Casio G-Shock DW5600: The Found Button Explained

I wanted to fix the issue with the recessed button since I got the watch and in this video I show you how I did it. The quintessential G-Shock has no flaws now. Please like subscribe and leave your comments.#CasioGShock​ #Casio​ #CasioDW5600

[@woodentulike2no]

I think the reason Casio has that adjust button recessed is so it will not be accidentally pushed while wearing it you have to be very determined to use that button so it will not adjust your settings unless you want it to.

[@ashtradam]

Yes, that's the reasoning but I've never pressed the other three by mistake. It's so much easier and more useful since I fixed it. Thanks for watching

[@warrentanneriii3672]

@@ashtradam I just posted my comment (on your first review) about the button getting pushed in accidentally when pressed against my arm on the Illuminator 50m. That has been annoying when it happened. It's happened a few times now. So, as I said in the other comment, I have the G Shock coming and, at this point, am looking forward to not being able to accidentally depress that button. However, if it's a problem ... could you send one of your extra buttons?? 🙂

[@Davey97]

I've learned to deal with it. It was annoying at first, but I kinda live the recessed button now. It's cool. I just grew my finger tip a bit

[@LeShark75]

Nice, I'll leave mine as it is due to having no issue with the recessed button but good on you for seeing this through. Great video.

[@ashtradam]

Yes, definitely leave as is if it works for you. Thanks again for watching

[@sci-fyguy7767]

This was the most useful mod I’ve ever seen done to a G-shock 5600 square. I wish they came with the adjust button the same length as the 3 others. With the way the buttons have the cutout guards around them, I don’t think you would ever be able to accidentally push in the adjust button with your wrist. I cannot activate the button at all with my finger or thumb & have to use my fingernail to do it! It’s an absolute pain & my biggest complaint about the G-shock squares which I love. I have 3 squares: the classic 5600e, the blacked out 5600bb & the clear skeleton 5600sk. 🔥I think it’s absolute overengineering of a button that needs to be used too often to be this hard to operate.

[@ashtradam]

Hello Sci-Fy guy, thank you for your comment. I felt the same way, when I started wearing the watch. After doing some research, and realizing the button was intentionally made that way I needed to fix it. I figured I'll make a video while I was at it for others to see it was possible. There is a split on opinions about this but I have never pressed any of the other three by mistake. I can set a timer while walking, or in the dark no issues at all. This makes it far more useful, and if anyone values the utility of this watch it shouldn't be difficult to operate. It's a tool watch and you shouldn't need a tool like a pen to push the buttons. Thanks for watching

[@MayTheSchwartzBeWithYou]

I bought the 5610 with the hope that the button will be easier to actuate. I know it's still tough, but I heard its' not as recessed as on the 5600.

[@ashtradam]

@@MayTheSchwartzBeWithYou How are you liking it?

[@MayTheSchwartzBeWithYou]

@@ashtradam Just received it last night. I'm happy to report that the adjust button is definitely not as impossible to actuate as the DW5600E, although it definitely isn't anywhere close to as easy (or as enjoyable) to actuate as the DW290, my copy of which is within its return window but I'm tempted to keep simply because it's so much more ergonomically comfortable/convenient/pleasing than the 5610. I hadn't realized it when I ordered it, but my 5610 came with an aftermarket composite "combi" bracelet which is quite nice but is either too loose or ever-so-slightly too tight on my arm, which is also the case with my DW290's resin band. I do like the slim profile of the 5610, compared to the DW290 which is slightly thicker in every dimension. Unfortunately, I couldn't pass up what I felt were two good deals on eBay, and so in addition to the 5610 with a positive screen I currently have, I also have a 5610 with the negative screen coming my way as well. Between the three of these watches, I think I should be all set...until my eye catches the next shiny object.

[@ashtradam]

@@MayTheSchwartzBeWithYou You should go with what you feel best suits you. The 290 is a G-Shock but has its own following. The prices for the 5600 and 290 are just a couple dollars apart on Amazon. Are you saying the 5600 came with an aftermarket strap? I'll be doing a video on this soon so look out for it if you are interested. The saying goes you can't just buy one G-Shock but I've only has this 5600 although a couple more have caught my attention, but I'm holding off. I think you're set with those if they do what you need them to do. I wear the 5600 most often now. Again thanks for watching and your comments.

[@jeshu8372]

Excellent solution, I will do it right now with my new watch. The problem with this Adjust button is that it not only serves to change the time but also to reset the stopwatch and timer and that requires a button that is easy to press. Greetings! Update: I just made the change, in the process I lost the c-shaped adjustment piece, after searching a lot I used one from another damaged casio watch I had, otherwise I don't know what I would have done. The change is noticeable, however, this watch in itself is difficult to press the buttons due to the shape of the watch, perhaps it is not the best watch for day to day or for sports and using the stopwatch and timer.

[@ashtradam]

Hey there, it made my watch easier to use and thus more useful. I set timers regularly and the main reason I made the switch. Those tiny clips are called gibs but they do look like e clips also. Good you got it working like it should, and I think Casio needs to fix this.

[@relojesdinamicos364]

Thank you so much for this solution. I was actually thinking in doing the same, buy another exact watch for spare parts, but I got the idea to swap the light button (which is easier to press even if it is resessed) with the mode button. I'll let you know if it works.!😉

[@ashtradam]

Hi JJ, I'm happy this video helped and yes the light button will be easier to press even with the switched button because of the location. Please do let me know if it worked like you expected. Thanks for watching

[@Jell0zz]

Did you switch them around? And did it help?

[@relojesdinamicos364]

@@Jell0zz Friends, i'm happy to report that I made the button switch, and it worked just fine. Now the resessed button is the light one and the watch works perfectly on the stopwatch and timer. It also maintains the usual resistance to water, shock, vibrations , etc.

[@Jell0zz]

@@relojesdinamicos364 Nice! I found a parts store that shipped to my country at dirt cheap rates, so I ordered a replacement button + negative screen :)

[@ashtradam]

@@Jell0zz No, I replaced the adjust button with another button from a new DW5600. I can set countdown times easily now and yes it made a big difference. Thanks for watching

[@josephbearup4787]

Just bought my first 5600 and At first looks My Adjust Button looks like it’s Mashed in. I was gonna Send it back to Seller Cause his Description says PERFECT CONDITION NO ISSUES and to me Looks Broken. thanks so much for Vid This Watch is Second Hand and Paid 65$ for It now I feel a bit better

[@ashtradam]

Hello Joseph, happy my video made your decision easier. No, it's not broken that's the way Casio made this particular G-Shock. Enjoy your watch and thanks for watching

[@JoseAngeelC]

Same happened to me lol

[@ashtradam]

@@JoseAngeelC Hey Jose, most people I'd say rather it was a normal button as the video shows it's shorter. Some actually prefer it that way but it makes it less useful. Thanks for watching

[@ManooPaulose]

Ha ha ha. I also had the same thought. At first I thought they send me a defective piece. Then later on I understood that Casio gave me a master piece. They had calculated pretty much everything before producing the final product. This watch is literally unbreakable, can be used for any kind of harsh environment. It's worth it. Mind blowing. Iconic legendary vintage looks, comfortable and display light is similar to timex watches. Have features that are needed. Nothing more nothing less. No words.. Simply mind blowing.

[@dunderhay9169]

I know I'm late watching this, but great video thanks 👍 . Before I ordered my dw5600e I heard the adjust button is a pain, so I ordered a new standard Casio button. It seems good value at £5 delivered but is 10% of the £50 watch price 🤣

[@ashtradam]

Hi, I was not finding replacement parts, so I decided to get a new watch. I have since used screws from it and even the bezel. I'm happy to hear it helped because it makes the watch easier to use, which is its main purpose

[@dunderhay9169]

@@ashtradam Yes, if the button was only for setting the time it would be OK, but it is needed for the timer and stopwatch modes too.

[@sitofak]

Thanks for the video. Why is this never mentioned in reviews? I got the 5600 just a few days ago and I thought it was defective when I tried it. So frustrating. I wouldn't mind if I only had to use it once a month to adjust the time but it makes the other functions like timer and stopwatch a huge pain to use.

[@ashtradam]

Hey there, it's not mentioned because some don't think it's an issue (being that it prevents from mistakenly pressing the adjust button) but that's never happened with the other three. Since the fix it's been more useful, like you said for timers and the like. Thanks for watching

[@LeChristEstRoi]

I also thought it was a manufacturing defect! When I received my watch I was super pissed and about to get a refund! Then I learned it's a normal feature...There's somewhat a learning curve using this button, and you might or not get used to it...but still not very practical for someone who needs to use frequently the stopwatch. In this case it's better to get another watch

[@RobertNES816]

Casio should have a time delay with the adjustment button like they have with their other watches like the G5600 for example where you have to hold the adjustment button down for a few seconds before the watch enters adjustment mode. This way you can have all the buttons set at the same height. Also something to note the bezel for the GW5000 has a better fit and the adjust button sticks out a little more.

[@ashtradam]

Hey Robert, that would be a good solution. I noticed that the adjust button does have a different cutout compared the other three which contributes to the difficulty besides the button being shorter. Looking at the Gab-2100 you clearly see the adjust button sticks out and many others Casio makes. Thanks for watching

[@RobertNES816]

@@ashtradam the adjustment button is meant to be pushed with a fingernail. Casio made it difficult to push so you don't put the watch into any adjustment mode. But at the same time it makes it difficult to use the split and reset functions on the stop watch, but again if you use your fingernail it makes using the button much easier.

[@Jell0zz]

How did you manage to get that miniscule clip off. Edit: I managed with a very small flathead screwdriver, now for the harder part.. getting it onto the replacement part :D Getting it back on was relatively easy, holding it tightly with the tweezers and pressing them onto the stem until you hear/feel it click.

[@ashtradam]

Hey there, you also want to make sure the clip is seated in the groove at the tip of the pusher so it doesn't slide off. Also pulling the clip off didn't work I had to pop it off from the underside. Did you complete the swap? How does it work now? Thanks for the comment

[@Jell0zz]

​@@ashtradam I managed thanks to the video and some fiddling! It works a lot better and I can now use the other functionalities a lot better, since it registers every button press. I didn't see a groove myself, but I noticed a distinct click. If Casio Reps ever come across this video they oughta rethink their design choice with this 'special adjust button' because it's 10x worse than the regular DW5600 button I replaced it with.

[@user-sy2nl7sz8r]

@Ashtradam, a somewhat off topic question related to the DW5600: I've read somewhere that if you press and hold the upper left, lower left, and lower right button simultaneously (I think it is some kind of LCD diagnostics), this will bring you to the service screen (screen test) or the like. This would also be an indicator that you own an original Casio watch. However, I recently bought a G-Shock DW-5600E (from an authorized reseller of Casio watches) and I have tried to do this basic step to no avail; nothing happens. I have now begun to wonder if I have been sold a fake G-Shock, since I have been able to this and similar diagnostics test on all the cheap Casio watches I have previously owned. Basically, I really want to know if I should expect this feature on the 5600E or not? Also to anyone out there reading this: If you own a legit G-Shock 5600E could you check your own and see if you are able to do this diagnostic on your watch. Sincerely M

[@-Binoice]

im facing the exact same issue in my DW5600 BB

[@user-sy2nl7sz8r]

@@-Binoice ah, I see. Btw, is your watch made in China as well?

[@ashtradam]

Hi Binoy, I posted my reply. Thanks for watching

[@ashtradam]

Hey there, so the DW5600 buttons are listed as top left (A) top right (B) lower left (C) and lower right (D). I think you are just pressing the wrong combo, try pressing A, B, C and that should show the information you are looking for. Cycle through using (B) thanks for watching. Let me know if that helped

[@user-sy2nl7sz8r]

@@ashtradam It worked!!! Thank you so much!! I was indeed pressing the wrong buttons ;). Sincerely M

[@valengreymoon5623]

I've done this mod on mine, but instead of buying a new one just to tear it apart, I bought a used one for around half the price. Considering a set of either case-back or bezel screws go for over $20 a set, getting an entire watch for that price, is a great deal.

[@ashtradam]

Hi, how do you like the watch after the mod? I decided on a new watch for extra parts like the bezel, strap, screws etc. Hope the video helped and thanks for watching

[@valengreymoon5623]

It works as it should. I've also got a factory-restored DW-5600C with the 901 module.

[@ashtradam]

@@valengreymoon5623 I got the GW-5000 band for it

[@Bobby2soft]

Hello, thank you for sharing your idea. I'd like all the buttons to be at least 1mm longer. I have a GW-B5600 and a Baby-G BDG-565, and both those watches could use longer pushers overall. My problem is, official information on the length of those buttons and accessibility of replacements seems to be obscure. Any idea which other models would fit those parameters? Thank you

[@ashtradam]

Hi, I wish they all the buttons were longer too. I don't think they sell official ones but even if you find them it's about $15 per button. Let me check and I'll get back to you on possible options

[@Bobby2soft]

@@ashtradam Aren't you a gentleman, much appreciated!

[@Bobby2soft]

@@ashtradam Hello, did you have any luck with this?

[@ashtradam]

@@Bobby2soft Hi, sorry for the late reply been off here for a bit. I'll have an answer for you this week.

[@Bobby2soft]

@@ashtradam Magic, thank you

[@oklahomahank2378]

Almost all Japanese products use JIS screws, which look like Phillips but are not. It is easy to strip JIS when using a Phillips. The money I spent on a JIS set was well worth it.

[@ashtradam]

Hey Hank, this watch is made in Thailand I just looked and it's not JIS because there are no dimples. Good catch as I did have some issues getting those tiny screws out. Thanks for watching and your comment

[@oklahomahank2378]

@@ashtradam Not all JIs screws have the dimple. You can use JIS on regular phillips and they work well.

[@loslosthuy]

Just bought one had no idea that button was recessed, its driving me crazy! thanks for the video huge help. going to try this within the next few days. Did you notice the water resistance being impacted at all?

[@ashtradam]

Hi, it was a problem for me as well that's why I fixed it. The water resistance has not been affect and has been submerged in water many times since the fix. It works perfectly and more functional since I use the timer often. Just take your time and set the rubber o ring in the groove (like in the video) plus tighten the screws properly. Thanks for watching

[@loslosthuy]

@@ashtradam good to know! Ordered a second watch gonna try this upgrade tonight. Seemed simple enough

[@ashtradam]

@@loslosthuy Yes, and you have the spare for parts if needed. Let me know how it turns out

[@loslosthuy]

@@ashtradam got it done tonight. Pain I'm the ass for that little clip. I ended up not using it and it's working fine. Waayyyy more efficient and easy to use. Thanks for the vid!

[@ashtradam]

@@loslosthuy Hi, that gib clip serves the purpose of keeping the button from possibly falling out. Good it's working for you though and happy the video was helpful.

[@Kille1967.]

Smart. 👍

[@ashtradam]

Hi, thank you. It really did make the watch easier to use

[@fankaar3160]

I just returned my casio 5600 DW 1VQ as I thought the adjust button is a manufacturing issue 😅 I got a replacement ordered but.

[@ashtradam]

Yeah, it's manufactured like that. Sorry. Are you considering getting anything else?

[@Cheusow]

Hello! Thank you for the video. I constantly struggle with the setup button on my 5600. I heard that you bought a 5600 watch for parts. I beg you to sell me one extended button (you still have two left hahaha). Thank you. I'm waiting for an answer. Alex.

[@ashtradam]

Hi, it would be easy for Casio to fix this issue, but more people need to complain. I could just send it to you for free, but only if you are in the US. Where are you located? You'll have to give me some time, because I'll have to open it up to remove it. Thanks for watching

[@Cheusow]

@@ashtradam Hello. I'm incredibly glad to hear your response. I recently arrived in the USA from Ukraine. I now have an American address. Where should you write your address? Thank you again.

[@Cheusow]

@@ashtradam hi. Sorry for reminds…

[@ashtradam]

@@Cheusow Hi, haven't opened the watch yet but what's your email and what state are you in?

[@Cheusow]

@@ashtradam I am in the Naples, Florida. Came here from Ukraine. I can not to write my mail, because KZbin deletes them. Do you have Instagram?

[@scottschoppert9149]

I turn my wrist to the side and stretch my arm out then I take my thumb and push it into the button

[@ashtradam]

Hey Scott, yeah I did that but it became annoying. Now, I don't even think about it when I need to set a timer or make adjustments. Especially a timer while walking, thanks for watching

[@BAR-ct7ti]

Bro, get to it already!

[@ashtradam]

You know you fast forward right? It was an instructional video

[@langstonrowe8243]

Why don’t you just wear the new watch??🤔

[@ashtradam]

Hi Langston, the new watch has the same problem. They all do, from what I gather and that's why I fixed it. No issues now

[@kennnethbrown7582]

I have this watch 5600 I also have 9052

[@ashtradam]

Hey Kenneth, which do you like better?

[@kennnethbrown7582]

@@ashtradam Gosh I do not know which one I like better

[@ashtradam]

@@kennnethbrown7582 That's okay if you don't have a fav

[@alessandrocerioli2151]

Imo a solution to a problem that doesn't exist: the adjust button was recessed in order to avoid unwanted modifications on timekeeping. Older quartz even had a smaller and more recessed button that could be pressed just with a ballpen.

[@ashtradam]

Hi Alessandro, it might be so but how do you explain Casio making other G-Shocks with huge buttons that stick out? I can set timers on the go with ease and it's much more useful now. Thanks for watching

[@alessandrocerioli2151]

@@ashtradam ALL the old G shocks (5X00s and 6X00s) had recessed buttons. And I personally Like it.

[@MayTheSchwartzBeWithYou]

@@alessandrocerioli2151 You think not being able to press the adjust button isn't a problem?

[@alessandrocerioli2151]

@@MayTheSchwartzBeWithYou millions of people can press that button so this problem doesn't exist.

[@MayTheSchwartzBeWithYou]

@@alessandrocerioli2151 I'm sure no scientific study was ever performed to validate that claim, but I bet millions of people can't press that button. As a guitarist, I have long, bony fingers, and if I have trouble reliably pressing the button 100% of the time, I know my parents have no chance of pressing it. I didn't ask my wife, but considering her fingers are shorter and less skinny than mine, I bet she couldn't reliably press it, either. The fact is that there is no reason for the button to be so excessively recessed. The DW-290's buttons are significantly less recessed, and I've never encountered any of its buttons being accidentally pressed. And if you go to Amazon and look at the negative reviews, being unable to reliably press the buttons is a common occurrence. Quit being a gaslighting asshole.

[@chandlerchhem2128]

counter intuitive. not worth it. just bin the old one a start with the new one and use the old one as parts.

[@ashtradam]

Then I wouldn't have new parts to repair the used one. I can change out the old bezel with a new one etc. Besides the old one was in the original video. It was worth it for me... Thanks for watching

[@joeruiz6133]

Que..?

[@ashtradam]

I'm not sure what you're asking

[@LeChristEstRoi]

That recessed button is barely functional and probably unusable for guys with big fingers! I'm a guy with thin but strong fingers, so it doesn't matter that much to me, I got used to it, and still love my watch, but if your life depends on the responsiveness of this button get another watch! Seriously! BTW, when I received my watch I thought that this weird hard to push recessed button was a manufacturing defect, was pissed and was about to get a refund!

[@ashtradam]

Hi Christus, I get lots comments on this. Some people like it recessed and think it's a "feature" others like myself find that it makes the watch less useful. The watch is so much easier to use now that I replaced the adjust button. Setting timers are a breeze and no issues with water resistance. Thanks for watching

[@MayTheSchwartzBeWithYou]

I have thin fingers but ended up returning the 5600 because I couldn't actuate the adjust button. I thought about buying the button or even a second watch to use for parts but didn't want to waste the time and money to repair a watch that was poorly designed to begin with.

[@LeChristEstRoi]

@@MayTheSchwartzBeWithYou Now I master that recessed button like a champ! Everytime I get it. But I do think that this button won't be responsive enough and easy to use for someone who'd need to use it regularly, it would be somewhat tiring.