Case Knives: THREE THINGS YOU MUST DO WHEN YOU GET A NEW CASE KNIFE!

[@mikep.9371]

Quick, simple, in-expensive, practical, common sense "take care of you new Case" video. Well presented Erica.

[@ericasedc]

Love you Mike❤!

[@TheKnifeRaven]

Salutations, Erica. I very much appreciated this video, extremely helpful for a newer knife collector and a good reminder for a veteran. I just got a mini Copperlock the other day and I must say, I almost want another one, already! 😅 Cheers!

[@ericasedc]

Cheers!!!!

[@jerseyknifeguy6382]

Hey Erica absolutely for sure it’s a complete must you clean and lubricant and sharpen your case knives when you get them I can’t tell you how many videos I did showing how to clean and sharpen case knives….. I show people the paper towels and the blades feel like they were done on a curb!!!!! Fantastic video a lot of first timers have no clue what there doing when they buy a case knife nice job great demonstration 😊be careful out there

[@ericasedc]

Thanks Pete!!!! You da man!❤

[@mikecurtis2585]

Very nice great sharping job! Love those Case knives! Have a wonderful day!!!

[@ericasedc]

Cheers🎉 Mike!

[@patrickhughes6174]

I can’t sharpen knives anymore without hearing your voice say “Might as well show up with a mirror polished edge Sodbuster- I might get extra lucky” 😅😅😅 Best line in a knife video EVER! Only a “knife person” would think in those terms…

[@ericasedc]

Hahahaha at your mom’s house!!!😂

[@patrickhughes6174]

@@ericasedc OMG- I literally had tears in my eyes from laughing when you said that in the video, and my dog was looking at me like “are you OK buddy?” Thanks for all the wonderful content. I still love my CRK knives, but at the moment I’m walking around with a Sod Buster in a Richter slip, thanks to you!

[@ericasedc]

@@patrickhughes6174 I love that!!!

[@nicoledodge7240]

This video was sooo informative!! Love all the detail you give us to better understand why and how to take care of our knives!!

[@sudz2789]

Perfect video timing, I was just looking at the Case display at my local hardware store.

[@ericasedc]

Ooooh there ya go

[@strongandco]

I'm sure some people will recoil in horror at what I did but If I recall correctly I had to flush the cavity and pivots carefully but thoroughly with WD40 on my jig bone handle case knives to remove the polishing compound and schmoo from the pivots and then I used a generic 3 in 1 on the pivots and behind the springs then wiped off the excess. Once they are cleaned and lubed Case Knives operate beautifully and have a very satisfying feel when you open and close them.

[@ericasedc]

Anything works!

[@strongandco]

@@Steelydan670 oh yeah, I get that, but I believe it can be absorbed by bone handles and stain them.

[@davidkurle5418]

This was fantastic! 👍👍 And that mini trapper was a great gift, I like the orange delrin. Enjoy carrying that one!

[@ericasedc]

I loooove orange!

[@justified_edc]

I do the exact same thing to my Case knives when I get them haha I usually use my Sharpmaker ceramic rods to knock off the burr, strop, then a touch of KPL (I use the regular but only because its just what I have). Great video

[@ericasedc]

Cheers my friend! ❤

[@cathybumgarner3579]

I have many Case knives. Came sharp I keep them sharp. Always enjoy having a case on me.

[@piperkennard1039]

Case always comes with a toothy edge. I always have to touch up sharpen my case knives but they will cut. Great video.

[@ericasedc]

Thanks a bunch! ❤

[@bigjsknives]

Great demonstration!!! Just some quick tlc and u got it tuned up nicely!!!

[@ericasedc]

Right❤

[@timm4269]

You're an absolute joy to watch since I recently discovered your lovely channel!!! ❤👌❤🤙❤👍

[@ericasedc]

That means so much to me. Thank you for watching!

[@littlemanscorner1718]

I still like Case knives, and will continue to support them. Thanks for the video

[@SoldierDrew]

I'm old enough to remember when American made knife brands like Case, Schrade Old Timer and Western came out of the box razor sharp. Now the best knife brands come out of Scandinavian countries. I couldn't afford a Case Sod buster so I got an Imperial Sod buster knife and despite three years of daily utility use: cutting weeds, cutting boxes up, opening mail, cutting up vegetables & fruits, cutting meat, carving wood, opening plastic packages, gutting fish, cutting finger nails, gathering herbal medicines, the blade remains sharp and holds an edge.

[@stevenchisholm2364]

I love Case Knives..but you are so right about the burr...i have at least a dozen out in the garage ..thanks..im going to go tune them up!..Steve from Nova Scotia ,Canada

[@ericasedc]

Hi Steve!!! Thanks for tuning in!🥰

[@devatwell334]

Hi Steve from ns aswell! Hope ur doing well

[@snowtiger44]

I like when the knife has a nice half stop

[@ericasedc]

Same❤

[@larrymackerethjr.3812]

Agree

[@nwjavahead]

Do something very similar. Now we just need to get you that stockman to compare! Thanks, your video came at a very good time.

[@ericasedc]

I have a stockman!

[@pj311foo]

Had to come back to this video. I always carried a cheapy knife. Then I saw this video and learned about case knives. I bought the orange mini like in this video and thought it was really cool. Then I bought a bone stag trapper and wow. Then it turned into miniature artwork for me. I even drove to SMKW to look at them. Well now I have 11 case knives and I fiddle with them a lot. Great knives and a fun new hobby for me. So thanks for showing Case knives to me Erica. Love the channel. Take care 😊

[@TucoDog-ho6fw]

I’d love to spend some time at SMKW. I’ve seen some videos. It looks fabulous 👍🏻

[@SaltyMike396]

Another great video! I'm waiting for my Sod Buster Jr (1095) and large Stockman (cv) from SMKW. Can't wait! I also can't wait until your "Use your shit" t-shirts are ready for sale😃

[@ericasedc]

I need to make some huh!?

[@SaltyMike396]

@@ericasedc for sure!

[@52snuffy]

Great video Erica! I love Case knives and I also follow a similar process when I get a new knife. Your channel is always a worthwhile destination on KZbin. 😊

[@gladeshunter8796]

I thoroughly spray all mine with panther piss to remove all the polishing rouge left in the knife .It usually improves the walk and talk noticeably .

[@ericasedc]

I dig that!!!

[@bigdrj2223]

Enjoyed the video, great info! On really gritty pivots I’ll use wd40, move the blades partially open to open the springs a bit, and use an air hose (or compressed air) to blow into the pivots while knife is on a towel. Amazing the gunk that blows out.

[@ericasedc]

Great info!

[@lylesmith5079]

I've been using Case knives for many years and didn't know this. Appreciated !

[@ericasedc]

Thanks for watching!!!!

[@clownworldresidentii5184]

"sent from my Orb" - if you watch Cedric and Ada you know what I'm talking about 🤣

[@ericasedc]

Saw that a while ago!

[@ColdHarborOP]

Beautiful scale color on a very attractive knife. Thanks for the great content.

[@Alan-x8p4l]

That is a beautiful knife. I love the orange scales and I like the traditional slip-joint knives because they take me back to the pioneer days of the pocket knife and, in public, eyebrows don't raise when you pull it out to open a package or whatever. For the most part I'll carry my larger knives when camping or other outdoor activities,although, the Case knife is sufficient, for the most part, while camping, etc. Great video; Thanks for sharing. 😀👍

[@ericasedc]

@@Alan-x8p4l thanks so much for stopping by!

[@sovner]

A few times when i've recieved new Case knives, i've found that the spring is raised a little bit higher then the liners when the blade is open. So i've actually found myself filing down the surface of the blade which the spring is resting on, and folded som pieces of paper to clean out the gunk. However there is always a risk of skraping against the liners when i use that file. I think at least one time i caused a little bit of side to side blade play when i did that😅

[@ericasedc]

So many silly things!!! Why do we still buy them🤣🤣🤣

[@Bladeblinded1957]

Helpful video Erica the wire burr on the. CaseXX knives is a given I guess thanks for the hints on blade care

[@ericasedc]

Cheers❤

[@davegoodridge8352]

Thank You for the lesson.

[@ericasedc]

Thanks Dave❤

[@Orion64-y4w]

Great video. I use White Lighting knife and tool lubricant. It's uses an ultra thin carrier to take a wax film into the pivots. The carrier evaporates and as you work the blades the dry wax causes the dirt an debris to shed out. I will give that KPL oil a try also.

[@ericasedc]

Thanks for the info!

[@jackhenry290]

You make awesome videos. Really impressed with your style and variety of content.

[@wttatb]

Just about jumped out my of chair when you said KTP, Best store ever...

[@franka9760]

Just a thought about your camera not focusing... will wiping off the lens before you shoot help?

[@ericasedc]

I do every time trust me haha

[@joannearduin7801]

You got it girl, exactly what I do, much of this is common sense but good practice.

[@gbh1913]

It's an old fashioned way to produce a knife. Back when they started it was normal for manufacturers to leave a burr so you could finish sharpen to your liking. Nothing wrong with it just grab ya a good strop and some compound and work it off. Easy tip if you have a large stubborn burr cut it gently into some wood and it will pull off some of the burr.

[@kevz9364]

I do like case knives as well, but they do need some work to get them going. Sharpening most of the time, on a few, I've needed to put them in a vise to tighten bolsters adjusting blade play and alignment issues.

[@ericasedc]

Yep!😂

[@jackbachman1385]

Cant wait to see you test the knife

[@ericasedc]

May is gonna be FULL of testing!

[@kayok07]

Picked up a natural micarta large stockman I clean up the edges than use them till i need to put them on the stone great content as usual 👌

[@paulyoder865]

I used electric barbershop clippers oil on mine, works great.

[@yliyahhawkins3372]

Hey Erica, ...yep...dats about it. Only things else left to do I guess is "Dinner and a dance"... Awesome video as usual. I got a Case Large Stockman in Amber bone, peach seed jig, 6375 True Sharp SS coming by Friday. Perfect lil " knivideo" to watch in anticipatory splender. You so cute!!!!!❤😘. Gunny.

[@MrLittlmike22]

Love the videos Erica You may have covered this but I would love your recommendation on pocket system for trafitionals Something light small Maybe even packable in a slip pouch ?

[@franka9760]

So from what you're showing it seems that Case knives are not ready for primetime when they leave the factory. Good thing they don't charge too much.

[@ericasedc]

Correct!

[@RICHARDMOORE1959]

Your right,aways a factory burr,damn it.P.S. nice hank..❤❤❤

[@ericasedc]

Cheers!!!❤

[@ishkabibble2204]

My day was great! My life is awesome! Thanks for asking.

[@ericasedc]

@@ishkabibble2204 🥰

[@joegrace5818]

Wait… KTP has case knives? I didn’t know that. Might have to stop by there on my way south Friday evening!

[@ericasedc]

They must!

[@joegrace5818]

@@ericasedc stopped by ktp yesterday. They had a ton of kershaws, spydercos and Benchmades and a small display of case knives. Parking was a nightmare.

[@ericasedc]

@@joegrace5818 I’m sorry!

[@joegrace5818]

@@ericasedc no reason to be sorry! It was a fun trip! It’s a great store for sure!

[@Knife_guy]

What a coincidence I get a new Case knife the same day you post this. One thing I would add is if you get a jigged bone model: use a buffer wheel or Dremel with a buffer wheel without compound on the handle. This will clean out some left over compound in the jigging. Also how am I supposed to get my own @richterknives slip if you keep filling up his books? 😂😂😂. Just kidding

[@ericasedc]

I will forever be on his books🤣

[@marcelpfeiffer6587]

Great Video both in explanation and in result. Still can,t understand why Case does such poor edges on a American made product.

[@ericasedc]

I know😂

[@SevereTstormFan]

Excellent tips, I would not have thought of. For honing, do you think the same result can be accomplished using a sharpening stone?

[@pauljosephbuggle3722]

I got a new Case Muskrat in CV. It's a beautiful piece. However, one of the blades is a little proud in the open position. I am not sure what to do. They say I have to file the tang a wee bit, but I don't know how to get in there without scratching the shit out of the surrounding area. I know it's a bit OCD but a blade should be flush.

[@ericasedc]

Agreed

[@clownworldresidentii5184]

Have you used an ultrasonic cleaner for a knife? Sometimes I do that and I'm surprised at how much gunk I collect lol

[@ericasedc]

Never!

[@SpecialEd_59]

Good stuff, thanks!

[@ericasedc]

Thanks for watching❤

[@marklawrence855]

I have a question, i have just got a buck 112 ,problem is when the blade is closed the tip of the knife sticks up a very tiny bit, bit if you run your finger over the tup when its closed will cut your finger. Is this normal for buck knives?

[@SevereTstormFan]

That’s not normal for any knife brand. The tip should not be exposed at all when closed.

[@gabehixenbaugh1997]

File the kick a little bit at a time till the tip tucks down in the handle. Or take advantage of bucks warranty. They’re easy to deal with and will probably just replace your knife.

[@SHANECatLovinActivistHistorian]

i use a flat file, or diamond file depending on how rough the edge is, then the ceramic sticks and then strope it on cardboard

[@ronaldbundick9898]

I like Case knives & Own Several,but the factory edge is not good .

[@ericasedc]

Yep!

[@georgia_adventurer]

Good Sharpening video

[@ericasedc]

Thank you Randy!!!❤

[@johnkeck1025]

Don't underestimate those little wr case knives.. their real workers now! I've carried them off and on for years and they keep on truck'n.

[@mikeyankie9594]

Thanks Erica, I'm learning from you...

[@ericasedc]

Awh❤😊

[@richterknives]

Great video!!

[@ericasedc]

Thanks Richtaaaa!

[@Rancherinaz]

I’ve never gotten a Case knife that didn’t come with a factory burr . Case ,… The knife you love to hate . Or the knife you hate to love . 😆

[@woodentulike2no]

Fun fact Case Knives have a burr Edge because it indicates that the knife is mint and has never been sharpened as soon as you sharpen the knife it is no longer Mint

[@TheHallbjorn]

The Bucks I've bought recently have been so full of polishing compound grime they wouldn't even close properly

[@happysingle6240]

That's why I buy BUCK knives , the USA ones.

[@kennethzullick6897]

Buck knives are junk, too brittle

[@hydrophobicbathtowel6816]

I dont know if this is good or bad practice, but i have a three step pull through sharpener and i always take a brand new knife, including case, and run it through the third step ceramic rod sharpener and it always seems to help quite a bit. Im not great at sharpening so i use store bought pull through sharpeners so i dont immediately ruin my edge.

[@ericasedc]

@@hydrophobicbathtowel6816 oooof. That ruins the edge more actually!!!!

[@hydrophobicbathtowel6816]

@ericasedc oh no. I ruined multiple knives trying to sharpen by hand so i bought the knife sharpener hoping itd help. 😞

[@ericasedc]

@ nope. Those are the WORST! Did you try a fixed angle system yet!?

[@hydrophobicbathtowel6816]

@ericasedc i will look into this, thank you for the help.

[@ericasedc]

@ any time my friend!

[@jocelynlacharite]

Hi Erica, I like to use mascara brushes to clean inside my knives, they work fine!

[@gerardmartyn1738]

For oils I prefer mineral oil. Food safe and no nasty flavor. Use it on pivot and when I use an oil stone. But I actually prefer water stones.

[@ericasedc]

Nice!

[@lostcat9lives322]

Baby oil is mineral oil with perfume added. I shoplift mine from dollar stores.

[@dualsportoutdoors]

Handy info to have. I need to get another Case. I have a Bear and Son Trapper in 1095 currently

[@ericasedc]

More Case!!!!

[@dualsportoutdoors]

@@ericasedc I have a couple of them on my birthday list (I give no fucks about my birthday but my wife requires me to have a wish list lol)

[@ericasedc]

@@dualsportoutdoors oooh yay!

[@dualsportoutdoors]

@@ericasedc I've been carrying only budget level stuff since I started Dave Ramsey's baby steps plan just to make myself feel more broke while I crush debts. I had forgotten how much I liked traditionals until I started rocking my Buck 110 and my Bear and Son. Definitely makes me want more traditionals

[@HD-J.R.]

I agree with the process and the reasoning, but I do this with every new knife, even a $400 Benchmade. Maybe just a little too much shade on Case. I like to use ceramic as a touchup or final hone. Smiths used to make a variety of lengths in both fine and medium. I have a set I purchased and dated 1984. They were the top name in sharpening once upon a time. Good job and a great demonstration👍

[@ericasedc]

Thank you for watching and commenting!

[@donc5220]

More Orange!! YEah!!

[@ericasedc]

Yaaaas❤

[@gregvanderlip7726]

Great vid for upkeep on slippys

[@stevensims2841]

Love case

[@ericasedc]

🥰

[@knownbarkert6153]

I like to use a new case without any oil for a week. Regular use. It'll free the pivots up just enough to my liking. Then I oil regularly

[@terrillschneider3778]

I love a Mini Trapper bc of the half stops Okay so I use my ceramic rod or my Lansky Box My strop is two sided and I use Flexcut Gold and the other is hard leather I find that I can get the Spay Blade almost like a razor I mean all my blades will shave the hair off my arm but the Spay is like a Straight Razor I am too chicken to try it on my face lol I use Ballistol for my lubricant guns and knives Some of my Case Knives and LOTS of my Bear and Son Knives have come so loaded with grit that the blades were locked up and wouldn’t move till I washed the grit out with Ballistol You and I do exactly the same things to our new user knives except we use slightly different products but as my dear departed grandmother used to say Great minds think alike Love you more E

[@ericasedc]

I love you mostest T ❤

[@ElwoodPDowd-nz2si]

Carrying a cell phone stopped my every day carry. I have several peanuts that I used to enjoy carrying.

[@wildfree4203]

One thing you need to do when you get a new knife 80% of the time: put your own edge on it!!!! knife manufacturers these days just can't do it right!

[@ericasedc]

Mhm!

[@redsvette]

Links for strop and oil please!

[@ericasedc]

Watch my strops video under my sharpening playlist for the items I maintain my knives with- thanks!🥰

[@michaelbragg8763]

Bought a Case knife on vacation, did not check it out at the shop. Long story short, the knife had a wobbly blade when I unpackaged it. Sent the knife to Case for repair, 4 months it had not returned. I called they sent it back untounched.

[@ericasedc]

Yuck!

[@SubUrbanNinja-EDC]

For the money case charges, there is no excuse for a knife not to come sharpened properly. It should not need sharpening for a while with proper none abusive use...only stropping. Sharpening is a major task for a knife and should not be viewed as something routine. Unless it is commercial application, and even then its a major task. $20 knife? Okay, I expect it to be dull and need a sharpening to put an edge on it and if it is soft steel then sharpen more often. But $60 to $150???? Sorry, we should not except nothing less than proper sharpness from the factory.

[@ericasedc]

Thanks for the input!

[@oferbechor1717]

Thank you very much see you at your next one 🐬🌈🐬

[@SoldierDrew]

@GlockNinja, your words are unadulterated truth.

[@kayok07]

Fine edges on Case knives roll quickly due to the steal they use they have a rougher edge due to the process you pay for hand made USA not Chinese parts assembled in USA like most benchmade knives. I put them on a strop and use them just fine

[@MikeyNewman1974]

I don't own any Case knives but I do have Rough riders that come the same way, they always get a blast out with metal cleaner to get the crap out, then a blade touch up and oiled! Go use your shit!!!!

[@ericasedc]

Woo!!!

[@davidcarothers3311]

​@@ericasedcBut what about Moe Griswald and Norman Crinchmeyer? Are they still eating all your cranberries??

[@lukehorning3404]

Are you from Maine?

[@glodavhog]

great video,.......where do you get the lube

[@ericasedc]

I believe I said in the video- Knife Pivot Lube❤

[@rcjoe406]

I just got my 1st case a trapper has more gaping then my rough rider and the spey blade is off centered very disappointing

[@ericasedc]

@@rcjoe406 not surprised ):

[@kek148]

Much better knives out there for the money (my opinion).

[@Headhighinc]

Taking notes 📝

[@denofearthundertheeverlast5138]

That looks like a full size trapper instead of a mini.

[@riflemaster4743]

Yes

[@tomquirin4231]

hey erica , hope all is well with you , great vid , i only have email here , i am tracking down some tactical items/stuff for trade here only , if you know anybody or know any military guys , send em my way please, thanks n talk soon > tom !

[@ericasedc]

Have a great day!❤

[@tomquirin4231]

@@ericasedc till i go to work, lol, lol, email me , we'll talk more girl , thanks > tom !

[@Jordanhunts_]

Kittery Trading Post!!

[@ericasedc]

@@Jordanhunts_ love that place!

[@Alan-x8p4l]

Case needs to be responsible for making sure that their blades are lubed and functioning properly before sending them out and centered blades. Case is a USA made knife, don't let the Chinese whip your a** in quality. Get it right, Case. 🇺🇲😎👍

[@ericasedc]

@@Alan-x8p4l agreed!

[@jamesadams1357]

I'm not gonna lie and please don't take this the wrong way. I was a little skeptical when I saw a female doing this. However I was wrong. Young lady you killed this video! She definitely knows her way around a blade and her experience showed! I learned a lot about a case factory blade and appreciate your efforts. Well done!

[@WhiteTrashTennessee]

She aint gonna sleep with you bro

[@jamesadams1357]

​@@WhiteTrashTennesseelol my woman is much finer but sounds like you got problems bro. Was trying to give her a legitimate compliment but whatever

[@jamesadams1357]

I'll be sure to never watch another though

[@acid6urns]

@@jamesadams1357bro ur just outing yourself as a sexist bigot bffr

[@Vpentrov]

@@WhiteTrashTennessee Did you even read the comment?

[@Revelation1316]

Weeeeeeeee...! 💃💃💃

[@stevemota58]

Case traditionals

[@SquireSCA]

It is annoying that more often than not, one has to repair brand new knives from Case. I won't buy a Case knife unless I can go through a pile of them and find a "good one"...

[@WhiteTrashTennessee]

You are so full of shyt. Or buying fakes from amazon or oine.

[@acid6urns]

@@WhiteTrashTennesseeit’s pretty well known that case has absolutely fucking garbage quality control and fit and finish.

[@chrisandsneaky2453]

@@WhiteTrashTennessee You're the one full of shit. There are two Case Master Dealers near me and I have bought from both of them. For every purchase, I have had to go through their stock to find a good one. On average, 8 out of 9 were badly put together. All of them have a nasty sharpening burr because Case simply refuses to put a good edge on their knives. I can sharpen a knife, but I can't fix blade wobble, off-center blades, and gaps between the scales and liners.

[@elvinnewman102]

come help me with knives, can you cook ?

[@ericasedc]

Of course I can!🤣

[@elvinnewman102]

@@ericasedc I would Love to Have You onboard.

[@airborne488]

I hope your friend that bought that knife paid some type of factory second price for it. I would send that one back, but probably get the same thing on return. It's like Chinese made brands are looking better these days.

[@howardkayecrabyman]

If you don't like case knives don't buy them get your over priced Chinese knives Kizer and the such

[@jonirwin7316]

Shame that Case = crap.

[@randypangborn7213]

Better than any Chinese shit

[@johntatum5979]

The 1 thing I would do with a case knife is throw it in the garbage can. They do not take pride in their work anymore. Downfall of one of the most iconic knife brands ever.

[@ericasedc]

Thanks for your input- I appreciate you!

[@jamesstephenson2346]

You do nothing but complain. It seems more a you issue. Youre literally making shit up to bitch (if you arent just trolling because you are dumb)

[@acid6urns]

@@jamesstephenson2346they have a point. case’s fit and finish and QC is garbage these days.

[@tikkidaddy]

As a matter of course I do this to EVERY knife I get from a production company. Its just the way it is. I normally do not use CLPs or penetrating oils on the handles because sometimes that stuff gets into the scales. Food grade light mineral oil works well for me and I don't use my knives as fidget spinners. You can mash the end of a q tip with a pair of needle nose pliers or even whittle down a popsicle stick to help clean out blade channels

[@giantfatberg]

Very cool. I didn’t know Case got much love these days especially from the younger part of the community.

[@ericasedc]

I think it’s only me🤣

[@giantfatberg]

@@ericasedc 😊. I have feelings of nostalgia for Case since those knives were a part of my childhood and relationship with my grandfather. And I have been enjoying your channel and recommendations. You turned me on the Archie at NGMCo and his fine work. So hard to get but so good and worth the effort

[@scotimotti]

I have 3 case knives. I cant get any of them sharp. So no more case knives for daily use. I put them in a box for the grandkids.

[@ericasedc]

If you sharpen them they’re razors! Just gotta put your own edge on!

[@jremeee1599]

Probably a SS blade. Get a Carbon Steel or CV blade case. You’ll be impressed.

[@kennethzullick6897]

First you should learn how to sharpen a knife. I have many case knives and can shave with any of them.