Voice chat in the age of modems

[@hobbified]

So, I read the V.61 spec and you got it pretty much spot-on. It's hybrid analog, with a modulation that looks like it's a slightly faster V.32bis (either 2800 or 3000 symbols/sec, compared to V.32b's 1800). When you're not using the voice feature, it's supposed to be able to use most of that capacity to give you a 19.2kbps data connection (though I wouldn't be surprised if something made it effectively 14.4 for you). When you turn on the voice mode, it keeps the same symbol rate but it downshifts from QAM256 (8 bits per symbol, 19200 usable bps) to QAM4 (2 bits per symbol, 4800 usable bps). This leaves so much "extra space" in the constellation that the modem can add a (filtered, processed, and decreased in amplitude) version of your voice to the signal and the other modem will still be able to decode all of the data bits. After it does that, the receiving modem subtracts the value corresponding to the data bit from the signal, and what's left is the processed voice signal. So it undoes that processing, and some slightly crunchy voice comes out of the speaker. 19,200bps (data-only) / 4800bps (voice+data mode) only requires 2400 symbols/sec, but I said there were either 2800 or 3000, so where do the extra ones go? They're used for a data "control channel" between the two modems that always runs at the low rate (800bps) and constantly exchanges information about the line conditions so that the modems can choose the optimal values of the audio processing filter values, and it's also used to switch between the data-only and voice+data modes basically instantly (25ms).

[@hobbified]

I *think* that the reason for offering two different symbol rates (even though they both give you the same data rate) is that the higher symbol rate also allows slightly wider audio filters (better voice quality), but the lower symbol rate is more likely to work if your phone lines are crap. The standard never comes out and says that, though. Oh, and most people pronounce QAM Q-A-M, just like AM or FM.

[@setoth1234]

Thank you for this excellent explainer of how we were able to squeeze data and voice through a narrow pipeline!! Now, my next thought, is how this will all degrade with the switch from analog phone lines to digital VOIP.

[@hobbified]

@@setoth1234 anything that meets the standards that the telcos keep for digital voice (8kHz PCM with minimal jitter and no "advanced" compression -- like a T1, or G.711 over good solid VoIP) will handle this just fine. The long-distance infrastructure was already largely digital in the 90s, so modem designers took account of that kind of thing. Sending it over GSM or AMR or G.729 or Spex or Opus or Silk will murder it, but that's true for basically any modem, it's not specific to SVD.

[@patrickwatkins7572]

Telecommunications Act 1997 (Cth) | ALRC for John Linguis

[@nowaymuller6643]

Why not use ISDN? That what the rich Kids used back then.

[@Ben79k]

Yelling into the phone until the connection dropped not only made me laugh out loud but also reminded me of that video where a guy screams at a bunch of hard drives in a datacenter and the performance drops noticably. Thanks for the lesson on technology i never got a chance to use

[@Nuskrad]

i found whistling loudly down the phone was the quickest way to get the modem to drop the call. came in useful when my sister was hogging the family computer and i wanted to use it :D

[@jessestrobel2]

lol I watch that video all the time lmao

[@DrewWalton]

IIRC there was also a particular model of hard drive that would crash if a certain song was played.

[@pdoherty926]

​@@DrewWalton Janet Jackson's Rhythm Nation.

[@noth606]

@@Nuskrad you could have tried to emulate a line reconnect, I had about as much crap as CRD (still have some of it) and I have managed to 'negotiate - connect' handshake with a modem several times using my voice. Yes I know how wasting time on shit like that is pointless, but there was a time in my life when I had a bunch of time and tech junk around to have nothing better to do.

[@tayzonday]

We totally had Roger Wilco 1998! You could use it to voice chat and play a multiplayer game like Starsiege over dialup. It worked like a charm over my 26.4 modem.

[@pjaz6800]

I make my modem hold the call to breathe in

[@1-eye-willy]

CHOCOLATE RAIN!

[@1-eye-willy]

as a fellow baritone, i solute you Tayzonday

[@ZacCrawforth]

Holy crap! I can't believe I FORGOT about Roger Wilco!!!

[@Minigig]

I came here to say that . I think I was even using the beta service in 97 with a friend.

[@devjock]

I appreciate you using the classic Door stuck clip to demonstrate CS 1.6 voice chat.

[@CullenCraft]

DOOR STUCKKKKKK

[@devjock]

@@CullenCraft PLEAASE, I BEG YOU

[@rsluggy6485]

Your laugh at the yelling to disrupt the carrier reminded me... I was a member on a MajorBBS with some number of lines; I forget how many at this particular time. But the sysop had some kind of flow control or disconnect detection issue between the BBS and the modems wherein a line could drop, but the modem would remain connected to the BBS. After a user was dropped, when the next caller would hit the line for that modem, everyone would see that ghosted user sending "RING" "RING" "RING" over and over until the caller gave up. To keep from having to manually jump on the system and disconnect the errant modem, the sysop added an action word to the chat room that would disconnect the user if it saw the word ring on a line by itself. My girlfriend spent significant effort tricking people into typing it and kicking themselves offline.

[@PinkPandaKatie]

Oh my gosh, if it were me, and I knew what was happening, I would have started typing modem commands in chat to see if I could get it to dial out! Or also send ATA to have it answer and the new caller would be logged in to the old user's account...

[@tkteun]

@@PinkPandaKatie Convincing the BBS to send AT commands without having your own modem respond, sounds like the recent log4shell/log4j vulnerability

[@PinkPandaKatie]

@@tkteun Modems don't respond to commands when they're in "data" mode. You have to either use one of the RS-232 side signals to switch to command mode (like DTR. DSR, I forgot which one) or send "+++" without sending CR, then wait until you get a command response. In this case, your modem is in data mode, but the other one is in command mode.

[@tkteun]

@@PinkPandaKatie Thought that was more of a PPP thing than a BBS :)

[@PinkPandaKatie]

@@tkteun Well, the modem doesn't know or care whether you're using PPP or not

[@adriansdigitalbasement]

Hello all! I was a big modem user from the days of a manual dial 300bps modem to the last v.everythimg Courrier, and I recall most of my modems (if not all) used a relay to cut off the attached phone on the passthrough jack. So when I transferred files with friends, we'd just leave the phone off the hook for when the modem hung up, so we could continue chatting by voice. sending 800k Apple IIgs disk images across a 2400bps modem took a very long time... It's possible since I was a heavy modem user for so long I always had somewhat fancy and expensive modems, so it's why this feature was there. I got DSL at the start of 1999 so that was the end of the line for my modem usage.

[@CathodeRayDude]

that's interesting - the 300 baud modems DID cut off the phone jack, i forgot to mention that, but none of the newer ones I've ever used did it.

[@adriansdigitalbasement]

Adding to this, even my original manual 300bps modem cut off the attached phone when you switched it to answer or originate. I'd dial a BBS, wait for the carrier and switch to originate at which point the phone would cut off. To hear the modem carriers you'd need to pick up another phone elsewhere in the house.

[@adriansdigitalbasement]

@@CathodeRayDude The USRobotics Courier v.everything modem has a voice/data physical button on the front panel to even switch between the two modes. I can't recall when I got my Courier but it was the last modem I got because it was a fully firmware upgradable modem that could be flashed to support new standards. IIRC when I got it, it only supported 28.8k but then I upgraded it to 33.6k and then finally 56k at the end. It also supported the proprietary HST protocol which was a USRobotics 14.4k (or was it 19.2k) thing while everyone else was stuck at 9600bps. Some BBS's used HST modems so it was a nice speed boost. The Courier was costly compared to other modems, but it was the bees-knees. I still have an unopened v.everything and the branding on it says "MISSION CRITICAL CONNECTIVITY" in big red lettering. Fun fact: the modems inside all mobiles phones (to this day) use the same AT command set for everything. It's just hidden away by the mobile phone operating system. This command set was standardized by Hayes in their first smart modems. (Or at least I think that's the case with the AT command set.)

[@nickwallette6201]

That was definitely not common -- at least on later models of less-than-Courier-class modems. I had a generic 2400-baud modem that came with the family 386, which we upgraded to a Zoom 28.8, and I later had a US Robotics internal 56K modem. None of those would stop you from picking up a phone attached to the second jack during a data call. I do seem to remember they all (?) had relays, but AFAIK, that was just a disconnect between the phone network and the computer. (Probably to help minimize the likelihood of damage from nastiness on the phone line.) I have quite a collection of modems now. Some day I'll have to look into whether any of them did this. I never knew that was a thing, because none of mine ever did, so it hasn't occurred to me to consider this in more recent years. Interesting.

[@adriansdigitalbasement]

@@CathodeRayDude Another tidbit now I'm thinking about things -- with modems with a relay, when you called a number (with the modem) and someone answered, you couldn't just pick up and talk to them. So, with the hayes protocol, simply pushing any key on the keyboard after issuing a ATD will cause the modem to instantly hang up (or switch back to the attached phone if you a holding the handset off hook.) I'm skimming the Courier HST manual and it works this way, so it had a relay. I still have my old 2400bps modem from 1989 (a Zoom modem) and I just opened it up, and sure enough the two phone jacks are just connected right to each other. So I guess the cost cutting had begun already!?

[@RobBulmahn]

My family used a program/service called CallWave back when we had dial-up. Basically, anyone calling your phone number would get redirected to this voicemail service. Through a program running on your computer, it would alert you to the incoming call, and would let you listen to the message while still online to decide if you wanted to disconnect and call them back.

[@deadtek]

Was trying to remember what that service was - callwave. Thx

[@HorsesArePeople2]

AOL had their own free version of this that we used iirc

[@ZMITCHELL84]

My parents refused to pay for services, so we used K-Mart's Blue Light free dial-up and CallWave. CallWave was a game-changer in my house.

[@ZipplyZane]

Ah. Should have read the comments before mentioning that myself. It worked using the call forwarding feature of your phone line, and you could set that up by dialing a special code before each call, same as you could for disabling call waiting. And the service was free--it just used advertising to support it. The app was always on screen, showing some ads. And I'm not sure, but I think they eventually would play a very short ad on the actual call. You know the kind that just says "Brought to you by . ."

[@delightful-ish]

Grandma had this, but couldn't remember the name!

[@No-mq5lw]

My dad actually ""solved"" the problem of using a phone line for both data and voice in his youth by installing 2 completely different phone lines in the computer room. How he actually convinced his parents to do this I have absolutely no idea.

[@nickwallette6201]

As one of those who was a teenager in the time of dialup, I can assure you that after picking up a phone so many times just to hear the squeal of a modem, eventually it wasn't a hard sell to get a second line.

[@thomasbohl6924]

I still remember my father yelling "Enough is enough! We are getting ISDN!" when he tried to use the telephone while I was online again. :-)

[@frogz]

when the phone line is in use nearly 24/7 with dialup, sometimes people need to make phone calls.... ugh, i remember those days "get off the phone, i need to make a call" x.x

[@misterhat5823]

It was easy for me. I paid for the second phone line.

[@AltoidJTP]

Late 80's I did my fair share of BBSing. Eventually the idea of sharing the line peacefully with a teenager was painful to envision. Best part was it let me operate a BBS since I could accept calls without ringing throughout the house. Good times, indeed.

[@edburke5731]

I used to work for Packard Bell. Their 33.6 (and above) modem/soundcards supported voice view. We even had a radish team to do support for customers that had those mpdems

[@CathodeRayDude]

Packard Bell is the *only* name that seems to come up when I search for this tech, I suspect they leaned into it more than anyone else. I'm really curious if you heard much about people actually using it, and what they used it for?

[@allalphazerobeta8643]

What is a "radish team" ?

[@notarabbit1752]

@@allalphazerobeta8643 Radish is the name of one of the companies making this stuff. Its in the video.

[@jessihawkins9116]

packard bell had those crappy modems that were built into the crappy sound card they had that you could never find drivers for 😒

[@bookshelffury]

@@jessihawkins9116 the ones with an actual yamaha opl chip on em are pretty decent. not all of them were crap lol

[@Kumimono]

I was just lamenting the barren landscape of my KZbin subscriptions. And then this showed up! My day is saved!

[@Saturn2888]

I think I get this now. "I want a faster horse" when in reality it's "I need a second phone line". This is how my parents solved it too. They wanted to be on-call at work because that gave them both mobile phones for free. So they both had Nextel phones, and we used the Walkie talkie feature all the time. This way, I could be left at home safely while online.

[@AnoNym-iv9ig]

We here in Germany (and Europe) had something called ISDN,before DSL hit us in 1997. ISDN was like "digital dial-up" with two lines, both with 64kb/s. So we solved the simultaneously speaking and surfing problem. And we could bundle the lines and have 128kb/s internet speed. Btw, i like your in-depth videos a lot!

[@NielsPaul]

I was looking for that comment. 😉

[@Rosscoff2000]

Same here in the UK. ISDN remained heavily in use for temporary high quality audio links for radio stations and is still around (but disappearing fast).

[@cpm1003]

We had ISDN in the US too. I had it at home from 1998-2000. Before that, I always had a second phone line, all the way back to 1991.

[@lemagreengreen]

Yep, was marketed for the home user in the UK from about 1996 I think but was obviously in use in business for a long time prior to that. It came a little late (for the home) but for a year or two it was about the best home internet connection you could have, I remember it was a huge advantage for Quake players since it was very low latency compared to a modem.

[@the_kombinator]

LOL we had ISDN here too. It was just pretty expensive, what with it needing to multiplex several individual phone lines.

[@xliquidflames]

What a fascinating video. I worked for AOL in 99-01, RadioShack after that and AT&T after that and I had no idea any of this existed. Thanks for all the hard work putting this together.

[@cgungryfcdjs1352]

are you cursed?

[@Butterscott_NJ]

You're my favorite KZbinr. I get so excited every time you post a video because I know it's going to be exactly my niche of "who even cares about this" and you take a deep dive even if you know you're not going to get it 100%. Your presentation is amazing. I knew tons about how modems worked already and still learned something new.

[@therealchayd]

I used to work for an ISP and there was this VHS vs Betamax period where there were two competing 56K standards (K56Flex (Lucent/Rockwell) and X2 (USRobotics)) meaning we had to invest in two types of access switches (banks-o-modems) with two different dial-up numbers, much confusion ensued with users using the wrong number and complaining of slow service, V.90 couldn't've come sooner!

[@queens.dee.223]

I totally forgot about K56Flex! Thank you for the reminder!

[@poofygoof]

ISTR zyxel had their own standard around that time as well. HST and Telebit were still kicking around, too. fun times.

[@ryborg123456]

My USR X2 was firmware updated to V.90 I believe after some time.

[@VeronicaExplains]

As a somewhat pedantic fan of D-sub, I so appreciate the distinction of DE-9 vs "DB-9" at 31:46. Thank you.

[@CathodeRayDude]

i've had people yell at me before for being a prescriptivist about it, and frankly, I see their point. *almost everyone* calls it DB9, and we aren't ordering these out of catalogs - _even some catalogs call it that._ and the distinction is meaningless: did they ever make a "DB" with 9 pins? absolutely not, so who cares if we make that an alias? DB15 is a different story, because they DID make that in both B and E sizes - but nobody really argues that point. honestly, we should probably chill on it, but, I'm not gonna lmao

[@combusean]

Even having grown up around dialing my friends in the early/mid 1990s and seen my share of modems, dialup doom games, and tinkering with AT command sets, all of this SVD stuff is completely new to me. Even voice modems were a relatively rare novelty. I appreciate your nostalgia for all of this stuff, it was an era I don't miss very much at all but I love the historical deep dives.

[@glarynth]

Fantastic story about the era! My solution for simultaneous Doom taunting was to get him to drag his entire PC to my house and use a null modem cable. Good times.

[@SixArmedSweater]

The design of those ASVD units is delightful! They coordinate perfectly with the case designs of the mid-90s, which so many hardware manufacturers ignored, and their form factor brings to mind the desktop intercoms whose functions they replicate! Just stellar work all around. 💕

[@BollingHolt]

When I started calling BBSes in about 1991, I had a 300 baud modem on my CoCo2. You could actually pick up the phone and tell the difference between just the carrier signal and when data was being transmitted. As a fourth grader, all of this blew my mind. Computing was so much fun back then! Great video.

[@setoth1234]

You could also tell who was transmitting at the time. Your modem produced the lower tones, and the higher pitch was the modem on the other end. That, or you could flip between the two carrier tones?

[@unfa00]

Computing is still lots of fun today, it's just very different :)

[@morph-the-cat]

Great video as always. When I first started watching your content I didn’t know your subscriber count, assuming you were in the millions. Your content is top notch and it’s just a matter of time until you grow. Keep doing what you do, and don’t change a thing!

[@dougwagner4902]

Yeah, i subscribed pretty early on and it's been awesome to watch this channel grow. Every video is better than the last in my opinion and I think his style hits people at the most basic beginner enthusiast level and provides great info for the more hardcore. Love everything I've ever seen here.

[@Mister_Brown]

as far as voicepath or v.61 is concerned, it works pretty much as you described it, it uses a simple 4 point qam constellation and then modulates the resultant qam points with the voice traffic limited to make sure the resultant output still fits in the constellation and decodes with adequate margins, then on the receiving end the data is extracted and then subtracted from the signal and what you're left with is the modulated voice data that can be extracted. it would be interesting to hear how it sounded when there is enough line noise to cause data errors and it subtracts out the wrong data, although a 4800bps it would probably take very loud input sound and lots of line noise to get it out of the margins and actually see data errors neat trick though and one that i actually saw implemented recently in an engineering school project to encode hidden extra data channels in the noise margin on optical fiber transmissions

[@v-1nce]

didn't fall for the VoIP trick, but also lack the signals theory to figure out where you'd find a big enough hole in the spectrum to reliably stuff in a few kHz. thanks for the elaboration!

[@MrRedwires]

That has to be one of the most bizarre and slightly terrifying ways of modulating data I've heard of so far. Modulating the modulated data itself, that just feels... Wrong. Thank you for shedding light on this manner

[@kaitlyn__L]

@@MrRedwires if you want to feel this feeling even more, CuriousMarc has some videos about how the Apollo moon landing data, voice, and TV was modulated. At points there's phrases like "PCM on PSK on FM on PM"! And modern wifi goes even further with stacked modulations, it's pretty crazy. Of course if done wrong, one modulation might interfere with another one, but when they're picked carefully it's just like putting a box in a box in a box!

[@v-1nce]

@@kaitlyn__L B&W backwards compatibility in the NTSC color standard quickly came to mind for me also. despite being a heinous design constraint, conceptually & mathematically i agree with the box-in-a-box description... i'm still somewhat in awe of this kind of thing happening decades ago, with comparatively primitive simulation or formal verification tooling to gain confidence in the design, and it pretty much just worked 🙃 (that could be confirmation bias though, i wonder if there's a good example of a broken attempt at backwards compatibility that ultimately steered a product line to a premature dead end)

[@finkelmana]

I remember in the mid 90s, reading an article or two about the makers of the PGP encryption software in that they made software which would let you make secure, encrypted phone calls over standard modems. It was called PGPfone. I never heard of it being used, nor can I find much information about it. I wonder if the US government killed it off. It would be cool so see demonstrated though. Side note, an air fryer is an oven. A convection oven, more specifically. The one thing it isnt is a fryer.

[@stevesether]

I don't believe there's any conspiracy necessary. It's just non-trivial for the technology of circa 1995 to have the processing power to encrypt a phone call, decrypt the other side, encode and compress the voice, and decode and compress the voice all through a pretty-slow connection where you'd be lucky if you got 28kilobits/second. I recall hearing about this at the time, but I'd be surprised if it worked very well with mid 90s technology. By the time the technology caught up in circa 1999/2000, there were far better ways to talk via encrypted channels over the internet, and not over a modem.

[@finkelmana]

@@stevesether Im not talking about a conspiracy. It wasnt a secret the US government wanted to prevent foreign countries from getting ahold of strong encryption. There were laws preventing the export of certain types of encryption to specific specific nations. I have no idea of the quality of the audio was or if there was latency. However, Im sure it wasnt advertised as something you wanted to call your mom with. It was for people who wanted to talk securely.

[@irtbmtind89]

There are still legacy systems around that work like you describe at 11:00. I use some of them at work (logistics/supply chain related stuff), which means you are seeing data that isn't actually "live" but was exchanged with another computer very early in the morning before the workday started. Of course this actually works now with a bunch of custom made emulators and compatibility layers over a VPN on the regular internet, but fundamentally its the same 1980s code that in the past a minicomputer at a warehouse would run to make a phone call to a mainframe at 3 a.m. to exchange data.

[@user-fh2fm7vr4m]

terrifying, but I completely believe it. I still work with a machine that doesn't support lowercase.

[@NotProFishing]

Literal tech witchcraft

[@kanalnamn]

I guess you're talking about UUCP. There are TCP/IP implementations of that also.

[@xredhead7135x]

​@@user-fh2fm7vr4m if you think that's crazy, look up how the airlines still operate with booking flights and sharing data cross companies. There's a good video on it out there, probably Wendover or half as interesting or something.

Amazing research on this again. I love the way you slowly ramp up the topic, so we get to know first every detail about the niche situation where these devices were useful. I've never heard of these devices. But then again, the whole dial up thing passed me by, at my parents there wasn't even a wired "landline", just something which was emulated over GSM via a Nokia Premicell terminal, and I didn't have the serial cable to use it's CSD capabilities (I wasn't even aware it had such feature back then).

[@CathodeRayDude]

Thank you so much - I put a lot of effort into making my stuff _highly accessible, without being dull_, and people rarely comment on that specifically so it's nice to hear that my efforts are worth it! I just figure, an awful lot of people probably know _more or less_ why these limitations exist, but not the details, and filling in the blanks helps the whole story come together. One thing I wish I hadn't missed was early data over GSM. There was a whole ecosystem of products based around it, but in the US, almost nobody used them except traveling businessmen, and by the time I became aware of them. all the systems were long gone.

[@kFY514]

My parents actually _never_ got a landline, so we never had a phone until cellphones became the norm in the early 2000s. I think I used CSD once, I was desperate due to some deadline, I think it might've been school recruitment or something like that, and my home broadband either failed at the time, or it was before we got one, I don't remember that clearly. Anyway, where I live, until the late 2000s it was conventional wisdom to _never_ use cellular Internet because it could blow your bill in minutes - especially CSD, but early GPRS wasn't much cheaper either. I remember people quite literally having the fear of clicking the Internet icon on the not-quite-smart cameraphones of the day by mistake. I felt like an early adopter among my group of friends, using Opera Mini via EDGE on my Nokia 3110 Classic ca. 2008 - that's more or less when mobile Internet started to become affordable-ish, likely thanks to the 3G and smartphone revolutions happening around that time. But most people I know were still clinging to the idea that it's prohibitively expensive to _ever_ turn on data for at least another year or two.

[@kaitlyn__L]

@@kFY514 yep, once time I tried GPRS and loading Google halfway used up the £10 of credit I'd just added. Then it gave me an error because I ran out of money. And then I realised it wouldn't be able to pick back up from where it was. Then I knew never to do it again! The first time I used mobile data was after I saved up for an iPhone, because I made sure to buy 500MB as well. On pay as you go, data you hadn't specifically bought ahead of time was still charged at a ludicrous rate. One time I forgot to get another 500MB after the previous month's had expired (there's a whole other "joy" to go into) and again ate through about £15 of credit accidentally. That's actually what got me to switch to a contract, at the same price as the 500MB I was buying each month, but with 1GB and a bunch of minutes and texts too.

[@SixArmedSweater]

@@CathodeRayDude You’re legitimately how I’m learning about this sort of tech, so you’re definitely doing a great job making it accessible.

@@CathodeRayDude technically I think you could revive some of these stuff to be tested, eg. there are GSM base station emulators for SDR hardware which are getting more and more accessible for the average person. There are also some specific Motorola cellphones which can be hacked to function as a base station with something called osmocom. But running a GSM network (even if it's being done with very small power and for a short amount of time) is a slippery-slope at best as I've heard :D

[@themeantuber]

Great episode! I remember how happy I was when I had a modem that could pause all activity on call waiting, let the phone ring and then resume everything after you've reconnected. There was even a little downloader program that allowed for a download to resume after you've taken a call and reconnected to the internet.

[@AjinkyaMahajan]

Wow. I left speechless with the amount of efforts you put in this video. Thanks

[@Thecoolgman]

My Dad used BBS for about half a year in the mid 90s before discovering the WWW, then with Dad/Mom both being gamers and Quake coming out, they decided it was only logical to get a second line. The interesting bit though a lot of people overlook is that they also used a service called MPlayer (not the media player). MPlayer was like the first "lobby" for video games as we know today. It would hook up Quake players with other Quake players unlike Gamespy which just showed you active servers. Ontop of that, it apparently had a VOIP-like voice chat. My father told me people would join MPlayer Quake lobbies *just* so they could have voice chat with their friends, and that in combination of running around a 3D world with your QuakeWorld skin (Avatar) made it like a prototype Second Life or VRChat. Of course, MPlayer died not too long after, Half-Life/Counter-Strike gave us VOIP in games a couple years later, and my parents dropped Dial Up as soon as they could sometime in '99-'01. That was the end of Dial Up for us, well except when I went to Grandma's. Took her till the later 2000s to upgrade heh.

[@WayneKitching]

Great video about technologies I didn't know existed. Growing up in South Africa, we were behind the curve technology-wise. I started using the Internet at university in 1996, but had dial-up at home from 2001 to about 2005. In 2005, my sister Skyped her boyfriend (audio only) in the USA through my Linux VIA EPIA system over a 56k modem and it worked well.

[@gymprofessor329]

Your explanations of the modulation techniques was dead on. I had to go read the spec out of curiosity, but you nailed it. Just some classic nested modulation madness.

[@danham]

Danke!

[@mayw6571]

This is fascinating, I had no idea such things existed, but I can imagine how many hours it took to figure out how to get all these demos going for us, so thanks for this ultra-level nerdiness! Sidenote: my school district had Dells of exactly the same model as yours until at least 2005.

[@LondenTower]

WHAAAAT? That's mind-blowingly cool! 🤯😎 Also @ 18:52 you literally killed a serial/networking connection by just yelling? Never thought I'd see that happen, LMAO!

[@fields_of_regret]

Man I just want to say that I love your work, I really appreciate the effort you put into these videos. I always find myself impatiently wondering when you're gonna post something. Greetings from Brazil!

[@threeleggedman]

CRD - I really enjoy your videos. You're a great educator.

[@zrobotics]

14:31 claiming all modems are identical is very much misinformation. Yes, they all use the same modem chip, but the cheaper ones had worse support hardware and filtering on board. I was on a very marginal phone line, and fried a ton of modems. I assume this is due to our local carrier having issues with their ringer and pumping excess voltage throught the lines, but I can't test that now. Neeedless to say, I had modems dying after ~2 months, the longest lived were US robotics around 8k-10 months. I looked over my pile of dead modems, since I'd continued to save these for the relays on them, and the more expensive modems had much more extensive filtering circuitry., A more expensive modem had better filtering circuitry in front of it, which not only provided better connection stability but also helped insulate the modem from poor phone lines. Yes, all of these modems circa 98-03 use the same chip, but there were huge differences between them and a better quality modem would provide a better connection. The analog circuitry in front of the chip was the major differentiator here.

[@digitalwerber_]

Thanks!

[@JT-bb9di]

This has been one of your best videos ever. I love your channel but this content is just perfect 👌👌 Thank you for taking the time to make it! 😊

[@jackfurlong]

Ex-Paradyne employee here. Even those of us who built/tested the circuit boards didn't fully understand the tech.

[@tekvax01]

One of the first computer programs I ever wrote (back in the late 70s, and early 80s) was an address book for my TRS-80 Model 1 computer. I designed and made a little circuit that would use the cassette port to pulse-dial the telephone, at 20 PPS, and not the usual 10 PPS, that normal dial phones used. I kept all my phone numbers in that program and used it for many years! I even saved the database of telephone and addresses on a cassette tape, that I could load into the computer. Fun times!

[@eDoc2020]

Interesting. I wouldn't think most electromechanical telephone switches would handle fast dialing like that. I know the 5XB switch would throw trouble cards if you were out of spec. Maybe you happened to be on an early electronic switch.

[@dylankauling]

When you shouted into the phone, as soon as I saw "No carrier" I burst out laughing before you even did. That was hilarious. Keep up the awesome work. 😂

[@ZacCrawforth]

Ah, man, the stuff I missed by being bleeding edge! By the time this stuff was around I was running ISDN, and BRI came with 2 lines. Thanks for an informative look at the stuff I missed. :) Fascinating as always.

[@ChefSalad]

I never had ISDN at home, but it was definitely a real solution to the problem at the time. It was just a little too late, because by the time ISDN became widely available, cable modems had come out to largely the same places. I know my family got a cable modem in 1998. In 2000-2001, I actually used ISDN, but in a full-out networked situation, which made it kind of worse than dial-up. We had it for Internet access at the local senior citizen's community center, which was where my high school CISCO networking class was held. There were like 12 of us sharing the ISDN line through Ethernet during the class. Before class started, we would all be trying to browse at the same time and it would bog down pretty hard, but if you snuck in some browsing while the teacher was lecturing, 128kbps was pretty nice at the time.

[@tehlaser]

18:55 I love this. Your reaction is delightful.

[@eMorphized]

Working with radio, i found out that modern RF modules have a weird solution for networking over UART. They simulate packets in software by either making each transmission the same length or adding a start and end code, and then add the "metadata" to the beginning of each packet so that the receiver always knows who sent what. This does mean that all data going in has to be parsed by the receiving computer, but it works.

[@OhNotThat]

19:00 You laugh but that's how we literally ended dial up calls when someone in the household refused to log off. Yelling into the shared phoneline until the carrier signal was too degraded and the modems gave up trying to talk to each other. And then calling who we wanted to call.

[@GreenAppelPie]

You’re right on the lack of testing. i purchased 14.4 modem when it first came out in 1991 and there was a particular command function that was not working, I was a computer nerd that used procomm plus (they are still around). I called up tech support and they mailed me a pre-programmed EEPROM, and a note to please send the old one back. I swapped it out and it worked no problem. I wish I would have held on to the modem, it was an ISA board that came in two halves that came apart and it was chunky. Believe me there was no Rockwell modem on a chip on it.

[@antkoos]

18:51 I love how the modem starts screaming back, gives up and just buzzes after that

[@mrfrog8502]

26:00 v90 and v92 require compatibility with the equipment at the exchange (connection needs to be PCM not analog to achieve speeds higher than 33600 bps) which suggests there's some additional signaling required on the exchange side to make mixed voice and data calls possible.

[@donaldhosford5194]

That was very informative! Loved it! I lived through that era. It was a plesant stroll down memory lane, hearing those modem noises! Wonderful! Thanks.

[@CoyoteSeven]

I feel old when I see you describing how modems work in contrast to modern network technologies and I already knew all of that. D:

[@nickwallette6201]

Who doesn't know how call-waiting works, right guys? haha... Wait, seriously??

[@frogz]

@@nickwallette6201 whats a call?

[@dansmoothback9644]

​@@frogz who was phone

[@AltoidJTP]

My ISP provides a VOIP function that provides a land-line. Call waiting works exactly as you would expect.

[@monad_tcp]

@@nickwallette6201 everyone when I put them on hold on my cellphone

[@SonicManEXE]

“Two of them” has become my favorite meme because of this channel. I love seeing it in CRD videos :)

[@video99couk]

32:30 I remembered that just today. I had looked up a 'phone number on my PC and just for a moment I remembered the good old days of being able to dial it up from the PC. Not sure how that was done now, but I remember it worked.

[@Minigig]

I have to say, I was queuing up video to watch , I dropped everything else when I saw that this was out. I cant get enough CRD!!!

[@dancingwiththedogsdj]

Woo hoo! A CRD video to enjoy! Thank you! 🍻🌎❤️🌮

[@oldteefgaming5517]

It's 330am here. Im omw to downtown Chi to work and struggle bus and the modem yelling made me smile.

[@AltoidJTP]

In joining the chorus, I, too,, thoroughly enjoyed this walk down memory lane. I think I was 19 or so when those modems came out. I think that if I were able to afford the expansion slot version, I would have gotten it and just sat it beside my generic hayes-esque modem of the day. I was big into telecom for a long time, nice to see the coverage of a very old, but also very important, bit of history. Kudos, sir.

[@tylerk6206]

43:10 The picture of this FaxFinder you used is funnily enough the exact model we still utilize to this day at the business I work in IT at. I need to use a Win 7 VM to even get into its admin page, and it has since lost the ability to connect to any mail server due to new security standards... but it functions just as it did the day it was purchased!

[@regisque]

I got lost in your funny words magic technology man but I'm impressed with your musical taste on display at 53:30

[@NorfKhazad]

@27:02 I had a great mental image of an anthropomorphized modem seeing a file dropped into the transfer app and commencing screaming, at which point the other modem hears it and starts screaming too and it's just back and forth between the two modems screaming at eachother until the first one stops, the second one stops, and they're both panting for a second, then calm down.

[@CathodeRayDude]

that's pretty much what I was thinking

[@NorfKhazad]

@@CathodeRayDude someone needs to animate this.

[@pcfan1986]

I remember in the 90s. On of my friends had ISDN at his house. Not only did he get 64kbits download, but he also had a second line for the phone at the same time. This was absolutely groundbraking. He could call AND game at the same time!

[@Splarkszter]

i never searched for it because i never had the curiosity for it, but i finally learned the purpose of that sound. thank you so much for making these videos of old harware. love it so much.

[@jfbeam]

We had 56k (X2) in 1997, and V.90 in 1998 as soon as USR (3Com) had the firmware to do it. The modems were DSP based, so all software; new standards were trivial to support. (in fact, X2 was a software upgrade) PRIOR to the USR modems, we had much older tech using Rockwell chips that had to be physically replaced to change modulation support. (which we did in 95-96 to go from 28.8 to 33.6.)

[@grotsoftsadventuresinelect8868]

It's really weird. Everything you show I lived through. I was extremely happy when every bit of technology you show was upgraded or replaced. Yet, your videos are hypnotic! Nice one!! I fix up 1930s to 1960s valve radios, so my parents think exactly the same about my hobbies.

[@xwolpertinger]

ISDN sure was a nice thing to have back in the day

[@mesicek7]

Yup we had it aswell. Was pricey though.

[@adonaros]

so im a telecom person in north america - he mentions CPC, which is something we use here in USA. im 30years old now, and i have only seen TWO isdn circuits my lifetime. I have many many more PRIs. I am also of greek decent, and do go to greece often, so im aware how ISDN works etc, i dont know why, but it seems like ATT was just a lazy company. *shrug*

[@AgentOffice]

Only businesses ever had it

[@sheppardpat47]

18:50 Bahaha that was amazing ! You’re really amazing 😂 screaming in the phone making the connection dropped it’s super funny!

[@P2000Camaro]

Man, normally I get so bored with long-form videos.. but I totally can just sit and watch your shit for hoooouuurs. So much interesting shit. A lot of which i already knew, but it's just so cool to see it all in action and stuff.

[@losbopfos5637]

I would love to find someone who talks about the components of civil aircrafts like you do about 90's/2000 technology stuff.

[@henson2k]

avionics has a lot of Easter eggs

[@cheeseparis1]

Perfect video! I can imagine the tons of research and the hours of fiddling with parameters to make different brands talk to each other... Even if I had owned such a modem, I would have needed your KZbin channel to know how to use it! Congrats

[@dmacpher]

Oh boy hope this covers Mplayer! Was way ahead of its time

[@HadleyCanine]

There was another clever half-solution I remember my dad had setup. There was some service where (based on what I know about in hindsight how this stuff works, anyway) you could set the "line busy" redirect number so that (combined with disabling call-waiting in your modem init strings) instead of going to your regular voicemail service, it would go to this company's service instead. They could then read the caller ID data, send you a popup notification on your PC with that info, and you could then decide whether to ignore the call and stay online, or immediately disconnect and try to catch the call in time. We didn't have it very long, and I can't remember for the life of me what the company/service/etc was called, but from the little I can still remember about it, it seemed to at least work pretty well.

[@toddburgess5056]

We had two phone lines in the 90's and early 2000's so dialup wasn't a huge issue when we needed to make a phone call while dialed up on Prodigy or AOL (America On Line) lol

[@lfla0179]

My old man said that power companies use the power lines themselves as a backup network. They just wire a modem to that GIANT COPPER ALUMINUM STEEL CABLES and let it rip. At 300 baud. Something on those terms. Substations can talk to each other and send remote commands and stuff. Except that was in Brazil and the 1986 blackout was restored in less than 72 hours and a bunch of North Americans came over here to ask us how we did it. Exactly because of low-level tech like this, and a 5000 mile network of serial cables. It was basically like a wired radio, but on that level.

[@AlexCruise]

I would love it if you did a series of videos where you tour the Seattle Telecommunications Museum :)

[@RundFyrkant]

Very cool episode. Love the touch with picking up the phone sound during testing. 🙂

[@AnonymousFreakYT]

Alright, after spending *WAAAAY* too much time analyzing the V.61 ASVD spec, I'm _pretty_ sure it works as follows: (First, your QAM idea is mostly correct - although by 14.4, modems were using multiple frequencies.) First, the primer on modems: Models turn 1s and 0s into the screechy noises in the audible frequency range that phone lines transmit. Phone lines, in case you hadn't noticed, aren't exactly CD quality. One digital switching took over, analog phones lines allowed only a subset of the audio frequencies the human ear could hear - specifically the frequencies that the majority of human speech takes place in. So modems have to figure out a way to compress 1s and 0s into audio data. Note: Much older computers like Commodore 64 and Apple II tape ports worked much the same way. They store the data as analog audio. It's just that tapes have a higher dynamic range than phone lines, so they had "more room to work with." As time went on, engineers figured out better ways to compress data down and modulate it differently to allow for faster modem speeds. Up to 33.6 kbps is still 100% an analog "screechy noise in the audible human hearing range" compression. At the time of the V.61 spec, 14.4 kbps was the maximum speed. Yet for ASVD, you only get up to 4800 bps (4.8 kbps) That's because it used the compression _methods_ for 14.4kbps, but only used a tiny part of the audio "spectrum" available to it on the phone line. Now, for a side-bar on old vinyl records… Old vinyl records store audio in wiggles in the groove. But, because of the way it's stored, low frequencies carved into the groove at the same "volume" as high frequencies would be overwhelming to the needle, and a lot of the noise on a record is at higher frequencies, which would drown out the higher frequencies. So the RIAA developed "the RIAA curve" - sound is recorded with the bass lowered, and the high frequencies boosted. Then when played back, the amplifier boosts the bass, and lowers the high frequencies. This makes it sound like it should, while cancelling out (somewhat) the negative aspects of vinyl records. V.61 does similar to the voice portions of an ASVD call. Part of the voice frequencies are just outright cut out for use by the data (small gaps in the audible frequency range )others are compressed-and-expanded. You have even less dynamic range than a normal voice phone call, but it's enough to be listenable. if your call was local, it would probably be about the same quality as an international phone call over normal phone lines. The modem would compress the dynamic range of your audio stream (not digital compression, purely "squashing the signal") and send it analog over the line, then the receiving modem would decompress the dynamic range, introducing noise, but making it listenable. At the same time, it would cut out some audio frequency range completely from the "audio out" (speakerphone/headset jacks) because that portion was used for data, using standard bandpass filtering techniques. It's the same basic idea as a "DSL filter" would later use to get the "DSL frequencies" off your voice phones. Internally it's a splitter - one part goes to the modem, with a bandpass filter that can be turned on or off to hide the voice frequencies, the other part goes to the "audio out" portions, with a bandpass filter to turn off the data frequencies. If you did a "data only" call, the audio out portions would just be completely disabled, and the data modem would get the full use of the line; if you did an ASVD call, it would split it up thus the modem had to be much slower. This theoretically could have been done with older modem technology, too; but it would have been so slow as to be truly unusable with the older modem specs.

[@mrkitty777]

Imagine a commodore c64 with 56k6 loading speed from tape. That would be faster than a C64 diskdrive.

[@pennyandrews3292]

My Mom asked the phone company about this issue because I was online all the time right before dial-up fell out of favor. Their solution was to buy a second phone line. Since around the same time we switched to a cheaper ISP than AOL, it wound up not being much more per month. Basically, if you REALLY didn't want to deal with this problem, there was a solution that AT&T was more than happy to offer you, a second phone line, you'd just have to pay more for it. They'd had that option for fax machines for years, but people used it for early Internet as well. So one of the reasons why there wasn't more research into solving this problem is actually because the people who were online enough for it to become a huge problem mostly just paid the phone company to make it go away. Needless to say, broadband wound up saving us money very early on when our phone company told us they'd started offering it, because it only had to be competitive with the cost of Internet plus a second phone line. Since it was through SBC, they were happy to disconnect the second phone line and hook us up to DSL the same day, because they knew exactly why we had it.

[@willernst8376]

I'm going to start saying QAM like wham from now on. It is normally pronounced like "kwom" rhyming with ROM. But I like yours better. Anyway, these modulation schemes are used all the time in rf engineering, so that is where you go to learn about that sort of stuff.

[@tomhekker]

I worked for a Dutch telco at the time. We were working on using DSVD for doing actual normal phone calls during a modem call. Our proof of concept forwarded your normal phone number to the modem on our end that would put the phonecall inside the DSVD session if you got called, and if you picked up the phone you would have gotten a normal dialtone. This was linked to the PPP/RADIUS login, so if you’d dial up with someone else’s user you would be able to use their phone number, which was a funny side-effect. ISDN and DSL happened shortly after, there was more money in both of them. So it was cancelled. Also, around 90% of the market wasn’t using our internet service but the ones of dedicated ISP’s, not the phone companies one, so management saw no money in it, which made sense.

[@GutnarmEVE]

I ran a FIDO node in the 90s (bit late to the party; didn't bother me as a teen); you wouldn't believe the compatibility issues you'd have with even same-chip-different-oem modems at times 🙈 (US robotics and zyxel did well to me; ELSA was fine too, but a bit picky -- and quite pricey at the time) *edit* also, 16550 vs 16540 UART vs that cheapest of onboard serial controllers your big-box-store PC might've come with back then? quite a margin.

[@CathodeRayDude]

oh i can't even imagine, hahahaha, gosh it had to have been a mess

[@GutnarmEVE]

@@CathodeRayDude keeping that BBS running, with my dad going mental re: phone bills? a mess, it was, indeed :) (but also quite a learning curve: when IP, broadband, "se internet" became a thing, I already had a clue what that decentralized networking thingie might be about. served me well for years.)

[@vwestlife]

You missed one obvious point: if two users can type whatever they want while they're on a peer-to-peer dialup connection, then why wouldn't they just converse with each other via text while they're connected, instead of talking? Sure, maybe while playing a game or waiting for a file to transfer the simultaneous voice feature would make sense, but if the point is to exchange and discuss data, anyone tech-savvy enough to use a computer and modem for that purpose should also have felt comfortable text-chatting as well.

[@CathodeRayDude]

that's a good point, but again, businessmen. they simply would not have thought to do that.

[@NigelMelanisticSmith]

I got a phone call halfway through this video, and it shows how much I take modern multitaksing for granted when youtube just shrunk to a little box

[@stevesether]

A couple technical critiques. UUEncoding was a thing in 1994, and was used to send files through email. It wasn't an attachment, and you did have to go and manually take the email file, save it, remove the headers, and uu-decode it, but people did do this. Also, 300 baud was most certainly considered VERY slow by about 1985, and just about everyone had 1200 baud by then. There were even BBSs that wouldn't even allow you to connect at a 300 baud in around circa 1986 or 87. 2400 baud became quite standard and somewhat common by the late 80s, with 9600 or even 14,400 being available for people with a few bucks. Those old "dumb-modems" didn't last much past the very early 80s, and nobody really used them in around circa 1985-86. Source: being in the middle of it all. Yes, I started out at 300 baud.

[@SheepUndefined]

Wow, the first sound I heard in this video really was DSPOSIT1 Zombie sight #1 Sound Ideas Series 6000 "Animal, Creature - Large Animal Growl 02"

[@CathodeRayDude]

Where's The Lie

[@ajroach42]

Hey Gravis! Thanks. This was very good.

[@cberge8]

For that mic input issue, sounds like there may be a bad capacitor in the unit causing those issues. Would probably be a fairly easy repair if you want to tackle it.

[@CathodeRayDude]

that's a good point, it didn't occur to me that it could be tired old parts

[@cberge8]

​@@CathodeRayDude bad electrolytic caps were notorious right around when that unit would have been made. Should be easy to spot if the unit can be opened easily.

[@namenamenamename7224]

Absolutely incredible stuff! So grateful I don't have to support any of this stuff in a work environment, but so neat to learn about.

[@hyperturbotechnomike]

I was lucky that my parents got ISDN with four channels very early, because my dad often worked from home. He was a very modern man. That was in Germany during the mid 90's and that was really really expensive. Each ISDN channel is basically a digital phone line. They also could be combined. In 2000 my parents got T-DSL with around 700-800 kbit/s. I used that as an opportunity to download pirated movies and music CDs, burned them on CD's and DVD's and solt them on the schoolyard. Made a lot of money for a 14 year old. My parents were upper middle class, but they were pretty strict not to spoil me with money, so i worked for it. When i was 16, i had enough earnings to afford a beast of a PC. A brand new Pentium III 800E system with four DVD Burners and massive hard disk. I believe i had two 40 gigs and external firewire ones. What a time that was. Nowadays i still own a business, but with more legal methods ha ha.

[@KalleKilponen]

We didn't get ISDN until 1999, but having the option to either use both lines to get a whopping 128 k connection or use a 64 k connection while still using the other line for regular phone calls felt incredible at the time. Of course that was soon surpassed by DSL (we got 512 k HDSL in 2001), which could use full speed regardless if you were on the phone or not. Come to think of it, our connection speed seemed to double every couple of years back then. The speed internet technology progressed was remarkable.

[@Mattman993]

The beauty of Fourier series! Summed signals make our world possible, it’s beautiful

[@AlexCruise]

erratum: at 14:00 you say "US Robotics" when holding a Hayes branded modem... AFAIK the former never acquired the latter. ;)

[@CathodeRayDude]

lmao yeah i completely missed that. it was a plain old flub, wasn't in the script

[@Radiiiiiiiii]

I love the nice touch of "recording" the phone call to play in the video

[@acerIOstream]

DOOR STUCK! DOOR STUCK!

[@staticfanatic]

I BEG YOU

[@dudeforrealsies1023]

Another person. Other humans are officially canon in the cathodeverse now.

[@tekvax01]

(27:53) Many modems didn't have the RJ11 jacks wired together. Many had a relay, on the phone side that would cut the phone line, when the modem answered the call. That was why they had a picture of the wall jack on one, and a phone on the other... because those jacks were not the same, and were not pin-to-pin.

[@tekvax01]

Answered in the very next sentence... I simply must stop commenting without listening to your entire piece to camera... Many of the USR modems had those relays too.

[@v-1nce]

dammit Gravis 😂 had to rewind twice after 9:46 to hear you over of the chorus of brain worms screaming "DOOR STUCK"

[@hadhad69]

No way I'm going to watch this for an hour...oh I did, very good video!

[@DEMENTO01]

i loved this video so much (i mean i love all your videos ngl), its so cool to see how chaotic the landscape of anything was in that era, i like deep dives into all the weird shenanigans of a "standard", i now feel like i understand how modems work and what could have been and i know i'll rant about this several times in the future lol so thank you for this

[@xtinus]

When I saw the intro, I thought it was a gimmick and wanted to chime in and say our (monopoly) telco had a tiny application that could indicate a call waiting if someone would call you (I think even with caller ID), but it's obviously far more inferior to the solutions you display; I'm jealous at your setup :) I do remember vividly the day I wasn't allowed onto the internet since my brother was paying for it, and blowing into the handset (instead of screaming) to disconnect while not triggering any suspicion. I also ran into the problem you mentioned at 19:00 and I never got the game to connect, with spite up to this day. Thanks for making this awesome video!

[@ZiggyTheHamster]

I'm at minute 6:00 and so this may be premature to share, but there used to be a service called CallWave which used the "call forward on busy" feature that almost all phone companies had available for free to forward calls to their toll-free number. When this happened, I guess the phone company would also forward the original destination number and then an app would pop up on your PC, tell you who is calling, let you screen the call like Google Voice does, and press a button to answer it if you wanted. If you did this, it would immediately hang up - this was pre-V.92 - and then their toll free number would call you with the original call. They even had some adapter that would make your actual phone ring (we never bought it). It was only $4.99/mo or something like that and I found it life-changing. I could download something that would take days with the download manager I think had the word Gator in its name and not worry about missing a call and getting in trouble. I'm sure that the hour I have left will reveal something absolutely insane that I never knew about, but I wanted to share CallWave in case that's the thing and I'm not the only person on the planet to have ever used it :).

[@ZiggyTheHamster]

And I'm done. Definitely never heard of either of those technologies, but as Tay Zonday mentioned, I did use Roger Wilco as well as MPlayer (which apparently is from the same people that made XBAND, but I never knew back in the day). CallWave was the thing that solved the mom yelling at you for playing Quake online all day while she missed calls problem for me. And it's such a simple approach that I'm still surprised that I'm among the 5 people that remember it. You'd think that if you were a major ISP like AOL or AT&T WorldNet that you'd add this technology to your service just so you can one-up the competition, but it never happened. They had call forward on busy, they had software-controlled phone switches, they had all the call metadata. But as far as I know, only CallWave did anything with any of this. I should also add - they could detect if the incoming call was a fax call or not and if it was, it would just auto-answer and let you download JPEGs and TIFFs of the fax pages once it's received and processed. Like all stuff that AT&T could do for essentially free, they just needed the system tray application.

[@Kinkajou1015]

So I worked for AT&T in their ADSL tech support desk from the end of 2008 to the end of 2016. Something a lot of people do not realize about ADSL, it's essentially a very fancy dial up connection. If a customer's modem was malfunctioning in just the right way they could call in, line be staticky, you ask them to unplug the modem for a minute, all line noise goes away when they unplug, then when they plug back in, the exact same dial up carrier signal could be heard. Well not EXACT but close enough, and once the modem sync light was solid, the static would be essentially the same as when you pick up the phone line during dial up days. What a beautiful mess that world was. So the way I understand it, if you had DSL they sent that signal on a frequency too high for human hearing and possibly even nuked it on the receiving end so if you had a call on the line it wouldn't interfere. Thus why a DSL Filter was needed on every phone jack except the one the modem connected to, the filter would nuke the same frequencies for your phones so you wouldn't potentially interfere with the signal and cause the service to drop.

[@BlackHoleForge]

21:50 it's about that time that I would put the file on a floppy disk and put it in a hard shell cover. Then we would have to get on our bikes and ride it over to our friends house to give them the file, and if we were lucky they might have recorded a new mixtape from the radio.