CEREC Stuff: How To DESIGN AND FINISH A Single Unit Posterior - Back To The Basics

  Рет қаралды 34,447

Weston Hatcher Design

Weston Hatcher Design

Күн бұрын

Пікірлер: 34
@kennybrown6203
@kennybrown6203 3 жыл бұрын
This video is a lifesaver for a new user like me who only had one day of instruction. Thank you so much!
@blotterson87
@blotterson87 2 жыл бұрын
SAME!!!!!!
@voicebybeautyllc.117
@voicebybeautyllc.117 Жыл бұрын
Excellent Weston!
@arash_LA
@arash_LA Жыл бұрын
3rd year dental student here. Great video! Thanks!
@nmda9578
@nmda9578 4 жыл бұрын
Fourth year dental student here, a few months away from working in an office with CEREC. This whole video is super helpful!
@charlesreyes6011
@charlesreyes6011 Жыл бұрын
Thanks so much Weston! Great video
@Nightingal.
@Nightingal. Жыл бұрын
Amazing video. Best one. Very very helpful.
@madhurshiralkar5440
@madhurshiralkar5440 3 жыл бұрын
Awesome information and tips Weston!
@blotterson87
@blotterson87 2 жыл бұрын
Thank you for the information!! It was very helpful.
@nicovoitec
@nicovoitec 4 жыл бұрын
Loved the video, lots of great info, thanks for sharing!
@goeldental3196
@goeldental3196 3 жыл бұрын
Very informative video Weston..just about to start milling my crowns so Im sure I'll need all of it. Thanks
@ReneeWatts
@ReneeWatts 4 жыл бұрын
Great video! Thank you for all the tips.
@K3VSHANNON
@K3VSHANNON 3 жыл бұрын
Excellent video! Cheers mate thank you very much!
@jessicag.3886
@jessicag.3886 2 жыл бұрын
awesome tips! Thank you! 🎉
@felipenobremoura
@felipenobremoura 8 ай бұрын
Thanks for the valuable knowledge
@preciousbieni6007
@preciousbieni6007 4 жыл бұрын
Great Video!!! Will share it with my co-residents. What are the set parameters for a Katana Zirconia crown and a Celtra Duo crown?
@mehrtuckerdds6271
@mehrtuckerdds6271 3 жыл бұрын
Do you think you will make a new video with the updated version? This video is great to help train assistants too! Just want them to see with our current software verses when we first got the cerec. Thanks!
@richardjordanjr3088
@richardjordanjr3088 3 жыл бұрын
We just purchased the Sirona InEos X5, Primescan and Primemill. Your videos have been incredibly helpful, I just had to mention that to you. (I could not hear the train.)
@machekl
@machekl 4 жыл бұрын
Thanks for the information is great!!!!
@rooogah7014
@rooogah7014 3 жыл бұрын
Very very very nice and easy and useful vedio thaaaaaaaaaaaank you very much thank more than you imagine 🙏🏻🙏🏻🙏🏻
@amandahouseholder718
@amandahouseholder718 2 жыл бұрын
Do you have a video for the gingival mask process?
@paljano1
@paljano1 3 жыл бұрын
Appreciate the Effort of making this video! By and large the Information is helpful but please be aware that the Tips on the Parameters are HARMFUL! 1. If you set the minimal thikness below the factory recommendations you are running danger of the crown cracking or splitting. Dental materials (and all materials) have a minimal thikness for good reasons. 2. If you set the margin thickness higher you automatically get a crown-margin that is overlapping the preparation-margin. hence you get a big edge where plaque will build up and cause parodontitis. Setting this parameter higher has a benefit only when you adjust the crown-margin on a pshysical model to better match the prep-margin. 3. setting the occlusal nad dynamic contact stregth anyhwere away from 0 will cause infra-/supra-occlusion. Meaning you either fitted the patient with a crown that they can effectively not use because it is too low or you will have to grind down the crown in the mouth to a proper hight. Either way you are risking to dislodge the balance of the TMJ of that patient. I encourage you to please reasses the ideas that you posted in the video and maybe even make a new one. Coming from a dentist in Germany with 10 years of practice and 2 years of Cerec-practice designing and seating my own restorations and constantly learning in the process.
@WestonHatcherDesign
@WestonHatcherDesign 3 жыл бұрын
I have a few questions as well... 1. Who says the doc isn’t refining the margins after the crown is milled? The MCXL has limitations... the marginal thickness is set at that level to prevent chipping during the mill process. 2. Do you ever exceed the manufacture’s RECOMMENDED thickness? That would require either very aggressive preparations or we’d all be walking around with crowns that look like inflated marshmallows. It’s a recommendation, not one of the 10 commandments. I have not nor have any of my clients experienced any issues because of setting the minimal thickness at 500 and if you listen to what I teach in the video... setting the minimal thickness to 500 doesn’t mean your crown will be that thickness, it means if you see the bubble you’ve exceed .5mm of thickness which I agree... would not be good. 3. I’m not recommending to take the crown WAY out of occlusion… I’m recommending negative -50 microns I think it was... when your milling a hard glass ceramic such as e.max the mill does what I call bur ricochet… Meaning you end up with a highly inaccurate mill, that’s also what the milling offset is for. We set the occlusal strength to negative so those milling inaccuracies don’t cause high occlusion.
@tuando5168
@tuando5168 4 жыл бұрын
Weston, any helpful tips for premolars? Specifically for "crownlays." Most of my premolar crownlays look like spaceships. IE they are just bulging!
@WestonHatcherDesign
@WestonHatcherDesign 4 жыл бұрын
Reduce minimal thickness... use the biogeneric variation tool.
@744156
@744156 4 жыл бұрын
Hey Weston thanks again for these tutorials. Just wanted to know if you know how to add more implants systems to the inLab database for use with intra oral markers.
@WestonHatcherDesign
@WestonHatcherDesign 4 жыл бұрын
No way to add unless you download a foreign version of the software (not US)... then you get a few more systems that aren’t available in US.
@vanessamares1936
@vanessamares1936 2 жыл бұрын
Do all the settings you changed in the parameter area also apply to zirconia crowns? Since i did notice you were making an emax. Thank you!!!
@laqeshiawilson1496
@laqeshiawilson1496 11 ай бұрын
I have a question, I scan on a omnicam, will these techniques work on that scanner/ software as well? I'm new to all of this and not sure what im doing.....
@davidp9316
@davidp9316 3 жыл бұрын
What setting do you use for occlusal offset? and Adhesive gap? Great video, really helped me with my design!
@bwds7
@bwds7 4 жыл бұрын
Great video Weston! Any tips on adding to the MB of this crown near the margin in order to close the interproximal space and help avoid food entrapment? I currently use the circular tool but I find that when I pull it out, it doesn't pull out at the margin very well and it creates a weird concavity by the margin. Hope this makes sense. A little hard to explain it in words. Thanks again for such an informative video!
@WestonHatcherDesign
@WestonHatcherDesign 4 жыл бұрын
Marginal placement will determine how much you can manipulate. If you have a supragingival margin you will not be able to fill in that area... however when it’s cutting it close the best tool to use may be the “add form” tool... allows a little more freedom than the circular tool. Hope this helps!
@annameyerson8506
@annameyerson8506 4 ай бұрын
Creating restorations - crowns that are “slightly out of occlusion” is a terrible, you ruin peoples bite, it would collapse!
Entire Digital Workflow for CEREC Omnicam Scanner and MC XL Mill for a Single Posterior Crown
15:25
CEREC Software 5 Step Design Workflow
10:09
James Klim DDS
Рет қаралды 52 М.
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
IL'HAN - Qalqam | Official Music Video
03:17
Ilhan Ihsanov
Рет қаралды 700 М.
Shaping in a Single e.max Central Ceramic
15:15
James Klim DDS
Рет қаралды 52 М.
The Perfect CEREC®️ Crown Appointment: What to Know & Where to Start
1:07:49
CEREC vs Dental Lab Crowns:  Is Chairside Milling Worth It?
11:11
Beyond Dentistry
Рет қаралды 53 М.
CEREC PrimeScan Techniques for Better Models
20:29
Digital Enamel
Рет қаралды 19 М.
Anterior e.max Stain and Glaze Workflow for the CAD/CAM Dentists
13:31
MUST WATCH! InLab 19 & MeshMixer: Digital Diagnostic Wax Up
1:02:53
Weston Hatcher Design
Рет қаралды 9 М.
Dental Lab Life: Designing a Crown in 3Shape
10:54
Zahn Dental
Рет қаралды 173 М.
Sirona CEREC 5.1.3 CAD/CAM Dental Training - Design Phase
32:53
The Comprehensive Dentist
Рет қаралды 16 М.
CEREC Equipment Maintenance
7:37
Digital Enamel
Рет қаралды 17 М.
Glaze & Color Options Update
15:20
James Klim DDS
Рет қаралды 3,3 М.
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН