CD009 Auto to Manual Swap Is300 Drift Build, How well does it fit?

FOLLOW THE PROCESS OF SWAPPING A CD009 INTO AN IS300
IS300 DRIFT BUILD
FOLLOW MY INSTAGRAM: / k_bunz_
COLLINS PERFORMANCE COUPON CODE: KBUNZ
LIKE AND SUBSCRIBE FOR FUTURE CONTENT
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Music Credit:
13:13 - 18:30 minutes
Life by KV / kvmusicprod
Creative Commons - Attribution 4.0 International - CC BY 4.0
Free Download / Stream: bit.ly/2D1RuKy
Music promoted by Audio Library • Life - KV (No Copyrigh...
------------------------------
Music Credit:
13:12 - 15:28 minutes
Lovely by Amine Maxwell / aminemaxwell
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/lovely-a...
Music promoted by Audio Library • Lovely - Amine Maxwell...
------------------------------
Music By: LAKEY INSPIRED @ / lakeyinspired
Official "LAKEY INSPIRED" KZbin Channel HERE - www.youtube.co....
License for commercial use: Creative Commons Attribution 3.0 Unported "Share Alike" (CC BY-SA 3.0) License.
Full License HERE - creativecommon....
Music promoted by NCM goo.gl/fh3rEJ
0 - 13:11 minutes & 18:31 - 22:38 minutes
Music Credit:
►(1) 0:01 Better Days - LAKEY INSPIRED
-Individual Upload & Download HERE: www.youtube.co....
►(2) 3:10 Monroe - LAKEY INSPIRED
-Individual Upload & Download HERE: www.youtube.co....
►(3) 7:31 Watching The Clouds - LAKEY INSPIRED
-Individual Upload & Download HERE: www.youtube.co....
►(4) 11:10 Wonder - LAKEY INSPIRED
-Individual Upload & Download HERE: www.youtube.co....
►(5) 14:47 Distant - LAKEY INSPIRED
-Individual Upload & Download HERE: www.youtube.co....
►(6) 18:24 Fast Lane - LAKEY INSPIRED
-Individual Upload & Download HERE: www.youtube.co....
►(7) 21:08 A Walk On The Moon - LAKEY INSPIRED
-Individual Upload & Download HERE: www.youtube.co....
►(8) 23:42 Angels - LAKEY INSPIRED
-Individual Upload & Download HERE: www.youtube.co....
►(9) 27:59 5 Min Call - LAKEY INSPIRED
-Individual Upload & Download HERE: www.youtube.co....
►(10) 30:47 Last Night - LAKEY INSPIRED
-Individual Upload & Download HERE: www.youtube.co....

[@Touring_Low]

Dope vid. I noticed you never connected your reverse lights when u jumped the neutral safety wires. Reverse is wire 2 & 3 (blue and red wires) on that same plug u did the reverse. Just connect that to your CD009 trans reverse plug.

[@KBNZUS]

Thanks for the heads up!

[@DuMaMai]

Very satisfying watching this my dude. 💯👌🏻

[@pleasuretek]

Did you get a working gauge cluster as well? Outside of the cost of the car and the cd009, about what was the ballpark spent (not assuming labor). I've been researching either a cd009 or a good ol r154, but all the parts for an r154 swap really add up. Really sick is300, the nitrous boost got my attention for sure. Keep up the good work.

[@KBNZUS]

The Speedo will work on a factory auto car as it gets it speed from the wheel speed sensors, the manual cars I’ve heard get it from the manual trans. The Collins kit is gonna run you about $2300ish with my discount and assuming you order clutch and driveshaft and shifter from them. I had a 1j vvti before with a r154 and I prefer the gearing of the cd009 more atleast for drifting. Thanks for watching, The GTE swap will be coming soon

[@Toyota4Life]

I noticed you didn’t beat the transmission tunnel ? For clearance

[@KBNZUS]

I was able to fit it in without on this one. Using the factory bell housing helps a lot. On some cars I have had to hit near where the starter sits on the trans tunnel mostly when installing the trans for clearance not the final resting spot

[@gabrielzamora16]

Hey you unplugged a couple moduels from where the couch pedal is, did you ever reconnect them? Are they important?

[@nova0954]

wow the production is very nice beats are on point

[@bigjdm5460]

He a certified G for this one

[@thebearsblack]

Best Honda technician on KZbin! I'll come to you to auto swap my Miata!

[@RandTezza]

Thanks for making this video! It really helped out and motivated me to do my swap! Feels great to be shifting again!

[@drainis]

Did you source your own transmission?

[@RandTezza]

@@drainis Yes found one at my local junkyard.

[@BrowardWayD]

That was a bad ass video bro I learned a lot I can’t wait until I do mine

[@rogerapagan1955]

More uploads! Killing it Brent

[@elongatedcranium5403]

Any major wiring you have to do? Everything seems pretty straight forward.

[@Mr99gsrteg]

Im going to be ordering this kit and was wondering what your thoughts on the shifter are? im looking the swap kit shifter or the serial 9 unit.

[@KBNZUS]

I prefer the serial nine one, its a little more solid without the 3 piece design. everything else in the collins kit is perfect, check the description for a discount code

[@hopesndreamsperformance7617]

What clutch Master slave did you use that one was nice and small that you installed

[@kidicarus2637]

dude awesome fearless doings - thanks for sharing

[@scubagto420]

Did you even have to beat the tunnel to fit it In there ?

[@KBNZUS]

It helps to hit near the area the starter would be at

[@stevel3695]

Awesome content brotha! Quick question, did you have to plug the stock trans fluid lines, after you cut them?

[@KBNZUS]

Steve Laporte no I did not

[@lexusfan3309]

Definitely earned a sub this will help me so much

[@Luke_agnew]

I know this videos 2 years old but hopefully you’ll see this. What size extension is that on the shifter and do you remember the shifter thread pitch ?

[@KBNZUS]

10inch extension, 12x1.75 threads

[@blackcenturion4803]

is that the auto driveshaft u re-used? or howd did u get a new driveshaft?

[@KBNZUS]

No when you buy the kit it comes with a custom driveshaft

[@WarriorsPhoto]

Congratulations 🍾🎉🎊🎈. Now how does it drive? (:

[@11onejay]

Hey man what's going on? So I'm ready to buy a kit and as much hate as collin has been getting from the community I feel better buying this kit because he has done quite a few videos installing it in the is300 and it seems to have no issues. You too seem to have no had issues either. My question to you is what clutch are u using? That doesnt look like the one collins provides, and 2 how bad is the transmission hang? Dp you have to be extremely cautious driving around?

[@andrewvalencia6489]

I am very curious as well please respond

[@okistash3075]

I need a link to that swivel socket attachment sir pls n thank you to anyone who knows lol.

[@zachwebb3875]

Same LMAO did you ever find one if so can you send the link?

[@okistash3075]

@@zachwebb3875 nope

[@zachwebb3875]

@@okistash3075 damn😭

[@rolandocantero4044]

Greetings, could you tell me what wheel and what gum disc you used to do it, thanks in advance

[@andrewvalencia6489]

Driveshaft measurements for the a340 kit ?

[@psalm302]

I wish dude awesome

[@joseisaiasramirez4172]

You have much trouble getting it to fit? I’m looking to swap my auto. It’s just hard finding a w58 or 154. Thank you

[@KBNZUS]

It’s definitely a tighter fit, then a Toyota trans would be and sits lower. But I love the gearing much better then a r154

[@joseisaiasramirez4172]

Thanks bro

[@Touring_Low]

You can look into am AR5 swap too of u can't find W58/R154. I just did an AR5 swap yesterday, but never had time to do a Blog like this to show.

[@joseisaiasramirez4172]

BadassVTEC how was that?

[@Touring_Low]

@@joseisaiasramirez4172 Everything went smooth no issues. Just make sure u piece the right parts together.

[@DatMuslimDad]

Your coupon code doesn't work

[@KBNZUS]

I will reach out to them it may have expired by now

[@andrewvalencia6489]

Hopefully you can get a new one lol I was trying to use it

[@KBNZUS]

Coupon code is back up

[@11onejay]

Hey man I was wondering did u have an excessive noise from the transmission? I've been told that u will for sure hear some stuff going to the single mass flywheel but I've seen some guys have really bad noise when in gear or the clutch pushed in or out.

[@RandTezza]

You will hear some Gear lash in the transmission caused by the lightweight single mass flywheel. For me I only hear it when the idle is low or when the clutch is not pressed in.

[@damianleyva1510]

is that the short shifter that they advertise when buying the kit?

[@KBNZUS]

damian leyva yes it is

[@renzosartor2110]

Which kit? :(

[@KBNZUS]

Collins performance a340 kit

[@Issa_3hunna]

I know you’re boosted now but what was the gear ratio you used for the diff and how did it handle .. I have a tripod w58 and the gears are too long for stock power for my liking

[@KBNZUS]

I had an auto 3.9 but gears are short with Cd009. You can try an FRS diff it’s 4.1

[@Issa_3hunna]

@@KBNZUS for stock power the 3.9 should be more ideal right? And also no hammering of the tunnel ?

[@I.S_Lombrana]

You sir good yourself a subscriber

[@jerryespineli1592]

Hey Kevin, looking for a shop and a great mechanic for my IS300. I was wondering if you could help me out to achieve my goals, auto to manual swap! (Help)😩

[@jackythao4971]

Following

[@itsreallytheo]

How’s this kit been holding up? cause I’ve heard quality wise it’s inconsistent

[@KBNZUS]

4 years going strong, no problems with the kit itself. Just installed another one on my sc400. Video should be out soon

[@triotrio1000ify]

Hey bro! Great video. Quick question, would you happen to know what type of clutch the Collin’s kit takes? I purchased one without a clutch because I had a south bend clutch from a buddy who used to have a 350z. I messaged Bette and he said he wasn’t certain it would work and pointed me toward buying a clutch off of his website... I have an 02 auto is300 that I’m swapping a JK4X transmission into. Appreciate it!

[@RandTezza]

I just purchased my kit and the Clutch that Brett provides is from a Local company from Florida. Tampa clutch supply Inc.

[@RandTezza]

Also i believe you can use any 350Z clutch kit with the A340 kit.

[@triotrio1000ify]

Randy Maganis Sweet! Appreciate it!

[@andrewvalencia6489]

Please let me know what year clutch you used

[@KBNZUS]

order a clutch for a early model g35/350z

[@Radbmxoldschool8090]

hello..what this car is new trasmition? i am spain and have got this proyect ..thanks

[@matloy470]

CD009

[@homelee4853]

Where can I get your Shift mechanism？

[@khuubat8678]

Diff ratio pls?

[@makanaaskew9580]

You know what wheels those are?

[@KBNZUS]

Work T7R

[@baycitie]

did u use ure stock is300 flywheel if so how was the idle chatter

[@KBNZUS]

Used the Collins flywheel

[@sethormeroid2687]

What diff you running? Is it the 3.9 or whatever that's in the autos? I ran a cd009 in my sc300 with a sc430 3.26 diff but thought it may be too steep for this and not a lot of swap options still for diffs.

[@KBNZUS]

Yea I run a 3.9, recently found that the is250 looks to be a direct swap in and is a 3.7

[@sethormeroid2687]

@@KBNZUS is the 3.9 hard to drive or is it bearable? I loved the 3.26, it was welded.

[@KBNZUS]

For drifting not so much, but I think I’m gonna try the 3.7 to see if it’s any better

[@sethormeroid2687]

@@KBNZUS i have an ar5 but I may just go back to the cd009. These toyota trans are not all that great haha.

[@kevinperez8987]

Where did you source the brake pedal? Im looking to do the same swap on my car but idk if I should stick with AT brake pedal.

[@KBNZUS]

I ordered mine from the Lexus dealer

[@kevinperez8987]

K_Bunz Do you have the part numbers?

[@KBNZUS]

Kevin Perez I can get them tomorrow at work

[@kevinperez8987]

K_Bunz Whenever you get the chance broo, it would be greatly appreciated!

[@ahs9583]

Do u need some extra parts to make it fit? Pls can u tell me what parts they are cuz I wanna do the same swap in my is300.

[@KBNZUS]

nothing extra if you order the whole kit from collins performance

[@ahs9583]

K_Bunz oh thanks and how much did it cost u?

[@11onejay]

Also where did u get ur pedals?

[@octagon_009]

Dealers

[@damianleyva1510]

did you have to modify/beat in under the car (the tunnel) in order for the cd009 to fit?

[@KBNZUS]

damian leyva I did not, but I’ve heard some people have. So I don’t think it would hurt

[@damianleyva1510]

@@KBNZUS how are you enjoying the trans so far. Would you recommend, or go for another trans?

[@Steven0Roldan]

Great video. Since u didn't modify the tunnel after driving it are u having any clearance issues? Noises?

[@KBNZUS]

Slight noises nothing crazy, but it is a drift car so I’m not concerned of it being a daily

[@ham003latechedu]

I was the first guy to post an attempt and pics. Mines was a manual, I believe the auto has more tunnel. I now have a ar5 and even then had to massage the tunnel a little to get a 0 degree driveshaft fit.

[@tawidave7092]

What auto was that? Was it A340E? What pedal setup did you use? I'm slowly getting the parts to do this in my 94 Aristo. CD009 Trans is here. Fisch racing adapter on it's way etc. Would have been awesome to see something more in-depth.

[@KBNZUS]

Yea it was, the factory is300 Manual pedals, thought about making it more detailed but liked how it was and would have been too long explaining everything. Feel free to ask me any questions tho

[@tawidave7092]

@@KBNZUS Appreciate the response, and forgive me for the following lol I noticed you cut the cooler lines etc. Did you end up using a different system, or did you run new lines, or does this trans not need a cooler? How did you get the reverse lights and speedo to work? Sorry if I'm turning your comment section into a forum lol. There's not much info out there for my swap, and most of it is very limited.

[@KBNZUS]

Tawi Dave the auto is300 uses the wheel speed sensors for speed signal unlike the manual using the transmission. So that all worked. The manual trans does not need a cooler. Being a drift car I did not wire in reverse lights but it would not be hard to wire the cd009 reverse switch to the oem plug