Central Pneumatic 18 guage 2 in 1 Air Nailer/Stapler Review

[@kebo57]

Thanks, good review! I bought one 3 weeks ago to use at my mom's house, we're doing some renovations there to get it ready to sell. We put some 1/4" luan down in the hall bath to get it ready for new linoleum. I used 3/4" long crown staples and it worked very well at 50psi. The crown of the staples were just flush with the board. At higher PSI it starts pushing the staple too far into the wood leaving small divots. My next attempt will be to nail some 1/4 round shoe molding to the baseboards in that same bath with the 18 ga 2" brad nails. We'll see how that goes!!

[@GDHoneyAcresandCraftWork]

make sure to put a couple drops of air lube oil in before each use for the day. It'll save the nailer

[@jeffenglishsetter8339]

Picked 2 of these up for our Veteran bee keeping program. Working flawlessly. Built 16 deeps and 24 mediums along with frames for all. Not one jam/flaw.

[@GDHoneyAcresandCraftWork]

Make sure to oil them before using for the day. Makes them last a lot longer

[@williambottino1262]

bought it and used it works ok for rough build not finish. no depth adjustment.

[@mrc4912]

I got stuck with a 'lemon', the air piston would get stuck/jammed and it would leak air, so I'm trying to get it back on board.

[@nicolasacervantes4023]

Reduce air pressure and it will be good