Shaping in a Single e.max Central Ceramic

[@christinasanchez3897]

I love this, I’m a cad/cam dental technician and finish all my work. I work at a prosthetic office with 5drs all have been or are professors at UCLA. This is awesome. I love the digital realm and how fast a beautiful restoration is made. Thanks for the tips and most of all thanks for making your teaching free ! 😊

[@Singhdoc-x4b]

Hi James, what hand held drill are you using. Do you use special tools to accomodate dental burs with the drill? Thanks

[@KlimDDS]

I use a lab handpiece with the JK03 bur kit from Meisinger. Hope this helps.

[@marcuszujev7409]

Super nice work! I am a dental technician myself and I must say you have very good skills in shaping and glazing. I really like your works and videos!

[@KlimDDS]

Thank you, Marcus, I’ve had some incredible mentors through the years, they’re all lab technicians, such as Lee Culp, Matt Roberts, and John Lavicka, I appreciate your comments and will strive to raise the bar.

[@a1gle]

Please doctor i hope you make a video about how to finish a pre-seinterized zirconia crowns 🙏

[@marcoramos4873]

That was amazing, incredibly humbling experience watching your work.

[@KlimDDS]

Thank you so much 😀

[@sarge7108]

Love your passion. Tips are so helpful.

[@KlimDDS]

Thanks so much!

[@mohamadalsharkawy9158]

Sir, what I wanna say and it won't be enough, thank you, just wanted to say it's amazing what you do, not only the hand work but as well sharing the knowledge, my hat off Sir and alot respects, wish you the greatest life ever.

[@KlimDDS]

Thank you, and all the best to you in your journey!

[@jakefatman4876]

👍🇫🇮. You are god’s gift to other dentist as a teacher and of course for your patients. Keep up the good work.👍👍👍

[@4kVideostop]

Great class! Congratulations!

[@davidsilva3906]

Great video! Thanks for sharing!

[@TheDesidentist]

@drKlim do you ever feel you will encroach minimal thickness while shaping up

[@KlimDDS]

@@TheDesidentist Good comment; shaping, as conveyed in this video, required a 0.7 to 1.0 mm thickness. A preparation strategy must be considered when setting up surface morphology and texturing requirements for the case. There will be fewer shaping options when applied to thinner restores.

[@pvtjett]

Beautiful work!

[@KlimDDS]

Thank you so much 😀

[@florianzumwinkel1742]

Im doing my first Veneer Case this week. This is such a great help! Thank you and greetings from Germany!

[@KlimDDS]

Great Florian, best wishes in shaping; it is a skill set that grows with time and experience. Keep at it; you will have something exceptional to give back to your patients. Thanks for the comment. All the best!

[@amarokker]

Super details! One thing I didn't understand (I'm a newbie at ceramics), you polished the crown but didn't glaze it, and still put it into the furnace. Why and what programm did you use? Thanks for answering.

[@KlimDDS]

For this video, the glaze and characteristics are added after the crystallization. In unique blending requirements, there are cases that are best characterized once the final shade and value is acquire via crystallization. On the other hand, with MiYO 850, the glaze and colors can be added to the blue block and achieve a nice out come. Pre glaze or post glaze workflow is applied considering the blend demands of the case. All the best.

[@aroncarvajal7080]

Thank you for your videos, another thing that I do when countering and marking with a pencil I scrape some pencil lead and use it to smear it on the tooth that I am trying to copy, by doing this all the details will stand out.

[@KlimDDS]

Great point Aron. One thing I recommend when observing surfaces and shaping is using a light source from the side rather than straight on, this will provide shadowing and provide improve observation of contours and texture. All the best and thanks for the comment.

[@drkevinharland]

Thanks for the content!!

[@roydfoster]

What lab motor and handpiece is that? Great video, Dr. Klim.

[@KlimDDS]

I am using the Buffalo brushes lab hand piece. LOVE IT!!

[@roydfoster]

@@KlimDDS Thank you! I'll look it up.

[@a1gle]

Hi doc please i have a question if I want to characterize the emax cad using ivocolor is it valid before and after crystallization?🙏

[@KlimDDS]

Yes, I have used Ivocolor on pre-crystallized e.max for years with success. I have now switched to MiYO 850, which is a game changer. All the best.

[@a1gle]

@@KlimDDS so i cant use ivocolor after crystallisation i guess😬🤞

[@KlimDDS]

Yes, you can; it works well and was actually designed for post-crystallization applications. See the following video kzbin.info/www/bejne/fpWvdHyIhc17bKs @@a1gle

[@a1gle]

@@KlimDDS Big love for you doctor and for doctor Todd🥲what huge knowledge secrets of daily practice you sharing really RESPECT💪

[@dongdongdong8413]

thank you master

[@epicx87]

Great From sudan Could you make courses in sudan ?

[@KlimDDS]

Thanks for asking!

[@bearislandjosh5279]

Is that a graded pressed ingot or something? I didn't see any porcelain being stacked.

[@KlimDDS]

This is a machined e.max lithium disilicate monolithic ingot. Once fired, the flexural strength is in the 500 MPa range, and fracture toughness is over 2.0. Strongest ceramic available today. Following the firing, a liquid ceramic will be applied. MiYO is the latest application.

[@bearislandjosh5279]

@@KlimDDS I work with e press every day. I just haven't seen it graded towards the translucent like that. I much prefer lithium disilicate to zirconia, but I stack porcelain to it.

[@agustasugiarto2943]

Thank you so much for what you do you're awesome! 😃

[@chrisnalina1755]

A question: On a fixed bridge if a fake tooth is chipped off the fixed bridge can a ceramic, bonding or porcelain or something else be fused together to the metal of where the fake tooth that got chipped off or must the entire fixed bridge be replaced? In other words it is one fake tooth chipped on a 4 tooth fixed bridge and metal is now showing but can this be fixed without having to get a new fixed bridge? There is no problem with the fixed bridge it is with the chipped tooth on the fixed bridge because of accidently biting onto a fork while eating and chipping the fake tooth that is part of the fixed bridge. Thank you for taking my question.

[@KlimDDS]

Sometimes the chipped piece can be rebounded, it depends on the condition of bridge and occlusal room.

[@walterrldias]

I loved the video, I work with direct composites but will use some of your tips. I try to check the resources link, to see if I could download the model for practice... but I got a warning message: Warning: This URL has been blocked by Bitly's systems as potentially harmful. In any case, if you could share the model, we all would be eternally grateful. txs.

[@KlimDDS]

Hi Walter. There is not a download model of this case. Anyway, thanks for asking.

[@elitaminiea3606]

Thank you

[@alissahanson9159]

I love your videos! How do you get a model to use when doing same day CEREC restorations? We have a 3D printer. Do you scan and print after prepping the tooth? This would add a considerable amount of time to the appointment. Just curious how you do this. Thanks!

[@KlimDDS]

Good quesiton Alissa. Which printer do you have? One of my favorites is the Asiga. The fast print cycle is 16 minutes. If the print is initiated right after the scan, then the printing can be happening during design and milling.

[@drbekkaoui6917]

The boss ,love cadstar

[@antoniorobertodalloca8629]

Belo trabalho

[@Timur.58]

😱😱😱 👍👍👍👍👍👍👍👍👍 super.!

[@JoaoOliveira-eu1ig]

Muito legal manda mais vídeo

[@elringoRS6]

What kind of rpm are you using?

[@KlimDDS]

between 5000 -10000, depending on the bur and polishers at 15,000

[@nickward2791]

Thats great work. However most CEREC docs dont even use a model so how are they ever going to replicate these details

[@KlimDDS]

Hi Nick, this detailed info can be gathered from working in the mouth. Also, good photography will help see the surface texture.

[@kamilbalayev9811]

Good job,😍bravo

[@dmax.no1]

quá hiện đại

[@JAW242]

Just use a proper lab, really... In reality, this is completely inefficient. And you will never get even vaguely close to what a proper esthetic lab can do. It’s a great video to understand how esthetics is achieved but in real world doing it in your own office is completely counterproductive.

[@KlimDDS]

You are free to your opinions, I teach both dentists and laboratory techniques all over the world including the AACD, you may want to attend one day and learn a few things, your comments demonstrate the fact that you have a narrow perception of reality. Wishing you the best in life and don’t spend too much time looking under the rocks, that’s usually not where the answers to success are!