I’ve been putting this job off for months but now I’ve seen how easy it is, I’ll give a go tomorrow in daylight. Thank you!
@meme-sb4cz3 жыл бұрын
Well that was easy! Job done!
@Unknown651513 жыл бұрын
@@meme-sb4cz Caused nothing but problems on my car, got them fitted.. then the window wouldn't open, only on the drivers side though, I give up lol
@mikeyduncan4742 жыл бұрын
Hi mate. I tried to fit mine at the weekend. I've got the correct ones for mk8 fiesta and followed your instructions - starting from mirror and working towards handle side. It all seems OK however the side that slots into the mirror (the "vertical" bit) at the A pillar, seems too big. That part of the deflector that it "chaffed', to allow it to slot into the channel, is just a little too big. I've really tried forcing it in but I can still see a fair bit of the 'chaffed' plastic. It's as if it's too wide to fit into the A pillar area. I wasn't expecting to see any of the chaffed bits after fitting. The window didn't want to go up any higher than 75% after I'd fitted it (clearly fitted it wrongly)... Yet it looks so easy when you fitted it in your video.... Any help would be appreciated 👍
@stevenb92402 жыл бұрын
I got the same problem on my mk8 did you fixed it and what was the solution?
@mikeyd54862 жыл бұрын
@@stevenb9240 unfortunately not mate and not gonna bother fitting any now. Kinda went off them. Looks better without imo. Cheers and good luck!
@JTab432 жыл бұрын
I have the same problem with my mk8 must be something in the design
@petrusesterhuyzen2087 Жыл бұрын
It would be great if video was more "close-up" with intial point of installation, especially mirror area.
@IFBBProLinny4 жыл бұрын
I tried to fit on my A3, tried pushing it in from door handle-mirror. Result was when the window went up, came back down again, & also creaked. Will try this way 🤞
@felonymelody47733 жыл бұрын
Mine came down when I was opening my window before washing my car in a wash hall lol
@LarsH-y7l3 ай бұрын
Thanks! Finally a clear and precise instruction. I had trouble getting right with my last cars and managed after some tries. But not the way shown in the video. Just !!! and suddenly it was correct, but how did I do it? Found this video because I have bought another car. This time it's gonna be a breeze installing.
@observer61795 жыл бұрын
I tried the HEKO deflectors on my BMW 318i and they were fine for a few months, but when exposed to the summer heat and then cooler winter weather, they come loose after a while suggesting that they are very dependent on the adhesive, which fails to hold them in place. The fit is not that snug and the other morning the driver deflector flew off and away (after a year). I ordered the Climair and hopefully they would prevail as a superior brand. I will comment after a year passes. Good video however, a follow up after a year or so would be nice. Thanks again.
@CarRambles5 жыл бұрын
I can only comment for ford quality wise but fingers crossed they are much better for you!!! Let me know how you get on!
@soots-stayingoutofthespotl54954 жыл бұрын
Has a year passed now Royston?
@CarRambles4 жыл бұрын
Aha
@bobdigi5004 жыл бұрын
@@soots-stayingoutofthespotl5495 it's been a year, this man lied
@Nyle952 жыл бұрын
We need a reply!
@zintex86 жыл бұрын
Good video. Completely cleared up whatever sign language was going on in the instructions that came with the product. By the end did you still experience a bit of contact between the windshield and the deflector? I had a bit of scraping on the door handle side of it.
@CarRambles6 жыл бұрын
A small amount. All I can suggest is leaving your window up for at least 24 hours to re mold your rubbers a little if you've only just installed them. They should soon fit a bit better over time especially heko ones. I found climair to be a better fit out the box. Thanks for watching!
@zintex86 жыл бұрын
@@CarRambles Thanks for the quick response! I got the clim airs as well. I had just mounted them, when I wrote you, so I trust it will get better. I actually mounted them on the parking lot of the package pickup, I was that excited, lol :P
@CarRambles6 жыл бұрын
@@zintex8 aha good man. What car you got?
@zintex86 жыл бұрын
@@CarRambles 2016 Fiesta ST2 :)
@CarRambles6 жыл бұрын
@@zintex8 Excellent choice! ;) Remember to subscribe!
@admiralaladeen96 Жыл бұрын
Bought heko ones and ended up breaking two front ones during installation, I had put the part near the wing mirror in the window channel, is it suppose to go outside the window channel? No one seems to really emphasise this °
@garydeandeery5 жыл бұрын
Nice video I just got mine and had to see how to fit coz I was worried about bending it lol so look good when done
@fordyford5 жыл бұрын
I have these. I get a lot of rattle, more so when the window is slightly down. I also have to edge the window up, especially on a hot day or the window just goes 3/4 down automatically.
@CarRambles5 жыл бұрын
Climair or heko?
@fordyford5 жыл бұрын
@@CarRambles Climair
@CarRambles5 жыл бұрын
@@fordyford that's interesting, I haven't heard climair having many problems at all. Normally it's heko ones with the fitment problems / blowing out while driving :/
@CarRambles5 жыл бұрын
You should be able to reset the window height, I think you pull back on the switch and hold it for 3 seconds once the window is up? Try that. If not Google for how to reset window height :)
@fordyford5 жыл бұрын
@@CarRambles I don't think they will fly out at all, just a bit annoying with the rattle and the fact you can't regularly just put the window up all the way in one go. Just a tiny inconvenience really. They look great and do the job otherwise.
@tomt0y5 жыл бұрын
Have you had any scratches on the top of the windows from them? I've heard they leave a fair bit of small scratches.
@CarRambles5 жыл бұрын
All wind deflectors will scratch your glass. You can try to prevent this by cleaning the windows and where the window slots into regularly :)
@e90-p4p5 жыл бұрын
What do you do if after 24 hours the windows still won’t go up automatically?
@CarRambles5 жыл бұрын
Reset the sensor. To do so, hold the button all the way down, let go, hold the button fully down for about 10 seconds, then hold the button the go all the way up, release and press up and hold up again for 10 seconds. That should reset the height sensor.
@e90-p4p5 жыл бұрын
Car Rambles your not the first person to suggest this but it still doesn’t work.
@katywells68223 жыл бұрын
I bought some, fitted them. Windows really struggle and go up so slowly. I fixed this problem by taking them off and putting them back in the box and sending them back. Sorted!
@CarRambles3 жыл бұрын
🤦🏻♂️ you need to reset the window height by holding the button for a short period of time. It then resets its height. Oh well
@rhyswilliams31146 жыл бұрын
Did you find they rattled when driving? When I got heko ones I got clips to hold it in place but noticed I haven't with climair. Are they not needed?
@CarRambles6 жыл бұрын
Nope climair ones are made to fit unlike heko ;) you'll be fine with no clips!
@CarRambles6 жыл бұрын
Also no rattling either fully down or fully up :) hope this helps. Remember to subscribe!
@Mcfc2Rich6 жыл бұрын
Heko are crap. Mine blew off
@CarRambles6 жыл бұрын
@@Mcfc2Rich cheaper price normally so.... 🤷🏻♂️ I would rather fit the official items if available
@garydeandeery5 жыл бұрын
I heard the other male was cheap coz other had problems I went for this make climair and works great with no clips
@mikeyduncan4742 жыл бұрын
Wait a minute!!! Tell me I've been doing mine wrong!!! When fitting, I slotted the deflector into the outer rubber.... Should I be fitting into the inner rubber??
@CarRambles2 жыл бұрын
Give that a try. I can't remember exactly but if the product is correct for the car it definitely should fit, you can have to reset the height of the windows once in if they continue to go back down. I'm pretty sure a quick Google search can tell you how.
@mikeyduncan4742 жыл бұрын
Excellent video. Thanks 👌
@vaughannewton44304 жыл бұрын
What can you do to stop people from steeling them because my truck ones were just pulled out and off they went little rascals is it worthwhile putting some gorilla glue on the clips or no .
@CarRambles4 жыл бұрын
I mean feel free to glue them if you really want but it will just cause more damage when they tug at them :/
@vaughannewton44304 жыл бұрын
@@CarRambles I know what you mean but it is terrible when you get back to your pride and joy and some got has nicked them cheers mate.
@CarRambles4 жыл бұрын
@@vaughannewton4430 completely agree :/
@IFBBProLinny4 жыл бұрын
Damn it went into the housing properly this time.....but when window was going up, the bottom edge of plastic near wing mirror, sent the window back down again 🤦🏻♀️
@CarRambles4 жыл бұрын
I don't know what to say lol. Message me on Instagram if you need anything
@numatod3 жыл бұрын
Hi! Good job thx. Are they black or gray ones ?
@CarRambles3 жыл бұрын
Black
@numatod3 жыл бұрын
Thanks for answer. Looks great. Ordered the same
@daveritchiepaterson35696 жыл бұрын
Got the heko ones tried with and without clips window goes up but not as tight without them. I think it's affecting the alarm as only getting two flashes instead of three from indicator on locking. I have a fiesta st3 is there anyway round this and are the clim air a better fit?
@CarRambles6 жыл бұрын
The climair are a much much better fit
@daveritchiepaterson35696 жыл бұрын
@@CarRambles no issues with the windows going right up therefore affecting the alarm then. Sounds like spending the extra pennies on the clim air ones is worth while.
@CarRambles6 жыл бұрын
@@daveritchiepaterson3569 spend a little more on alot and you get better quality 😏 No issues with the alarm. Just had to edge it up like you saw in the video and let them set for 24 hours and haven't had any problems since
@daveritchiepaterson35696 жыл бұрын
@@CarRambles perfect thanks mate will give the clim air ones a try is it just an adhesive strip that holds them on or are they such a good fit nothing is needed?
@CarRambles6 жыл бұрын
@@daveritchiepaterson3569 think they are just slot in and push fit. If you have heko ones, with the door (I think open,maybe closed) try pulling back on the window up switch and hold it back until it's up the top. Wait 3 seconds and then release. They should set the new height of your windows.. give that a try before buying new ones incase it fixes the problem
@grizzly99605 жыл бұрын
Does the wind deflector sit inside the channel the window goes into?
@CarRambles5 жыл бұрын
Yep sure does :)
@philmufc16 жыл бұрын
Clipped in my climair,but can’t get the window to go up properly :( what am I doing wrong?
@CarRambles6 жыл бұрын
Ok so ensure its fitted correctly, then the first thing to try is to edge the window up like I do in the video slowly until it reaches the top then leave it. Check the rubber strip is seated correctly also inside the door frame. If that doesn't work reply here or on my Instagram and I'll tell you how to re teach your windows.
@philmufc16 жыл бұрын
Thanks!
@Devil_ytD4 жыл бұрын
Where did u buy these from? I’ve tried ordering clim air ones for my ST and can’t find the right fit anywhere? It’s the same as yours but in red
@CarRambles4 жыл бұрын
I ordered them direct from clim air :)
@Devil_ytD4 жыл бұрын
Car Rambles thanks mate, just ordered mine can’t wait to get them on!
@josephsalter8283 жыл бұрын
You say the teak heko work the same as climair but don’t team heko have clips?
@CarRambles3 жыл бұрын
They do which damage the rubbers in the door, that's the only difference
@Nyle952 жыл бұрын
Climair vs Heko?
@louis143673 жыл бұрын
Thanks bro 👍
@pointyspider46 жыл бұрын
Do you need to declare wind deflectors on insurance?
@CarRambles6 жыл бұрын
Juxta ' I think the golden rule is to declare everything but I highly doubt they would pull you up on it
@robbanks506 жыл бұрын
Thanks for this video, I've got some climair ones ordered through my local Evans and halshaw ford dealer.I will be fitting them tomorrow
@CarRambles6 жыл бұрын
Awesome to hear man, if you need any help let me know. Super easy though. Subscribe :)
@robbanks506 жыл бұрын
Car Rambles ST was very easy to fit and take off, had them stolen already. I wont be buying them again even though I did like the look of them
@CarRambles6 жыл бұрын
robbanks50 sorry to hear that man. Scummy people around
@robbanks506 жыл бұрын
Car Rambles ST thanks chief, yes plenty of thieving scum about hopefully karma will bite them in the ass one day. Your new dipped beams look cool are they as good as they look? I think the stock dipped beam is very poor.
@CarRambles6 жыл бұрын
robbanks50 to be honest haven't tested them on the road just yet, only on the drive as my alloys are away getting refurbed. Will let you know! On the drive they seem to shine much further though