Carpentry Tool trailer tour

[@wildwoodtop]

You're just an all-around wholesome Dude! 🤟

[@brianmurray667]

Good tour and trailer. It’s simply built but practical, allowing you to see all your tools and supplies.

[@ToddAndelin]

Damn good setup... watching this knowing I need to step up.... ugh just unloaded my tools in the rain from the back of my f-150...

[@MikaëlPerreault-f6g]

I love your setup its the best I've seen yet, thanks for all these tips

[@kenshelterra]

Good, functional trailer. Nice to see something that isn’t so “refined” as you called Ron Paulk’s trailers. Thanks Joe Handyman!

[@JamesBrown-ye1el]

Great set up! One suggestion for ya: get a spare tire holder for the tongue of the trailer for the spare. Gets you more of your 12 feet available inside.

[@drewclancy5174]

James Brown thanks, good suggestion!

[@jamescreedon5646]

I really like it you teaching the young, you go sir, well done on the trailer also

[@bigtime37ja]

Efficiency is all that matters. Nice job.

[@truthseeker412]

Nice build. Thanks for sharing.

[@sspencer7780]

Nice job on fitting it out

[@michalduchnowski9242]

Great video and trailer design loved it

[@drewclancy5174]

Michal Duchnowski thank you

[@caseycarlson8464]

Great video. How much weight in tools and plywood for the cabinets and drawers is added to the trailer?

[@nbkfj5r]

Nice job on trailer and video.

[@drewclancy5174]

Thanks JR. A new one is in the works.

[@krisramjit3656]

yout trailer is awsome love te work you did

[@MNCasaPro]

9:40 A great benefit of bins instead of drawers that you can see the stuff (also you can just reach in)

[@drewclancy5174]

I like to set the bin on the countertop to grab what I need and then put it back in place. It’s like having every drawer in the trailer right in the most convenient spot. Thanks!

[@petrbocek4311]

Great man, I like it a lot

[@rubenspr8046]

Nice set up

[@gilbertmatty5654]

Your set up is great, I'm also a trim carpenter, other set ups the tools are too hidden. And with yours you get to the jobsite, and you're able to setup and get to work.

[@drewclancy5174]

Thanks Gilbert Matty, I’m currently building out my new 6x12. I appreciate the input because I’m looking for the aspects I want to carry over to the new one 👍

[@ChrisKusmiesz]

This is a great set up! How wide is the work bench and how tall is the peg board? Im trying to do a similar set up. Thanks!

[@dannysiaumau5815]

Awesome trailer I'd like to build this same trailer to start out and then adjust to my work flow over time, do you have any dimensions on your build here?

[@christopherkouri2317]

Great video

[@BellaviaSigns]

looks awesome

[@drewclancy5174]

Thanks Bellavia Signs!

[@SiQuestForensics]

I like the shelving and choice of materials. Can you please tell me if your shelving corners and cross members are 2" x 3" or 2" x 4"? Also, how thick is your plywood for most of your shelves? 1/2"? 5/8"? Thanks.

[@drewclancy5174]

SiQuestForensics thank you. All tops and shelves are 5/8 CDX. Everything is sanded and got a 1/4” round over. I felt 3/4 was overkill for the short spans and counter top depths but I did use it for the cleats. Dividers are all 1/2” and the rack for the stands is all 2x4, some ripped to fit.

[@wooddawg4868]

Put a shore power plug and your good even more.

[@robertop8478]

Hey man like your trailer set up ,! Where’s the link for the ladder rack?

[@drewclancy5174]

Roberto P Boom! www.etrailer.com/Trailer-Cargo-Organizers/Packem/PK-28B.html

[@joaoandradecantor]

Can I use a jeep compass to pull a trailer like this?

[@drewclancy5174]

A Jeep compass should be more than capable as long as the trailer is not overloaded.

[@justinbailey2749]

Turn them nail guns upsidedown. You're welcome and great job 👍

[@timschrieber7379]

About how many sheets of plywood did you use on that? Absolutely love it! Just bought a 5'6"x10 yesterday and your video was my favorite setup and about the same size

[@drewclancy5174]

Thanks Tim, I think I used six sheets. 19/32 Rtd. sheathing. Works great for a trailer this size with 16 inch deep shelving. Good luck! I’d love to see how it turns out.

[@KevinDiaz-kz9lt]

What length screws did you used to attach to the walls of the trailer so as not to penetrate all the way through?

[@drewclancy5174]

On this trailer the metal wall studs are about an inch thick. So for 1/2” ply, 3/8” batten strips and 3/8” wall panels i used 1-1/2” screws.

[@KevinDiaz-kz9lt]

@@drewclancy5174 thanks the insight!

[@chrissd08]

curious about your old HF trailer. Looks like you swapped wheels/tires to larger size, did you swap the axle also?

[@erickramos314]

Can you stand in there? And how tall are you?

[@drewclancy5174]

This particular trailer has an interior height of 5’8” so fairly low.

[@MH-ol8we]

Nice job dude, just curious, do you need a ladder to get your ladders down? I also like the bins you used, will probably use them myself. Do you know you kind of sound like Billy Bob Thornton?

[@drewclancy5174]

😆 first time I’ve heard that. Yes, I use my 4’ ladder to climb up top but am bolting some brackets on so that’s no longer necessary.

[@ocd7036]

Nice

[@drewclancy5174]

thank you guys for liking my dad please like for more

[@evan5232]

weight when loaded?

[@drewclancy5174]

Im mostly guessing but I think it was only around 2000 pounds.

[@Warren3carpentry]

Great setup man! Its very similar to my trailer. I also did a couple walk through videos on mine too. Check out the vids if u get a chance!

[@drewclancy5174]

wait theres my brother hehe my names avery