What injectors fit a 1uz non vvti? And quick look at VVti (1uz / 3uz) too.

[@mydogisripped7448]

According to various sources the RX8 uses a Denso 195500-4450 (550cc), and 195500-4460 (650cc). Does that sound about right? I'm fixing to find out if the 195500-4460 work or not...

[@lexomotorsports]

Right on dude.I have been learning alot on the uz engine from your videos

[@CartuneNZ]

Glad to help. Cheers Kelvin

[@angelokarantonis7509]

Love your channel. Watching from Sydney wishing I lived in NZ with its beauty and amazing people and culture.

[@CartuneNZ]

Thanks for watching!

[@joshcarey3737]

Happy New!! Keep at it Kelvin - great work and really appreciate you passing on your knowledge!

[@CartuneNZ]

Thanks Josh. Happy new year to you too. This is all about sharing the knowledge as we can acheive lots more by working together. Cheers Kelvin.

[@edwardolopez3368]

I've been bingeing all of your 1UZ videos, huge help. thanks a ton. let me know if you're open to accepting an apprentice

[@Lexusturbo]

Brilliant vid mate - revisiting various videos as I move to 3uz

[@CartuneNZ]

Im thinking the slight change in the exhaust flange angle might be just enough to be a pain, but maybe there is enough flexability in your setup. Cheers Kelvin

[@B-skidz]

"Yea nah that's not gonna fit" 😂 gotta love that kiwi accent 😂

[@CartuneNZ]

We talk English to new levels. Cheers Kelvin

[@Johnnyaspec]

Good info there, my 1st thought was to use RX8 yellows, but in the UK a second hand set of 4 will set you back about £100, obviously need double that. But for £220 I got a set of 8 new Bosch 550cc "GT500" injectors, only downside is it has a 14mm top seal and the body is 10mm shorter. So several hours of machining needed but for the price it was worth it.

[@CartuneNZ]

yes. I should do a video on fitting the 14mm style o-ring injectors to the UZ rails.

[@maadenengineering9101]

Great and useful informations...thanks

[@CartuneNZ]

Thanks for the compliment. Cheers Kelvin

[@V8TezzaBoss]

Quick question what injector can use to upgrade my 1uzfe vvti

[@AdrianGonzalez-mg2lu]

We want more vvti! Haha thanks man, great info!

[@CartuneNZ]

I have plenty of VVti and 3uz stuff coming. My videos are based around the work that comes in the door. Plenty of time for VVti stuff. Cheers Kelvin

[@scoobydoodrew4209]

forreal ! trying to swap my vvti 1uz in a cressida !!

[@travthecooldad5489]

If I wanna run a 3 port catch can n a 92 1uzfe motor where should I put the inlet, the outlet, and the 3rd port if I’m running a closed system?

[@travthecooldad5489]

I wanna go e85. I have a 92 1uzfe. Which injectors can I get? I can’t find anything that’s for these motors? You have a link?

[@witerobb42]

Can you do a video explaining how to bypass egr on stock ecu?

[@witerobb42]

I have a 95 ls400 I want to delete the egr on

[@CartuneNZ]

Already filmed and edited however I cheated and fitted a non egr ecu so no fitting of resistors to the ecu. Egr models are very uncommon over here.

[@CartuneNZ]

Will be released early next year as part of a ls400 refab.

[@witerobb42]

@@CartuneNZ will you be showing how to fit the resistor to the ecu?

[@CartuneNZ]

@@witerobb42 I am not as I swapped to a jdm ecu as the ECU was also stuffed.

[@DaveHiggoHiggins]

Great stuff Kel, really appreciate the insight. Question, theoretically, if first gen Soarer injectors are 250 cc, it it feasible to change them, and their computer, into a first gen LS400 for more fuel/spark = power? Would it be THAT easy to take the 180kw first gen LS400 up to say 200kw?

[@CartuneNZ]

Hello Higgo. It would be a shitload of work for very little gain. Swapping to a UCF20 ecu and loom might be more practical and give better results. I'm presently doing a job using later ECU on early engine. I've just finished a refab on an LS400 and thinking I might have to get one as a workshop test hack. I have some many ideas to try on it. Need more time to do it though. Cheers Kelvin

[@fmn716]

Great vid !!! Will vvti injectors fit 1uz non vvti ?

[@CartuneNZ]

No. VVti are air assisted. Check out this video for an explaination. kzbin.info/www/bejne/mZqqk5qGo56rjJI

[@travthecooldad5489]

Which E85 injectors for a 92 1uzfe fit bro?

[@CartuneNZ]

All the same info applies to sizings but ensure they are E85 suitable.

[@travthecooldad5489]

@@CartuneNZ I went with mk3 Supra E85 injectors to OEM intake and rails. Fittings like a glove

[@travthecooldad5489]

fits*

[@MrTurtle10433]

Where do you buy your new connectors from? I'm having trouble finding a place

[@CartuneNZ]

I buy them from the oem manufacturer who has minimum order levels of between 2500-12000. I can sell you some small amounts

[@MrTurtle10433]

@@CartuneNZ awesome. I'd like some

[@CartuneNZ]

Email [e-mail] with a list of the connectors you want and my PA will sort

[@erickvasquez001]

So I have a 97 1uz with a 91 ecu and harness running it. How can I improve my cold start since it seems I dont have a cold start injector? the computer cant keep it on in the extreme cold until it warms atleast a little bit. I have to manually hold it for a minute or so until it can hold itself alive. Advice appreciated!

[@CartuneNZ]

Ive got videos coming on swapping harness and ecu setups very soon. The best way is to match all the components so with yours you have gone from sequential injection backwards to grouped with cold start. I would be confirming it is set up correctly as per this video kzbin.info/www/bejne/sHqqo6Gqf76jaKc Then ensure the IAC is healthy. Also the early ecu had smaller injectors so I would confirm the injectors match the ECU. Making sure all the parts are correct is the best thing to do and ensuring all the other normal stuff like there are no air leaks , ignition is in good condition etc.

[@augustegarcia6254]

hello, do you know if you can run the 1UZ non vvti fuel rails onto the 1UZ vvti manifold? do the mounting bolts line up? I'm trying to upgrade to billet fuel rails and I want to see if they will fit on my 1UZ vvti because they are technically made for 1UZ non vvti. thank you for your time!

[@CartuneNZ]

Easy answer, they dont interchange between non vvti and vvti. Cheers

[@pondy-89]

So seeing as the factory rx8 fuel injectors fit, does this mean you can use aftermarket rx8 injectors?

[@CartuneNZ]

Well if aftermarket RX8 injectors fit into a RX8 then chances are they are going to fit into a 1uz don't you think? Yes all interchangeable fine.

[@josepayan3986]

So technically 1uz injectors won’t go well on a 3uz cause of the Ecu