Central Machinery 1500 w Steamer Kit. (From Harbor Freight) Review and Demonstration

[@rotorr22]

I knew that this was not as good as the 1275, but I only paid $75 for it with a 25% off coupon. I don't use them often, so for the price, it works. Not a commercial unit by any means, but ok for infrequent use.

[@apexdetail85]

Indeed... in my area.. its the only unit that can be purchased and taken home same day. It got me through in a pinch, so I was thankful.

[@LoveLikeaHurricane]

Harbor freight used to sell the McCulloch 1275... Should of grabbed it when I had the chance!

[@bradjohnson9671]

I picked up this exact unit last week. I returned it yesterday.. Why? Worked fine for 30-40 seconds at a time. Then had to wait for the steam generator to heat up again and wait for the red light to go out. So work for 30 sec or so, wait 60-90 seconds and do it again and again. The inside of my tank had lots of junk in it. I emptied the tank before returning it, lots of white powder residue came out. I only did 3 refills of the tank with distilled water so basically went through 2 tanks. When buying a steam cleaner make sure to check the "cycle" time. They say you can run for 40 minutes or so but that is NOT continuous.

[@BeccaTheWreckahhh]

“Distilled water only” *proceeds to pour spring water into tank*

[@danielwozniak7421]

if son added water will it kill the device

[@csteward2194]

Thanks for the review and Demo, for my small jobs on the house, shed & barn this will work out perfectly!

[@406yota]

I bought this today and can honestly say it works good just gotta make sure you pre spray cuz a little water doesn’t come out before steam

[@m2useinu]

Thank you for the video. Amazon will have the McCullough to me tomorrow. You saved me the disappointment of buying the harbor freight

[@capstake8788]

Brian thanks for making precise and honest reviews, your videos are teaching me a lot.

[@dare2scheme904]

Spring water isn't exactly distilled. It is often initial distilled, but then "mineral" salts are added

[@watsonspuzzle]

I bought one of these for home use and it works fine for that but definitely wouldn't recommend for heavy use in a car detailing business.

[@apexdetail85]

I took 2 back that stopped emitting steam. One the wheel broke off. But I needed in a pinch. Kinda the only unit you can buy and take home that day in my area.☹️

[@kevinkleinhenz6511]

Mine stopped emitting steam after two weeks. Not sure if something is clogged. It appears it is heating up but when I squeeze handle nothing happens. Guess I’m taking this one back. It’s a shame because it worked pretty good.

[@watsonspuzzle]

@@kevinkleinhenz6511 Thought I'd come back to say I went through 3 of these machines in less than a year. I switched to the Dupray line of cleaners. I had one of the Central Machinery die on me in 2 weeks, also. Such a rip-off.

[@kevinkleinhenz6511]

@@watsonspuzzle Well I suppose we get what we pay for. Harbor Freight exchanged it with no problem so that was a plus but if this one tanks I will get a refund and try another brand.

[@therealfrazier]

I’m reading these as I await for mine to arrive 😢

[@buddhaartsprech3r885]

Thanks for the honest review . I still may go with the harbor freight model . I know the 1275 is better and you get what you pay for . But i will only be using this maybe a couple times and i have a coupon lol. I think my elbow grease can make up the difference and save me about 60 bucks. At least for now . ( i will still try to get the 1275 if possible ) thanks . Honestly it looks like it works pretty good . Come on cheap decent tools same day ? I too am grateful

[@apexdetail85]

Sadly its the only steamer that can be purchased and taken home the same day... in my area, anyway. Yeah.. if you seldom use it. It may work for you. I had my unit broken in no time however. Now buried in a corner somewhere.

[@406yota]

Whats the 1275 i just got into the steam cleaners

[@MarsRed]

Nice video, very helpful. I just got one of those steamers. Is the jet nozzle and little brush attachments suppose to be angled a bit? Or did mine come like that? Thank you.

[@tihzho]

3:19 "Distilled water only" then fills the tank with spring water. Spring water is water that has been filtered to remove impurities, but the minerals are not removed from the water.

[@johnstuckey2723]

Brought this one this morning, Produces a lot of hot steam and pressure. I can not use this unit, it leaks too bad at handgun with water and steam. Not able to hold on to. A SAFETY HAZARD FOR BURNING YOUR HANDS!!!!!!

[@kellymccloskey6882]

Thanks 👏I've had mine for a bit,& really didn't know how to utilize,all the attachments,😁👍🍀

[@avaldovinos77]

Good video , I was hoping to see before and after pics of. What you cleaned. God bless

[@wakeup1327]

Dont know what your talking about. This machine is great!!

[@kdog3495]

I guess your store finally ran out of the McCullough 1275. Thanks for the review and glad I went with the 1275.

[@apexdetail85]

kdog3495 😂. I should have anticipated that and snatched up the remaining few! I ordered the McCulloch 1385 which has a 64 oz reservoir.

[@kdog3495]

Apex Detail let us know if you see any major benefits to the 1385 other than capacity. The higher end models looked to have better build quality, but the 1275 is great for a weekend warrior like myself.

[@apexdetail85]

kdog3495 The 1275 is 👌🏻. I dont want more heat or pressure than that. A longer time period between refills would be nice though. I will do a vid on it after a few uses 👍🏻

[@quinones355]

Apex Detail please make a video of the 1385

[@kingpremo5207]

any slammin deals on the 1275?! rn like 140$ (2/28/19)

[@dennyg1111]

Wouldn’t this steamer delaminate the door panel? And using a scrubbing pad on it compromise the finish. I was really surprised to see that.

[@tonywhite5085]

Because you dont use thoes attachments on that typ of surface use the attachment with the cloth.

[@Daniel-bh4px]

Quick question! So when you were steaming the carpets and it was getting clean how do you remove the old loose dirt/contamination? Or do you just steam and leave it to dry?

[@apexdetail85]

Follow up with thorough vac.

[@Fine_art_aerial]

So this thing doesn't suck (no vac)?? What is the purpose of doing carpets with this if it doesn't suck?? Just curious, new to detailing

[@RichSPK]

So, using steam on switches and speakers is a non issue? Do you follow up the steam with a wet dry vac?

[@lucci11212]

I’ve bought one and had to return it twice I use it a couple times and it just doesn’t work. Any idea why? I am using the distilled water but it’s like the steam isn’t going through the hose

[@jimtalbott9535]

I just picked up a Mccullough 1375, and was thinking about this mode at Horrid Freight - glad now, after watching this, that I went with the 1375!

[@AnyHouseCleaning]

Love it. I use it a lot

[@cardonadarlene4650]

How long can u ise it before the red buttons comes on because i bought one jesterday ..and i wait both buttons then the red goes i start cleaning then i can only steam for like 30 sec or a min and then red come on and i have to wait like 2 or 3mins..or more to restar steaming is annoying...i dont understands stand ...is like it take for ever to steam a lil bathrooms

[@MrSonlight]

Just got one and it leaks hot water from the peice that attaches to the gun. Is that normal?

[@anthonygonzalez1147]

Did anyone elses cap get stuck. It just twist and twist but the cap never comes off

[@maemaenakamura3603]

My steamer is working. The ligth still comes on and it sounds like it want to works.

[@matteliano454]

Says fill with distilled water. Fills with spring water.

[@tonywhite5085]

This is a really good steamer but the o rings and the fittings suck go out and get you new fitting and o rings and it will work alot better

[@paulinafelix97]

Would this be good to use to clean a mattress with ? I have a 2 year old and spills milk all over ):

[@artesyamoore]

Can you add any cleaning products or essential oils to the water? Also, can I steam my walls with this?

[@100GTAGUY]

Essential oils perhaps if diluted a bit more than recommended (heat tends to make aromatic compounds much more pronounced). And then flush out the tank and lines to remove any residue which may form and clog things. However i would absolutely not recommend putting any chemical cleaning agents into a steamer, unless recommended by the steamer manufacturer and only if you have the required ppe to use said chemicals in such a manner as per the chemical manufacturers warnings. Some of that stuff you dont want to breathe at room temp, let alone in a vaporized and heated form. The industrial solvent vapor cleaners ive seen used in aviation maintenance for regular (but heavy) cleaning requires chemical resistant full body suits, and SCBAs and or respirators rated for the chemicals.

[@BigRigRich]

Will it clean a headliner?

[@sandythornton6562]

I have tried to clean with water and vinegar steam still won't come out I waited 15 minutes still no steam any ideas

[@erickporsche417]

"Yea , uuuuh , I'll take 2, uhh thanks for the video, uuuh and thanks for the information " ^

[@TeddyDub17]

I call bs on this😂 I use it everyday detailing cars and I’m already a year strong with it

[@DeliDel215]

I just bought one for my Detailing business bro, have yet to use it yet though. I’m glad that it works for you 💪🏾.

[@DreamRoadRonny]

mine broke day 1 lol. yesterday.

[@TeddyDub17]

Ronny B did you use it right lol mine still strong

[@DreamRoadRonny]

Mystic Mine was perfectly fine for 1 car and then it became too hot to the touch and I couldn’t even use it. Gave it plenty of time to “cool off”. If I had to guess the thermostatic switch broke. I’ve been reading reviews for months before I got this and every review states either 1. it’s perfectly fine or 2. it breaks the first day.

[@JamesPeeBIRD3rd]

Pretty delicate fabrics in the Chrysler town n country's of the mid 2000's vintage aye?

[@brianarnett7479]

Would this work well on a rubber penny round floor?

[@williammercer394]

really like your videos, lots of helpful information.

[@apexdetail85]

Good to hear William! Glad you're part of the family. Make yourself at home... more videos to come!

[@watsonspuzzle]

Apex Detail, can you use the attachments from the McCulloch on the Central Machinery cleaner? Sadly, I see no way to get replacement heads or tips for this machine. ...sigh...

[@apexdetail85]

Unfortunately no. I tried. That thing is so disappointing... I have it buried in a corner somewhere.

[@watsonspuzzle]

Shoot. That's what I was afraid of. Proprietary and no way to get replacement parts. I guess I'll just use this until it breaks down and replace it with a McCulloch. No wonder Harbor Freight had this on clearance. Thanks for letting me know.

[@apexdetail85]

And sadly... its the only one in my area that can be purchased and taken home same day in a pinch😦

[@metalkingtohorses]

I appreciate the honest review nice video, I was going to just use it in my home to clean , not detail cars all day do you still think I should get the McCulloch MC 1275

[@apexdetail85]

I do ...this Central Machinery unit I can not recommend.

[@metalkingtohorses]

thank you

[@robertbarba3948]

I know this video is old and you probably won’t respond but I need help, after about 3-5 minutes of steaming it will supper and no steam will come out and the red light will turn. Is this normal?

[@johnemmel8220]

I got this because I needed it and it was on sale and I paid under 100 it's does the job but not going to last long after one car the triangle brush has flattened out. I had a micro fiber wrapped around it and wasn't scrubbing hard wtf. But it will work in a pinch. Cheers John @Carefree Auto Detailing

[@apexdetail85]

John Emmel You said it John.... its one of the few you can go right out and buy off the shelf when you need one

[@johnemmel8220]

saved my butt on Sunday with two vehicles that were hammered. Running out now still very busy I haven't forgotten ya I'll call or msg in a few weeks about the link ya sent good luck in new place

[@apexdetail85]

Sounds good... be safe out there

[@marioestrada50]

John Emmel on

[@1uniquez]

what is the biggest Disadvantage this has vs the 1275 ? I was gonna get this model last week it was on sale. but missed the sale. is any difference in power / steaming ?

[@mikeyp2447]

1uniquez The pressure is slightly weaker and the plastic its made of is brittle

[@apexdetail85]

1uniquez 👆🏻

[@1uniquez]

Brian Spitler ok thanks

[@apexdetail85]

1uniquez Its a good thing you missed the sale. Order the 1275 my friend 👍🏻

[@1uniquez]

Apex Detail yea I think I'm gonna go the 1275 route. lol thanks

[@mariomaldonado8927]

Bro hoy compre una y no pude hacer q tirara vapor saludos desde Honduras espero me ayudes por fa

[@eyekeepsitreal684]

Are the Central Machinery attachments interchangeable/compatible with the McCulloch stuff? Where can you.get replacement parts?

[@apexdetail85]

Not compatible at all unfortunately. McCulloch has them right here👉🏻www.mccullochsteam.com/accessories

[@reefjunkie9018]

Do you think one of these could remove acrylic paint from a vinyl seat?

[@ameyers67]

Try denatured alcohol. It will dissolve the paint, but not hurt the seats.

[@briancreech2995]

Cannot get the steam come out of the hose after using it twice

[@IAmKidLightning28]

Thanks... I ordered the 1385 today, and I was at Harbor Freight thinking of buying this one... THANK GOD I DIDNT!!!

[@apexdetail85]

Brendan Montenegro Glad you waited...you will enjoy the 1385👍🏻

[@chuckjeffcoat483]

I did purchase, going back today. Inferior at best. Does not get the job done even when using a degreaser before steaming.

[@scottnyc6572]

If it operated like a vacuum and steam cleaner in one that would be awesome.

[@FlorinS2011]

Motor area, engine? Had you tried?

[@somepwnguy]

That's what I wanna know

[@reymondrm1828]

ese maquina se utiliza con agua ?

[@juancelis6046]

I’m gonna buy one and make some money on the side thank you for your video it helped a lot

[@OldSchoolNoe]

Any recommendations?

[@skynet7662]

Big brand snob and you sub snobs. But you still shop at Harbor Freight.

[@AdamPierman]

Most overlooked comment fr

[@platonkavvadias8541]

Do you let it air dry or you use wet vac?

[@johnpatterson7522]

I just bought this for $89 at HF parking lot sale.

[@57Carlibra]

thanks for the video, well done

[@slagletoby]

Good review and thanks.... with alien porn music.

[@tank_games8052]

My machine started to leak water and wouldn’t stop heating up

[@billjones6830]

thanks was just looking at them today and wondering if they were worth it

[@apexdetail85]

bill jones They are very disappointing!! Go in a different direction. Vapamore, McCulloch, Eurosteam, Dupray. Anything but Central.

[@billjones6830]

bought a McCulloch 1375 worked great

[@apexdetail85]

Great choice Bill!! I love mine!

[@christchickconversations]

Thx u for posting

[@Scottstunts]

That steam is going to get into all those electrical connections and cause issues.

[@HomemadeLemonade]

Anyone know how to get off the water cap? Just keeps unscrewing but wont release

[@waterloo123100]

I have the same problem 😂

[@HomemadeLemonade]

@@waterloo123100 its unreliable i bought a mcclough instead

[@waterloo123100]

@@HomemadeLemonade that sucks dude. I ended up getting my cap off with Makita Impact wrench but I had to wait like 5 hours. Not impressed with it.

[@chuckthephuck13]

Same issue I’m having right now 😒

[@michaelnieves6632]

awesome, it looks like it did a great job lol

[@kuddleluv]

You didn't give a reason why you don't recommend.

[@Pedroluvslupe]

Where is the link?

[@coyote5.046]

What song is this playing

[@JP_Cesar_91]

This one is $99 right now or should I just get the 1275 McCulloch I want to slowly get my detail equipment will this be fine for starting out? Please I need your opinion lol

[@mysticvalley2003]

I bought one and its going back! Yes it makes steam, but so doesn't a cloths iron. Another important note. Never open the reservoir once the water is heated. The pressure in their is comparable to that of a radiator in a car and can scald you. On a final note I've been in the building business for 40 years and have used countless pieces of heavy equipment and tools and this steam cleaner is a waste of money. For anyone to say its worth buying I have to wonder why.

[@dwilliams8002]

I had mine for three weeks only used it twice the water/steam would not come out thru the hose, I returned it only for them to give me a store credit. 😡

[@100GTAGUY]

I initially was looking at these for generic DIY vehicle detailing and some household cleaning, mainly because of the price point and amount of use i estimated id give it. However upon watching some reviews i may spring for a Mccolluch for longevity and qualitys sake, and heck ive been looking to maybe start my own business and detailing seems up my alley and lucrative locally. Most people near me who do deatil vehicles only detail cars, but im considering boats and aircraft too. By offering detailing services to the kind of clientele that can afford to operate marine vessels and aircraft, i may even be able to offer better pricing for my automotive clients.

[@254JROCK]

Do you have an R. O. Water mach in the shop

[@apexdetail85]

I just have an Apec 75GPD

[@robertlotus6536]

You said you didn't recommend it, but not why. No specific details.

[@charleslane2735]

that doesn't look like distilled water.I mean unless you made your own distilled water I can't tell

[@apexdetail85]

What I used was purified... even better. Reversed osmosis is better than distillation. Especially for steamers and making them last

[@jaredb2142]

you want distilled. there is no purer water than that. spring water has some of the highest TDS (total dissolved solids) of any water. in the boiling chamber those dissolved solids will be left behind as the water vaporizes which will bring an early death to your steamer. you can test this out. fill 2 pots on the stove. one with spring water and the other with distilled and heat until all water is gone. you will be shocked to see what sludge is left behind by the "purified spring water". Distilled water has a reading of 0 ppm on the TDS meter. spring water will vary from 200 - 300 ppm. Reverse osmosis will not remove all of the sediment either. much better than spring water however. this is the reason you are having to replace your steamers. they build up with sludge and mineral deposits and they no longer perform. this goes for anything that requires water. including humans. 10 years of drinking distilled water here. good video though.

[@waterloo123100]

@@jaredb2142 Deionized is the best to use.

[@emsman59]

Spring H2o is not distilled.

[@maniacalmonster2293]

well why can't you recommend it you didn't really tell us anything at all. it looks like it did just fine

[@mariocampos3165]

Gracias x este video

[@buckstopshere7305]

Spring water is not the same as distilled fyi A matter of fact spring water is VERY HARD and will ruin your steamer

[@chuckjeffcoat483]

Purchased at Harbor freight, used it one time, going back today. Doesn't do the simple jobs. I don't recommend this product. The attachments are inferior at best.

[@sushigaming101]

Is it powerful enough for an engine bay?

[@apexdetail85]

Unfortunately... no. Unless you have 3 hours to do it.

[@sushigaming101]

Apex Detail OK. Looks great for interior detailing though!

[@apexdetail85]

Show Me The Best If the plastic hold up, sure... but 3 pieces of plastic around the unit have cracked or have completely broken off. Best of luck.🤞🏻

[@michelleseeds4918]

Thanks for the question and the replies!! I bought this unit and was wondering the same. If I can use it for basic detail and for an engine bay, that would be great. If I have to spend the extra time, I will. Hopefully it does work. For an older '89 Bronco II that has all sorts of mess in, around and under... lol I have a pressure washer, but no thanks to water around senstive parts/electrical.

[@CarlosSanchez-md5ci]

Your saying its waste if money?

[@apexdetail85]

Its no good...this is the one to look intowww.amazon.com/gp/search?ie=UTF8&tag=apexdetail-20&linkCode=ur2&linkId=9a8d399d722fa10c1df554ac77efae4e&camp=1789&creative=9325&index=automotive&keywords=McCulloch%201385%20steam%20cleaner

[@ng-iq4kx]

McCullough steamers work but cheap made, don't last, no support no parts. Vapamore primo or reliable brio or karcher sc 5 better.

[@RaysUserName]

Just found one for 10bucks on Facebook marketplace

[@Boodieman72]

These cheap machines aren't very good for car detailing. Sure they work but they just aren't powerful enough and they aren't very durable. If you are only detailing your own car or families car it would be ok. Still, it's better than using a whole bunch of chemicals and scrubbing it yourself.

[@nickster686]

Mine is only steaming for like 15 seconds, then it has to reheat!?!? Am I doing something wrong?

[@apexdetail85]

Take it back Nic. I went through 3 of them. Best to save for the McCulloch 1275www.amazon.com/s/?ie=UTF8&keywords=mcculloch+1275&tag=hydsma-20&index=aps&hvadid=194011445008&hvpos=1t2&hvnetw=g&hvrand=12238697288003799764&hvpone=&hvptwo=&hvqmt=e&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9007443&hvtargid=kwd-297128369989&ref=pd_sl_ks8a3smpm_e&gclid=Cj0KEQjwg47KBRDk7LSu4LTD8eEBEiQAO4O6r65fJbW7oJwK8GXoN286EQ0YjwFy_5-1DoOB2kFhgzEaAm0e8P8HAQ

[@nickster686]

Apex Detail will they give me my money back? I have the receipt but I didn't buy the warranty

[@apexdetail85]

I think you have 30 or 60 days. Without the extra 1-2 year warranty

[@nickster686]

Apex Detail oh awesome! I thought after using it I was stuck with it. Thank you for the info and replying back! Keep up the great video. God Bless. I've been planning on buying the 1275 just got in a pinch and didn't have the extra cash.

[@apexdetail85]

Thats how I got stuck with one! Lol. I needed one in a pinch, and it's really the only steam cleaner in my area that can be purchased and taken home immediately.

[@alaury13]

What’s with the Vintage Porn music in the background 😂😂🤓🤦🏽‍♂️

[@notcharles]

Why demo it on a clean vehicle? You uy these things to clean dirty vehicles, no?

[@dellagertler]

This is a safety Hazard this machine Top portion of the main cap Blow off flew in to the air and burned my thumb. Thumb 👎

[@heavenisposion]

But why can't you recommend it. You didn't elaborate on anything soooo thumbs down on this video

[@peteroc82]

I have one and it works well everyone has their own opinions but it’s works just as well as any other steamer you just have to know how to use it