CCTV CAMERA FAULTS CAUSES & SOLUTIONS

[@tsunamiq]

Excellent video! Helped me fix my problem! Was a fuse

[@Tech_Inside_Out]

An glad its been useful

[@Edriss_1997]

Great video, Thank you

[@Tech_Inside_Out]

Glad you liked it!

[@gbolisco1]

Hi there, rhanks fornthe educational video. Pls i have this NVR wireless cctv camera (Zoohi) which does not show when i set up. The 2 camers doesn't seem to have power going to them when plugged in. Tnx

[@Tech_Inside_Out]

1.Please check and be sure you are feeding the cameras with the right power 2. Check your connections, check whether positive and negative terminals are correctly connected.

[@cktrading72]

Hi,may I know what type of electrical wire and number use for the DC power connection? Newbie

[@Tech_Inside_Out]

A 1.5mm, 2 core cable is ok

[@ibudeeghosa4910]

What about is NVR

[@Tech_Inside_Out]

Well noted, I will consider doing something on that.

[@josephcharlesosei9465]

My camera output is blare can you assist with the configuration to get a maximum output picture

[@Tech_Inside_Out]

Hello Joe, Blared video output could be caused by 1. Low voltage to cameras 2. The use of sub-standard cables 3. Poorly terminated cables and more ...., You may reach me by WhatsApp on [phone] for more discussions.

[@jetdean2024]

There a supply given but still no video display. When I use multitester using ohms in the vnc pos and neg the indicator well go up and down repeatedly. While the function one is steady. What is the problem with this? Help thanks

[@Tech_Inside_Out]

What voltage readings did you get when you checked the voltage to the camera? You will have to check your video cable terminations and be sure they are well done.

[@michaelmic7071]

Faults gotten from here a obtain from analog camera.what are the various fault gotten from an IP camera

[@Tech_Inside_Out]

I may have to do something on IP

[@jerry941]

hey bro can you please do a full tutorial on AxxonNext tnxs

[@Tech_Inside_Out]

Well noted Sir

[@okojiebenjamin7719]

Hello good evening There is current in the power cable and the video cable but the camera is still not working

[@Tech_Inside_Out]

1. Please check if the power delivered through the power cable is up to 12Volts 2. The video Terminations should be given a second look, ensuring that there is no cable bridges. 3. Also check to be sure if the camera is a working camera

[@carolhelenbell8527]

light is not working on one of my outdoor cctv cameras

[@Tech_Inside_Out]

Please check power to the camera

[@DeRoyalGoldtechnology]

how to in install telecom

[@Tech_Inside_Out]

I will get to that side soon

[@alfredmasiko1182]

Good

[@Tech_Inside_Out]

Thanks

[@aziagnonmondenou6083]

hi actually why JOVISION camera aren't in TOGO???

[@Tech_Inside_Out]

I believe the tutorial can serve as a guide to Install other brands other Jovision. I also have plans of doing videos for other popular brands in the near future so that it will be more comfortable for everyone.

[@aziagnonmondenou6083]

@@Tech_Inside_Out also how to set cctv camera with cable cat5e or CAT6 with Balun

[@junenesbitt7948]

My don't work go off line 😢

[@Tech_Inside_Out]

You would have to check your network. Either your Internet connection is not fluid or your network is congested.

[@JoanWangui-ft3ik]

My CCTV camera does not produce light

[@Tech_Inside_Out]

Hello Joan, Is it the power indicator light that is off? Was it formerly working? Please clarify the problem.