CERAKOTE® Professional Ceramic Paint Coating Application Guide

[@Edwinke11ey]

I’m using my wrong KZbin account but I’m here to bout to go LIVE to demo your product.

[@RayNLA]

Nice to see you guys come back with a refined product. Wishing you all the best!

[@CerakoteCeramicCoatings]

Thank you! We're excited about this product!

[@Dudeitsme420]

​@@CerakoteCeramicCoatings is this ur newer version

[@CerakoteCeramicCoatings]

@@Dudeitsme420 yes.

[@carterblanc8191]

Will this work with a primer polish like dr. Beasley nsp?

[@MrSnootyPatooty]

Can you use it on glass and headlights?

[@azimpetra]

👀 ill wait review

[@raul.deanda]

Question: For the final wipe down you say use a IPA, now is that a full strength 90% IPA or would that be a diluted 10-15% solution instead like other prep sprays? Just curious because I know full strength could cause swelling of the paint.

[@CerakoteCeramicCoatings]

Good question. We use 70% IPA.

[@Enthusiast_detailing]

I still have 2 unopened bottles could I get replacements?

[@CerakoteCeramicCoatings]

Yes, just reach out to us at [e-mail] and we'll get you taken care of!

[@williampinchbeck4321]

I have 4 bottles from Christmas that are unopened can I exchange them for this new formula?

[@CerakoteCeramicCoatings]

Yes, just reach out to us at [e-mail] and we'll get you taken care of!

[@RBell12]

Can this be applied to PPF?

[@CerakoteCeramicCoatings]

Absolutely can!

[@MrSfdude]

Any recommended temp and humidity range?

[@CerakoteCeramicCoatings]

Allow the coating to cure for a minimum of 2 hours at 65°F or higher before returning to the customer or exposing to moisture. Allow the coating to cure for a full 24 hours at 65°F or higher before washing. You'll be good to go!

[@trevorgarrett7602]

@@CerakoteCeramicCoatings Can it be applied below 65°? Will the curing time just be longer? Like if I apply it on a dry 60° evening, and leave it in the garage for the night at 50°, will it be fine in the morning? Or does it require the heat?

[@CerakoteCeramicCoatings]

@@trevorgarrett7602 We do not recommend applying it in temperatures less than 65°F.

[@trevorgarrett7602]

@@CerakoteCeramicCoatings ok interesting. Gotta heat the garage or do it during day in the NW. Also means a fully heated garage Oct-May.

[@davepowell849]

Is it ok to apply it during the day temp well above 65 closer to 80 , but will only be 60 overnight

[@05xrunner]

Is this a new fixed formula? Can I send back my original 2pack unopened I bought when it first came out for a replacement of these new ones?

[@CriticuhL_]

Wondering the same thing

[@AlexDetails]

Me too

[@corradopsi]

I contacted them by email 2 days ago actually. They asked for my original order number, then shipped out a replacement without asking for a return. VERY easy to deal with them. 👍

[@CerakoteCeramicCoatings]

It is! And yes, just reach out to us at [e-mail] and we'll get you taken care of!

[@aamvoor]

Nice but did you fix the curing problem. I used the first one. Shine and slickness100% but duribility not so much.

[@CerakoteCeramicCoatings]

Everything has been addressed, and the results are amazing. If you did happen to be one of the people who didn't have a great experience with the first batch, make sure you reach out to our customer service team, so they can get you taken care of.

[@agdom5596]

​​​@@CerakoteCeramicCoatingsmay i knows what is the Base for this new version? Wondering what it coating formula Base on.. Sio2, Tio2, Sic or similar to gyeon mohs evo base(flourine modified polysilazane)? It's sweat / bead up when flash based on your application video.. And what is the chemical tolerance range for this new version? Hope i can get the answer.

[@k.skyl1n3zz]

Can I do 2 Layers? and if so how long do I have to wait for the first coating to cure so I can add another 2nd layer right after.

[@CerakoteCeramicCoatings]

You can do 2 layers, ideally you would wait for it to fully cure before adding the second layer.

[@k.skyl1n3zz]

@@CerakoteCeramicCoatings Also I've heard of the applicator not hardening does that mean the applicator can be reused? (Please answer my questions as I have bought a set already.)

[@CerakoteCeramicCoatings]

@@k.skyl1n3zz Yes, you can reuse the applicator.

[@krawanizky3756]

How much coating are you using in small sections? When the pad is primed 2 drops should be enough for 1-2 panels.

[@CerakoteCeramicCoatings]

We recommend thoroughly wetting the applicator pad upon initial application. When the applicator pad does not easily slide across the panel, it is time to reapply.

[@teslabandit2023]

When will this be available again?

[@CerakoteCeramicCoatings]

It's available now at cerakoteceramics.com/cerakote-professional-ceramic-paint-coating/ at a discounted price of $59.95 for 2 bottles!

[@sfcelicagts]

I would like to try , any sample?

[@CerakoteCeramicCoatings]

We have a free sample offer for professional detailers! Just go to this link and complete the form: forms.monday.com/forms/9fa56b2c8346dad97f3d2c0da69cfcae?r=use1

[@Dudeitsme420]

​@@CerakoteCeramicCoatings also how many years dose this last , customers want to know years not washes

[@adamhedge5987]

All I got was a spray bottle and a towel? !!!!!!!! WTF??????

[@erichughes6119]

I think people are too scared to spend their money on this

[@CerakoteCeramicCoatings]

If this is not the glossiest, slickest, easiest to apply professional paint coating you have used, we will replace it or refund your money!

[@RichardMJr]

@@CerakoteCeramicCoatings ya how long does it last for? You say hundred of washes, but how often do you recommend to wash the car? We talking 200 washes or the 500 that was stated? Can this go through a touchless wash without any issues?

[@edwinnegron7758]

@@CerakoteCeramicCoatings I just put down a coat on my Chevy Equinox this past Sunday. I'm waiting at least till this Sunday to do a maintenance wash.

[@CerakoteCeramicCoatings]

@@edwinnegron7758 we look forward to hearing your results!

[@edwinnegron7758]

@@CerakoteCeramicCoatings so far it has been awesome. been on for two weeks, one maintenance wash and that was a breeze. was hesitant to try it after my first bout with version 1. Live in Florida where weather unpredictable with rain and heat. No topper. the color depth is outstanding. People have commented on the richness of it.