4WD Bronco Power Wheels Go Kart TRANSFORMATION! Paint and Finishing Touches!

[@CarsandCameras]

Almost ready for the track! Considering its size, this thing has turned out great!

[@connersecor2018]

Yesssss. :)

[@ejayd4293]

Just add 8 inches to the chassis.....make it a little longer so you can really enjoy it....what's the point of making something only one person can comfortably ride.....that sucks!!!!!

[@DetroitMicroSound]

I still can't understand why you haven't added a few extra inches to the frame length... 🤔🤷‍♂️

[@DetroitMicroSound]

Btw, I bet Steel-It would sponsor you...... And they make the best finishes for cage, suspension, etc... finishes designed specifically for your needs. 👍

[@Mike-iq7hu]

That came out the year I was born dammmmn

[@JJ--CAR]

I want a ike vs john build. Have Taylor and other guys help. Then have a winner on looks and one on time clock. Just a thought

[@rockwolfdesigns6384]

Go-karts, mini-bikes, power wheels, crosskarts? Decisions decisions...

[@rileyhowser2709]

This needs to happen!!

[@legojoe2011]

BUILD OFF! BUILD OFF! BUILD OFF! BUILD OFF!

[@JJ--CAR]

@Josh Aubrey lol normally i would agree but when they disagreed on the color it got me thinking. Cheers

[@JJ--CAR]

@@rockwolfdesigns6384 hmmmm not sure. i personally would lkke to see minibikes but would be happy with anything.

[@bryduhbikeguy]

I still say you'd be better off with adding 1 foot to the frame,behind the sprockets,for leg room.You'll be able to tip the steering down a hair so it doesn't bind as well.You already need a piece of plastic between front and back anyway,so why not?

[@pressureline5320]

Even 6" would make it more comfortable for John, would probably need that 1' for Isaac.

[@SportbikerNZ]

Disagree. Violates their whole objective from the outset to build one of the smallest 4x4's around. Common sense says at least give it a good run before making such a change.

[@kennycampbelljr5896]

Couldn't agree more. I thought the same thing way back.

[@lizzard7473]

TINY LIGHTWEIGHT 4X4!!! Lots of people here seem to have forgotten what this started out as and the intended goal. This is the smallest power wheels car that power wheels makes. The goal of this project was to keep it as small, compact, and lightweight as possible while providing a single adult with 4 wheel drive. Stretching the frame would make fitting easier, but totally defeats the goal. These guys have done an excellent job. I'm impressed.

[@joshbullers14]

Guys here a cool tip for painting wheels when the tires are mounted, get a deck of cards and just slide em in between the tire bead and wheel, u can reuse em too after the paint dries

[@carbide1968]

Nice tip.

[@josedeleon9402]

Hells bells thanks buddy.

[@Hitycooking]

kzbin.info/www/bejne/pp7IaHmApJJomZat3

[@jordantractorvlogs7008]

Deck cards are to small i like index cards more covrage less over spray

[@josephdougherty2399]

I just smear vaseline on the tires ....it just wipes off

[@WTank109]

Yeah I agree with another comentoryou sould just extend the frame by a foot that would give you the room you need without makeing it way too big yo look outa scale still great content as always

[@brandonfloyd6321]

Just split like a 1" piece of pvc and lay over pipes you think a chain could slap. It will act like a chain slide

[@jackbelk8527]

PEX even better.

[@gankylyfe9692]

Just add a tensioner

[@RiverValleyLandscaping]

I agree my dirt bike basically has a plastic bushing couple inches away over the chain in case it jumps

[@Pittsburgh-412]

Ever considered watching grindhard plumbing? They're the kings at this stuff and can teach all of us a ton

[@Crouse_Property_Maintenance]

Translation: Yinz guys need a watch dem Grind Hard boys. Yinz look like dunces 'n 'at.

[@troythornburg9709]

You guys should build a sick mini chopper!

[@SportbikerNZ]

Glad you guys have kept it small per your original goals. It's definitely one of the smallest in class and that makes it unique.

[@josedeleon9402]

The way John sat on it at the end made with his legs outside of the interior made me wonder what if you did fold out foot pegs on the sides? Then you can rock that body while riding similar to the 3 wheelers. Also, in Michigan rolling on tractor paint works great and isn't messy like spray. We use it on off road and derby cars because its very cheap and durable.

[@billthompson7164]

The bronco chassis looks awesome and fits John well now you two should build an identical one for Isaac just a foot or so longer

[@braydondorgelo6649]

awesome build! one suggestion that would really stand out: make a bonnet scoop on the hood. This would cover the engine up. For the windshield, you could use a piece of aluminum and then you won't have the problem of melting plastics 👍

[@scrapyardgarage119]

I agree with the windshield, it’s a must.

[@suburban_life]

Love it! I so want to see a Grind Hard Plumbing Co/Cars & Cameras collab!

[@donbot5000]

They could learn ALOT from GHPC...

[@rockwolfdesigns6384]

Only problem is they live 2500 miles apart

[@jaimebadillojrjbj]

Beautiful job on that body guys awesome paint job

[@Fungusamnguss]

Love these slightly longer videos. Bronco looking great

[@toshayonguard4253]

You can always make a Skid Plate for the Sprocket like Honda did on My 125 Atc and My 250R...🤟🏻🇺🇸🇺🇸🇺🇸

[@lmmryan8468]

Been following you guys since part 1 of the rat rod wagon build.

[@MrGOTJOE]

So glad you guys are back on this project. It looks great. Wish that steering was a little better, looks like your turning radius is minimal.

[@nicsands3700]

Great video. Long time watcher, first time commenter. I like to use "rebar tie wire" when hanging parts to paint. It's super cheep and just a quick twist to tie them off. Saves a lot of time fussing over a knot.

[@nybergsgarage]

Long time watcher, first time commenter... Hee hee is this a talk show?

[@alexroy7695]

That thing looks like a lot of fun!

[@benq8618]

Long time viewer here, been here since Ike’s 50 dollar go cart. I love the new builds that are being made but I miss the old builds like the old radio flyer go cart and the barn finds. I would definitely like to see more of that! Keep up the good content👍

[@joshvandruff1790]

Seeing this come together is awesome! I wanna ride it!

[@MarkLoves2Fly]

Nice work on the paint scheme. "Issac, It'll be fine!" :D But seriously, the black, and bronze colors work well together.

[@alfredmcgee8491]

I luv that bronze color better then regular black

[@cyclone3999]

honestly, if you guys took this same design and scaled it up to be bigger, itd have the potential to be a pretty sick trophy truck cart.

[@JamesCouch777]

Give the camera person a high five ✋ they do a great job 👍

[@jaimebergeron3348]

Awesome job on this it looks so good.... i wanna see an over powerd old school moped in the future

[@1hipcrip771]

Good call on the hammered paint! Love the look!!!

[@만든다이]

4wd is amazing for this small go kart.

[@josephdougherty2399]

Hey guys, really enjoy both yours and Ike's channels. As I was watching the steering struggle this time I got to thinking about the way many old cars set up their linkage. They often had their steering box toward the back of the engine with a push pull bar to 90° bell crank up by the axel to transfer motion from forward/back to side to side ... I'm the last guy to tell anyone how to do something....I'm not there in person to really say,. Just an idea for consideration

[@colinroddy5772]

That thing is turning out awesome!

[@orionbennett7343]

I agree ... it needs even a chopped up hood. It needs the windshield, and it needs to spread the gap of the body between the back and front.

[@t-townmini4939]

I'm glad you guys are finally going to use some Chain Lube on one of your projects, at least. That chain Wax is the best choice. But, you've GOT to also start using a pre-filter over those foam air-filters. Never use a paper element filter in the dirt and especially wet muddy conditions. Use a good filter oil on your foam filters and put the pre-filter over that. And, CLEAN them after every good thrashing, too. I have an Outerwears pre-filter I can give you but, I'm sure Go Powersports has their version they'd be glad to supply for you. Get a bunch of them and put a clean one on every time you ride. PLEASE!

[@bwxmoto]

What sprocket is on the torque converter driven shaft? You could stick an 8 tooth on there to gear down and use a smaller rear for clearance.

[@andrewpearce5397]

Been watching y’all since 10k subs and I have to say the filming and editing is almost flawless I look forward to every video

[@gankylyfe9692]

Love using hammer paint 🎨😉

[@gankylyfe9692]

There's some tension between these two

[@gankylyfe9692]

Ike - no mask painting? It'll be fine

[@henryescat1104]

Y'all should make some DIAMOND PLATE door thresholds, to connect the body parts together.

[@MoondyneJoe]

Looking great guys and I have to say Ike you look a lot like Russell Crowe with your beard!! Tony from Western Australia 🇦🇺

[@chadneuman1945]

I learn so much from these guys

[@WrenchAtHome]

That beard is getting serious Ike, it looks good on you! Awesome build guys, keep it up

[@nybergsgarage]

He should rename his channel "Ikes and Beards"...

[@tkskagen]

The White Wheels are VERY reminiscent of BIGFOOT! Good Luck finding THAT Body...😿

[@liamdtraxxas2011]

I think you and grind hard plumbing are the too most honest youtubers I'm subscribed to yoh dnt bitch about other youtubers, you too are just honest people trying to make a living, lov the vids keep thm coming 👍

[@tributeinteriorsSTL]

Any chance you can give it a body lift to get the clearance for the hood/windshield. Just for testing purposes...

[@robertbelote5273]

Good work guys.

[@hustleman3548]

Hey good afternoon friends I enjoy show u host I love episode so cool nice in good day and great job and bless one

[@nme1605]

All maxima products are amazing but especially the chain wax. I've been using it for 30ish years?

[@de04609]

This windshield! Lol you guys are awesome, I hope you love making videos/mini everythings, are able to do it for a long time and make ridiculous money doing it.

[@ouradventures1329]

I agree with John the color looks great

[@GodschildinNC]

Good job! Really like the way it looks. If you can line up the front and back better, it would be good.

[@P8FPV]

Dang I thought I was going to see it drive too..cant have everything ehh. I like the colours 😉

[@buck0145]

The bronco has came so far

[@VermontPaintandPhoto]

nice paint makes them go faster

[@jeffreymurdock8366]

The look on Ikes face when you said he would chug that 2 liter. Priceless.

[@teamxj987]

Gotta agree with Ike chain wax is the way to go. Only problem is it stinks almost worse than gear oil

[@aidancampbell2656]

That’s a huge turbo

[@mynameisnotbubby]

Hey guys looks awesome! Most complicated build yet! Would you consider builing a sit in 3 wheeler?

[@Idkmusic272]

Cool finaly I was waiting!

[@russfolts4531]

With those tight spaces, some good engineering. More so with 4 wheel drive.

[@donaldburkhard7932]

For steering use gears from a small differential such as riding lawn mower?

[@davidallison669]

"Passenger side of the vehicle" 😆

[@Hitycooking]

kzbin.info/www/bejne/pp7IaHmApJJomZac4

[@devonfretwell3351]

@@Hitycooking I see you everywhere advertising your videos

[@devonfretwell3351]

@@Hitycooking but that go kart is cool

[@jaimebergeron3348]

Ikr 😂theres barely a drivers side lol

[@bsidb3919]

Looking good guys

[@TrulyUnfortunate]

You can make a floating chain tensioner. Take two pieces of flat bar of the appropriate length,drill a hole through one end of each and a slot on the other so you can adjust it. Put a couple of rollers on it and bam. It'll just ride on the chain,no need to anchor it at all.

[@thelawntractornut5448]

Hey love your videos guys keep up the good work almost to a million subscribers here we go

[@christophermusick546]

So I was thinking if that steering still doesn't work out. You could build brackets to raise the engine a bit. And run a better angle directly under the engine. Could even fabricate a fake blower or something to make it look like a hot rod power wheel for if it has ro come out the hood of the power wheel body lol Love this channel so much and this is one of my favorite builds of yall so far. Don't normally comment but I love that yall also have yalls own ground to tear up now. These mini builds are so fascinating to me lol

[@mattgwin2438]

At the high angle u-joint on the steering, it looks like you could use (2) 45 degree bevel gears instead of the u-joint. It would be a lot smoother.

[@Lysdexis]

All they would need is 2 bevel gears instead of the sprockets and chain. But that would make too much sense.

[@charlietheepicpenguin3665]

Nice video! Keep up the epic work!

[@samsgarage1716]

It’s looking great

[@calzonemoto4651]

You are spoiling us. I love it!

[@mrman2862]

looks like you are still going to have issues with the steering.

[@sweetkellymay]

I would have raised that steering chain up higher, so the steering wheel was horizontal.. No universal joints to bind up..

[@thebaconbrotato]

I don't use Facebook, but this Snakebook you mentioned has peaked my curiosity.

[@v_twin_villain]

Ike should never not have a beard. That thing is glorious.

[@grahamrooney247]

Great job guys👍

[@sunsweetsuitable593]

i like the longer videos!

[@kenjohnson5498]

If you put running boards on it you'll have a place for your feet

[@soniclab-cnc]

respirators ! get em on !

[@kristopherjay1628]

Hey have you guys ever tried painting rims with vaseline on the tires? You can just pressure wash the paint off. No need to tape off the tires.

[@Braydonbuilds]

Did you ever think about doing a rack and pinion to help with the steering, I think it would help all around

[@haroldkelley3635]

Like the channel. Question for John though. How is the truck coming along? I love those old steel body trucks

[@taurincochran3398]

So when does it go up against Grindhard,Rather be Welding, and Red Beard?

[@calebHG]

DUDE! Where did you get the OSHA Certified P100 t-shirt you used for spraying clear?

[@raybeaudry463]

Maann this channel just keeps getting better and better you guys rock what a great partnership 👏👌

[@rugbyguitargod]

Bearings at all of the rotating metal to metal parts of the steering shaft(s) would significantly reduce rotational friction and would likely make the steering significantly easier; even with the excessive u-joint angle. Just a thought. I love your guys’ videos btw!!!

[@lenhawkins3803]

Cut out the hood and put it on. It will look a lot better than leaving the inside edge of the front fenders and grill exposed. Extending the length a bit will help with comfort and drivability too. It does look good though. Nice job in cramming all that "stuff" in such a small package.

[@backyardrestorations]

I have a tillotson 212 with mechanical fuel injection, Stage 1. I’m going back and forth between a 26mm 28mm or flatslide 24mm what do you recommend?

[@dakotacrowley9511]

This thing is lookin sweet!

[@Miohunter444]

Lookin good guys"maybe you should lengthen it some and put a nice seat in it.

[@tanneraustro9438]

Question- is the stage 1 kit worth it for the power upgrade on a 212

[@memedogmemeaccount2163]

Hood scoop for the kart

[@Yrocsrelles]

Dang I've never been this early before

[@broo_shs]

early bird gets to worm

[@kevinolson5112]

Me neither.

[@broo_shs]

@@kevinolson5112 some day!!!! over to rainbow you can see This Earlier

[@Hitycooking]

kzbin.info/www/bejne/pp7IaHmApJJomZacrh

[@bullzeyez3236]

You need to stretch that frame by 6 inches bruh.

[@StupidEarthlings]

Agreed, the body is already split, just add some "middle sections".

[@markduran2448]

Solid black frame would look that much better! I don't get the bronze. I do however love that its 4wd and the new sprocket should make it a hill getter.

[@brianfisher7875]

yes it need the windshield and also a light bar. have you thought about a gas tank out of a Jerry can mounted to the rear?

[@freakotec]

Great job guys! This little Bronco definitely been one of my favorite builds thus far. Keep it up! Btw, I don't know if it's possible of not BUT, how cool would it be to poke and stroke a 212cc predator to 302cc for that true Bronco feel! Let's go!!

[@nybergsgarage]

If you want a true bronco feel, you have to build it to fall apart as you use it... 😂

[@freakotec]

@@nybergsgarage damn.. low blow. lol

[@nybergsgarage]

@@freakotec nah, just friendly joshing based upon brand name competition. Haha.

[@gradybrowning3976]

It will be fine!

[@FangOfTruth]

Another option is taking two ball type impact swivel sockets( if one doesn’t have enough angle)in place of the universal joints. Would be much smoother and maybe no binding.

[@chasnelson5753]

you guys need to get or build a lift . my back hurts just watching y'all 🤠

[@redorrick427]

i've said that for yrs. why are they working on the ground,when they can be standing up to do all these small projects

[@chrisp.816]

please make the rail ready for the summer!!!!

[@noduh736]

I bet ike was about to pop off when you hit him with the tape ball the bronco looks great