Thanks very much for showing us your accessories Dan. Your bike looks amazing!
@dangas89663 жыл бұрын
That’s ok bud
@jimmycakes71583 жыл бұрын
Planning on getting the 2022 model
@grantgreenwood5223 жыл бұрын
I ordered a red cb500x but after seeing yours I have changed it to the matt black, pick it up Friday 👍👍, already ordered a few of the extras you have shown 👍👍👍
@dangas89663 жыл бұрын
😅 glad to here it . It does look bad ass in black .
@philbennett88963 жыл бұрын
Looks like you have kitted out your 500x very nicely for a good price. Really like that new colour scheme - I liked the red previously but this is much better. You chose well!
@dangas89663 жыл бұрын
Thanks bud
@eddieharney93383 жыл бұрын
Thanks dan.i bought the pearl white version last September. Waiting a while for it. I also have some of your extras on as well. Waiting on luggage and rack.
@dangas89663 жыл бұрын
Arrr very nice good choice 👍🏼. Let me know if the luggage 🧳 is ok thinking of getting some my self .
@brashachilles97253 жыл бұрын
Very nice and economical.
@marklevy92 жыл бұрын
HI - would you have the link for the rear mudguard extender shown in this video at 8:35 please. This looks like a really good idea.
Hi mate these are the them don’t think 🤔 they had a brand on them . the scorpion should be a standard can from factory 🤤. If you do buy them remember to adjust the clutch cable to suit full lock 😏
@grahamhiggins13 жыл бұрын
Looks and sounds great. I have a 2017 version but wish it was a newer one like yours. Who needs a GS eh!
@dangas89663 жыл бұрын
Well the prices of the 2019 model are coming down so keep looking bud .
@justinjamesuk76573 жыл бұрын
Great vid fella. Im in the process of getting myself one of these bad boys, and finding the most appropriate protection and add ons at realistic prices is like searching for the Holy grail... I've already wasted a large chunk of my life searching... Thanks for sharing your video, prices and links... Top man....Rider Dan. (Lovely aeroplane, too)
@dangas89663 жыл бұрын
That’s ok bud ever think iv shown there is still working and in good condition ✌️ .
@justinjamesuk76573 жыл бұрын
@@dangas8966 hiya Dan. Sorry to bother you and interrupt your motorcycle movie making magic, but. Where did you get the sump guard from? Cheers fella.. I've found lots of the other Bob's and bits. Cheers.
@@justinjamesuk7657 there you go bud that’s ok I’m here to help 😁
@justinjamesuk76573 жыл бұрын
@@dangas8966 cheers again Dan. The best match I could find was 60 bucks. So you've already saved me nearly a fiver. However my Internet shopping 2day has cost me a fortune... Our bikes will look exactly the same... Except mines white and won't have that pricey (Lovely soundin') exhaust. Cheers again fella. I consider you the Martin Lewis (money expert).... Of the CB500x world. Top Man.
@francescopierf10 ай бұрын
hi, can you please write the manufacturer of risers for the handlebars?
@johnprior6663 жыл бұрын
Hi Dan, I'm interested in putting on the windshield adjuster kit you have. Can you put on the adjuster kit and use with the standard CB500X windshield? I'm just under 6' and find that the standard windshield is just about OK on the top setting but I like the idea of having some up-down adjustment available with the stock windshield.
@dangas89663 жыл бұрын
Hi bud yes you can I did that first the kit it the same dimensions as the standard hole on the bike . The kit just makes the shield high that’s all .☺️
@jefftan42133 жыл бұрын
Hi Dan. Tnx for showing us your accessories list. Can you send a link where you bought your upper crash guards. I like the look of it. 👍
There you go mate thank you iv trying to get everything matching ☺️
@a1pestservice3 жыл бұрын
Can you look over the screen, or do you need to look through it. Thanks
@dangas89663 жыл бұрын
there’s 3 inches I would say looking over the screen. I get the wind going over me helmet so no vides on the helmet and I’m 6 foot 🦶.
@a1pestservice3 жыл бұрын
@@dangas8966 Thanks for the reply, I might try testing out with plastic extension clamped on the screen before I buy one. Nice looking bike, you have spent quite a bit extra on making her your own machine, and its good how it looks and sounds. I get mine delivered next week, Ye Ha
@dangas89663 жыл бұрын
@@a1pestservice that’s ok bud it’s worth a try they arnt that much the extensions good look hope you enjoy the bike they are really nice bikes .
@johnprior6663 жыл бұрын
Hello Dan, I ordered the windshield adjuster as shown on your video at 1'50. These brackets obviously come from China and they come without any intructions. This might be a silly question since it's fairly obvious how you install them but when I tried I found the 4 fixing screws that put the new brackets onto the existing screen brackets were difficult to get started aand appeared to me to be too short. These short screws will likely fit and work ok if you removed the original rubber gromment assembly from the orignal brackets but I didn't want to start taking these off in case I wanted to put the original windshield back on with the original brackets. Just wondered if you could supply some tips about how you installed these new adjustable brackets. Thanks
@poiro013 жыл бұрын
Nice review thanks Dan; What is that socket sticked above the front right indicator please ?
@dangas89663 жыл бұрын
Hi 👋 it’s a stay for my camera
@poiro013 жыл бұрын
@@dangas8966 OK merci !
@advmoto7863 жыл бұрын
lots of extra fittings there..nice... but you dont have a USB charger installed! and a mobile holder...
@dangas89663 жыл бұрын
The 12v charger is on my kitchen side ready to be fitted 😉. Don’t need a phone holder 😎
@gray58572 жыл бұрын
Very nice looking bike! I’m a new rider and was hoping this for my first bike do you think it appropriate? Thoughts?
@dangas89662 жыл бұрын
Hi bud thank you . It’s a really good bike as standard and there’s a lot of aftermarket goodies you can get for them I would say it is .
@Allen-Doe3 жыл бұрын
Hey, is the exhaust a slip on or straight pipe?
@jeffarnie3 жыл бұрын
Some good ideas you have done that I would like to implement on mine. Are your upper and lower crash bars Givi? Only asking because I have purchased those and would like to install a skid plate but haven't found one compatible with the Givi's lower engine guard. Any link to your skid plate?
@dangas89663 жыл бұрын
The bottom one is givi but the top one is a copy of the Honda version. I had this problem to do I went with this one as it’s not in the way but does the job as even the pricey ones struggle to cover the oil filter.
@@dangas8966 Thanks Dan, very helpful. Ordered one from your link after checking your bike also had a centre stand. Half the price on UK ebay compared to Aussie ebay.
@dangas89663 жыл бұрын
@@jeffarnie that’s ok bud happy to help 😀 . If there’s anything else just let me know .
@arizonaskysurfing92403 жыл бұрын
I was settled on the 2020 red color scheme vs this new gun metallic color - well that is until I saw yours. It's really nice looking !!! Question, any performance increase from the K&N or the exhaust ?
@dangas89663 жыл бұрын
It’s hard to tell riding the bike but k@n and scorpion do offer there dyno reports on the net so there is more hp and torque given as well as weight saving on the exhaust to .I do like the red on the rear frame that Honda said to mimic the africatwin.
@brashachilles97253 жыл бұрын
Why did you change your windscreen from the first mod? Noise? Great vids.
@dangas89663 жыл бұрын
I’m 6ft had a lot of wind buffering around my helmet ⛑. Wasn’t nice 👍🏼
@soggysocks253 жыл бұрын
Just got a 2022...took the windscreen off...much nicer ride now... buffeting and noise
@cloggsy19713 жыл бұрын
Looked like your exhaust was blowing a touch at the bottom seam when you were revving it… Water was bubbling out?! Nice bike with nice mods though 👌🏻👍🏻 You could do with pasting links for everything you’ve bought in the description 👍🏻
@dangas89663 жыл бұрын
It was blowing at the time sorted know though good spot 👨🏻🔧.
@Marvininini3 жыл бұрын
Yeah! I second that. Lot of cheap mods that look good. Would love a reference link since I seem to be having trouble finding items for those prices...
@dangas89663 жыл бұрын
@@Marvininini will try and sort it out for you ☺️
@dangas89663 жыл бұрын
@@Marvininini done mate
@yaumichik75963 жыл бұрын
Nice review
@CoboCobo-jo6uj3 жыл бұрын
Look Very nice !!!💥👌🏼💥
@dangas89663 жыл бұрын
Thank you 🙏🏼
@tiha743 жыл бұрын
Hi, where did you get the tank pad? I bought a cb500x same as yours and am waiting for delivery next week.
The only anti slip tribo seat cover I can find is for models upto 2018, will this fit a 2022 model?
@dangas89663 жыл бұрын
It will fit bud the pillion seat bit is the same from 2013-21 the only difference is from 2019 they cut the seat on the sides but that’s on the front of the seat so it won’t interrupt the fitting of the cover . My cover came off my 2016 cb500x 😉.
@marks9383 жыл бұрын
Nice bike man. Some product names would be good. Enjoy
@dangas89663 жыл бұрын
There was only 4 brands the R&G rear shock cover And the puig screen scorpion exhaust and k&n air filter the other items had no branding .
@akaTelo3 жыл бұрын
Great mods Dan. For the fork gaiters did you have to disassemble the shocks to install it or does it slip on somehow
@dangas89663 жыл бұрын
Well I had the wheel off first then just dropped the forks out of the clamps because it was easier on a new bike being all freed up. But I guess if you put the boots in boiling water they might go over the bottom of them never tried but it’s worth a shot first .
@LioSintra3 жыл бұрын
Where did you buy the radiator guard? Can you send link please? Thank you
@dangas89663 жыл бұрын
www.ebay.co.uk/itm/For-HONDA-CB500F-CB500X-Grille-Protector-Grill-Guard-Radiator-Protective-/324549774835?_trksid=p2349624.m46890.l49286 there you go but hope this helps .
@grantgreenwood5223 жыл бұрын
Does this rad guard fir the 2021 model okay?
@dangas89663 жыл бұрын
@@grantgreenwood522 yes it fits very good 👍🏼
@grantgreenwood5223 жыл бұрын
Ta mate, just ordered one 👍
@dangas89663 жыл бұрын
@@grantgreenwood522 easy to fit as well 😄
@Lucan44.403 жыл бұрын
Hi can you give me details of your bash plate, been looking for one that fits with centre stand and engine bars. Many thanks..
Looks like you have the same hand guards and radiator shield as me! I currently have a rattle which I think is the shield vibrating against the radiator at the top. I fitted a tutoro chain oiler to mine and it has been fantastic - very simple to install and use. Just back from a week's tour round the Frozen North and the chain still looks mint. I am really impressed with this wee bike and cannot see why I would want anything bigger (and I used to ride a Tiger Sport and a Pan).
@dangas89663 жыл бұрын
Have you tried using double sided foam tape ? Arr a chain oiler iv got one of these on my cbr but not on the cb . I think it’s people wanting bigger and better bikes but if you haven’t owned one for at least a year you won’t under stand the cb is all you need.
@Superjet7013 жыл бұрын
Good review, try some 70/30 tyres next and do some light trails be interesting. Thinking of putting Shinkos on mine.
@dangas89663 жыл бұрын
Iv got stuff like that coming up 🤩. 21 routes planned I was thinking of them shinkos my self 🤩
@Superjet7013 жыл бұрын
Great stuff Dan, keep up the good work.
@dangas89663 жыл бұрын
@@Superjet701 thank you there’s a lot of stuff coming up soon 😁
@Superjet7013 жыл бұрын
You might also look at Bridgestone AX41. Getting great reviews also.
@rogerwilliams29023 жыл бұрын
The plane is a Dakota !.
@dangas89663 жыл бұрын
🤓 mint
@Brocklebury3 жыл бұрын
The serial WD413 is apparently registered as an Avro Anson www.bonhams.com/auctions/22725/lot/387/
@roviwoteap23753 жыл бұрын
Too small for a Dakota.
@rogerwilliams29023 жыл бұрын
@@Brocklebury Oops !. Certainly looked a bit like one.
@stanstevens62893 жыл бұрын
Puig.. Pweeg :)
@dangas89663 жыл бұрын
Pweeeeeeeg
@grantgreenwood5223 жыл бұрын
You seem to be the man to ask........ Any suggestions on a rear hugger for 2021 model?, not the powerbronze one though as it looks ugly lol.......
@dangas89663 жыл бұрын
Well there’s some out for the cb500x but don’t really like them but the puig is ok I guess looks the better one
@@dangas8966 I have bought that exact one mate and fitted it yesterday lol....., they do a good job of keeping the rear cleaner. Thanks for looking 👍
@dangas89663 жыл бұрын
@@grantgreenwood522 for the 2019 there arnt any good ones sept that one 😊 .
@spacecoasttactical3 жыл бұрын
Hand guards are crap, no backbone so when you drop the bike they are not going to protect your levers or hands, get Barkbusters. Crash guards are useless on this bike as they attach to an engine stress point and can make a drop even worse.
@helloworld1989bmz3 жыл бұрын
You have good quality content but your video makes me dizzy.