on KZbin.

[@felix4525]

Must be really nice to always have the right tool for the job.

[@jere7429]

Awesome next level jig. With all the additions to a simple router, just amazing. Makes it so versatile.

[@PennsPens]

Wait till you try a deeper cut and the bearing drops inside the jigs adjustable slide grove, and the cutter destroys both the jig and your project. People be cursing this jig after that. Credit where due for the "lazer ruler" though... this ruler would be great incorporated into other more improved version jigs, that's available on KZbin.

[@totoffe6234]

Vraiment un travail fabuleux ont à envie de l'avoir dans son atelier 👍👍👍👏👏👏

[@lakshminarasimhaniyengar1032]

Extraordinary Sir! Thanks for sharing!

[@renatomondadori4062]

¡Gracias!

[@carpentak]

gracias!!

[@carpentak]

Gracias!!

[@leegordon5433]

This is head and shoulders above any other jig of this type I have seen on KZbin. Thanks for sharing this, a stunning piece of design and engineering.

[@PennsPens]

Wait till you try a deeper cut and the bearing drops inside the jigs adjustable slide grove, and the cutter destroys both the jig and your project. You'll be cursing this jig after that happens - unless your head and shoulders bs standards are well below ground level. Credit where due for the "lazer ruler" though... this ruler would be great incorporated into other more improved version jigs, that's available on KZbin.

[@NSResponder]

Really like the centering jig. Sure beats trial-and-error with the fence on a router table.

[@PatBuckleyracecar]

Isn't it amazing how easy stuff is to do when you have talent?

[@PennsPens]

Wait till you try a deeper cut and the bearing drops inside the jigs adjustable slide grove, and the cutter destroys both the jig and your project. People be cursing this jig after that. Credit where due for the "lazer ruler" though... this ruler would be great incorporated into other more improved version jigs, that's available on KZbin.

[@TheWebmastercol]

Am a fan of your work Tak, love everything you do and this project is no exception. Completely understand your not wanting to supply plans too, however I had a devil of a job trying to find/know what the clamps were called. It wasn’t until I read the comments that I discovered they were called Bicycle Saddle Quick Release Clamps. My only suggestion to improve the excellent presentations you already make would be to identify what bits and pieces you used to make a project and perhaps where you bought them. Keep up the fine work and keep those projects coming!

[@derekbolton4]

What a fantastic jig you made 👍

[@leroymellix5647]

Now that is impressive! Thanks for sharing!

[@alvarez958]

YOU ARE VERY GOOOOOOOOOD !!!!!!!!!!!!!!!!!!!!!!!!!!!!!👏👏👏👏👏

[@PennsPens]

Wait till you try a deeper cut and the bearing drops inside the jigs adjustable slide grove, and the cutter destroys both the jig and your project. People be cursing this jig after that. Credit where due for the "lazer ruler" though... this ruler would be great incorporated into other more improved version jigs, that's available on KZbin.

[@DaveEbert]

im just at wow super great jig design

[@PennsPens]

Wait till you try a deeper cut and the bearing drops inside the jigs adjustable slide grove, and the cutter destroys both the jig and your project. If your impressed you'll soon be cursing this jig after that happens - clearly you ain't no woodworker! Credit where due for the "lazer ruler" though... this ruler would be great incorporated into other more improved version jigs, that's available on KZbin.

[@gyulabujtor7378]

Perfect! Your ideas are very good

[@dragongames5113]

Best one I’ve seen

[@PennsPens]

Wait till you try a deeper cut and the bearing drops inside the jigs adjustable slide grove, and the cutter destroys both the jig and your project. People be cursing this jig after that. Credit where due for the "lazer ruler" though... this ruler would be great incorporated into other more improved version jigs, that's available on KZbin.

[@yongde6791]

안녕하세요 선생님 너무 재미있는 영상 감사합니다.

[@sjoerdverwijs6366]

What a beauty! Love the material choice, the mm scale and definitely the clamps/stops! Great ideas

[@bijan4727]

Hello this is N awesome , excellent work. I really love it. I want to make this thing, I wish you would have left a link to those clamps. I would I appreciate if you would instruct me to get those clamps. Thank you very much.

[@carpentak]

It's a quick release clamp for bicycles. If you search like that, you'll find it. thank you

[@patrickgirard-k3g]

great achievement!

[@kennethsharrock2239]

The best router template I have seen, very precise work, thanks for sharing your ideas via video 😀

[@PennsPens]

Wait till you try a deeper cut and the bearing drops inside the jigs adjustable slide grove, and the cutter destroys both the jig and your project. People be cursing this jig after that. Credit where due for the "lazer ruler" though... this ruler would be great incorporated into other more improved version jigs, that's available on KZbin.

[@michaelbaykara2322]

You should have plans for this Takkie, this is very good.

[@luismanuelhernandez1265]

HOLA, EXCELENTE , MUY PROFESIONAL MUY EXACTO. PODRIAS INDICARME QUE ROUTER USAS Y COMO EVITAS QUE SALGA EL ASERRIN Y EL POLVO? EL GUARDAPOLVO ES HECHO POR TI O LO COMPRASTE? DONDE PUEDO VER MAS VIDEOS TUYOS? GRACIAS ANTICIPADAS

[@carpentak]

Hello. I used Makita brand small router and the dust intake is included in the router package. See more videos on my channel. youtube.com/@carpentak

[@gforcekaras]

Genius and creative!

[@luisfigueiredo1653]

Parabens o melhor de todos

[@TheWeekendWoodshop]

That is a GREAT jig TAK! I may have to make one of my own. Thanks for sharing 😁

[@onehandcowboy]

As always, work of art ;-)

[@hammer_crying]

구독 박고 주변인들 추천하겠습니다 취목치곤 퀄리티가 상당하십니다

[@petermelnikov682]

Nice! I made similar festool-style template using 1570 extrusions to keep it as low-profile as possible (to have an increased cut depth), and exactly the same clamps :)

[@adelivron]

I think I would buy one if it was commercially available. I could imagine a base unit and then an optional accessory pack.

[@fabricem2744]

Hi, Did you make yourself your plexiglass support for the router with its two handles or did you buy it. I think that you should have to do it by yourself. In this case, do you have a video for this equipment? Thanks.

[@fabricem2744]

I found your video... oops ! Thanks

[@xronisdimopulos4147]

Καταπληκτική δουλειά, συγχαρητήρια.

[@Starman3539]

Love to see the Greek language used here!

[@giorgioud1]

lunghezza e larghezza che misure hanno, complimenti eccezionele bravissimo

[@mickeypoppi]

great design BUT where do you get the cam clamps??

[@carpentak]

If you search for QR clamps for bicycles on Amazon, etc., you will find them quickly.

[@pascalantoine4194]

Superbe réalisation, très bien réfléchie; Bravo👍

[@richjones2767]

Beautiful bit of work

[@68HC060]

This is a real beauty!! -You're absolutely a genius, it's been a long time since I've seen such a versatile tool! While I was watching, I was thinking that you may want to make one for 6 sides (so you can have 3 sides of different length). This should allow you to not only make hexagons, but also triangles and any 6-sided shape with parallel sides of different length. -I really loved the use of the laser engraver. When I saw the thumbnail, I thought this tool was something you bought (so I'd say if you make sure they don't have sharp corners, you could sell them to those who want one but are not able to make them). And the video-editing was also "just right" - the video shows everything without being boring! 😃

[@carpentak]

I saw some very nice honest comments. thank you so much.

[@bc-ti4bq]

I think just adjusting the jig would be a nightmare. You can easily make the hexagon shape with his current design. Just use his angle attachment and you'll get as accurate a cut as you would using dedicated jig maybe even more accurate. AND with his angle attachment you can make just about any shape you want. Want a hexagon? Just set the angle block to 60 degrees and follow the previous edge around. Want a pentagon set the blocks to 72 degrees. What I'd really like to have is access to his plans. Why redesign what already works so well.

[@pulpo439]

*¡¡¡ EXCELENTE TRABAJO !!!* 👌 👍 MUY BUEN VIDEO. 👏✊👏👏👏✌️

[@МихаилСтаростин-ы9ф]

Хороший шаблон. Я для себя не стал так сильно заморачиваться, сделал из алюминиевых профилей от торгового оборудования.

[@claudej55]

Encore une petite merveille......

[@FKproduksi888]

Good work bro 👍👍

[@tomasdrbal5479]

Hmm, perfect job and inspirating details!! Thanks!!!

[@bradleytuckwell4881]

Another great build thanks for sharing I always enjoy watching your work

[@carpentak]

Thank you. my friend

[@fabricem2744]

Very good as usual...and thanks for sharing! One question, how do you call and find the "handle clamps" that we can see at 4'35" of this video? Thanks in advance.

[@carpentak]

It is a quick release clamp for bicycles. It is usually called a QR clamp.

[@fabricem2744]

@@carpentak Good idea and thanks for the information. ;-)

[@fabricem2744]

what was the size of these squared bolts? M3? M4?

[@carpentak]

M6 is used for the clamp.

[@fabricem2744]

@@carpentak Thank you. All your videos are full of interesting tricks and I really like your precision and quality in all your achievements. It is a pity that we are living so far away both of us... 🙂

[@CaptainofmyShed]

Nice template.

[@geerthein5002]

Nice product. where did you buy the terminals of the four conductors. This one with the lever.

[@carpentak]

It is a QR clamp for bicycles. Find it at a bike parts store.

[@barry.w.christie]

​@@carpentak And as I searched for a suitable clamp ... that is exactly what I came across👍

[@ozsaul]

looks like you have an improved dust collector for your Dewalt Miter Saw. Any chance of a video on it's making?

[@carpentak]

그것은 오래전에 작업했고 영상은 만들지 않았습니다. 나의 인스타그램에 사진들은 있습니다. It was made a long time ago and no video was made. There are pictures on my Instagram.

[@haggenhan9558]

Please comment! I need to know where to buy that kind of clamping lever handle, or the correct name of it. I can't find it ... please

[@carpentak]

a.co/d/go5N9vy

[@charly_a8654]

Years ago i have built nearly the same router-template and its still in use. Bicycle-clamps as fasteners are really a good idea, its alway a bit tricky to adjust the nuts with a wrench. The t-slots at the bottom are also a good idea. And the laser-marking looks very professional. But i see that you make the same mistake: I also used a flush-cutter with top-ball-bearing. So you have a very small range for adjusting the milling-depth. And not only one time i was milling in the lower edge of the template, because the bearing was running in the slot instead at the top edge. So i used a copy-ring on the router and i can adjust the depth of the bit independently. You only have to observe the diameter-difference between copy-ring and router-bit.

[@carpentak]

Of course, there are times when I also use copy-rings. However, in this video, instead of calculating the interval using copying, the point is to directly set the template once and perform the milling operation, so only those are shown. you're right. This method is suggested because you need to position the bearing as well as the depth of milling. However, digging deeply at once is not because it is too much for the router or bit. I can get deep if I clear the template and dig it out two or three times. This is possible because of the bearings. Because of the bearings, the bits do not cross the boundaries already worked. Digging deeper is possible.

[@mikhailmikhail5265]

Awesome!!! Thank you, Master! Bravo!

[@michelangelogerbino9219]

ottimo molto bello. li produci anche per venderli?

[@carpentak]

thank you. I don't make for sale.

[@EverythingHomemadeEasier]

Awesome stuff!

[@MrLasipa]

Thanks for sharing!

[@3weight]

This is great! I’ve got the Woodpecker aluminum version already, but it hadn’t occurred to me to use it for precise fit dados, so thanks. Now I’m going to be looking for places where I’d like to have the track clamp slots, maybe I’ll end up making some of these anyway. Especially since they are tooless, unlike the woodpecker. Darn, now I need a laser too. 😬

[@михаилШаповалов-е5ш]

У столяра, занимающийся своим любимым делом, будет нескончаемый набор инструментов и такой же нескончаемый набор приспособлений. Столярное дело очень широко развито и не ограничивается изготовлением окон, дверей и табуретов. Работа столяра сродни горению огня.

[@koccocarrasco5696]

Espectacular 💯👍🏻👍🏻👍🏻

[@martinfallaize2947]

Hiya, What are the clamps on the adjustable router jig called?

[@carpentak]

This is a quick release clamp for bicycles.

[@martinfallaize2947]

@@carpentak tks

[@volvopez]

Perfect, innovativ, wonderful, nice 😀👍😀👍😀

[@artist4074]

Necessity is the mother of invention! 👍

[@jutsifunakosi]

Simplemente es impresionante, con que sencillez hace lo difícil 👌🏿👏🏿.

[@wolfwood1669]

Super nice

[@johnbauer3801]

do you sell plans for this router template???

[@carpentak]

I don't have plans.

[@J-Chong]

Gracias..!🇵🇪

[@ricardromero7165]

Excelente trabajo, enhorabuena.

[@LesAT49]

Very nice! Do you make plans for the projects you build? Are they for sale? Thank you!

[@carpentak]

Thank you. I don't have plans. I can't make it

[@oscarestebancurzio6702]

Verdaderamente hermoso trabajo Gracias

[@BOROTECH1]

Super precízna práca výborný nápad👍👍👍👍

[@JulioSang]

Fantastic, which is the screw hardware name?🆗, Thanks at lot

[@carpentak]

It is a quick release clamp for bicycles.

[@waltlee9525]

It's alot easier that you got all the tools needed to finish the project. Show the plan dimensionsand measurements.

[@_william_581]

Clever as ever. Nice work! ☺️👍

[@Scooby-NSK]

гениально! фестул нервно курит в сторонке

[@VideoRacingItaly]

Well done 💯💯💯

[@perforator-u6g]

super!

[@stofferreiffers3373]

Nice, but how much do all those tools cost to make something like that!!!!!!

[@haksoonhwang8865]

겁나 멋져부러... 훌륭합니다.. 목재는 어떤 건가요?

[@carpentak]

네 감사합니다. 고무나무집성판 입니다.

[@rubinofabio1931]

Ciao ottimo video posso sapere dove posso trovare il file per incidere il metro di misura? grazie

[@carpentak]

Thank you. The work was drawn and engraved by myself with the Lightburn program.

[@rubinofabio1931]

@@carpentak ok grazie

[@pedrog.b.9254]

Excelente!!!

[@Life-nl5cn]

기술의 신기함과 보여짐. 그뒤에 따라붙고 이어지는 응용과 창조는 많지만 군더더기 없는 실용의 끝판왕. 이런걸 원했어요. 한방에 정리되는 기술의 모둠버전

[@donevershed8601]

How can I get plans to build it

[@PeterNetped]

[@RUS-ow8gm]

👍👍👍👍👍👍👍

[@benjaminschlauch6576]

Do you have plans for this?

[@carpentak]

I have no plans. Sorry

[@aishora-di4fm]

Согласен с @PennsPens, что должна быть фреза правильной длины, чтобы подшипник касался шаблона, но вот при опускании фрезера ниже, подшипник уже может попасть в паз и испортить кондуктор и деталь. А значит фреза должна быть как минимум с двумя подшипниками.

[@felix4525]

Newbie here. Most jigs similar to this I have seen on KZbin use a bar to keep the distance from the baseplate to prevent the bit to cut into the jig edge. I can't see how this one is keeping the jig safe from the bit. Would be such a shame to ruin it by accident.

[@carpentak]

The reason is bearings. I used a bit with bearings when using this. The bearing contacts the jig and moves along the jig. So there is no damage to the jig. Now if you watch the video again, you will understand. Thanks.

[@felix4525]

@@carpentak Thanks for the note. I finally saw the pattern flush bit at 5:32 which I missed the first time. It helps a lot to see the bit you were using with the final product.

[@charleskim128]

정말 멋지네요. 철물이름과 구매 url 궁금하네요?

[@carpentak]

감사합니다. 철물은 자전거용 QR클램프 검색하면 찾을 겁니다.

[@johnbauer3801]

Would you make one for me , what would it costs?

[@carpentak]

sorry. I don't sell.

[@PennsPens]

Wait till you try a deeper cut and the bearing drops inside the jigs adjustable slide grove, and the cutter destroys both the jig and your project. People be cursing you after that. Credit where due for the "lazer ruler" though... this ruler would be great incorporated into other more improved version jigs, that's available on KZbin.

[@mikewelch3903]

Wow!

[@77777779227]

Где купить прозрачную штуку под фрезером?

[@carpentak]

그것은 투명 아크릴 입니다. 여기 한국에서는 파는곳이 많습니다.

[@donchicho545]

Con todas esas máquinas cualquiera hace herramientas..

[@НиколайНорин-ь2и]

Как подключается элек двиг от зернодробилки колектор к регул оборот

[@TheMindanaoJournal]

This only makes sense if you have all those high tech equipmentry.