Ceramic Coating Care Part 3 - Touch ups, products to reinvigorate hydrophobics

www.visualprodetailing.com
Are you looking to have a ceramic coating applied? We provide ceramic coatings to everyone from local clients to clients many states away. Please contact us through our website for more information.

[@karlboyer9591]

Thank you

[@devanrogers3133]

Thanks for these videos! They really helped me alot! My secondary car which isn't my daily just had a ceramic coating Proffesionaly applied. Therfore that vehicle only gets driven 3 or so days a weeks. Can I use a light coating of the Teqnik Touch Up Spray every time I wash it? I will probably only be washing once a month just because it doesn't get dirty enough to do it anymore than that.

[@gaycha6589]

Does the polymer that ONR lays down, interfere with the Ceramics?

[@danfelipe7331]

Is opti-coat pro plus the same as all the ceramic out there? What sealant would you recommend?

[@sergioamaya5228]

Can you link the products in the description?

[@jjjjjjjjjjjhjjjjjhjj]

So what is needed to perform yearly maintenance cleaning on crystal serum light ???

[@koraykahraman5973]

Dear Sir, can we use Sonax or Turtle Wax or any brand High Speed Wax while drying after washing process of ceramic coating?

[@baba7415963]

can you use turtle wax hybrid ceramix wet wax for touch ups on an IGL Kenzo coated car?

[@SensibleBHPian]

Please correct me if i am wrong. Post washing and using Iron X to decon the paint if we observe minor swirls due to maintainence washes how to get rid of them? You mentioned that post washing and drying use C2V3 which is a spray sealent but if there are swirls and all dont you think we need 1 more step in between to remove them and then apply C2V3. I am thinking from a maintainence point of view that using a spray sealent on a car which is clean but has minor swirls shouldnt they be removed first? And if that is the case then which product would you reccomen for that. Please note i am a amateur detailer still learning mainly for my own vehicle. Can we use products like Essesce Plus or is there another product you would reccomend(Please note i dont have DA polisher so any product i will be applying by hand)Would appreciate your response

[@khd8667]

Add products link in description

[@RebelDylan]

Sorry if this question has been asked...what can I use as a booster for CeramicPro?

[@googlast6085]

Ceramic pro care they sell it on there website

[@donswain7859]

What if I don't know what ceramic coating was applied. Can I use either of the boosters u talked about?

[@taylor315]

Yea it doesn’t really matter. As long as it’s some sort of si02 booster. Right now I like to use CarPro Refresh spray but they all do the same thing. Some last longer than others but if you apply your topper every couple months you’re good to go no matter what.

[@TyroTalks]

just finished with a ceramic coating and noticed stone chips. Is there a way to touch up the paint without damaging the coating?

[@VisualProDetailing]

The paint will likely bond to any areas coated without any issues.

[@brandonjulio4067]

I absolutely loved using chemical guys Speed Wipe before I got my car ceramic coated. After a normal wash I’d spray it down quickly and wipe it and it SHINED like a mirror! Will this still be an option after ceramic coating my vehicle (after the couple weeks curing process) or will it not effect it the same since the paint is now coated?

[@VisualProDetailing]

Should be fine, but might want to check out what products the coating company that your car is coated in offers, would likely blow away the speed wipe in performance and work better on your coating.

[@brandonjulio4067]

Visual Pro Detailing thanks for the response ! Yep I have it ordered: Car Pro: Reload

[@TMDFYM]

Is Chemical Guys EcoSmart safe for ceramic coated car? (CarPro Gliss)

[@Supep007]

how to remove water spots on coating?

[@RebelDylan]

Did you get rid of the water spots? I have water spots on my newly coated car.

[@travyyung]

Do you have to dilute the C2V3?

[@richardhurr31]

travyyung No, but it's more prone to streaking. If you dilute it then longevity will be affected though.

[@gaycha6589]

Dilute it with distilled water

[@RodeoRides]

What’s your thoughts on McKee’s hydro blue.

[@VisualProDetailing]

Tpr1634 I've heard good things about it, but never personally tried it.

[@Whofan70]

I used McKee's Paint Coating and it's great. Very easy to use. I now use Hydro Blue after washing my car. Hydro Blue is easy to use and enhances the hydrophobic effect. Love it.

[@lobbyrobby]

Thank you