not so expensive any more. Great job! Your car is easily worth double what you paid now.
@bmxriderforlife12342 жыл бұрын
For engine building. One thing to keep in mind especially if you're wanting to raise red line and also run sustained redline. Liston speed. You want to keep it around 4500 feet per minute for an engine designed for reliability even with some forged pistons and rods.
@jicez66494 жыл бұрын
Great video! I have the frs y38 torsen lsd differential in my is300 and definitely made it a little quicker off the line. I don't know when but the 86 did switch to a y58 differential which I believe has even shorter gearing. I'm about to do an ar5 swap in my is300 so these last couple of videos are getting me excited for that. I also picked up a Toyota 86 so I will be sticking around for those videos now as well, keep up the great content!
@jasonlazo50164 жыл бұрын
Thanks for the kinda words. You’ll have to let me know how the ar5 setup is! I have a little seat time with the r154 but I wasn’t too impressed with the shift feel so I always wondered about the ar5. Hope my frs is worth the hype for me lol should get it back within the next week or so
@Bellgrande4 жыл бұрын
How much did it cost to do the diff swap, I wanna do it too. And is it a direct swap or do you need to modify stuff?
@Bellgrande4 жыл бұрын
Yeah I wanna swap out my diff too
@ramialshami14 жыл бұрын
Where can I find clutch pedal for the is300
@jasonlazo50164 жыл бұрын
If you get lucky you can find one on eBay or is300 Facebook groups. I think xcessive manufacturing sellers a clutch pedal for the is300 but I don’t believe it’s oem if that matters to you
@DT-ku9co4 жыл бұрын
How come you didn’t swap the steering wheel?
@jasonlazo50164 жыл бұрын
The manual steering wheels was pretty beat up so I didn’t think it was worth it
@PeriodCorrect4 жыл бұрын
You should swap the wheels from the donor car!!
@lelandcoberley87234 жыл бұрын
I manual swapped my gs and the only code is saftey switch I did run the two wires up to the pedal and it works perfect I'd like to get rid of that P1780 CODE. Any ideas?
@jasonlazo50164 жыл бұрын
Not sure on that one. Once I swapped to a manual ecu all the transmission codes went away ( If I remember correctly it was somewhere in the neighborhood of 9 transmission related codes)
@AnthonyLivesTwice4 жыл бұрын
Don’t forget to pull all the fuses
@jasonlazo50164 жыл бұрын
Wait, what fuses?
@emanuelmobley37974 жыл бұрын
What clutch kit and flywheel would you recommend when doing this swap I’m currently getting ready to swap my 03 and all I need is a clutch kit and a flywheel and shortened bolts any recommendations?
@jasonlazo50164 жыл бұрын
People tend to stray with the factory dual mass flywheel. I’ve heard great things about fidanza flywheels although a little expensive. As far as clutches I’ve had good experiences with ACT and Spec clutches
@kevinsamayoa45572 жыл бұрын
@@jasonlazo5016 can a manuel swap be done on the 2001 Lexus Is300 2jz-ge or would I need to make it a 2jz-gTe before swapping it or??
@dbstherollers81062 жыл бұрын
@@kevinsamayoa4557 I just did this to my stock 2001 Is 300 you don’t have to swap the engine you can keep the 2jz-GE in it, it would be far less expensive and you would be able to get used to your car before you do anything crazy and if you want you can find a to 2jzgte head and put it on the 2jz-GE to turbo it the only weak point from doing that would be the rods I made 410 to the wheels on 13 psi with the stock GE bottom end and a stock head from a 2jzGTE I turned up the boost to 15 pounds and a rod literally flew out my engine 😫
@eyesofdarkness8528 Жыл бұрын
Love the color
@patrickfarris5494 жыл бұрын
Do you have a check engine light from using the auto Ecu?
@jasonlazo50164 жыл бұрын
Yes! I had like 10 or so codes relating the auto tranny, I slapped a manual ecu and I am down to 1 code which can be fixed
@supershadow2304 жыл бұрын
Jason Lazo what code are you missing ?
@Abegon024 жыл бұрын
Did you have a auto lsd?
@Abegon024 жыл бұрын
I’m looking for some parts for my 02 is300 id be interested
@jasonlazo50164 жыл бұрын
I do, it did whine when I took it out and some metal shavings were found at the drain plug. I’d sell it for dirty cheap. Message me on Instagram @jasonlazo if interested
@itsreallytheo4 жыл бұрын
3600 id source a manual
@supershadow2304 жыл бұрын
Exhaust set up?
@jasonlazo50164 жыл бұрын
Greddy Evo II exhaust with resonator delete. Stock header. A bit too loud for my taste to be honest but drone is not terrible