New Cyclone Dust Collector / Woodworking Essentials / Homemade / DIY

[@rickpieschek6851]

Best dust separator video Ive seen. well done

[@stormman8393]

There is Mr TAK and then there's the rest of us. Simply brilliant

[@KasevoTV]

Неплохо, но сложно для повтора в домашних условиях без специальных станков..

[@petec6690]

Have a friend who calls me "Genius". After watching this video - I'm no where CLOSE to being a "Genius". Totally amazing woodworking skills. And I love your sled too.

[@mikeknowlden9617]

Ok only half way thru the video and I think you are just showing off! Those tool ideas are great 👍

[@petediaz2388]

It don’t matter if he is showing off the tools. My concern is the efficiency of the dust collector. It looks like the sucking power is not there, there. Tools👍🏼, cyclone looks 👍🏼, efficient 👎🏻👎🏻👎🏻👎🏻👎🏻

[@mikeknowlden9617]

@petediaz2388 it looks Ike a 4" tube off of a harbor freight type unit. I've got one. Using the 3" makes it work much better, but overall it's still a good system. Mine keeps up with my 10/20 sander, or my planer or table saw. Haven't tried it with my lathe yet, and my system isn't that good as this dudes ! That table saw addition is what I want!

[@troychoina1686]

Dude, you're FREAKING AWESOME!! I'm not only amazed by your dust collection build but, right from the jump, the table saw "flip up" with the slide. was cool too. Just had to subscribe and hope to find instructions on all your jigs used. Look forward to learning from a TRUE Woodworker/Carpenter.

[@mikebingham469]

Nice design! And that circle cutting jig for your bandsaw is very slick!

[@reaper060670]

Brilliant job mate.. I love seeing ppl like ur good self building these things from scratch.. I salute u Sir from IRELAND!!!

[@dannybaker2763]

Nicely done. I shall try this on a smaller scale for my shop.

[@WoodworkingWarrior]

That circle jig is really cool!

[@josebrazdasilva5438]

Parabéns pelo seu trabalho, jesus Cristo continue te capacitando, o bom é que vc tem as ferramentas muito de qualidade gostei muito do seu trabalho, jesus Cristo te abençoe sempre 🙏

[@yuras_k]

Nice job! GoodLuck!

[@andreshiwa8821]

Very Nice Dust Collector! Also, I Love your table saw workbench! Do you have the plan/project to sell ? Thank you!

[@carpentak]

I don't sell plans. I can't make a plan. Sorry

[@MrDtproject]

Perfect 👍

[@tukangkayutaryosidomulyo3503]

Ikut nyimak ikut belajar,,, 🙏Mantap,,,👍👍👍

[@costsill]

Voce é muito caprichoso parabéns pelo trabalho

[@JamesCouch777]

Good idea 👍

[@philipchandler330]

Excellent

[@iarman8867]

Gut gemacht 👍.

[@DudleyThomas]

Pure Genius, but that is more work than most of us want to do...

[@ginorosa1795]

Awesome!

[@alsaffarstudios]

Very creative way to dust collector, thanks for sharing it with us. 🙏🏼

[@bradleytuckwell4854]

Great job your work and attention to detail is amazing I just found your channel and I’m so glad I can see I’m going to get a lot of knowledge from you thanks for sharing

[@rickhayhoe]

Cyclone dust collection devices represent a great improvement for a healthy woodshop environment, and yours appears to work extremely well, Mr TAK. Congratulations. Also it looks as if you can use it without a bag attached to your wall-mounted vacuum power unit. But is no very fine dust at all being ejected into the air? By now you would know whether deposits of dust are accreting in your shop. Before viewing your video, I was considering how to wall-mount my Makita 410 dust collector drawing air through a cyclone unit, but turned 90° with the dust bag attached underneath. Therefore, knowing about ejected fine dust is relevant. It would be convenient to forego hanging the bag onto the power unit.

[@carpentak]

Thank you for your valuable comments. My new cyclone dust collector is working very well and the air once filtered from this cyclone is blown out of the building. Of course, a dust collecting bag is installed outside, and fine dust can be found. However, the dust collector connected to the outside also functions as a ventilation fan, so the air in the workplace is maintained pleasantly.

[@rickhayhoe]

@@carpentak Thank you for your quick, informative reply, Mr TAK.

[@0kiruku]

Hi would like to know more about your setup for dust collection as I am planning to get makita 410, thanks

[@Romulkill6288]

Да , конечно это прекрасная демонстрация инструмента и навыков, но!!! Если есть такое оборудование и инструменты, почему бы просто взять и купить профессиональный циклон?

[@1959rossco]

Brilliant

[@Chalin59]

Felicidades maestro, me gustó mucho su trabajo, mi like. Saludos desde Veracruz, México.

[@AnoWiharja]

nice

[@Хлопотычастногодома]

Интересно, самодельный формат класс.

[@RixtronixLAB]

Nice video, thanks for sharing it :)

[@kris35x]

Mistrz ;)

[@ricardolacza]

God job, my friend. I would consider opening the windows from the inner sheet metal to the wall as the dust is seeping through it. What do you think?

[@carpentak]

I do not know. I am using it as it is now without any problems. Thank you friend.

[@yoonyangil948]

잘 하시네요.

[@ramosoficinadamadeira5510]

Ficou muito boa essa máquina 👏👏👏

[@Ritalie]

Is that a 14" table saw blade? That is huge!

[@carpentak]

no. It is a 10" table saw. Thanks.

[@jjmcrosbie]

I use diluted washing-up liquid. It's cheaper and works fine! A simple matter of surface tension. Works on bathroom mirrors after a shower, too.

[@dimanemalzev6165]

좋은 생각!

[@wiseoldfool]

Neat technique to get the right curve on the inlet pipe!

[@epinefryna]

Great, about those arc shape holes in the metal cover... There are some diameters and angles involved - any theory/data you can share or it was just to your eye?

[@carpentak]

I don't have any data on this. I made it by eye. Sorry I can't help you

[@epinefryna]

It is perfect answer, I don't have to bother about measurement in this case :-) Thank you :-)

[@wot8112]

МОЛОДЕЦ!

[@vietus1040]

New Cyclone Dust Collector / Woodworking Essentials / Homemade . Good video for watching. Watched the video January 19, 2021 very like. Thank you so much

[@Hangernade]

Now I need to also make your band saw circle cutting jig. Does it use a stop to position the workpiece or do you line it up by eye?

[@carpentak]

The circle cutting jig has a stopping block.

[@maurosantos1238]

Muito vem feito: é muito camprichoso é hobby….

[@leonjambondior-t6j]

merci, j'ai fait plus simple et c'est une réussite aussi, avec quelques coudes de 50mm un fut de 60l acier avec quatre roulettes je n'ai plus de poussières dans le sac de l'aspirateur .

[@jamesnasmith984]

That type of plastic sheet is not a product seen near me (vancouver). I love the fold-up sliding attachment on your table saw.

[@carpentak]

The flexible sheet is not plastic, but wood plywood. Thanks for the nice comments.

[@keupondestroy911]

Merci beaucoup pour la vidéo

[@АндрейПлатонов-ы3п]

Ну теперь, можно пилить не перепелить. )))

[@ivancho9375]

espero que no sea uno más de videos engañosos. Dios lo ha bendecido para compartir tus ideas

[@suktan78]

멋져부러요 진짜

[@ВячеславКаблаев]

Привет! Как мне у тебя дюже понравилось! И работа твоя и станки, инструмент! Вот только дюже толстый шланг. Им только улицы убирать. Но это, как я понял, будет стационарная установка. Но зачем такой толстый шланг? Успехов!

[@carpentak]

This is a 4 inch hose. This is the same size as the inlet on most woodworking dust collectors. And most of the larger woodworking equipment, not portable equipment, have a 4-inch outlet. Thank you

[@NataHuseynova]

ведро,точнее его короб это уже произведение а пылесос по сути у вас уже был,при таких масштабах работы это ведро очень быстро заполнится ,нааерное нужна бочка,но это вам решать,фишка в создании короба,инструменты супер ,это не любитель,респект

[@ramosoficinadamadeira5510]

Ficou muito bom 👏👏👏👏

[@GeorgeWHart-ws1zv]

유익한 영상 감사합니다. 잘 보았습니다. 6:00 부터 등장하는 탄성이 좋은 목재의 종류가 정말 궁금합니다. (합판처럼보이는데..) 무엇인지 알 수 있을까요? 목재상에서 구입할 수 있나요?

[@carpentak]

네 보통은 오징어합판 또는 요꼬합판이라고 부릅니다. 어느정도 규모있는 목재상에는 다 있습니다.

[@GeorgeWHart-ws1zv]

@@carpentak 감사합니다. (^^) 요꼬합판 요걸 몰랐네요.-오전에 구입완료! 너무 감사드려요. 유익한 콘텐츠 감사합니다. 친절한 답변 다시한번 감사드려요!!

[@funtymsforever605]

probably the best dust collector video I've seen. Then just pulls a latch and folds his sled out of the way and rips a board like it's old school.. but that's not all,,,,, he pulls out a WHAT!! F.O.A.S. yes a foas.....finger on a stick..... I will never spread caulk the old way.

[@funtymsforever605]

yes hit the subscribe button and a 👍

[@ЮрийВласов-ж1л]

Принцип работы циклона, отделение твердых частиц за счет центробежных сил при тангенсальном вводе и чем больше скорость входящего потока тем и эфективнее работа циклона. Поэтому диаметр всасывающего патрубка должен быть меньше выходного минимум в 3 раза.

[@carpentak]

ok thanks for the good info. I will refer to it the next time I make a cyclone again.

[@ЮрийВласов-ж1л]

@@carpentak Успехов и здоровья.

[@АлександрМарченко-ч4д]

Юрий доброго времени суток. У меня вопрос. Где можно узнать больше по поводу вашего рассуждения о диаметрах патрубков. Если вам будет удобно. За ранее спасибо.

[@БауржанИскаков-з9ж]

Да, и еще, можно было увеличить скорость вращения потока за счет сужения вниз всей камеры, сделать его конусом. А здесь есть один недостаток, это отверстие на крышке бака куда падают опилки, в этом месте образуются не нужные турбулентные потоки, из за которых часть пыли не падает в бак, а улетают дальше в пылесос.

[@DevonBowen]

What's that little white device on the front of your apron?

[@carpentak]

It is an outlet power remote control. With that I turn the dust collector on and off. This is an IKEA product.

[@joedance14]

Very ingenious techniques! Nice work! What material was used to form the cylinder? It has the appearance of a wood laminate, but it is much more flexible than any wood product I’ve seen.

[@carpentak]

It is a flexible plywood. It is a type of plywood that can be easily purchased here in Korea, but I do not know how it is in other countries. thank you.

[@joedance14]

@@carpentak Thanks!

[@billlichirie14]

The plywood is available in America it's called bendable plywood. All of the fibers are running in the same direction. I'm sure your wood dealer is aware of it.

[@vipstop2605]

Можно было эти сантехнические две детали присобачить к большому ведру. И получилось бы то же самое, но без лишней заморочке по созданию деревянного корпуса.

[@АлексейСедов-ы8ы]

Оборудование 5.за работу 2.по 5ти бальной шкале

[@隆武内]

サクション側をホース細くすると吸い込み威力増しますよ

[@CodyCloud]

Amazing, but too far beyond my current ability to be useful 😅 Maybe next year haha

[@ghyi-wh6ep]

안녕하세요? 동영상 잘보았습니다. 흡입관 길이는 14cm인데 싸이클론 외부 오징어합판 높이를 모르겠네요. 흡입관과 뚜껑 철판 사이의 간격이 궁금합니다.

[@carpentak]

네 오징어 합판의 높이는 215입니다. 사이 간격은 기억이 안나네요. 아마 50에서60 정도 일겁니다. 감사합니다

[@ИгорьБулгаков-т6у]

Good job Amigo! 👍👍👍👍👍

[@АлексН-я2ф]

За кисточку во время работы с клеями, другие приспособы при работе с синтетической химией, тебе большой "+"! Мастерство, как гутарят у нас на Руси, не пропьёшь.

[@ИгорьПрокушев-с1к]

Наши мастера валиком ПВА размазывают! Но древнее искусство пальцевания постичь очень сложно

[@АлексН-я2ф]

@@ИгорьПрокушев-с1к 😃

[@dieiuai-malebenselbstgebau1523]

A very nice work, you did there!!! What Motor do you use at the end?

[@carpentak]

It is a 1 horsepower dust collector motor. Thanks

[@dieiuai-malebenselbstgebau1523]

@@carpentak Thank you for answering. Where did you buy it?

[@carpentak]

I ordered online, but it seems like a company that doesn't ship overseas. m.smartstore.naver.com/backjeemt/products/758219397?NaPm=ct%3Dkxfkaugg%7Cci%3D0Ay0001chq5vB5DZyLlR%7Ctr%3Dpla%7Chk%3Dc6be3e9f2e40ede9858d027c9798ba03bfcfdf01

[@herkhaston1915]

@@carpentak how much in US $

[@carpentak]

May be 192$

[@abdolalighalavand240]

♥️🙋🙏

[@VadimBiliy]

👍👍👍👍

[@mysticswordsman]

Why did you leave that small around at the inlet? I just want to know if there is any mechanical advantage for it? Also great vid!

[@carpentak]

It improves the separation function of the cyclone. It is effective when the entrance is narrower than the exit. And if you narrow it down to a curved shape like this, the whirlwind becomes stronger.

[@Ritalie]

Beautiful project! It looks really professional. I am still so curious and confused why we have to build these at home. It's a fun project. But the dust extractor machines should include a proper cyclone separator when you purchase them. The dust collections systems being sold to the public are obsolete and are junk.

[@cdiddy536]

What material are you using for the wall of the separator? The flexible white sheet?

[@carpentak]

It is a wooden plywood for curved work. I am easy to find here in Korea.

[@billlichirie14]

It's called bendable plywood and disavailable in America; all of the fibers run in the same direction.

[@grumpyshorts1056]

sweet... Do you engineer all your own jigs? Or where do you get the plans from?

[@carpentak]

Yes, my jigs are engineered and made by myself.

[@ОлегКозаков-т5ф]

Прикольно) а что наш циклон из леруа уже не работает) в смысле из бочки, с таким инструментом можно поиграть, жалко у меня мастерская только в плане) красава 👍👍👍

[@keithgeorge2541]

Are there plans somewhere on constructing the entire baffle? How does one decide on the shape of the inlet hole cutout with the curved portion?

[@carpentak]

I'm not going to make a plan. The shape of the entrance can be made as shown on the screen. There is no exact shape or formula.

[@Realism91]

​@@carpentak Imagine not being able to learn by sight, it must be painful. But I guess people who sell plans make a fortune off them. I like that this design doesn't involve making a funnel shape.

[@luminousfractal420]

$400 for a small unit...or $30 for the 36" traffic cone. guess which i bought 😂

[@wilesnic2]

what is that super flexible ply and where can i find it?

[@carpentak]

It is sold everywhere in wood material shops here in Korea, but it is said that it is difficult to find in other countries.

[@billlichirie14]

It is called bendable plywood and is available in America. All the fibers are running in the same direction. Your wood dealer, I'm sure, has heard of it.

[@rinorain]

공캔은 어디서 구매해야하는건가요??ㅠ 찾아봐도 안나와서요~

[@carpentak]

저는 여기서 구입했습니다 m.shop.interpark.com/product/5043177486/0000100000

[@antoniof.hernandez6390]

Use it to ya advantage im bent n focused

[@backdesign4285]

유튜버님 저 송퐁기는 몇마력 얼마짜리인가용? 따라해보고싶습니다^^

[@carpentak]

네 제가 사용한건 1마력입니다.

[@yohok2971]

한솔케미컬 광고인가요? ㅋㅋㅋ

[@АлексейФадеев-ч4ш]

Супер,а что за материал который лобзиком пилил

[@ИгорьБулгаков-т6у]

Думаю фанера 2 или 3 мм

[@BobBlarneystone]

Alcohol will soften hotmelt glue and make it easy to peel away.

[@paulcotesr5623]

What the gallon size of that drum please

[@carpentak]

I don't know the size, it's just small.

[@robinsonreis471]

Could you make a video explaining how you collect dust from the Framing Miter Saw

[@carpentak]

Next time, I plan to find a better way to do that work and make it into a video. The current miter saw dust collection is not perfect. thanks

[@RayZde]

damn he made sliding panel saw.

[@СергейПономарев-с7ь]

👍👍👍😁👏👏👏

[@herkhaston1915]

Wait what was the air hose for

[@restovrator539]

Здравствуйте, на 7 минуте испольете прижимы с красными ручками, подскажите как называются и где купить такие

[@carpentak]

그것은 토글 클램프 입니다. 알리익스프레스에서 쉽게 구할 수 있습니다.

[@rusticagenerica]

Very beautiful build, but it doesn't seem powerful at all !! :-[

[@stephanlorenz9240]

Where did u bought the Motor for this Zyklon?

[@carpentak]

The motor is a blower motor for a 1hp dust collector. It is easily available at any woodworking shop.

[@stephanlorenz9240]

@@carpentak Did u Got a link for it ?

[@carpentak]

This is a Korean site. Please note that they do not ship overseas. m.smartstore.naver.com/backjeemt/products/758219397?NaPm=ct%3Dkxfkaugg%7Cci%3D0Ay0001chq5vB5DZyLlR%7Ctr%3Dpla%7Chk%3Dc6be3e9f2e40ede9858d027c9798ba03bfcfdf01

[@멍멍-z4m]

멋집니다 모터는 몇 마력짜리 인가요? 어떤 제품 인지 궁금하네요 알려주실 수 있나요?

[@carpentak]

네 1마력짜리 저렴이 인데 가성비는 나옵니다. m.smartstore.naver.com/backjeemt/products/758219397?NaPm=ct%3Dkxfkaugg%7Cci%3D0Ay0001chq5vB5DZyLlR%7Ctr%3Dpla%7Chk%3Dc6be3e9f2e40ede9858d027c9798ba03bfcfdf01

[@herkhaston1915]

Where do you buy the fan and bag ?

[@toadsprocket7598]

you buy a dustcollector without a cyclone and repurpose it. the harbor freight 2hp is commonly repurposed in the states

[@antoniopannese7052]

💪💪💪💪💪💯💯💯💯💯💯

[@christopherdekonstrukt444]

I don't think I can cut those circles on my 9" Grizzly, I'll use a plunge router with a spiral but and circle cutting jig.

[@ВладимирПупкин-ъ2г]

Мда, инструмента по стоимости на много денег, значит и производство не гаражное, отсюда: циклон с улиткой надо мощнее и разводку по всему цеху. Для меня лично и гаража более удачная конструкция у Михаила с HeArtWood c щелевым циклоном- и проще и меньше.

[@telosfd]

Take a like.

[@TV-gi7gc]

유연한 판자? 의 명칭 좀 알려주시면 감사드리겠습니다 잘몰라서.. ㅎ

[@carpentak]

네 요꼬합판 또는 오징어합판 이라고 부릅니다.

[@florinmacri72]

Hello! What type of extractor do you use?

[@carpentak]

Hello. I don't know how to explain, so I'm attaching a link to the blower I bought. m.smartstore.naver.com/backjeemt/products/758219397?NaPm=ct%3Dkxfkaugg%7Cci%3D0Ay0001chq5vB5DZyLlR%7Ctr%3Dpla%7Chk%3Dc6be3e9f2e40ede9858d027c9798ba03bfcfdf01

[@viki4837]

пойду на кухню повторю

[@toadsprocket7598]

how much of a gap between the metal lid and air outlet tube please?

[@carpentak]

It is 25 cm.

[@GameOverFam]

Мусор из мешка не показал, потому что много...

[@peterlarson9909]

Where's the shield?

[@carpentak]

The shield is at war with dust.

[@andrebubenik2413]

Perfeito!