CAT C-15 6nz 475hp, loud 6in straight pipes

[@al-Bismillah]

Fellas, that there is the sweet sound of mechanical love making!

[@jermainemorgan171]

Cat engines are the best. Cat need to come back in the semi trucks application.

[@FECosta-ei6pv]

Cat should to do a partnership with a new truck company (maybe the Traton Group from Europe) and so come back to make trucks engines in North America.

[@thomashalley7258]

They don't want to deal with the emissions bs for over the road from my understanding.

[@jaredpaskel5586]

Cat won't make truck engines anymore to much bs to deal with

[@davebullock3517]

Running DEF in their construction equipment now, so they are into it now anyway

[@thomashalley7258]

@@davebullock3517 doubt they make enough on a engine to manufacture over a whole tractor they build.

[@darrellyoder2602]

Thank you for actually DRIVING your truck! A lot of these truckers take 5sec between shifts.

[@tylerwinslow4170]

Deep throat sound. Great truck. The Cats were at 475 most likely pulling at about 520 hp.

[@jhaack79]

Man that turbo whistle is sick

[@causticdeagle]

Love the way she sounds man, you're a smooth operator, godspeed trucker

[@JacksonGuitarsPlayer03]

Got 7inch pipes on both the trucks I drive. 7 inch straights on the 2001 W9, and 7 inch curved at the top on the 05 W900L. Bought some real badass stacks for both of them. I think I like the sound of the straight stacks (ones like yours) the best.

[@mdanas0007]

I can hear this melody❤ all day long.

[@ConstructionMachineryChannel]

Sounds great! There are electric excavators coming out that are almost completely quiet. It's just not the same without the sounds.

[@Grtruckingdemolitionllc]

Dang had not heard of that

[@kizerbread]

Gotta love that torque too, watching the driver side torque up under load and listening to her talk. Oohhh yea. Love when those super semis lift a tire off the ground with all that torque!

[@DougTreffer]

Love the sound of straight pipes

[@deverickburrows6500]

love the sound of a cat when it purrs keep those wheels turnin brother subscriber from the bahamas

[@Raptor-700R]

Ohhhh the sound of that truck is sooo sweet...like a cat purring lol

[@dinho890i]

Damn your rig sounds so sick man. Subscriber from Mozambique👌

[@brodyhadlock5367]

Reminds me of my dads old log truck, I’m a truck lover so I drool over cats, the new motors don’t sound cool sadly, she sounds goooooooodddddd

[@kevinthomas2906]

Imagine being the lucky person who drives this rig everyday.

[@anthonyschneider8331]

Music to my ears nothing but Cat

[@rickychisolm1376]

Old cat & Jake's sounds good turbo whistling

[@crazymixture57]

The only other engine that I love besides the Mack Maxidyne is the sweet sweet sound of a CAT engine!

[@BigCool95]

Right there with ya! I love my macks, but id take a peterbilt with a cat engine any day

[@matthewnecessary3788]

Ain't nothin like a caterpillar engine

[@nostalgia_co]

scania v8

[@willtruckjohnson]

V8 mack 525

[@nostalgia_co]

Detroit diesel 60 series

[@alpzepta]

Detroit 2 Stroke Diesel (71 and 92 Series)

[@markedwards9874]

Fair shout . E9 mack was a joint Collab with Scania bottom is Scania top are macks . I do love cat but an E9 ratting on is summut else 💪​@@willtruckjohnson

[@braydenmacausland5275]

Hey brother I’m from summerside pei absolutely love your content and love the truck!

[@moctezumaRevenge]

I just bought a 97 Peterbilt 379 exhd from a old boss for 10k looking to have it ready in about 6 months has 3406 with 13 speed

[@RyanWilson876]

3406❤️!

[@sergeantspeed5941]

Damn how'd you get it so cheap?

[@moctezumaRevenge]

@@sergeantspeed5941 from a boss she retired and she treated me like a son so she gave me a great deal

[@redline350zHR]

@@moctezumaRevenge dude that is fucking awesome....cant wait to see it if you end up posting it 💪💪

[@moctezumaRevenge]

@@redline350zHR I got it ready just have steel rims all around cause it has the old style bud rims and I bought hub pilot for all axles going to put it to work for about 2 or 3 months and buy some aluminum rims, but they are so expensive 😂.

[@Jester_KillzEm]

I love the 3408 with 8” stacks!!

[@isaakwilson2727]

I could fall asleep to this 🤤

[@WettestGiant]

Love it! She sounds amazing!!

[@danovanlloyd5061]

Music to my ears 😊

[@roswell8875]

At here 5:00 best Sound. Love it from deep Rpm slowly to high rpm......

[@ridhobaihaqi144]

Just my opinion. CAT engine has the biggest torque at the same RPM. That's why i love CAT, even only in simulator game.

[@JacksonGuitarsPlayer03]

Nice camera view

[@calsmith7902]

Like the sweet smell of Napalm in the Morning! ☺😃😀

[@andrewallen6114]

still sounds good brother still sounds good I'm not dissing I'm not disrespecting whenever we play around with the big yellow motors we're not messing around

[@ffaandchevrolet8294]

All I hear is bald eagles screaming out them stacks

[@rasidsmajlovic3127]

Siiiiick

[@elvisbest3213]

some modder in American Truck Sims need to get this exact sound for the default game

[@rblythin]

@Elvis Best: one already exists. Zeemods has recently released an excellent quality sound pack recorded off a Kenworth w900 with a 500 hp 6nz. It's on the zeemods store website

[@elvisbest3213]

@@rblythin yes I got both of them only issue is I wish the Jake wasn't so strong but amazing sound

[@nestorcendejas620]

The truck sounds nice compa gerardo

[@Nays33]

Straight pipes for 475HP? Pump the big 600 you know she can take it 💪

[@Grtruckingdemolitionllc]

Getting tuned to 550hp in a few days. And later on upgrading turbo etc and will flash to 620hp tune

[@felipebaccelli3462]

Esse é um dos melhores son's do mundo!

[@andrewallen6114]

She sounds good even my wife says sounds better than a Pontiac v8

[@stevelaming3091]

Sweet

[@DarioDelis]

Caterpillar power🔥🦾🦾

[@KLNYC]

Love it....Is this from a GoPro Hero 8? Best video in YT yet :). Question what if rain?? water get into the pipe??

[@Grtruckingdemolitionllc]

It’s the go pro hero 7 I do have the 8 but said if the go pro falls and ran over it prefer to be the older one 🤣. And nothing it leaks from the bottom we’re the clamp goes. And next time I start the truck any left water comes out

[@KLNYC]

@@Grtruckingdemolitionllc oh you mean there another flap inside the pipe? i would to see it haha. It baffles me . thx bro and have a safe week ahead. God bless you

[@Grtruckingdemolitionllc]

@@KLNYC no it’s just a clamp that joins the pipes towards the bottom we’re it curves.

[@redline350zHR]

@@KLNYC he is saying there is NO FLAP inside these pipes...the rain will go to the bottom (where the stacks curve to go towards the Engine) and it will leak out where the clamp for the 90degree angled part of the pipe goes.

[@evanjordan5075]

6nz sounding good and can tell you made a run up to Splendora and are headed back to H-town?

[@Grtruckingdemolitionllc]

I do this run every week maybe 4/6 runs to splendora

[@evanjordan5075]

@@Grtruckingdemolitionllc Does that allow you to have enough material to sell up there making 4 to 6 runs up there?

[@thanandornklakasikarn7240]

I love sound. 💗💗💗💗

[@CesarHernandez-ji1je]

Excelente video bendiciones sigue así 😎 Saludos desde El Salvador.!!!!!!

[@Street_Tractor59]

Need a heavy haul file flashed in it. Idk if your clutch and 10 speed would approve though lol.

[@Grtruckingdemolitionllc]

All that has to be upgraded then a flash

[@actionfire4036]

Nice truck good buddy!

[@Grtruckingdemolitionllc]

Thank you man

[@actionfire4036]

@@Grtruckingdemolitionllc you are so welcome!! It just sounds so good! 😄😄

[@actionfire4036]

If I had to choose an engine it would either have to be a Volvo D13 or a cat C15

[@BensDieselServices]

How loud is it in the cab, thinking out 6 inch pipes on our 01 w900b with the 6nz c15, but don't want it unbearable in the cab

[@Grtruckingdemolitionllc]

Not that bad, 7/8in are way louder more drone

[@BensDieselServices]

@@Grtruckingdemolitionllc alright thanks man 👍

[@seanmesaehable]

any plans to turn up the power!!!

[@Grtruckingdemolitionllc]

Yes in the future

[@perfectdipper144]

Hey grtruckingdemolition

[@SM120THBORE]

How do you make your turbo do that in between shifts? Lol I’m a a diesel mechanic and my Western Star 4800 6nz, stage 1 turbo from borg warner, straight pipe 5 inch to 7 inch stacks won’t do that sound in between shifts

[@Grtruckingdemolitionllc]

I have never touched the motor on the truck, I’m going with 8in stacks in December can’t wait to redo this video with the bigger pipes.

[@pjstempel6094]

Wastegate

[@FlexZone100]

No way your a mechanic

[@stevenfr3686]

Nice sound 😍😍👌

[@Jester_KillzEm]

Do you like the 6nz over the ACERT? I definitely do

[@Grtruckingdemolitionllc]

Have not owned a acert but do love my 6nz

[@Jester_KillzEm]

@@Grtruckingdemolitionllc less headaches pretty much 😂

[@k.t.c.t.c.4104]

Hey dude why not look into getting some injectors for boost🔥🔥💨💨

[@Grtruckingdemolitionllc]

Later on for sure

[@k.t.c.t.c.4104]

@@Grtruckingdemolitionllc then the coal will roll bad ass 🔥🔥💨💨

[@andrewallen6114]

Okay so you have the kitty cat 3406 I had the 05379 with a twin turbo C15 kitty cat and she was up and she was a monster fully grow fully grossed 80,000 lb climbing a 6% grade at 75 miles an hour

[@Grtruckingdemolitionllc]

Nice man, eventually I will start to mod the engine, want to do a 18 speed/ open injectors/ tune/ bigger turbo/ 410 rears. Etc..

[@andrewcavazos5095]

Bad ass bro!!!

[@armandocampos857]

Aye bro how much was this truck? Would like one but in a day cab.

[@Grtruckingdemolitionllc]

This one was 24k

[@RaysDuran]

🤙🏻🤙🏻🤙🏻

[@gearjammer89]

Do you like the 10 speed over an 18? What rear ended gear are you running?

[@Grtruckingdemolitionllc]

I really need a 18 speed I feel like the truck just wants more gears when im on 10th, 9.76 I think don’t remember

[@brandonhughes3491]

Gotye - Greatest Hits - Cd 01. Out Here In The Cold 02. The Only Thing I Know 03. Hearts A Mess 04. Making Mirrors 05. Easy Way Out 06. Somebody That I Used To Know 07. 26 08. Drama Queen - Feat Train 09. Good For You 10. Noir Excursion

[@tywinters9462]

Are you 6 inch straight off the turbo to 6 inch exhaust ? Or 5 to 6?

[@Grtruckingdemolitionllc]

5 to 6

[@octaviocortes3374]

Htown 🤘🏽

[@nostalgia_co]

that sounds almost as good as a scania v8

[@Grtruckingdemolitionllc]

I think our inline 6 trucks sound better, I was looking at some videos of the Scania trucks earlier not bad at all, they soon pretty good. Not a fan of that style of truck thou they don’t look to nice

[@Mark_Tschetter]

Scania trucks are just square blocks with paint. But they do have a V8.

[@markedwards9874]

Sounds better mate had 560s over ere in UK great pulling machines but a bit of pussy power nowt comes close .in my humble opinion of course 👍👍

[@philliptorres3725]

What’s that Song name in the intro???

[@damienboss20]

Truck Name?

[@charlesferebee263]

You need to get your computer flashed to a 475 heavy haul code. Just Saying. Stay SAFE

[@adelinodagostin3236]

Wow....

[@emialber17]

llegue tarde pero aqui tamos

[@astinc8870]

I have a C15 can someone tell me how to turn on multi torque

[@warleigomes286]

Isso é uma sinfonia

[@pabloochoa385]

Theres nothing better then Cummins

[@Unexpectedperspectivesnow]

Check out Volvos old FH16 engine ;))))

[@markedwards9874]

Love a straight piped Volvo . Very similar to Cummins sound

[@emialber17]

saludos bro

[@ledzeppist]

Be a whole lot better if you'd quit short shifting the damned thing. Let the Cat purr, man. Put the hammer down, jeeze.

[@redline350zHR]

Wait have you seen this video??? Guy revs the fuck outta this Cat. Company here in NY based in Hollis, not far from where i live on long island

[@ledzeppist]

@@redline350zHR - Think we're talking about 2 different videos. For one, he's not revving the fuck out of anything, and this dude is out of Houston. He has probably never even been to Long Island. He owns a local demolition company, here in Houston.

[@redline350zHR]

@@ledzeppist relax you must think i was writing what i wrote in a way that i was coming AT you?? Bc all i was commenting to do is to AGREE with your comment AND show you a link to a video where the driver WAS revving the engine out from a company here in NY. You took everything i said the wrong way..

[@redline350zHR]

kzbin.info/www/bejne/hJKYgWR_h6uWoc0 - Here is the vid i wanted to show you. I think youll enjoy it 💪🏼

[@redline350zHR]

Sorry my link i wanted to show you never posted the first time before you just responded, so Yes, it did look like i was responding to you as if i was disagreeing with you or questioning what you meant....but that wasnt the case - i was actually WRITING my comment in an “exciting” & ‘agreeing’ way bc i wanted to show you the video of this guy recording a louddd straight piped c15

[@emialber17]

tu camion suena rico

[@jacobrife7694]

Cats sound good but Detroits sound better

[@gostek5622]

Jake brake

[@cosmins.5105]

first

[@ronyoung6054]

F up music, stopped watching as soon as it started

[@ronyoung6054]

But a thumbs up for your good Intentions 👍