CATIA IMA Car Modeling Techiques00

[@1bhamze]

Fantastic tutorial! Thanks for sharing and putting this all together!

[@GerardAlcini]

Hi all, these are techniques from CATIA Imagine and Shape from release V5 R22. At the time of this post, CATIA is at release level V5_6R2018 (V5 R28) and the 3DEXPERIENCE V6 based equivalent is 2018x. So a lot of new functionality and improvements have been made since these videos were created. But the purpose remains relevant for anyone who wants to learn subdivision modeling. This guide will give you a solid foundation to create anything you can imagine. Feel free to download the CATParts, car images and PPT training guide to get started!

[@abdelrzak2399]

brother is this the right way to make class A ? or with icem surf and alias studiotools

[@GerardAlcini]

Hello Abdel, This is NOT Class A surface but Conceptual Surface. This is a preliminary stage to ideate and quickly come up with one or more themes so good design decisions are made before moving to production surface development.

[@rezasangsefidi8033]

Its fantastic sir.didnt have more videos in this catia mode?

[@irajchamani]

Hi Gerrard, your design was very nice. Because the playback speed sometimes increases, I do not understand how some changes. Can you send me a slow video of this beautiful work? Of course, if possible. Sincerely, Iraj

[@ballazolo]

Hi Thank you for the great Video. I would have two questions. 1) At the very beginning of the Video/Tutorial you have created one Curve with 13 Vertices. For the first and second area you defined 5 vertices but for the thired area only 3 Vertices. How you define the number of Vertices? 2)At min 2:25 in the first video you make an Extrusion of the Surface. Why ist the result a curved contur? How did you decide to take this steps to round the Corner?

[@拱彦旭]

1. i think the number of the Vertices is not very strict, is based on the complicity of the contour. the Hood is relative complicated, so use 5 vertices, and the tailgate is simple, so...

[@ericwang6265]

Hi, Thanks for the great tutorial! But I have a hard time to move the entire extrude line set (like 0:39). I can only move the lines separately. Could you explain it more specifically?

[@GerardAlcini]

Eric, once the extrude "line" is created, you either have to hit the enter key or space bar, then go into modification and trap all the vertices and move freely.

[@ericwang6265]

@@GerardAlcini thank you sir!

[@rahulsarker7945]

Thank you Sir. It's a great tutorial.

[@battaler1365]

Thank you for these nice videos. It's so beautiful. Can you shoot more videos? For example, surface commands.

[@battaler1365]

Hello good day. Can you help if you are using Catia V6 R2009? Thank you for your interest. How do you save files? Do you use v6 connected to the internet? Or using it without connecting to the internet? I want to save the files without connecting to the internet. I tried a little, but I couldn't. Finally, I cannot add material to pieces. For example, I can't add metal, glass, plastic ... to the part. How do you add things? Thanks again.

[@GiacomoDamiano]

Hello, i've a question about the point displacement, i want that when i move one point the others stay stopped, but this didn't happen, ecause when imove a poitn the other also moved . is it a setting that i'm imssing? thanks

[@拱彦旭]

i think you must select not only one point at one time. The point you selected will change to highline.

[@DoubleDee2000]

Hi, i have a question about the white field up in the middle. I could not find it in my Catia. How do you open it?

[@GerardAlcini]

Sorry, not sure what you are referring to. Please identify which video in the series and a time stamp.

[@battaler1365]

These videos were taken in the Catia V5R22. Perhaps older versions might not have those features, but they may have similar features. In addition, the person pulling the video may have a number of features displayed in Catia according to its own way of working. You may have these features, but you may not see them directly on the screen. I'm using the Catia V5R20. I don't have some of the features on the higher versions. Try updating Catia to a higher version if necessary. Maybe it'il work.

[@khalilibrahim8421]

I want to ask you Where you learn CATIA and imagine and shape?in UNI or self-learning And level of learning? Is there Any free or paid Imagine and shape course . .I Have catia 2010

[@GerardAlcini]

Hello Khalil, there are online and instructor led classes available. If you're a student, you can also purchase a student license of CATIA V5 for a very nominal fee. Go to 3ds.com and follow the appropriate links. If you do not know CATIA yet, then start here to develop your training path: www.3ds.com/fileadmin/Training/PDF/V5courses/CATIA/V5-course-catalog-june-2017-V5R19-to-V5-6R2017.pdf

[@hamedsh7946]

Hi Gerard what's this car name? I need to find that blueprint pics Special thanks 🙏🙏

[@GerardAlcini]

Hi Hamed...its all available for download. Follow the Google Drive link in the first video under the description.

[@nareshpendam7489]

blue prints?

[@GerardAlcini]

follow the link in the first video. You can download all the data

[@mehranshirvani7179]

​@@GerardAlcini hi thanks for your great videos. I wanted to download the files but the link you shared is not working. Is it possible to share the links again?

[@siemenscadsolutions9994]

Nice video by #siemenscadsolutions