New RevMax 68RFE Valve Body Rebuild

[@kellyyoung124]

Just what I was looking for. Great video. Can’t wait till it’s released.

[@ChadMyers73]

They are putting the finishing touches on packaging now so it won’t be long. Thanks for watching

[@SMOKEY-JAYS-DIESEL]

Always use blue loctite on the accumulator valve plate bolts

[@ChadMyers73]

👍

[@Neverquit275]

Thanks for the Info & Vid Great job Keep up the work myman!

[@ChadMyers73]

Thank you!

[@repairvehicle]

Good job man! Keep us posted how transmission shifts with this kit.

[@ChadMyers73]

Thanks for watching! Will do.

[@trustmebro8500]

So if I don’t modify my 68RFE valve body, but I basically rebuild it to stock. Originally I have a grey connector solenoid pack. Can I use a white connecter solenoid like you did or do I have to use the grey connector solenoid pack? Thanks bro your video is super awesome wish you were my dad. I’m 19 by the way doing this job on my 2018 2500 Ram

[@ChadMyers73]

Gray plug is 5 ball only white is for 5 or 7. Thanks for watching!

[@TheProchargedmopar]

I have a non-tuned transmission with the holes drilled and channel plate hole plugged but it's for a 5 check ball setup, open slot in separator plate. My transmission is a 7 check ball. Will it run this way or do I need to leave 2 out. I have the white solenoid pack. Thanks.

[@garylee8578]

Great video. Thanks

[@ChadMyers73]

Thanks for watching!

[@repairvehicle]

For cutting and drilling you don’t need lube, you need cutting oil.

[@ChadMyers73]

👍

[@FabianCharrua]

Kinda wish you did one for the '19 with the Blue solenoid. Its very similar I guess

[@ChadMyers73]

Sorry man. 🤷‍♂️

[@steveDIY]

is the DIY foundation kit a billet channel plate or is that only with the revmax already premade valve body? Great video, very thorough

[@ChadMyers73]

Yes it comes with the channel plate you get everything you seen in the video. Thanks for watching!

[@carl2591]

did the kit ever come out.. I was not able to find on teh revmax website.

[@ChadMyers73]

Yes, they should be available here is a link for you. revmaxconverters.com/product/item-title-revmax-valve-body-foundation-kit-d-i-y/

[@danielsegovia3274]

Good evening, sorry, the harness colors, gray and white are compatible?

[@ChadMyers73]

Yes with subtle changes.

[@danielsegovia3274]

Hello again, we told you that the gray solenoid was compatible with the white one and you told me that at some point they are the same, thank you. I put it together and it gives me a code P0760, before changing the sensor it gave me P0700 another code besides the TPS, my serious question: do you think I have to change the sensor again or what could I do to correct this fault?

[@FabianCharrua]

Seems like when you put the pistons in there is 0 resistance. Did you check the bores weren't scored? I just bought that same kit at revmax yesterday but Im worry bores may be to big for those seals due to excessive wear from the old seals/pistons and I'll be force to spend the extra $500 bucks for the entire valve body. Maybe when the thing heats up the seals expand a little??

[@ChadMyers73]

Been running for about a year now with no issues.

[@SMOKEY-JAYS-DIESEL]

I was going to say 60 foot pounds 😳🤣🤣

[@ChadMyers73]

🤷‍♂️

[@SMOKEY-JAYS-DIESEL]

@@ChadMyers73 send it 🤣🤣