In this video I show how to replace a hinge clutch brake on an Eaton 8LL transmission. I attribute my successes to god and give him the glory.
Пікірлер: 35
@OriginalCoalRollers5 ай бұрын
Sitting next to my tool Box now with a clutch break in one hand and phone in the other learning how to install it lol, this is new to me, I just put a transmission in this truck, new clutch and resurfaced the flywheel, now it all need to go back together
@johntorres67263 жыл бұрын
Thanks for the video, It did help me understand how remove and install the clutch brake.
@JasonTheMunicipalMechanic3 жыл бұрын
No problem. Thank you for watching.
@Hiim0094 Жыл бұрын
Im under my truck right now typing this😂 Thank You!
@vne51952 жыл бұрын
*That part at **5:45** was great. The whole video was informative but that part at the end really showed the operation of the clutch brake in way that transcends words. Thank you!*
@JasonTheMunicipalMechanic2 жыл бұрын
No problem glad you liked it. I thought it would be interesting to show how It worked. Thank you for watching I appreciate it.
@MartinGarcia-xn8vo Жыл бұрын
Thanks buddy
@vontaetownsend28582 жыл бұрын
Great video
@AlexD-fq5zm3 жыл бұрын
You ever hear a rattle from the 1 piece torque limiting clutch break?
@JasonTheMunicipalMechanic3 жыл бұрын
Not that I’m aware of.
@dulian084 жыл бұрын
You have a big play in your input shaft pilot barring maybe that’s why your going through them so much .. My best guess is that your pilot barring is bad and is causing play in your input shaft . By now your input shaft neck barring is worn out causing it to flop around .
@JasonTheMunicipalMechanic4 жыл бұрын
This is actually the truck from my flywheel housing replacement video. The pilot bearing was good the problem was the driver was pushing the clutch all the way and engaging the clutch brake while still moving. Its been fine since I asked him about it. It’s understandable when plowing you get in a hurry plowing intersections and it’s a lot of back and forth while dodging traffic. I appreciate your help though. I’ll keep that in mind if it comes up again. Thank you
@jasonlightbearer3353 жыл бұрын
What are the symptoms of a bad clutch brake?
@JasonTheMunicipalMechanic3 жыл бұрын
It won’t stop the transmission so you can put the vehicle in first or reverse without grinding the gears. If the clutch brake doesn’t work the transmission input will keep spinning and from a stopped position it will grind going into gear. If you can spin the clutch brake disk on the input shaft then it is bad.
@jasonlightbearer3353 жыл бұрын
Thanks for the quickest reply ever dude . Yea my truck gives issues with going into gear when trucks been running for a while . I’ve changed everything and nothing
@vontaetownsend28582 жыл бұрын
@@JasonTheMunicipalMechanic how do you know the difference from a bad clutch brake and needing a adjustment
@JasonTheMunicipalMechanic2 жыл бұрын
The clutch brake should not spin on the input shaft if it does it’s bad and not an adjustment issue. If it doesn’t spin on the shaft then with the clutch depressed fully you should be able to put a .010 feeler gauge between the clutch brake and the throw out bearing and it should get pinched between them and be held in there when you depress the clutch. If it doesn’t then the throw out bearing isn’t traveling far enough and needs to be adjusted.
@vontaetownsend28582 жыл бұрын
@@JasonTheMunicipalMechanic my mechanic is telling me i need a new clutch but I haven’t had any problems with up until today
@bob758194 жыл бұрын
mine fits in loosely also
@JasonTheMunicipalMechanic4 жыл бұрын
The quality of things these days is just not there anymore. It’s getting disappointing. Thank you for watching.
@stevenrice50493 жыл бұрын
Right on, didn’t know it was that simple. Thank you for the video
@JasonTheMunicipalMechanic3 жыл бұрын
No problem. There are a few different styles. This is just one type.
@marcvalliant8131 Жыл бұрын
Thanks for showing how it works at the very end. Wrapped my mind around the concept now.
@dulian084 жыл бұрын
Happened to me already that’s why I know about it . I couldn’t keep one one for 2 months. Good luck .
@edwardgduran3957 Жыл бұрын
thanks for the video!!!
@jesusayala25932 жыл бұрын
Good job, thanks.
@steventeran4213 Жыл бұрын
I got a peterbuilt with an 8LL. Do all 8LLs use that same clutch brake?
@JasonTheMunicipalMechanic Жыл бұрын
It depends on the input shaft size. Also there are a few different types so the one you have may be different but I believe they are interchangeable.
@johnsonberry67503 жыл бұрын
Whats the thickness of this clutch brake u just install ?
@JasonTheMunicipalMechanic3 жыл бұрын
Im sorry I’m not sure the thickness and I don’t have an extra one to measure. The clutch being out of adjustment can be a reason the. Clutch brake doesn’t work also. With someone holding the clutch pedal down it should be able to hold a .010 shim between the clutch brake and the throw out bearing. I have a video on how to adjust a clutch and it goes over that.
@officialtonytone3212 жыл бұрын
Sheesh man thanks for saving me 1,000$
@JasonTheMunicipalMechanic2 жыл бұрын
Good lord that’s a lot of money. Glad I could help.