Simple adjustable router template

[@GRINwood]

All free plans here: drive.google.com/drive/folders/1636_O_7KVQ5hzWAhDXBornWnvxXfweba?usp=sharing GRINwood shop: www.etsy.com/shop/GRINwood Support GRINwood: PayPal: [e-mail] Special thanks to John Jones Erik Raitviir Darren Neuman for donates

[@marco-me1uh]

nazi ukraine or russian part?

[@TroIIingThemSoftly]

@marco T Ruzzians ARE the Nazi part.

[@marco-me1uh]

@@TroIIingThemSoftly sure and the pig fly

[@marco-me1uh]

@@TroIIingThemSoftly ukraine are pretty close to be cleared from maps 😂

[@TroIIingThemSoftly]

@marco T It's going to be hilarious watching you orcs cope for the next 25 years as China's vassal 😂🌻

[@villageidiot8718]

I like the way the corners magically become squared.

[@friendlypiranha774]

Village Idiot, he is using a square-cornered round bit. Available at all good hardware stores just next to the sky hooks😂😂😂

[@BigBrotherIsTooBig]

@Village Idiot I love that you live up to your screen name.

[@villageidiot8718]

@@BigBrotherIsTooBig duh

[@peterschoemaker9]

Its a kinda magic!!

[@friendlypiranha774]

@@peterschoemaker9- I think they just wanted to break free😂😂😂

[@thomlipiczky9021]

Your videos are really good. No nonsense, very clear, no annoying music! Just the sweet whine of woodworking tools! Thanks.

[@Codesta]

I’ve seen a lot of jigs but yours is probably the most elegant, simple in design and non-clunky.

[@andyjame3350]

MUY buena calidad, el texto imagenes. kzbin.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO Un manuel muy completo y trabajado. Resulta muy práctico. Para principiantes y profesionales. Lo recomiendo

[@dleivam]

I've seen other jigs like this one in youtube, but this is the best.. clean, elegant an slick design.. congratulations and thanks for sharing.

[@TheDublin47]

Absolutely brilliant i will be in my workshop tomorrow and will be making one. Many thanks for the video good luck from Ireland

[@MarkMcCluney]

Most ingenious, as always. And your workshop is as clean as a kitchen! Thank you.

[@GRINwood]

Thank you Mark

[@helios1225]

Das wird wohl die beste Vorrichtung sein, die ich gesehen habe. Diese werde ich bauen. Vielen Dank für die Arbeit. ❤

[@thetinman1001]

Thank you for your generosity. Love your ideas. Simple, yet elegant, and very functional. The perfect mix

[@TomYoureDoingItWrong]

Be safe, Brother. Thanks for keeping at it.

[@peterdavey8348]

Simple but brilliant idea

[@darrelltessman4133]

Thank you so much for including PDF files. Absolutely love your elegant functional jigs.

[@andrefombertaux9211]

Always a joy to watch

[@Barnagh1]

Lots of very good ideas here, you have thought this out fully, it shows.

[@patricegoubaux2781]

Efficace, très bien et surtout bien exécuté 😉👍👍👍

[@AndyFromBeaverton]

It could be a picture frame jig too. Very creative!

[@talegunner115]

Nice job I love the jig. Simple but very precise!

[@SJ21608]

clever jig and well made video. with a bushing and core box bit it would cut a juice groove in a cutting board neatly too. The threaded rod coupling as an adjustment nut is nifty as well.

[@alsaffarstudios]

This very well designed jig. You presented the making process and testing in a very detailed way. Thank you very much for sharing your wonderful work with us 🙏🏼

[@Edward.Hillier]

"Just a simple little jig" *Pulls out a flawless piece of seasoned oak*

[@patrickguyot1290]

I think thats the best one ive seen so far….thank you 😊

[@jbb5470]

Great jig! Very clever

[@markkoons7488]

No doubt about it, your work and videos are first rate. Thank you.

[@chancesellers5425]

Wow you really come up with some amazing jigs I get a lot of my jigs from your channel 👍👍👍👍

[@shadowbanned5164]

Very nice my main issue making this would be those holes you drilled at 2:30 I assume they are important and have to be straight Im going to have to make that little drill jig you have in there.

[@ЮрийАнатольевичНикиточкин]

Добра! Багодарю за достойный креатив! Беру в работу.

[@frankcornfield5915]

Many thanks for another great video. I learn so much from your ideas for excellent jigs.

[@felix4525]

Thanks for the post. Very nice jig.

[@barbarianatgate2000]

This is a very elegant solution to a common problem! Well done!

[@rogerlove7588]

One of the best I’ve seen-I’m going to make this one. I thought your hole jig for the ends of the boards was very clever. I was wondering how you were going to drill those.

[@peterschoemaker9]

I love that we have the same Bosch router 👊 1 tip for the clamping, get some quick release clamps.

[@neilbaltes3469]

Thank you for your ideas and generosity

[@aag6499]

I build one based on this video and it came out great... thank you GRINwood❤❤❤

[@RikyToboga]

Qué Barbaro! GRacias por compartirlo. Saludos desde Argentina!

[@MichaelKingsfordGray]

What a brilliant idea! Why didn't I think of it? Thanks. Going to the shed to make one now...

[@frankthetank8749]

Man I would love to work with this guy for like a month.. # 4 on my " "wish list". 🤞

[@wandicksantossena855]

Easy and fantastic! Awersome.

[@rickkinney1249]

best one yet thanx rick

[@TheOdigos]

Very cool! Finding a 14mm T-track is a problem here though. I haven't come across them on the internet either.

[@ammeor]

Superbe idée, bravo

[@trngswoodworkingideas3335]

Great Job and very useful. Have a nice day

[@woodennecktie]

neat job and good methodes ,fair set of tools

[@moovintruespace]

Stunning! Love it ‼️

[@niklar55]

Nice job, well executed.

[@rowlandprinsloo7287]

Great jig, just one question is there not a chance that the bearing will fit in between the t-slot groove if you must plunge deeper causing the router bit to come into contact with the t-track. Stay safe!

[@camhutchison5553]

The router bit used (kzbin.info/www/bejne/rJeQiYyCnp6EgLc) has a double-bearing that looks like it is too wide for the t-track slot to fit into.

[@chipsterb4946]

I had the same concern but double bearing should help.

[@SturmVogel1984]

Спасибо!!! Много видео смотрел, как сделать такой девайс, Ваша - самая оптимальная!

[@MARGINAL480]

Magnifique 👍👍 je fais le même ce week-end 👍👍👍

[@ganeshtn2098]

Indeed it would be very useful when we need👌👍❤😀😀😀😀😀

[@rustic35]

Simple jig of you've got every expensive tool in the hardware store. 🤣

[@HarlyGuy13]

Just may need one of these.

[@castlecodersltd]

Nice one, thanks for sharing 🙂

[@ВладимирРа-м3с]

Как всегда ВЕЛИКОЛЕПНО!

[@chinescalador]

Impressionante. Parabéns!

[@shripadlale7476]

Brilliant design!!

[@dennisfreitas7675]

This is going to be very handy for a project I’m working on 🤙🏼

[@oneconsc3333]

Tiu are incredibly creative, just amazing 🙏🏼💜🇨🇦

[@ДенисХудин-ж3к]

Это лучшее , что я видел по этой теме ! Однако есть вопрос - паз на шине не мешает подшипнику ? Показалось что он шире , чем высота подшипника.

[@-unity-]

Я так и не понял, что там за фреза такая странная. Мне показалось, что там два подшипника. Такое вообще бывает?

[@ricardoromeromercado7747]

Buenísimo 👏👏👏...felicitaciones desde Argentina. Lo haré para mi taller..

[@philbrandon0532]

I have an easier jig made up from aluminium extrusion 20*40 and it is 1000*1000mm for cutting out doors in vans etc. A smaller one of 400*400mm to use when doing smaller cutouts such as letter boxes etc. Much easier to use, hex key and corner brackets 👍

[@n513kk0]

That sound great. Where can I see the video or plans?

[@lylestavast7652]

That's a really great jig setup :)

[@customdesignnabelsi3613]

Belle job définitivement j’ai besoin d’un comme ça 👍🏾

[@morgan_BTS]

I really like your idea ! ❤️

[@redmi3701]

Крутая идея 👍👍👍👍

[@robslifting4life]

Awesome, awesome sauce.

[@a29miller]

Love the design and the execution of the video!! Well done

[@norbertgallice7769]

Very good work, bravo👏👏👍👍 Friendship to France....

[@bradgotschall3259]

Great idea!

[@susiehoule9222]

Génial pet très efficace et rapide 👍

[@CitizenAyellowblue]

As usual, a simple and elegant device! Thanks for showing us all, and best wishes from Australia.

[@yvesgosse3979]

Très belle réalisation

[@cyrilnorrie8450]

Your jig is not too hard to build, although the cuts must be accurately made but it is extremely well thought-out. Thanks so much for sharing your idea.

[@jimmartin1123]

Great jig! Could you post a link to the router bit you use? It has to be a flush trim bit and I can sort of see it at 5:57. Looks like it takes a really shallow cut. Maybe the bearing position is adjustable? Thanks, Jim

[@mnzrk]

You can see the bit at 4:54

[@jimmartin1123]

@@mnzrk Ha! Don't know how I missed that. So you take shallow passes and then the mortise itself becomes the pattern as you go deeper. Got it. Thank you!!!

[@Pitiloupdubois]

Top et les plans en partage encore mieux , merci

[@alfantebeite8659]

Wonderful!!!

[@АнтонГлухарев-в6ю]

Красавчик! Паретул отдыхает

[@cruzruiz3778]

Hola, GRINwood, que padre te ha quedado las plantilla, gracias por tus conocimientos y tú valioso tiempo.

[@evrohouse5626]

Красавчик гарний пристрій для такої праці 💛💙🇺🇦

[@MB-gf6zd]

Hello , first , many thanks to share Your ideas and Your projects , I have a question for You , where do You buy the T-Tracks You use in this project

[@DaveMead-i2w]

Hi - how do you avoid the router bit hitting the jig and gouging out junks of your guide? Especially if I only need a few mm routed out of the wood.

[@gregoryvpencheff3091]

Very clever! Thanks!

[@gunadil]

very usefull, thanks Sir 🙏

[@rhenepalmiano3371]

its just too simple to make, i loved it 👍👍👍

[@Habibulla.M]

Very nice design

[@yannickd7925]

Nice job 👍 😉

[@jalechavez6042]

A Great Tool...!!!...Gracias por Compartir.... Saludosss...!!!!

[@moovintruespace]

I finally made mine, using your method and hood on wood. Only issue.. What holesaw size did you use to fit in the forcener hole? Can anyone tell me, or do I have to buy the whole set, to get the right size to fit into the 35mm forcener hole? Thanks in advance

[@bradscopegems]

Where do you get the extra narrow T-track, 14mm wide and 10mm high? I have searched for hours on Amazon and eBay and all I can find is 19mm wide, which is too wide for this project, since standard router bits are not long enough to reach 19mm plus the required depth of cut.

[@Didier-yg3qi]

Good evening can you tell me where you got this strawberry, thank you in advance

[@anatolborowicz2294]

I really like this project and I want to do one too. Please provide the dimensions of the boards: width, length and thickness as well as the diameter of the large hole. Thank you and best regards. Andrew.

[@АлександрКошкадеров-т4л]

Сохраню и сделаю! 👍

[@anatolborowicz2294]

Super !! 👌

[@danluther9078]

Where are you getting all this white oak?

[@jeanpierreaguer2118]

Superbe travail !!!!

[@filsen4660]

Clever trick !!!!

[@isaacdelbosque6375]

Brilliant, thanks!!!

[@MCsCreations]

Brilliant, dude! Really fantastic work! 😃 Stay safe there with your family! 🖖😊

[@garycook9167]

Hi is the t track definitely 14mm wide? I can't find stock of that anywhere. Any ideas where to get it if so please?

[@woodworker168]

Я щойно знайшов ваші плани, дуже дякую! = i Just found yur plans, thank you so much! ~ 🛠Lisa♿

[@guillermomartinezyg.2547]

Great vid !