Casita RV Sewer Hose Storage by RV Adventures

7 - This video is about building a sewer hose storage compartment on the back bumper of our Casita travel trailer. Join me from start to finish to see how you could make your own.
********************************************************
Please subscribe to our channel to be notified when we post more adventures.
*********************************************************
Follow us at the following sites:
/ rv.adventures
/ mimi.rvadventures
rvadventurestv.blogspot.com
/ rvadventures.me
********************************************************
Support RV Adventures channel by shopping on Amazon using our
affiliate link: amzn.to/2uYpJPx Thank you for
shopping on Amazon through our link. There is no cost
to you to use our link.
Visit our website for a list of products we use with our
RV or that we recommend at rvadventurestv.blogspot.com Using our Amazon affiliate link costs you zero but sends a small referral commission to us when you purchase an item within 24 hours of clicking our link. If you don't purchase items in your Amazon cart within 24 hours, just click our link again and then go to your cart so we can receive a referral commission to help support our production of these videos for your enjoyment. Thank you.
Shop for anything on Amazon using this link: amzn.to/2uYpJPx
********************************************************
Gear used in this video:
Canon Powershot SX60 - amzn.to/2S6d6vV (newer model below)
***Replaced by the SX70 - amzn.to/31M7nA0
Rode VideoMic - amzn.to/2NRxttt
SanDisk Extreme SD card - amzn.to/2q5cJ8e
Canon NB10L Battery - amzn.to/2S6bCBN
Joby Gorilla Pod - amzn.to/2PMgQku
GoPro Hero - amzn.to/2PXD1HU
********************************************************
Music: "The Art of Cool" by Jeff Kaale on SoundCloud
********************************************************
#Casita #RVadventures #SewerHose #RVmodification #RVsewerhose #TravelTrailer

[@RVAdventuresTV]

Our website has moved: find more info about us and links to all of our recommended Amazon items at rvadventurestv.blogspot.com/ Shop all of Amazon, not just RV items at amzn.to/2uYpJPx

[@AF5UdxQSO]

Looks good & matches trailer.

[@geraldsims3137]

Thank you. I had the same delima,

[@johngriffin3962]

Great information!!!

[@bobshobbiesandcamping5614]

Great video

[@RVAdventuresTV]

Thanks!

[@TomMack530]

Kool Nice job

[@johncampini348]

I know it’s a three year old video but that you for the idea I have to modify it a little to fit under the trailer as I don’t have a rear bumper (toy hauler) but I think with the info you put out I’ll be just fine thanks again

[@RVAdventuresTV]

Yes, the idea can be adapted to most any place. Thanks.

[@journeysbegun]

Awesome job showing us how to do it from scratch!! I have to add, no other KZbinr I've seen online can explain things like you do. Keep up the good work! And what a great idea! A perfect place to store that pipe. I am just back from visiting the Casita Travel Trailer place in Rice,TX today and checking out the models. These videos help immensely. Please keep them coming. Thanks a bunch!

[@RVAdventuresTV]

I appreciate that!

[@drs3055]

Thanks Allen! I added your sewer hose storage! We are excited about this. Creating more storage on Casita is awesome. All credit goes to you now and those I share with in future.

[@JustMe-ki3ce]

I just bought my Casita 17’ FD last week used it’s a 2013. I am preparing to retire and full time live in mine after my son graduates High School and starts his life in the World. I have been very overwhelmed until I found you & your videos...thank you so much! Thanks to finding you I now have a list of pending projects that need to be done. You ROCK!

[@RVAdventuresTV]

Hello... thanks for watching our videos. Glad to have you in our great community of viewers. Have fun!

[@RVAdventuresTV]

Hello... thanks for watching our videos. Glad to have you in our great community of viewers. Have fun!

[@sallihernandezfisher4121]

I also just purchased the 2013 FDeluxe. Love this modification!

[@jimmyers8894]

We recently bought a new camper not a Casita but another brand. Unfortunately we encountered the exact same problem with our bumper being to small for our old Rhino Flex sewer hose. All of the options as to what to use and where to mount it just would not work because of space restraints or ground clearance. I think there are thousands out there with the same problem. I am grateful to you for your video with the detail you give. You have solved my problem. Thank you for such a great video.

[@RVAdventuresTV]

Great... glad to hear this will help out... thanks for watching and safe travels!

[@bobshobbiesandcamping5614]

I like the Southern Pacific sign on your wall in the background.

[@stepheng1138]

Drill a couple of holes in the end cap for air circulation and keeps hose dry. Place the holes as close to the bottom as possible for rain drainage. Hope that helps.

[@OPSteel97]

Good idea, but better yet, drill a few holes underneath rather than the end caps for easier drainage.

[@williamhager1872]

Great idea and a perfect installation! Thank you for making this video.

[@annmaes7550]

That’s awesome! Thanks for posting!!

[@kennethmorris1564]

GREAT presentation - thanks. I deviated for holding the end caps on by simply drilling a 1/4 inch hole through both the post and end cap, then just drop a 1/4 X 6 inch bolt through both. Done. I have been using this method with my bumper rubber caps for 20 years.

[@RVAdventuresTV]

Great idea and sounds much simpler.

[@laurabailey9625]

You described this project so well. Very well laid out and helpful! Thank you!! 😉

[@SpeakeasyThoughts]

One of the better tutorials I’ve seen. Thank you!

[@dn1969]

Good idea...thank you for sharing!

[@markeast9221]

You are great and having too much fun !

[@chillbilly2517]

What a great presentation. Short, sweet, packed full of knowledge. Love watching a man work :)

[@dougm1985]

i'm kind of doing the same thing except , i'm mounting it under the camper. i've been looking for a way to secure the end caps , i think i will steal your idea. i painted my fence post black, looks much better.

[@RoseOriginals]

Your videos are going to be invaluable to me when we get our very own Casita. We're flying out to Texas on Thursday to decide on a model (we're leaning towards a Liberty) and put in our down payment. Thank you and keep the videos coming!

[@RVAdventuresTV]

Good luck!! I know you will love your new Casita when you take delivery. Happy camping.

[@pattyhannam2986]

Great job young Man!

[@bertadelaudebri7179]

Thanks for sharing with us all...

[@donnadoll9443]

Brilliant!! Thanks for sharing!! Be safe, Be blessed. 😉😀👍❤🇺🇸💙

[@RVAdventuresTV]

Donna, glad you enjoyed this one. Maybe it gives some ideas to the RV Adventures community.

[@KVAL83]

That is freaking AWESOME sir!!!

[@RVAdventuresTV]

Thank you.

[@elizabethhall8254]

Fantastic just what I need

[@debbietaylor8091]

Great video!!. Thanks

[@campusa8742]

Thank you for this video. I will be doing this modification when I get my Casita.

[@RVAdventuresTV]

Your welcome... glad that it helped you out. Thanks for watching.

[@joanngoodin4625]

Thank you for sharing this! My husband and I just added this modification to our motorhome today! Fabulous!

[@RVAdventuresTV]

Great!

[@shorteelan]

Thanks for the tutorial! I’ll be doing this to my 1978 Toyota Dolphin 🐬!

[@RVAdventuresTV]

Great, I am glad you got some ideas from the video.

[@paulray8802]

Well done! Thanks

[@stopbeingstupid8208]

Great video! Well done!

[@patsycampbell2889]

Fantastic idea!!! Thank you.

[@RVAdventuresTV]

Glad you liked it!

[@ICU8-12]

Excellent video. You did an excellent job explaining how to do the modification. Thank you.

[@RVAdventuresTV]

I appreciate the comment and thank you for watching.

[@TheDonzdonz]

You sir are a genius! You solved a problem we were having! Thank you!

[@RVAdventuresTV]

I appreciate your watching. Glad the video helped.

[@ups3357]

Great idea, thanks for sharing!

[@RVAdventuresTV]

You are so welcome!

[@flanneryd]

I really appreciate the very detailed instructions AND the explanation of the specific parts used. Bravo and Thank You!

[@RVAdventuresTV]

Thanks for watching... hope it helps some out there facing the same issues.

[@tedfisk1211]

This is a really good project. I might try this.

[@alec4672]

This is really genius actually I love finding a good use for a material that wasn't it's intended purpose

[@Lauralietx]

Great Job showing how to do it!! Looks Great!!

[@RVAdventuresTV]

Thank you so much 🤗

[@janetbrowning9089]

I loved how you explained everything so clearly and such a great idea too!! I love how you made it all work so efficiently...great idea too! I so wish more KZbinrs would explain things like you do, without needless talking...you just said what needed to be said and made it perfectly clear though all the steps...thank so much and also thank you for your precious time making this video and posting it here.😊🚐

[@RVAdventuresTV]

Thank you for all you comments.

[@eileenmoore7725]

Thank you for sharing.

[@Alexjj26]

Thank you for this wonderful video. You've given me great ideas to work with! Really appreciate your time!

[@RVAdventuresTV]

Alex Johnson-Jimenez Thanks for the comment.

[@RVAdventuresTV]

Alex Johnson-Jimenez Thank you for watching... I am glad you guys enjoyed it.

[@RickMartinYouTube]

Keep these Casita vids coming.....Casita owner here since '14. Have the same story about the Rhino.

[@RVAdventuresTV]

Rick Martin will do... I appreciate your comments. Thanks

[@angellastragarcia4018]

Well done congrats

[@alive-awake]

Wow, you're talented! And, it looks really professional too!

[@RVAdventuresTV]

Thanks a bunch.

[@CampingFamily]

Great demo and install. Thought I would drop a comment and share I did this on our motorhome last year following your ideas.

[@RVAdventuresTV]

Awesome, thank you!

[@4321grp]

Excellent! thx

[@a.swifty1081]

I just bought an 2013 SD Deluxe from my cousin. I had an idea to put "something" on the bumper, and you showed me just how it could be done. Thanks so much.

[@RVAdventuresTV]

Glad you found something. Thanks for watching.

[@sheltermutts4185]

Bravo! I have the same problem and this gave me some great ideas on how to fix it! Well done! Thank you.

[@RVAdventuresTV]

Great to hear!

[@tayninh69]

Nice mod and nice presentation on how to install, it. It's been quite a while since I have seen a corded drill motor.

[@RVAdventuresTV]

Thanks 👍

[@gilbertchcs]

Just ordered my Casita Spirit Deluxe. Definitely adding this great mod to the “mod list”. Thank you so much!!!

[@RVAdventuresTV]

You are so welcome! You'll love your new Casita.

[@RVAdventuresTV]

You are so welcome! You'll love your new Casita.

[@catdetective9049]

Well done.

[@jillkellam2496]

You are my hero today! Saw something similar to this project, but I didn’t like how he attached the fence post to the bumper. Or how he attached the caps. You provided the solution and I will be getting my supplies!!! Thank you, Thank you!!!

[@RVAdventuresTV]

Glad you liked it! Thanks.

[@Ahmad-yw5hl]

Man you are amazing

[@pappydc12]

Nicely done! I'm new to the RV world and have been managing that sewer hose a couple of different ways - none as clean and neat as this! Found out early on that the hose fitting would not fit in the rear bumper storage on our Keystone Passport 23RB. Subscribed!

[@RVAdventuresTV]

Thanks for watching... glad to share our mods so others may get some ideas... we are always looking to improve & simplify.

[@daisymaxable]

How awsome, I need this....lol 👍

[@noras.5355]

Awesome mod!!

[@MikeAndNary]

Love it.. Going to do this project next weekend. The only modification that I would make would be drill a few drain holes in the bottom.

[@RVAdventuresTV]

Great idea

[@quantumfixits7574]

Nice fabrication sir,,,,think I will implement a similar setup on our Jayco 145RB....

[@WaistGunner7]

Good job. I was planning to do the same thing but mount it to the frame behind the propane tanks. As for storing items in the old bumper - these tend to get very rusty on the inside and will stain anything in side. I put a piece of nylon house gutter inside of mine. You have to trim it to fit, but it will keep most of the rust off.

[@dennym1172]

Very instructive video! I love it! I was looking for options on my Casita. I'm doing the OMW rear hitch for the spare tire and a bike. Not sure if this will work for me. You are very kind to us non Nasa engineers. Thank You! Subscribed!

[@RVAdventuresTV]

D M Thank you for your comments. If I had a carrier set up on the rear bumper like you described, I would maybe move the spare tire up some and put a plastic container like I put on the bumper on the top of the bumper instead of on the rear. Hope you can make it work. You could also mount one behind the propane bottles like I showed in the video.

[@PidasianHippie]

Great upgrade. You did a fantastic job of explaining this step by step. Presently I have my Rhino hose in a big plastic tote that I have to carry in the back of my truck. This would be a much better method of storing it.

[@sandiebock8035]

I would say you need to drill some AIR holes in each end cap so that the water dries out in hose.

[@PidasianHippie]

Good suggestion.

[@mcombsemail]

I would definitely put "No Step" stickers on.

[@RVAdventuresTV]

good idea. Thanks

[@stuartstuart866]

Great video. I think I’ll do the same thing, but mount the fence post to the bumper using steel straps. I love the idea of storing the awning tools in the bumper. I saw in another video that you added little shelves or storage bins inside the Casita for phone charging etc, that would be neat to hear how you mounted them. I’d like to use suction cups or some other non permanent mountains system so I can have flexibility as our needs change and not damage the fiberglass. Maybe double sided tape would be the best solution?

[@RVAdventuresTV]

Stuart Stuart The little bins under the overheads on each side as well as the rectangular one on the wall under the thermostat were purchased online from Little House Customs. They came with double sided tape. The other items we have on that wall were Wal-Mart items and again double sided tape. We also use command hooks elsewhere. Thanks for the comments and questions. Have a great day.

[@mjmcmurray60]

Thanks for the terrific diy video. I got my hose carrier finished yesterday. Mounted it behind lpg tanks as I’m putting a cargo carrier on rear.

[@RVAdventuresTV]

Great... which brand/model of cargo carrier are you selecting and how attaching?

[@mjmcmurray60]

RV Adventures It’s a Geardeck by lets go aero. Plan on attaching to bumper hitch after going to welding shop. This carrier was on my 2016 Mircolite 19fd that I purchased from a fellow that only had it for 3 months. I know first hand what happens if bumper isn’t reinforced.

[@mjmcmurray60]

S

[@ArgueWithATree18]

Great Mod!

[@RVAdventuresTV]

Thanks, this video has received a lot of comments. I appreciate your watching.

[@walterrusty65]

Thanks

[@mrfrontranger7911]

Great mod

[@margaretcrowl5943]

We just ordered a ‘21 casita. Don;t know if we will need this modification for our sewer hose but it would be useful for other things too. Thanks for the clear step by step instructions.

[@RVAdventuresTV]

I know you will enjoy your Casita. The modification works good for us because we have limited space in out tow vehicle.

[@jeffp9889]

I'd add a clip at the peak of the cap so the bungee does no slip off the end and loose the cap! also when you un-clip the end of bungee the cap stays with the bungee and does not get misplaced. Maybe paint it black to make it look like a bumper.

[@RVAdventuresTV]

Thanks for the good ideas. Thank you for the comment.

[@lizchilders4154]

Very nice! Looks great too! Great instructions too. Thanks so much! Any trouble putting your little rubber door on the original bumper with the white one right next to it?

[@RVAdventuresTV]

No trouble at all. The black rubber door mostly fits inside of the original bumper with very little on the sides. Thanks for the comments.

[@bertadelaudebri7179]

Thank you so much, l do intend to do the same.

[@RVAdventuresTV]

You won't regret doing this one. It has made handling the hose much easier.

[@jmrichsonsr]

👍👍👍

[@tomgeary1129]

Great video. Interested in how your spare tire is mounted. On our Casita ours sits on the bumper so would not be able to mount a 5 inch post with the bottom flush with the bumper. Thanks.

[@RVAdventuresTV]

It sits on the bumper. The 5" does sit above the bumper a little so I have a 2 x 4 sitting on top of the bumper for the tire to rest on.

[@anniebuke5489]

great information, will be doing mine this week. :O)

[@RVAdventuresTV]

Good luck! Thanks for the comment.

[@pamil1923]

Good video Sir!, but... I wouldn’t trust that chintzy little bungee cord and now what happens if somebody taps your bumper or you back into something? Sproing! I think it would be better to put both up in the front.

[@RVAdventuresTV]

Good point!

[@jasperspeckles]

Thanks for the wonderful instructions. How did you manage to bolt the front tube on? Does the bolt go right through the trailer frame?

[@RVAdventuresTV]

Yes the bolt goes through the frame.

[@cdlady54_95]

Good job. May .I ask what that knocking sound is? Hopefully another great video on updates. Thank you.

[@RVAdventuresTV]

Marengo, the sound was a roof being re-shingled down the street!!!!

[@drs3055]

Are still happy with what you have done in adding sewer storage to back bumper? Any changes or suggestions? Love how you do things! Thanks

[@RVAdventuresTV]

Yes, happy with that mod. It makes hose storage easy.

[@drs3055]

Thank you for responding. I am going to add to my Casita. I am thinking of only adding 6” and not 10” to the the 58” bumper storage. Do you see that being a problem? Also, did you center the the holes you drilled in the sleeve that connect to metal bumper or move them higher? Thank you Allen.

[@MyWayofEverything]

I maybe would have mounted it underneath the bumper Incase I ever get rear ended. That fence post won’t stand much force so if it was underneath at least the actual bumper would be there to help take the force.

[@RVAdventuresTV]

I didn't do that because of ground clearance... I was afraid that in and out of drives it could drag and be torn off.

[@julieh3327]

Thanks for sharing this modification. How is this holding up?

[@RVAdventuresTV]

Your welcome. It is working great.

[@edadpops1709]

Awesome vid would you put links to the rino hose and attachments up so we can purchase thru your affiliate store thanks

[@RVAdventuresTV]

Yes, they are on the page at rvadventures.me/products-gear/ Thank you for using the Amazon affiliate link.

[@OPSteel97]

Love this mod, but now that it’s been a few years….have you had clearance issues at all? Have you had to remove the spare tire with it on?

[@RVAdventuresTV]

I haven't had any clearance issues. Yes, I have removed the spare tire as part of my annual tire rotation and it was not any problem. Thanks for asking.

[@allan6021]

I’ve never seen anyone install it on the rear face of the bumper. Interesting. I would consider an eyelet on the end caps and crimp one end of the bungee so it doesn’t come off. You can also use a piece of symmetrical gutter as a tray inside the fence post to make it easier to retrieve the sewer hose. The gutter can also serve as a hose support.

[@RVAdventuresTV]

I did have an eyelet on the caps of the ones on the front. Over time, they cracked where they were drilled so I went back to just a cap. In the metal bumper, I did add a cut piece of 4" pvc for my awning support and crank. I tried that in the sewer hose storage and found that for me, it was just extra since the hose goes in and out easily. Thanks for you comments.

[@Texas_Knights]

I have used this mod for over a year now, exactly as you instructed. On our last trip, I lost the sewer pipe and fittings, as the end cap slipped down far enough for everything to slide out. The bungee cord had weakened just enough to allow the end cap to slip down. Amazingly, I still had the end cap, it was just too low to hold the pipe in. Have you any suggestions for an alternate means of securing the end caps?

[@RVAdventuresTV]

Yes. You can drill a hole in the cap close to the side near the tube and then drill a hole through the end cap side through it and the tube lining it up with the one drilled on the end. Then place a carabiner through the holes. You could also drill a hole on the top of the cap through it and the tube and just drop a bolt through it to lock it in place, make sure your bolt is 2-3" long so it doesn't bounce out.

[@steveisenhower2864]

Can you tell me how long you cut the vinyl tubing/post that you used on the front of your Casita frame? Would you recommend that length for the front? You said you cut the rear tubing to about 68". - Thanks. I am following your model.

[@RVAdventuresTV]

The one in the front is 60" so it doesn't stick out too much on the sides.... I guess for turning clearance to the bumper of the tow vehicle and air resistance.

[@albion2742]

Keep an eye on those rubber bumper caps. I lost two of the original ones then replaced them with the ones that you have to squeeze to get them in the pipe, I lost one of those too.They tend to shrink when the temperature gets extra cold.So make sure they are tight before you lose your awning post.

[@RVAdventuresTV]

Thanks for that info... I will maybe add some hooks to stretch one of those mini bungee cords over it.

[@lisantica842]

What length of hose do you find sufficient at campgrounds? I'm about to buy a Rhino hose, but they come in different sizes.

[@RVAdventuresTV]

I have the 15 foot hose and it works in 98% of all campgrounds... I have the 10 foot extension just in case and I have only had to use it once. Usually you can position your trailer fairly close to the sewer connection but there are times you may want to back it in more or less for shade or convenience to a picnic table, etc.

[@TheTJLH]

I have a 20' hose. I wonder if it would fit with the added inches. Hmm.

[@RVAdventuresTV]

Maybe you could collapse it down and measure it to make sure before undertaking this mod. Thanks for commenting.

[@TheTJLH]

That's what I ended up doing. It doesn't fit entirely, but between the existing bumper and the front mod, it does.

[@PeterHartman1]

So does the 45 actually fit in this as well or do you have to remove that part still?

[@RVAdventuresTV]

Yes... it all fits well with no removal of the fittings.

[@mjmcmurray60]

Thanks for the well done video, got mine ready to mount when the rain lets up.

[@bob-ii8oe]

must remember.... don't drink the black water.. it's not coffee.

[@rustynone2231]

Any one know if a 1984 casita only has one tank on it for grey and black water any help would be appreciated thanks

[@RVAdventuresTV]

I have never heard of an RV not having a black tank that is separate from the gray tank, but anything is possible. I have heard of some RV owners combining the tanks after installing a composting toilet.

[@davelynch2532]

I have a piece of pvc pipe under my trailer and I get 3 sections in it.

[@IvyAndBoAndMe]

Unless that's a new hose I'm grossed out that there aren't any gloves being used while touching it.

[@RVAdventuresTV]

Yes, it was new when I build the holder.

[@fabiana2798]

I was just thinking the same, when he was touching his glasses and bumper.

[@1DirtyMutt]

Do you wear gloves when wipe your azz?

[@don.sullivan]

The incessant sound of nailing (new roof nearby?) kept me from making it all the way through this one.

[@RVAdventuresTV]

3 houses down....

[@RVAdventuresTV]

Support our channel by shopping using our Amazon Affiliate Link: amzn.to/2uYpJPx

[@terryhennessy3068]

HATE TO TELL YOU THIS, BUT HOSE DOES FIT IN SQUARE BUMPER: 1) Remove FITTINGS from the hose 2) iNSTALL CAP/PLUG in end of hose that you wish to insert first; 3) (on the hose end, there are four little plastic SPLINES); Line these up with the 4-CORNERS of the SQUARE bumper, and Insert ; 4) Push hose into bumper, collapsing it as you go, 5) when fully inserted/ collapsed, install the other cap/ plug on the end of the hose; 6) Insert last end of hose, and install/ close bumper cap. 7) Bag and store fittings elsewhere

[@RVAdventuresTV]

Correct... but with fittings, no fit. That is why I built the bigger storage bumper so I would not have to take off the fittings. Thanks.

[@jasongovols1060]

Yes mine fits also but I do not have to remove the fitting. I have the sane ryno hose. The bumper is 4x4 not sure why mine fits and his doesn't

[@rshoffitshoffit3522]

What did you use to raise the tire up that was sitting on the original square tube. How much did you have to raise the tire. I have built the TUBE. Which hole in the rim did you use.

[@Texas_Knights]

@@rshoffitshoffit3522 I made this exact same mod, exactly as he shows here. I simply put the spare tire bolt through one of the lug nut holes to raise the tire. You have to tighten it good so it doesn't shift, but it works.