CHAMPION 2000 WATT - NO SPARK - fixed

[@brentg6210]

Thank you for this video , fixed my problem of no spark .

[@jarm00725]

Thank you sir! This was exactly the issue on my generator. I changed the damaged part and it started right away.

[@shawnandre1111]

Thank you sir. I was just about to dump mines, thank you

[@howardlunsford3140]

Good video I like do it yourself videos most of the time I learn something it is a help for sure

[@davidbrown4868]

Nice, clear explanation. Very good job. Thank you

[@TOURMANBOB]

Thank you. I will keep that in mind if my generator ever starts to give me undiagnosed ignition problems. Not likely as these are very reliable units

[@jasongeo2]

Let me ask you a question? While pull starting does the leds on the module glow a little? Because if they do and the bad ones don't then that's another way you can tell if it's bad.

[@shanwar9844]

Nice job thanks for the info

[@JC-li2xo]

Is this one the same one that was running rough in the other video? Or your other one? Did you ever figure out why it was running rough. I looked for an updated video, or any updated comments but didn't see anything. BTW, you are correct in that a switch is only a switch, unless it is illuminated, then it MIGHT make a difference which wire is which if it incorporates an LED and it is DC being switched. Enjoyed your extensive teardown in the other video. I don't have one of these generators, but I like to look at these kinds of videos before buying, to get an idea how serviceable something is should I need to do it. Thanks, JC

[@DRIFTIN.]

This is the other one. The one that ran rough I put a new carburetor on I got it from Champion online

[@jasongeo2]

My generator like yours not starting now. I swear during pull start I can see the leds glow before the engine takes over. CORRECT?

[@caine-chow]

How did you check the coil?

[@senorpapas7087]

Fuck yeah dude!! 🤟🔥 thank you for this!

[@raptor2011100]

nice I will try it

[@Texasbonekrusher]

Thanks !!!!

[@TheUltimate65]

Maybe thats the problem with may kipor ig 770, i have replement the coil, its was one time the ignition too start, but after that its was hopeles agin, its no spark now ..

[@jeffreylombard7599]

I am not finding this part anywhere. Can you send me a link please? Great video!!

[@DRIFTIN.]

Call Champion at 877-338-0999 to get the part

[@jeffreylombard7599]

@@DRIFTIN. thank you. Called $22.00 bucks just got the part today and tadaaa!! She is running. Thank you!!

[@MrChicagoRon]

Where did you get the part?? I cant find it.

[@DRIFTIN.]

I got it from champion online but you have to call them 877-338-0999

[@DRIFTIN.]

shop.championpowerequipment.com/en-us/search?q=81.126000.00

[@hmaxp2652]

should also check the oil level sensor before you go too deep

[@DRIFTIN.]

Call Champion at 877-338-0999 to get the part

[@chachacheng9380]

Bad model !

[@DRIFTIN.]

UPDATE Here is where to order the part shop.championpowerequipment.com/en-us/search?q=81.126000.00