CARVE HARDER // Advanced Snowboarding Technique

[@samiulalam1509]

I was just working on my carving the other day and only now realise that I do exactly that same mistake as you point out in the beginning trying to touch the snow and often lose balance on heel side carves. Loving the grab cues that will guide me to stack the weight on the right place next time. Can't wait to try it out! Brilliant as always Malcolm.

[@malcolmmoore]

Awesome, have fun!

[@8berkes]

Your videos have helped my snowboarding immensely, thank you!

[@malcolmmoore]

Thank you so much!!! Happy to hear the videos are helping! Enjoy 🙌😊🙏

[@seatownlife2000kj]

Hey Malcolm, The graphic that you've added in your videos showing where and when to apply pressure to the board is super helpful. That's why I recommend new riders to watch your videos. 👍🏽

[@malcolmmoore]

Thanks so much!!!

[@vincentcadena9004]

Saw you riding last Saturday when I was on a lift. I've been working on some of the techniques you explain since last winter. Made lots of improvements on driving the board and not skidding. Great vids Malcolm.

[@malcolmmoore]

Thanks so much!! Only just seen this, hope you had a great holiday!!

[@JDenim88]

I love how you’re sharing other KZbinrs. I love his channel. Between your channel and his my knowledge gap is closing faster than I ever expected.

[@malcolmmoore]

That is awesome!

[@seanparker571]

Just tried this and it is a game changer!!! I was always bringing my front arm across onto the toeside, and leaning for angle. That works but this angulation technique is so much more direct, just ‘bites’ in. Thank you Malcolm

[@Justaride-Snowboard-Channel]

Nice one, Malcolm!! I love how you explained de-cambering the board as you tilt it higher on edge!! And I love the animation that shows the pressure moving along the edge!! This is good stuff! Looking more dynamic there in your posi posi carving setup! So cool that you're trying it out. Thank you for mentioning my video. That's very kind of you!! I might be in Europe late January! We'll do a clip together, that'll be great! :-)

[@malcolmmoore]

That was with riser pads on at the end too, boot drag is such an issue for me with my larger feet! Stay in touch, would be great to make some turns with you!

[@Boardrider3x1]

@@malcolmmoore what kind of riser pads do you use/would you suggest? I have size 12 boots and a 26.7 midwidth, but still it's such an iasue for me...any riser pads suggestions that work with the Cartel X or does that not matter which ones? Would love to get a bit higher angles to be able to carve a bit deeper

[@malcolmmoore]

@@Boardrider3x1 I found some old Palmer riser pads on eBay, I'm not sure I fully trust the mounting system though!

[@Boardrider3x1]

@@malcolmmoore alright, thanks. I couldn't find any so I thought I ask. Cool orange outfit btw, like the Japanese Orangeman ;) Merry Xmas and happy shredding

[@Justaride-Snowboard-Channel]

@@malcolmmoore we gotta get you on a Cheater 170W.... 275 waist.... Board rides like a dream! First Stranda I ever strapped into. Five turns in I was like "Oh shit... THIS is carving!" A new world with a new type of fun. The confidence boost an experienced rider gets out of 143cm of effective edge and the damping of the ash core is wild! Turns you into Superman of cord.

[@ruipinto1986]

I had some Ryan Knapton vibes watching these images! Awesome. The graphic that you've added is also very helpful as usual.

[@malcolmmoore]

Awesome any comparison to Ryan is fine by me 😊😊

[@fred514]

Love the shout out and acknowledgment to Lars! Great to see community thriving! Keep it up! Can’t wait to see your take and evolution into posi-posi! 😜

[@malcolmmoore]

Absolutely!

[@Lalgaru]

Malcolm is the best snowboard instructor on KZbin. Bar none!

[@malcolmmoore]

Thanks 😊🫶✌️

[@thanhtungbui7823]

Nice video! It’s exactly what I need right now. It’s easy to ride for years without realizing the power of these tips. Thank you so much!

[@malcolmmoore]

No probs 😊✌️

[@Pilot-ATC]

The most clear, useful and detailed video about carving, thank you!❤

[@malcolmmoore]

Thanks so much 😊✌️

[@vashusan1984]

Malcom, your videos are the best. The way you break these concepts down is outstanding.

[@malcolmmoore]

Thank you so much!!!

[@JukkaliMx]

At 6:55, love that you left that slide in there, haha. Happens to everyone. I've only managed to "bounce" out of a carve a few times in my life so far, where I actually popped off the ground at the end of a turn, but it's such a fun feeling, I'm gonna keep trying to make it work reliably for me. Personally, I ride with positive angles because I find it a lot more comfortable; and I think I'm so used to it that even riding in my normal goofy stance, but with a negative angle on the back foot, makes my foot hurt after a few runs. Probably gonna have to correct that, if I want more practice in riding switch 😆

[@78danhughes]

The "bounce" you've experienced happens when you do down unweighted turns, whether carving or doing advanced turns, say on uneven terrain. It allows for the high board angle during the apex of the turn when your legs are extended, creating a ton of power to pop out of the turn/carve as you flex and unweight into the next turn. Easier said than done though! When you nail it, it's like a eureka moment.

[@lulunomu]

⁠@@78danhughesi think you're thinking of up unweighted turns but yes. jumping from carve to carve is like taking an up unweighted turn to the max and when you get it it's so fun

[@SlingShotKid007]

@@lulunomu I believe it's down unweighted

[@TheDige]

Thank you thank you thank you for not editing out that bit where you sat down. Love the videos, but was feeling very inadequate watching your seemingly endless perfection haha

[@malcolmmoore]

Haha 😂 got to show reality

[@darrenpotter2553]

Good to hear you talk of posi angles, I ride Posi / Posi due to leg injuries and no desire to ride park particularly, and I love the control

[@BBQKana]

The indy-melon tip was a game changer for me. Tried it today and it made a clear difference for getting the board on the edge. Great video!

[@malcolmmoore]

Awesome 😊🏂✌️

[@rmtomasin]

Really love these advanced videos Malcolm!!

[@malcolmmoore]

Thanks 😊😊

[@lauhanwai]

Hi Malcom, those our beautiful carves~ especially given +15 / -12 I also started fiddling with my stance and moved to +21 / -6 and found carving and speed more natural, as I was able to bend and manage my front to aft weight more nimbly. Love your vids Cheers

[@teacherguy5084]

Something a clinician showed me over 20 years ago has helped my heelside carving over the years with a weak duck stance (I ride a lot of switch while teaching to give students a correct visual in demos). If you stay more aligned to the board (shoulders over the feet) on heelside carves, and put your back hand near/behind your butt as if you were about to put it in your back pocket, this keeps your arm's weight over(inside relative to the turn) the back foot, leading to less of a tendency to wash out the back end. Compared to opening your shoulders, which brings your back shoulder more toward the toe edge and must be counteracted by bringing your front shoulder closer to the snow on the inside of the turn, this allows a more aligned stance so maintains easier flexion and extension to deal with surface irregularities, key on heelside due to the lack of significant ankle joint use. The only downside of this is that you have to be sure of what's around you, as you don't have as much view to the heelside, unless your neck has the flexibility of an owl's.

[@martenih]

I just watched Lars video yesterday and now you post this. Can't wait to hit the slopes during Christmas!

[@malcolmmoore]

Yeah best Christmas present 😊

[@rhn4710]

Malcolm, you have no idea how much this video helps me. I recall doing fore-aft movements across the turns because I felt much more in control of my edges while shifting the weight back during the turns, because I mimick a slight popat the end of a curve to unload the board just before the edge change because I try to avoid making the board stay flat as much as possible. I do that mostly because I'm afraid of how the board might behave when catching more speed so I end up doing something that resembles dolphin turns except I never leave the ground because my fat ass keeps me grounded lmao. Also my board is rather wide and doing so gives me room to shift my weight inside the new curve during the edge change. Perhaps I should find a stiffer board but I'm not sure if it's wise to ride something different while still learning. I would have loved something like the Dada you had, but I ended up picking a twinpig because, beside being cheaper at the time, I thought it was punishing enough to make me pick good habits from the get go and work on technique and posture. Speaking of which, I probably should have somebody film me but I might be bending forward a lot while trying to touch the snow, and I might have realized that when I lost control of my board it was because my center of mass, while being bent instead of laying low, was much more eccentric than it should have for the speed I was going at. I'm looking forward to my next trip to try and correct my mistakes, thanks as always for your videos, they are always tremendously helpful.

[@edmondlecampion7693]

Best carving tutorial ever. Thx Malcom.

[@malcolmmoore]

Thanks you 🙏😊

[@郑心然]

The best skiing series tutorial on the internet♥Can you explain the reason why the blade is lost after 6:56 seconds, because I often do this too

[@malcolmmoore]

That was heel drag, I have big feet US12, and it was simply the heels hanging over the edge of the board and digging into the snow. If you don't have big feet it won't be this issue!

[@郑心然]

I use a Donek snowboard with a waist of 27cm and shoes US8.5. The anchor is step on. My feet are not too big, but maybe due to the protruding ankle cup on the step on and Ryan Knapton's curving style, I still often face the problem of the back edge being out of bounds. Thank you Malcolm for explaining, which has convinced me of the same problem@@malcolmmoore

[@郑心然]

I use a Donek snowboard with a waist of 27cm and shoes US8.5. The anchor is a StepOn. My feet are not too big, but maybe due to the protruding ankle cup on the StepOn and Ryan Knapton's curving style, I still often face the problem of the back edge being out of bounds. Thank you Malcolm for explaining, which has convinced me of the same problem@@malcolmmoore

[@gtj1]

Awesome tips!! I've always wanted to be able to ride like this and now I have no excuse.

[@malcolmmoore]

Thanks 🙏😊

[@DaveHollanderEE]

That fore/aft sidecut pressure graphic is nice. I'm a fan of VSR to initiate on a tighter radius in the front, and exit with a larger radius towards the tail. Particularly on steeps.

[@DukeLeeWeed]

I just wanted to say thank you for your videos! I started snowboarding three years ago and find your videos very informative and helpful. I also like the mix of carving input and beginner freestyle input on your channel. The linked video at the end is also awesome - thanks for the channel recommendation! Greetings from Germany :)

[@malcolmmoore]

Thanks so much 😊✌️

[@henrynickless6437]

At last someone that actually knows how to turn a snowboard. Ever tried a hard boat alpine board? Takes carving to a new level.

[@RobertoVillaLobby]

Been carving on my Freecarver 9000 lately using this technique and it's so addictive. Feels like flying. I've ordered a Biru for carving steep terrain where that big turning radius of my Freecarver isn't very nice. Looking forward to feel the 2m in sidecut difference 🙂

[@JfromHouston]

Rode posi-posi for first time ever today. Im hooked! Crazy how comfortable it was from turn 1

[@malcolmmoore]

I'll be doing some more this season for sure!

[@bikeandboard]

looking good on those posi/posi angles!🔥

[@malcolmmoore]

Thank you 🙏😊😊

[@wooltron1]

​@@malcolmmooreWhat angles are you riding?

[@malcolmmoore]

@@wooltron1 you should watch the end of the video where I say all my angles for different setups

[@youjib]

stranda biru looks good is it a flex 7?

[@wigg3k]

Love your videos! What size of the Biru do you ride?

[@rideordietheyretring2tranx382]

@7:07 i'd suggest adding the importance of the 'building of torsional-flex-preload' ( torsionally twist, as you call it )that stores energy from the tip of the (rear) edges while weighted to the rear in the end of a turn, as a process to setup an edge change and a weight shifting forward, to help 'flip' you to the transition to the opposite (nose) edge it is to say the harder you load up the back foot while on edge, the more pop comes from the tail releasing its edge during an edge change and you can use that Fyi, if boot drag is an issue then you are limited, period.

[@vickyhylee]

U taught me the indy grab trick couple of years ago, now working on my toe side one using this front arm trick (i only SB a few days a year... 😢). Helped a great deal as it helped me to understand how upper body movement could help to increase or decrease the edge angle. (Cos i was like, stacked position, dont twist upper body, but then in this situation in order to press my back shin down harder, my hip and by extension upper body will twist a bit). Great tips, as always, v useful and effective, thanks 👍🏼

[@malcolmmoore]

Brilliant glad they help 🙌🤗

[@somebodyyyyy806]

Amazing video, Malcolm! Very good tips in one video. Using your back foot in the middle to the end of the turn is crucial because otherwise you overload the front foot, which results in a skidded turn. Other tips are very good too. Like that you need to direct your hips towards the slope in the toe-side turn, not your arms. Thanks a lot!

[@malcolmmoore]

Thanks so much 🙏🙏

[@petersaro6931]

Hi Malcom, I‘ve been watching your videos on and off for years now. They really helped me to improve my snowboarding technique a lot. Thank you for your work so much. Also I do find that only quite few „youtube instructors“ are able to explain the techniques so precisely and simply as you do! Anyways, I am still struggling to carve at higher speeds on my toe edge. I do wash out, even while applying pressure on my back foot. At the same speed I don’t have these problems on my heel edge. I’am pretty helpless and don’t know how to solve that problem. I also seeked help from an instructor which told me to apply more pressure on my front foot. That helped a little but I still wash out… Maybe you have an idea? Appreciate you time and work, keep up the good work!!! Regards Pete

[@malcolmmoore]

Hey Pete, many thanks for the nice comment and glad you're enjoying the video. Ultimately without seeing you ride it is hard to diagnose what is causing you to wash out, and therefore my best tips are really just the ones in this video! It might be worth carving at slower speeds, making sure you are really leaving a pencil thin line through the entire turn, and then as you increase speed or gradient of slope, see what part of the turn washes out first. After the edge change, or closer to the end of the turn, and this will help you understand what is going on.

[@petersaro6931]

@@malcolmmoore Hey Malcolm, Thank you for your quick reply. I did watch the video over and over again. Next day after your answer I went out to give it another go. Finally I was able to improve that toe side turn by GRADUALLY applying pressure. Somehow I can do it on the heelside without being conscious about it. But on the toe side I really have to focus hard 🙈. Thank you again for your Vids!!! With best regards, Pete

[@mtcsypkens]

I noticed I had quite a hard time not starting to bend over on the frontside and started to really push my knees towards the snow. Seems to also work to get the same posture you mention with your front arm. Love blue and mellow red pistes, because it gives you the right speed and when really pushing the board, you get a great rebound and go faster still!

[@sashashkodich9505]

Very good explanation of changing the balance from front to back foot! Could you tell what was the piste you were filming at Zermatt?

[@Daz5Daz]

Posi posi for life! Come join us Malcolm. We're a nice bunch.

[@malcolmmoore]

Haha I could be swayed

[@kitjunya]

Thanks for the link to posi posi video at the end. That really helped me understand it.

[@malcolmmoore]

No probs 😊✌️

[@OutsideSometimes]

The rebound on my new board is fun, but also tricky. Tossed me off balance today and I slammed pretty good. Spicy 🎉

[@malcolmmoore]

Oof 😣 take it easy

[@derrickgrigg]

You are either carving hard or hardly carving. Keep up the great videos!

[@malcolmmoore]

Thanks so much 😊😊😊

[@DenisEneotescu]

Double posy changed my snowboarding life, please try it out, go +9 +24 or even more exaggerated especially in the beginning to see how your whole body adapts, then you can tweak everything to however you like it, but simply going super posy posy will teach you a new style

[@Snowmoparaboarder]

Hi Malcolm, I'm going to challenge you to rethink your technique here. Having your shoulders more open at the beginning of the heel side turn helps create twist in the board over the lead foot to initiate the turn. That's good. Holding that body position has an unwanted effect at the finish of the heel side turn. Just like you want the edge angle steeper over the lead foot and more pressure over the lead foot to enter a turn, you want the opposite to finish the turn. You want more pressure and more edge angle over the rear foot by twisting the board in the opposite direction than holding your shoulders open on the heel side turn would allow. That's why you're trying to tuck your back knee to combat those forces which also moves your center of mass away from the rear foot and reduces range of motion. You also have a tendency to extend through the finish of the turn when the forces are building which would cause you to chatter out on steeper terrain or if trying to complete your turns across the fall line on harder snow. Think about torsional steering with slightly more edge angle and the center of mass slightly towards the lead foot to initiate turns on both edges. Your center of mass should be between your feet in the middle of the turn with no torsional twist. And then to finish the turn, you should have more edge angle over the rear foot and more pressure over the rear foot by having your center of mass move slightly towards the rear foot to complete turns and then there is a diagonal movement from the rear foot to the lead foot at transition to initiate the next turn. Try to make your extension movements more lateral and less vertical to maintain even pressure on the edge and use the rebound in that way rather than losing contact with the snow. Try completing some dynamic carved turns on steeper terrain while controlling your speed through turn shape without skidding by completing the turns across the fall line and don't allow the rear of the board to chatter out. If you can do this while tucking your knee and with dramatic vertical rises of the center of mass, I will be very surprised. A mentor once told me, I can't have an opinion until I stop tucking my knee. It took me a long time but I have finally unlocked the true secrets of carving. Would love to ride with you sometime. I think I could change your whole understanding of snowboarding. Think about a quiet and disciplined upper body with a stable center of mass and an active lower body that steers more than the upper body. You oftentimes show a dramatic upper body initiation to your turns rather than letting the movements happen from the feet up. Just a suggestion bro. I hope you have a great season.

[@tayloranderson8386]

You nailed it. The main thing I see is the opposite timing that one would desire if their goal is to maintain consistent pressure on the snowboard throughout the turn. Unfortunately, nobody talks about being most retracted at edge change on KZbin, so there are no videos that I can tag for reference. Maybe somebody should change that? 😂 And yes, the stance is massively effecting the back knee tuck. It’s also preventing the natural squat position required to get low at edge change in addition to blocking range of motion aft to finish the turn. Ankles and toes and very powerful, and work best when in alignment with the knee and hip; which is impossible with a stance that isn’t mirrored. I too would invite Malcolm to change his perspective and movement patterns. Down-unweighting is phenomenal and should be talked about more online. It’s just so soft and flowy and everyone should try it. ❤

[@jaimepardo]

I thought you were supposed to tuck the back knee when carving with posi/posi angles and feet steering was more when riding with duck angles to twist the board torsionally? Carving boards like Malcom’s Stranda tend to be torsionally very stiff to keep them super damp and increase edge hold when executing hard fast carves. So foot steering with torsional twist isn’t optimal in this scenario. Double posi angles enables a body position that can maximise hip movement over the board & fowards/backwards movement necessary to steer torsionally stiff carving boards... check out the Just a Ride channel that explains the difference in techniques when carving posi/posi to duck feet (feet steering quiet upper body) & why tucking the back knee when carving in posi/posi is desirable. Malcom name checks Lars at Justaride at the end of his video so that’s possibly why he’s experimenting with tucking the back knee. Also the Korua shapes guys have some great carving videos on their channel in their yearning for turning series- they’re all tucking the back knee & rocking posi/posi for carving - they don’t have a super quiet upper body and they come from a pro race background. I could of course have completely misunderstood what you were saying though so apologies in advance if I’ve misunderstood your point 😅😂

[@Snowmoparaboarder]

He is riding a duck stance. Not positive, positive angles. The movement patterns on race boards with posi posi angles is much different. If you look closely, you can see he twists the board giving much more edge angle at the finish of his toe side turns and has much more pressure over the rear foot. He does the exact opposite at the finish of his heel side turns because he is tucking his knee and has an open body position. Because of this, he can achieve a much more effective finish to his toe side than his heel side. This is one of the most common movement patterns and obstacles to a more effective heel side finish. Sometimes called the "soft rear foot". A rider should allow the lower body to rotate more than the upper body while shifting the center of mass aft without tucking the knee during the completion phase of the heel side turn to achieve more edge angle and pressure over the rear foot to finish the turn. Vertical changes of the center of mass infer a lack of consistent edge pressure. Extending late through the finish of the heel side turn increases pressure and causes chattering and makes the toe side initiation late.

[@mikeoclimberMTB]

Dolphin turns popping out of each carve are a good way to practice this, noticed the same coming out of the heelsides in this video.

[@xriz8409]

Food for thought!! Thank you. Any vid with a seen explanation would be serious gold…i dont want to go pos / pos but would like to get a stranda for fun carving…;o

[@Boardrider3x1]

Excellent video, once more, and just what I have been waiting for 😃 as I do the 6:57 move too often 🙄 did you get caught with your heelcup? Happens to me a lot (with size12 boots, usually in softer snow). Thank you so much for sharing your knowledge and expertise and spreading the joy & stoke! Merry Christmas and have a great season!! 🤙

[@joshuasills]

Great video and nice to see you link to Lars at the end. He has the best english language videos on posi/posi carving on YT imo

[@malcolmmoore]

Yeah I agree 😊😊

[@davidchau5077]

Will the pressure you put on your front foot control the arc of the turn? Like if I wanted a a big wide turn, I'd put less pressue there, and more pressure if I wanted a very short turn?

[@CaptPaii]

Well done Malcolm 🫡

[@malcolmmoore]

Thanks 😊😊

[@CaptPaii]

@@malcolmmoore I’m instructor as well. From Thailand your big fan.

[@neilbower123]

Off to Zermatt myself next week, so will deffo give these a go, cheers

[@malcolmmoore]

Enjoy!! Love Zermatt 😍

[@grimmriffer]

RE angles, I started with mild positive on the rear foot, and if I could guarantee I'd only ever be carving I'd stick with that. But in the real world, on a day out you hit all sorts of conditions, so I generally settled on running the back foot square!

[@malcolmmoore]

I've actually just made a video on posi posi angles, coming out next week

[@top77i001]

Hi Malcom, great content! Why did you washed out on min 6:57, it happens to me often (I don’t think it’s from booting out ).

[@alfredramirez_sunpsm]

Hi Molcom! Thanks for your Videos I have a question. For an open ride, which is the best angle and position for the binding. I'm a goofy rider. Thanks for all. I hope you can answer

[@malcolmmoore]

Here I'm riding +18 -9, theres no best position, but purely for carving then a more positive stance will help you get lower, that said I'm not sold on posi posi for all mountain riding. But you can experiment!

[@pan_kos]

Great explanation as always!!! Learned down unweighted turns last year, thanks to you!!!! If it's not too much trouble, can you make a video explaining the snowboard levels and how to understand in which level we are? 1000 Thanks again!!!! You are awesome!!

[@brianp9268]

Trying different gear and knowing what you want out of your riding will always be best.

[@malcolmmoore]

Thanks so much!! And yeah I'll put that on my list 😊🙌✌️

[@Evan_prits]

If you ride goofy, replace the word youtube with the word mirrorthevideo in the address bar, It made a hell of a difference to me Malcolm delivering as always, Cheers

[@NickBall-ns4bg]

Hi Malcolm, great instructional videos. Currently in Borovets. Conditions sunny , 3cm of snow on 23 dec 2023, but pistes fairly hard and icey. Trying to carve better but struggling. Had my board serviced, button nitro , new bindings but still struggling as pistes fairly steep. I know conditions tough but any advice on two points. 1. Stance setup to help. I have wanged up the back plate on binding to improve angle to make back turns more positive. 2. When on a flattish run , even on icey corduroy I keep nearly catching an edge. Thanks again Nick Ball, Liverpool UK

[@malcolmmoore]

Ice sucks and is never great for carving as you can't trust your edges. The second drill in this video will help you with riding mellow slopes and in turn will help you practice your edge change for carving too. kzbin.info/www/bejne/nWaWmYatadRrmsksi=aV40rcHixx3q6mok As for stance setup etc, you can move closer to those positive angles, but again, that won't help with ice, it'll only help you if the conditions are already grippy! Very icy here too right now...

[@NickBall-ns4bg]

Hi Malcom, Not sure if this will help anyone but I had my button cartels binging me wanged up to 7 to help increase heel side carve. But this pushed both feet towards toe side, hence my stance was biased towards toe side. So I backed back he’ll plate off to zero and this improved feel but still struggling to be honest

[@Iosonocaste]

Subscribed. Amazing video. What happen if the pist is nit perfect? Still easy to carve or will be impossible?

[@malcolmmoore]

It's definitely easier to carve on a groomed piste!!

[@JohnMasco]

I watched Lars' video a few weeks ago before finding this one and yours covers the subject of carving better in my opinion. I've been riding posiposi for years now and switched to hard boots last season. I still need to work on my heel side carves and will use some of your strategy to see if it clicks. One thing not covered is the Sidecut radius of the snowboard, most boards are between 6 and 8m and I would venture to guess the one in your video is between 8 and 10m. A bigger radius facilitates those longer drawn out carves. Good stuff, thanks

[@anthonydubeau9313]

Actually the board he uses in the videa has a 7,1 to 6,9 meter sidecut radius

[@Rancor39]

Malcom thanks for a great video. I use the same binding angles to you for all mountain and park. I’m not real familiar with the nidecker supermatics but do you have forward lean adjustment on those? And what forward lean do you use? Thanks

[@malcolmmoore]

I have it on 1 if that helps 😊😊😊 thanks for the support

[@Rancor39]

Thank you

[@rcooper09]

Great video! Would love to see you riding more posi posi in future videos.

[@iamnotgarfield7632]

Like your videos Malcolm! Could you make a video to explain the 'the board performance' and how to maximize it in complex terrain, like free runs?

[@hoangdao9699]

Thank you. Now I understand the issue; Someone told me that I need to put pressure to back feet as I were leaning forward.

[@jerryb63]

Another great vid on my favourite subject,and referencing open and posi/posi stances. Kudos for linking to @Justaride too. 👍

[@malcolmmoore]

Yeah my favourite subject too!!

[@matthewallen4366]

Another great Vid 🙌🙌 Taken on all of your advise over the last couple of years and all has worked out well except i have been experiencing lots of back leg knee pain and swelling. I,m hoping this is just down to me trying to still ride with a duck stance set up in this more open carving body position. Im hoping to experiment with a more posi posi stance at my next opportunity to see if this remedys the issue. Cant wait to see a Mal and Lars Colab 😂

[@skamatters880]

Amazing breakdown Malc, helps a whole bunch, thanks, thoughts on the Biru ?

[@malcolmmoore]

I'm a big fan 😊😊😊

[@Rancor39]

Are you riding the 157 or 154? Thanks, nice video apologies if you answered this before I looked but couldn’t find info

[@mikizhang7758]

Excellent content as usual!!

[@malcolmmoore]

Thanks!

[@UniQue1992]

Hey Malcolm, what binding stance do you use? :)

[@davidspear6682]

The link you provided on posi-posi stance was excellent/

[@malcolmmoore]

Yeah he's great 👍

[@josesnowsneves5132]

Very nice. As a surfer I really like to push my carving you have here some really nice tip. You should consider an on-line course to practice some of the turns at home ;)

[@malcolmmoore]

Thanks so much!!!

[@PKSN14rasmus]

You always time the videos perfectly for when they're needed! I quick question about posture/body position. Should this more open approach be ones standard on the slopes, or should the "shoulders stacked over board" kind of position be preffered in most situations still? What about in icy / steep terrain, where it is difficult to achieve grip? And thank you so much for all of the free resources you put out! I am contribute a lot of my progress last year to your teaching, and I can't wait to get going this year :) Best regards

[@StickyManMaxxx]

are there any benefits to carving like this in general? i always thought style wise it looks weird as

[@SlingShotKid007]

What happened at 6:55? Heel drag?

[@Batwing2465]

Love it!! Thanks Malcolm

[@malcolmmoore]

Thanks 🙏😊

[@RammSec]

Nice video! BTW what's the brand of the orange color suite at the end of the video! love the color! any link for it?

[@malcolmmoore]

Rome, it's an older one that I used for a resort photo shoot I did, pretty bright, looks good in adverts!

[@kobrakatt]

Whats up with that UFO at 2:29 ??

[@nouseforaname5378]

That’s what I just asked. Came here from reddit

[@malcolmmoore]

👽

[@SlingShotKid007]

Great video as always Malcom! What are you using to mount the insta 360 to your board at the end?

[@bobsy852]

Is it possible to carve like this on a board which is slightly too short for my bodyweight?

[@Scwoopdy]

I loved this video. Do you ever ride switch? So much fun snowboarding.

[@malcolmmoore]

Yeah I do, but not as hard, more when I'm cruising around jibbing!

[@BD-ru1ij]

While on the frontside carve, do you try to push in with your toes or is it your shin that’s doing all the work? For me it’s mostly the shin pressing against the boot/binding but that sometimes despite 8/10 boots Leads to my boot flexing more than I want. Is a stiffer boot the solution or should I use some other techniques?

[@malcolmmoore]

Honestly this is a question I've asked alot of other riders and instructors and had mixed responses. For me I think you really need to mostly feel your weight in your shins, however you are obviously still standing on the balls of your feet as well, but the problem with pushing down into your toes is that you can end up opening up your ankle joint when we are in fact trying to close it. If your boots aren't very stiff this can however lead to, like you say, flexing too much. I've had the same issue to be honest, and stiff boots always get soft pretty quick, so I have found myself not flexing to my maximum, and using pressure on the balls of my feet more so than thought my shins. I think in an ideal world the boots would have enough response that they don't collapse under your weight! Sorry for the not very clear answer!

[@dootdoot1867]

When I really started to explore full power squating on edge to dig the deepest trench I could, I would try to power out. Thinking at extension I would get more power. Now with a few seasons on.. I find i get way more power and control progressively squatting deeper through turn initiation and peak arc, at that point you then have a mariad of options to flow into.

[@malcolmmoore]

Well said

[@AzNwacko]

Big fan and supporter since

[@malcolmmoore]

Big up, thanks for all the love, comments and support since the early days!

[@Afewmoments20]

Very nice tutorials Malcolm. In Tyrol, this has been a season with lots of heavy, slushy snow. Any thoughts on boarding those conditions ? Thanks & keep it up !

[@malcolmmoore]

kzbin.info/www/bejne/hnOYqYNmaJiapqMsi=xuxItLFmVeDSPjnI Here you go!

[@great_lakes_ryan]

Dang bro! No offense but your riding looks so much better! Really impressed. Thank you for sharing this knowledge!

[@malcolmmoore]

Thanks ☺️☺️

[@GiacintoMarcellino]

How is the stranda Biru for carving? Does that magne traction work well on icy conditions? I'm considering this board and the gremlin gnu. Any inputs?

[@malcolmmoore]

I haven't tried the gremblin but the Biru is my go to board for carving ..

[@GiacintoMarcellino]

Thanks for the answer man! Can I ask you if those "power bumps" are working well? Are they comparable to the magne traction? I'm looking for performance on icy conditions. Thanks again!

[@ls2011schorsch]

interesting video as always ! With the help of your free videos on youtube i managed to ride the snowboard pretty good 1 1/2 years. Thats absolutly awesome. You mentioned that you do private lessons which you advertise on a platform/app. Which platform/app is it ?

[@malcolmmoore]

I used to be on skibro but now I'm independant, my website is in the description of the videos 😊✌️

[@snaponholic4146]

Excellent video! Thank you so much. Can you share your setting and equipment information? I would appreciate it.

[@tksound9510]

Hey Malcolm, love your videos. I'm looking to get the Biru for a fun carver for myself. For someone 6'2 210lbs (~1.8 meters, 100 kg) would you recommend the 157 or 154? Cheers

[@malcolmmoore]

157

[@蔣承達-q2z]

What boots do you wear? I find my 32 tm2 with a 7 flex to be too soft for carving after breaking them in - my big toe gets strained so much it wants to fall off. And the boa system isn’t helping, the top goes loose after every hard charge or carve. (I ride +18 -9 as well 😃) Great video!

[@malcolmmoore]

Nidecker Kitas, they get pretty soft after a while too, like all boots!

[@Knigh7z]

6:55 any tips for avoiding this slide out? Toe side carving for me is great but I often slip out on heel side.

[@ollis1270]

Is it always as empty in Switzerland? I've been to Austria and Germany a couple of times and the runs arebso full that I don't feel it's safe for me to practise since I am not that good

[@malcolmmoore]

This is early season, during the week it was really quiet but busy at the weekends!

[@timjanisch9918]

Class video, Malcolm, thanks! Really nicely explained and some great stuff to work on. And my Biru is arriving tomorrow 🏂

[@malcolmmoore]

Great choice enjoy!!!!

[@Loggzy1]

Love the look of that Stranda Biru board. Could an intermediate level rider handle it?

[@malcolmmoore]

Compared to my park board it feels pretty stiff, but it's not really compared to some boards, so I think it's pretty approachable 👌

[@CarlyBarnesHere]

Thanks for making these videos and making learning to snowboard accessible to people who can't afford lessons. You are a highly skilled explainer and sharing that with everyone it's so rad 🥲

[@malcolmmoore]

Thank you so much!! Appreciate the kind words 😊🙏✌️

[@user-mq3ov1lj5s]

all I needed!! thank you a LOT!

[@malcolmmoore]

You're welcome!!

[@tobiasmalm2723]

Very nice video Malcolm! I'm a lightweight, 62 kg, with size 42 EU boots. Fairly good rider. I have a very soft true twin 152 cm board (Lib tech skatebanana) and a stiff directional 152 cm board (Tur Buteo), that I got for this season. Too the next season I'm looking for a board between those too, and the Stranda Biru caught my eye. To my question, do you think the Biru 154 cm is too large for me? Should I wait for the release of the shorter variant? I'm do not want a stiff board, as I have my Buteo for that, I want something in between my current boards.

[@malcolmmoore]

I think he's bringing out a shorter one soon, which might be a better option 👍

[@bosco2814]

Is that possible to achieve the aggressive heel side crave on a park stance, such as +6-6?

[@malcolmmoore]

I'm sure it's possible, pretty sure Ryan knapton rides a duck stance and carves pretty well!

[@xviigg]

I have a size 12 boot and am really struggling with booting out, any advice? Or do I just buy a donek or warpig

[@malcolmmoore]

Yeah you need to look for wider boards, that lead me to the board I'm on in this video, the Stranda Biru 👍

[@johnroden3431]

How much difference does it make in an all mountain board vs a flexible park board? I've always rode a rigid all mountain board, but have wanted to get a freestyle board for more flex.

[@xSTNo]

Awesome video Malcom, I was struggling to understand what people mean when they say camber profile allows you to load the board through the turn, and you have just explained it clearly. Another thing I am struggling to understand, and you touched on it a little bit in this video, is the role of the front and back foot which ultimately influence if you ride regular or goofy. I am a right footed person and usually it should mean I should ride regular, but when I tried both styles I found riding goofy was much more comfortable for me. The issue is I feel that I am missing out on something when I have my dominant foot on the front of the board, unlike most people where they have it at the back (i think). Should I force myself to ride regular as it might enhance my riding on the long run?

[@JukkaliMx]

As a left-handed, right foot dominant person, who rides goofy, I say do whatever you feel most comfortable in. In snowboarding, there's the theory of what works, and then there's what works for an individual rider. If having your right foot in front is what works best for you, then you're goofy. Don't overthink it.

[@iamkeir]

Re @9:35, would love a video of your positive stance experiments and experiences. I tried last season with +/+ and keen for intel!