Nice attempt to fix it. The song is what this video awesome!
@kwakgreen4 жыл бұрын
As all FORD ST owners will tell you and I'm no different this is problematic. Went to my Ford stealership asked how much to replace drivers side scuff plate £150. £200 for passenger side turned around and left, it will stay unlit, that said now having seen this guy attempting to repair I will have a closer look at what might be causing the problem. By the way mate great video.
@CarRambles4 жыл бұрын
You can tear the light apart and replace your own led strip inside it :) it can be done, will explore in the future if another one breaks :) Thanks for watching!
@Scottish199610 ай бұрын
It’s just a fuse is it not? New fuse and it will light up again
@fordyford5 жыл бұрын
Top intro. Great fail video though. You always see shit that goes to plan and just works. I like that you tried and it didn't work. Good stuff.
@CarRambles5 жыл бұрын
Well hopefully people can still learn from it ;) Thanks for watching !
@fordyford5 жыл бұрын
@@CarRambles i always wondered if the Australian delivered model had the wiring harness for the light up strips, we didn't get the light up strips themselves but now I know how to take that side trim off to see the plug is there so cheers.
@robsmith74305 жыл бұрын
Strip off the metal top and install a red led strip then solder in original connections, it worked for me and it’s a really cheap fix 👍
@CarRambles5 жыл бұрын
I'll try this that's mate
@CarRambles5 жыл бұрын
Solder the connections into the original wiring?
@robsmith74305 жыл бұрын
Car Rambles yep cut the led strip to size, peel the copper strip on the original connection and solder that direct to the led strip. I got sick of going back to ford to have them replaced
@CarRambles5 жыл бұрын
@@robsmith7430 so expensive for what it is, ok so you soldered it to the copper wire, that's interesting :) thanks
@wilsonwong85603 жыл бұрын
Idea is good but bad focus in the video....
@phillip63564 жыл бұрын
Just repaired mine. An led had a soldered joint broken. The key to getting in side them is to use a flat non sharp blade to lift the top metal decorative strip off. Under this is a plastic cover glued. You have to carefully cut this and flap it back. Then you will see the 12 LEDs. Which you will need a magnifying glass to resolder them . Very cheap poor design..... Oh and for testing off car use a pp3 9v battery .
@CarRambles4 жыл бұрын
You are a better man than myself aha
@Ireland1035 жыл бұрын
Good attempt dude
@GaryWilkinson-oo7fkАй бұрын
I’ve seen these really cool sill leds on facebook. The strips have super strong magnets and sensors so they light up when the door is opened. They have there own in built power supply and light setting, they have a USB port to charge the internal battery when low. Will these not do the job the build quality looks good and not cheap and tacky plus no having to splice wires.
@KillerStidge3 ай бұрын
Ive taken these apart fully, they fail further in on a mini circuit near the smd’s but once the unit is dismantled it never really goes back together - if anyone elses fails just buy an aftermarket set
@Nor4x4Way5 жыл бұрын
you saved me a fortune
@CarRambles5 жыл бұрын
Aha I'm glad you managed it, I failed horribly!
@minifridge24964 жыл бұрын
How‘d you get it done?
@sashaghovanlou81754 ай бұрын
Great attempt buddy! Buy yourself some flux for future soldering projects, it will make your life alot easier!
@nijjyspiers735 жыл бұрын
Unlucky pal, you tried, I can't be arsed with mine, I feel that if I keep polishing the sills, light Will eventually break through lol
@CarRambles5 жыл бұрын
Aha well I might have a bodge fix planned.... Stay tuned! Aha
@nijjyspiers735 жыл бұрын
@@CarRambles what wind deflectors do you have?
@CarRambles5 жыл бұрын
@@nijjyspiers73 climair. Best ones you can buy for a fiesta. I have a video on my channel from back in the day :)
@zSiiLKy4 жыл бұрын
Nice attempt dude. Very nice video. Do you know what these are called exactly or a part number maybe i can find one online for sale?
@KingOfCaz5 жыл бұрын
How did you get the connector off?
@leweswalden802 жыл бұрын
what exhaust u running
@CarRambles2 жыл бұрын
Miltek race with miltek spots cat
@leweswalden802 жыл бұрын
@@CarRambles do you know where i can get miltek race exhaust system from ???
@CarRambles2 жыл бұрын
Pretty much every parts dealer that does fiesta st parts.... Look for miltek non res race..
@Nor4x4Way5 жыл бұрын
cut it open :D solder inside
@mattmcmanus23844 жыл бұрын
Ad dynamics repair these for 30 quid.
@CarRambles4 жыл бұрын
Yeah I could pop these apart and install my own led strip... Just wanted it to work OEM if I could :)
@COOMANSIN5 жыл бұрын
£214 for genuine new!!!!!!!!
@CarRambles5 жыл бұрын
Try to find a second hand one or pick yourself up a set of Autobeam Ambient door sills!