CarPlay Stereo Upgrade for Honda Element w/HD TOUCHSCREEN | CARPURIDE YT09 Single Din w/ Rear Camera

[@PaulBarger]

Click here to get your own CARPURIDE Car Stereo here vvvvvvvvvv carpuride.com/?ref=mu4lg2qc PROMO CODE: MERRY30 There is a 30% limited time Christmas discount event this month, the lowest price once a year, you can use the discount code: MERRY30 This link takes you to the exact single DIN model I installed in this video; carpuride.com/collections/carpuride-single-double-din-car-stereo/products/carpuride-yt09-single-din-car-stereo-with-wireless-apple-carplay-android-auto-9-ips-touch-screen-gps-navigation-bt-usb-fm-rear-camera-swc?ref=mu4lg2qc The wiring harness I used. Plug and play. Metra 70-7863 Amplifier Retention Wire Harness for 2003-2011 Honda Element amzn.to/3RFgM8E The installation kit I used in the Element; Scosche HA1701B Compatible with 2003-06 Honda Element ISO Double DIN & DIN+Pocket Dash Kit Black amzn.to/3GDE9cz The best ways to support the channel: www.paypal.me/breadtrucker $breadtrucker on CashApp Bitcoin Address - 34wFMf4qXp6eFnrZg7wWi5cpHqSJjhLHx7 @breadtrucker on Venmo IG: @hondabug Twitter: @breadtrucker Facebook: facebook.com/breadtrucker/ Amazon wish list: a.co/b0UGeHG #hondaelement #carstereo #carplay #carpuride

[@bigjohn75]

That was one of the best car I ever had.

[@PaulBarger]

The Honda Element is a terrific car! We sought one out specifically.

[@TryMyMartini]

@@PaulBarger I'm currently on the hunt.

[@FTRVDenny]

That's a nice new stereo. The only issue I find is when I'm programming new keys to a lot of vehicles with aftermarket Stereos, especially Honda, It sometimes requires me to reinstall the original stereo to program a key because of the anti theft system.

[@PaulBarger]

Luckily, I did not run into that problem with this system and vehicle.

[@NinthElement]

Love you Kids, can't wait to see you. Cheers!

[@PaulBarger]

Hey! The Ninth Element commenting on my Element video! Neato. Love you too!

[@akant74]

Also did you get the steering wheel volume controls working? Where did you connect?

[@broofa]

Were you able to get the radio controls on the steering wheel (“CH”, “VOL”, and “AM/FM”) to work? That was the main issue I had when I tried replacing the radio on my element. I’m still looking for a system that integrates well with all of the OEM speakers and controls.

[@PaulBarger]

Our Element doesn’t have steering wheel controls.

[@jerryslater5173]

Merry Christmas

[@erikjassielcardenasosorio]

Is it also compatible with the 2004 element?

[@jollino]

How did you enable the button that shows the volume settings? It doesn't seem to be on my YT09

[@PaulBarger]

It’s on the left side of the screen. Just tap there. There is no button until you tap empty space.

[@jollino]

@@PaulBarger That doesn't seem to happen on mine, and I also can't set specific volumes within iOS (e.g. music is loud but calls and Siri are very low). May I ask what software version your unit is running? Mine says so: SDK Version: 54.0.17.0.0.1.12.2 CUST Version: LT101-V1.07 MCU Version: LT-YT921-007-V1.06

[@jollino]

@@PaulBarger Not on mine, oddly enough. It looks like AssistiveTouch on iOS though, which is even odder since it triggers the Carpuride interface (and even that's different on my unit)

[@akant74]

Did you have an issues with static hissing through your speakers once installed? I bought the same head unit and I am trying to install into a 2011 element (with sub woofer) and I immediately get a constant hiss from my speakers once the stereo turns on.

[@PaulBarger]

No. The sound is nice through the speakers. I didn’t experience the same hissing you describe

[@akant74]

@@PaulBarger I am a car stereo noob.. I think the issue is the stock amp in the Element combined with my carpuride head unit are causing things to be double amped. I should have used all of the rca ports off the head unit which I believe are not amped. I actually hard wired it into the head units harness so I could get all the channels... I thought that was thr only way to keep fade ..etc

[@PaulBarger]

I didn’t even see a fade or balance option on the carpuride head unit. How do I find it?

[@akant74]

@@PaulBarger go to the equalizer screen and the click the radio wave looking icon at the top right.

[@PaulBarger]

Oh nice! I will look for that!!!

[@tamismith1373]

Where did you get those cool seat covers!?

[@PaulBarger]

They were on the car when we got it

[@ibdribbles7128]

Really not excited about the screen protruding from the console/dash. Just seems odd. Would rather have a flushed setting

[@PaulBarger]

One nice thing about it is that I can angle the screen any direction I’d like. Sometimes at night, when I’ve been driving a long time, it’s nice to angle it away from me.

[@truckercai3571]

Is it a removable radio?

[@PaulBarger]

No