CD4011 | 2 Input NAND Gate IC 4011 | Digital Electronics

In this video, I've explained NAND gate Logic IC CD4011 with its truth table on the breadboard, and explained its pin diagram.
If you want to know more about the switch which is used in this video, then please watch this video:
• How to use 6 pins 8x8 ...
Digital Electronics videos (Logic gates, number systems, flip-flop, counters):
• Digital Electronics Th...
-----------------------------------------------------------------------------------------------------------
Other video:
Amazing Idea Using RGB LED, video link:
• Bluetooth controlled R...
How to make mini amplifier at home, video link:
• How To Make Mini Ampli...
-----------------------------------------------------------------------------------------------------------
Required Components:
IC: CD4011B x 1
Resistors: 220 Ω x 3
Miscellaneous: LED x 3
SPST Switch x 2
---------------------------------------------------------------------------------
Facebook:
/ digital.debajyoti
Instagram:
user name: digital.debajyoti
Link:
/ digital.debajyoti
------------------------------------------------------------------------------------------------
You want to support me to make more videos?
Support me through Patreon-
/ debajyotinath
Support me through PayPal-
www.paypal.com/paypalme/SanuD...

[@paulolemosmessias9460]

Gate nand gate. Excellent. I Liked

[@xmenken1]

A simple and great explanation of NAND gate logic IC.

[@dixond.villanuevad.5741]

Thanks from Maracaibo, Venezuela. 👍

[@mohit_rohilla_]

very calmly n nicely explain.

[@canalxadrezandrebk5401]

excelente informação

[@wbjaguar]

Thank you. 💚

[@JainugS]

Very nice video.

[@EEWave]

Thank you very much!

[@ThePhobosAnomally]

Hello. Can I use 1 microFarad capacitor for debouncing? Thank you.

[@happyhippo2767]

Chemical engineer here, so I apologize if my question is stupid. Wouldn't an LED be drawing too much current from the CD4011 output? It looks like it would be 22 mA (5/220) but the data sheet for the chip says output current max is like 1 mA.

[@sourishghosh4628]

LED's can glow even par it's max current rating but not too high like a 20mA rated LED can handle 30mA but definitely not 1A resistors are used accordingly I see no problem here

[@tomgrow2950]

Hi How do I contact you

[@user-fx4ei3sb5v]

Very good video, thank you! But what the difference between cd4011 and cd4093 ? Thanks!

[@EEWave]

CD4011 is just a NAND gate, but CD4093 is Schmitt Trigger NAND Gate.

[@user-fx4ei3sb5v]

​@@EEWave Thank you for the answer! Excuse me for my incompetence, I assume that the trigger fixes - as if it remembers the state, and cd4011 - just keeps the level while the signal is coming?

[@dhevarashettysindhu8137]

Materials description plz

[@margeyblake9832]

why am i not getting mine to work i literallt have followed every step and gone over it i dont know how many times. My switches dont do anything at all !

[@paulolemosmessias9460]

Fake components

[@sourishghosh4628]

4011 vs 7400 both are NAND but different family, which one is better ?

[@EEWave]

It depends on where to use. 4011 has larger voltage range, +3v to +18v. Consume low power. 7400 needs +5v, Faster than 4011, Consume more power than 4011.

[@sourishghosh4628]

@@EEWave I just want to light up some LEDs maybe 7segment displays or LED matrixes or maybe small scale graphics or something for my LCD display primarily for understanding logic gates suggest me can you ? I am looking for logic gates, multiplex/demultiplex, counters, shift registors etc is there any edge of 74XX over 4XXX or vice versa accordingly